Dart Zone Max Stryker Easy Cheap Mod Guide
HTML-код
- Опубликовано: 30 июл 2021
- Removing de-prime lock, improving barrel seal, making and adding a spring spacer to boost FPS.
Check out our Dart Zone MK II mod guide:
• Dart Zone Pro Mk 2 Lem... 
Развлечения
![Dart Zone Max Stryker Review - High Powered Nerf Sniper [4K]](http://i.ytimg.com/vi/xCc3TmsanqA/mqdefault.jpg)
![Dart Zone Max Stryker Review - High Powered Nerf Sniper [4K]](/img/tr.png)
Just getting into the higher powered nerf guns. This was exactly what I was looking for…very informative, well explained and clear. Thank you so much sir, keep up the awesome vids!!
Thanks
Underrated video I never knew about there being a picatinny rail inside the grip😂
Definitely going to have to get me one of these. My Nexus is now a dedicated high-fps blaster and I would like another kid-friendly one.
It's sweet. Rail attachments are useless. Stock is good. Still fits the worker SCAR. Big fan of the horizontal front grip.
Almost 150 FPS is not exactly kid friendly but yeah tamer than a modded one👍
Thanks for the vid! I think the hobby benefits from mod guides like this.
Thank you!
Kudos for making an excellent video. Clear, concise, informative, and helpful.
Thank you
Came across you in my reccommened tab, you are a cool dude. Keep up the nice work! I look foward to seeing more from this channel!
Thank you!
Concise, informative, great insights, and really DIY. Subscribed!
Thanks!
Great mod guide it helped a lot your channel needs more subscribers
Thanks!
Thank you, that was exactly the mod guide I was looking for. I removed the de-prime lock from my Nexus a year ago, and wasn't sure I'd recognize the piece. That's coming out as soon as have time. I don't know why they think people want to dry fire their blasters to de-prime.
That lock acts as a safety feature. If you pull the trigger while half-primed the spring will send the whole bolt and pump grip forward at full tension after you remove the lock. Make sure you hold the pump grip and let it forward slowly.
if they had the entire system sealed we could just stick a finger inside the barrel to de-prime the blaster without smashing the pistonhead onto the rubber padding inside the plungertube
Just got a nexus, but these are so cool, probably gonna pick one up pretty soon... great video! 👌
Thanks!
the lock you removed was one of the first things i dig to my nexus pro. its a much better blaster without this lock.
also the epoxy part between dart guide and barrel is very important. i used some tape around the barrel, pressed it in the dart gate, removed it again, put a small drop of superglue (gel) on the tape and put it back together while twisting the barrel for an even seal.
i also taped the front of the barrel where it meets the plastic ring in the front, and i wrapped the outside of the ring where it locks into the shell with tape, too. now everything is a snug fit without ANY play.
precision is much better now... awesome blasters when using any kind of SCAR or BCAR. personally i use a 3 string 80mm worker scar with the original flash hider (removed the friction fit part and sanded down to friction fit the worker SCAR). now it looks stock but has a ridiculous precision for a dart blaster.
another thing i did was extending the push button for the black locking bar directly under the picatinny rail for easy access and dremeled down the 2 huge magazine release levers (the one for full lenght mags is only sticking out of the blaster about 3mm to pull is with a fingernail) on the short dart adapter i dremeled dowm the lever for a total lenght of 1 inch. i also removed the upper notch and spring for the dart zone magazines. now its an easy push with only one spring for a way easier removal of the magazine and cut another hole on the back of the dart zone mag (like on a talon magazine)
Excellent video man!! Gonna use this tutorial when I get my max Stryker here later today👍
Excellent!
This is something am going to have to do but am freaked out by opening my guns like that lol.
You can do it!
This is what I needed. Thanks!
Our pleasure!
Great tips, thanks!
On the back of the plunger there is a plastic washer thing and u can put it on backwards to increase the preload of the spring note that is will wear out the spring faster
Some constructive criticism. It would be great to show the viewers a before and after by shooting at a target or use a chronograph to see how much fps it's putting out. Overall, a good mod tutorial.
Nice, I've subbed!
Well, thank you!
I would definitely recommend replacing the stock aluminium barrel with a 12" 17/32 brass tube, super easy to do and a very noticeable FPS increase 👍 keep it waxed also
Great idea. I use a wood polish like pledge to keep my brass barrels lubed. The reason I didn't include this is because it's a "cheap" mod guide.
Hello I’m new to nerf and this gonna be my first real mod. I noticed stores that sell the brass barrels already prepped have 10” brass because of barrel drag. I also read that if you use an upgraded spring a 12” might be better do you have any idea what would be better
The stock barrel isn't that bad. I've brassed one in 12" and the difference is negligible. So many variables involved. Best advice i can give is do some experimenting and find what works the best for you.
@@daddydaughternerf5300 I ended up knocking it down to 10” and I’m having a blast with it but I can’t get a seal like I see others get
Ok, i wasn't planning on moding mine... its already super spicy... But that de-prime lock I will definitely remove! Hated dry firing it to allow me to remove the mag after the fact....
Good luck!
Did you know the button on the top rail helps to de-prime the gun. But mainly it is to remove jams. However I just use that button everytime I load up my stryker
Yeah, but it's hard to get your finger in there tactically.
There are safety deletes you can print if it's the same dimensions as the nexus / aeon
Not sure if the dimensions are the same but if they're not, I'm sure new ones are being worked on if not already available.
What’s the longest length of pcvc can u use? What’s the best length to use for add power/stay constant.great video
I wouldn't go longer than the spring retainer. So maybe just under an inch. You'll have to experiment with lengths to get the performance you'd like.
I did the Prime delete tip but I'm not sure what it did? I have the gun back together - it works. I pull back the pump grip (prime it) and then push it forward (now primed right). It's now locked until I fire. I'm not really understanding what that mod does? it seems to act the same as before.
This mod allows you to half-prime the blaster, then hold the pump grip while pulling the trigger and let it forward slowly. Useful in taking out an empty mag and then storing the blaster de-primed. If you've full-primed the blaster, you'll need to depress the lock on the top of the blaster to return it to half-primed, then pull the trigger and let the slide go forward slowly. It saves wear and and tear on the blaster by not dry firing it.
I've recently moded my Stryker and Nexus but now I'm getting a problem where when I fire them some of the darts get straight cuts on them causing those ones to stop in the barrel. The other darts fire perfectly fine but I do notice a score imprint on where they would have cut open. Did you have this complication too and if so do you know what could be the issue?
By straight cuts do you mean the dart is cut down the side and its ripped all the way through to the inside? If so, you're probably popping the darts from the inside because of too much pressure. If that's not the case, then there must be something somewhere that is scraping the dart. Let me know if this helps or if I totally missed the mark.
@@daddydaughternerf5300 Now that you mentioned it I did add a spring upgrade and a spacer so rupturing might actually be the problem. However I have an MK1 that I haven't touched at all and some of the bullets seem to be doing the same thing. I may have forgotten that I've interchanged the bullets but I'll still downgrade the Nexus and a stryker to see if that'll fixes the problem. I haven't seen any videos of anyone mentioning rupturing with their upgrades so I never considered it, Thanks for the suggestion.
I've definitely had this happen on higher powered blasters. The cheaper or older the dart, the worse it is. Its also worse for full-length darts than half-length, but still happens occasionally with half-length.
Great video 👍
What is the size of pvc pipe?
1/2" CPVC
@@daddydaughternerf5300 thank you
I thought you cut 1/2. So size is also 1/2.
✨👍✨
Yes, I cut a half inch section of 1/2" CPVC pipe. You can cut different lengths for different results. Good luck!
@@daddydaughternerf5300 thank you 😊
Did you say use 1/2 pvc? Cus if so that size was too big. I cut like you instructed. Pls lmk if i was wrong thanks
Its 1/2" CPVC. Or anything you can find that will fit and not be crushed by the spring.
@@daddydaughternerf5300 ok cus i swear i cut exactly size you recommended and the 1/2 is too big the spring goes right into it. Iam i doing it wrong? Sorry to bother ya
My mistake Iam using 1/2 pvc and that different in size then cpvc? 1/2?
No bother at all. Yes, CPVC is a different size.
At the end we’re you put the stuff on the back how much does it increase the FPS
It varies with the length of the CPVC you cut. I would approximate 10 fps per quarter inch. I'll link a video where we tested different lengths on a Nexus Pro, which has similar results.
Here's that video:
ruclips.net/video/dotbThTCoP0/видео.html
What kind of epoxy do you use?
5 minute 2 part epoxy.
My guns trigger won't work its like stuck
Can you be more specific about the trigger on your blaster? Have you tried to mod the blaster?
Yeah it does not pull back and my pump dose not go back all the way
Huh. Sounds like you have it reassembled incorrectly. Check the placement of all your internals and keep trying.