Bosch GLL380-CG laser level outside on sunny day LR7 receiver
HTML-код
- Опубликовано: 12 сен 2024
- Reducing a hedge outside using the Bosch GLL 380 CG & LR7 receiver
Amazon link
amzn.to/3rxtYzX
Amazon tripod link
amzn.to/3IgUd3n
Amazon links don't cost you anymore but it helps my Channel grow if you can use my links.
Bosch GHO 12V-20 planner amzn.to/3ooQJE9
Bosch GKS 12 V-26 circular saw amzn.to/3y2BjJ2
Bosch GLI 12V-330 cordless construction floodlight amzn.to/32ZRxHo
Bosch GWS 12 V-76 Cordless Angle Grinder amzn.to/3Ilgr4j
Bosch GSA 12 V-14 Cordless Sabre Reciprocating Saw amzn.to/3Eu5VFC
Bosch Laser Receiver LR 7 amzn.to/3GcYRgV
Bosch Wall Scanner D-tect 150 SV amzn.to/3rAQ0Sr
Bosch GKF 12 V-8 Brushless Router amzn.to/31vsH1c
Bosch GCD 12JL Metal Cut-off Saw amzn.to/3G9bI3M
Bosch Professional 12V System Laser Level GLL 3-80 Cg amzn.to/3rxtYzX
I picked up a cheap Huepar for $50, and it seems to work as well as ones 4-5x the price. In this situation, that seems a poor way to do that job. I would have set up my laser and got my level, then a couple of stakes and a string line. Then you just cut above the string line.
Yes I have done that in the past, I was just showing a different way to level a hedge. The trouble with a string line over that length is the sag in the line no matter how tight you have it. Thanks for the comment
The Hupar dual green laser for $50 seems to rival the $200-300 Milwaukee's, etc. However outside I can barely see the line against the house from 20'. Even the laser used in this video which is top of the line is very faint at less distance than that. Keep expectations in check, working with a laser outside during the day is going to require you to use either a laser receiver or one of those green reflectors. I have to check, however a piece of black construction paper will probably work good as well.
Yes in bright sunshine laser line are hard to see. The main difference when you go up in price on these tools is the lasers accuracy over long distance (2mm at 10 meters) as this goes out to 120 meters with a receiver and 30 meters with out.
Why not run a string line off the laser next time - will save you having to hold the paper/receiver the whole way along the hedge
I’ve tried string lines in the past and you find they either get hooked up on the hedge without you realising it until you finish or you cut the line :)
@@PhilipHollowaychannel you can also spray a color line instead holding the paper
@@Punchlined I haven't done this, however the string line seems like it would work, although the paint idea is pretty smart since its going to be cut anyways.
😂oh yeah, health and safety at work, watch you don’t cut your fingers! 😮
It looks worse on camera :)
How far away from the laser do you figure the far end of that bush was?
At a guess I would say 30 meters
So does it work good on sunny days? Thank you
Yes if the line is in shadow or a white Piece of paper. But if you have the receiver it works perfectly in full sunshine. I’m still very happy with it
@@PhilipHollowaychannel thank you sir... I owe you one.
Hi! Link for Tripod please.
www.amazon.co.uk/gp/product/B07Q2WKPMN/ref=as_li_tl?ie=UTF8&tag=philiphollowa-21&camp=1634&creative=6738&linkCode=as2&creativeASIN=B07Q2WKPMN&linkId=4c78ff14c74594d7f8e86b0a721e4e7f
Does that receiver work vertically
I’m in Scotland for a couple of weeks, but I can check when I’m back if it helps?
WTH man.... just use a string line... one slip and you a finger less...
Too close to your hand accident waiting to happen
The camera makes it look a lot closer than it was. There’s a lot more dangerous things in gardening than this. :)
Phillip would have to have had a seizure to cause the hedger to push through brambles of the hedge before it would have contacted his hand. In that case he would likely have worse things to worry about. Garden with abandon Phil!