Add regular table salt or salt crystals between pavers to kill roots, prevent germination & weed growth. Snow, rain or watering w/a hose will continually dissolve salt crystals. Pellets take too long to break down unless they are crushed into smaller pieces before use.
These mold can be bought off net, I USED Lazada in Philippines. They come in various sides, mortar not REALLY GOOD, cement just as east and stronger,1 cement 3 sand, Vera small rocket 3,1-2-3 Will do it and strong
Portland cement + sand=- mortar. Type M & N mortar in the U.S. are load bearing and extremely strong when cured. People who talk about mortar not being strong (especially holding an occasional 200 lb body walking on it need to do their homework.
I used this mold. 230 bags of premixed concrete and four years later. The best way is to do this is on a couple 24"X 24" plywood and let them dry. Place them the next day...repeat. Let the weeds and ants destroy your work :(
thats what I was thinking to do as I bought 2 moulds in thailand and not easy to get paviers here. Was also thinking to try sika 212 grout. Not easy to get good aggregates here its stone 10mm or sand, cannot find "dust"
So could you just use the mold as a kind of stamp? Like pour cement into a solid form and just use the mold to push into the cement to make a fake rock image so you don;t need to have individual stones but looks like you do? I hope this question makes sense lol. It just seems like it would be faster and you would already have a border built in...
It will work if you don't press down all the way and just use it for a quick/small imprint for a concrete walkway without sand filler, other than that there is too much excess concrete for a full imprint. As others are saying too, don;t use his mixture it looks great but won't last. Use a strong concrete and be sure to finish it smooth and spray with water for a few days touching it up each day, this will give a great finish and it will last.
It looks like what we call D.G., decomposed granite. Mulch is organic matter, usually used to prevent moisture loss and hinder weeds from sprouting. It would eventually decompose and settle, whereas the D.G. is mineral, like sand, it can be compressed and used as a hard surface for walkways.
I am a General Contractor and cringe watching him use mortar. That is going to break and crumble within a couple years. The best product for long term durability is reinforced concrete.
I just put a reinforced concrete strip, my first concrete job ever. I really didn't stand a chance of turning out decent product, because the sun baked it to a hard finish almost before I got the job complete, using the mixing instructions on the side of the bag. I used 5 bags of quikrete in the yellow bag and mixed them by hand. I had an area sag a little, and was told to use non-shrink precision grout mixed with an adhesive in an almost liquified state to level the surface. I noticed today there were some cracks already. I was thinking about using mortar, because the next step in my project is to use a two quikrete templates side by side for 31 feet, and the mortar has a very nice cosmetic appeal. Despite my best efforts of working with the water mixture in the concrete mix, it came out with a rough grainy surface, and the grout to level it afterwards gave it a smooth finished look.
Todd Landry I am going to do this next week but use the orange bag of Quikrete (reinforced). THEN, I am going to use mortar (type S) between the stones. Do you think this method will last a while?? I am doing it around my fire pit at a vacation rental so it will get some heavy traffic. Thanks for your advice!
This fucking guy doesn't care to respond to anybody's questions I see. This looks like straight cement and not concrete, so I am guessing this will last about a year if lucky - but it looks nice!
QUEDA MUY LINDO, PERO PARA EXPOSICIÓN, ...EN CUANTO PISEN EL BORDE SE SALE TODO DE LUGAR. ...LA SOLUCIÓN,.. HACER DOS PERFORACIONES TIPO EMBUDO EN CADA PIEZA, ANTES DE PONER CEMENTO O MORTERO DESPUÉS HACER UN BORDE LISO Y RELLENAR LA JUNTA HASTA LA MITAD DE LA PIEZA..!!
ill make my own....first put and spread a first layer maybe 2 inches thick then secondly the mold...the 1st layer acts as base and binder so it wont seperate...thats how should do it
Love, love, love! You laid it in random form which is pleasing to the eye and has no repeating pattern. Hope others are watching and learning
Add regular table salt or salt crystals between pavers to kill roots, prevent germination & weed growth. Snow, rain or watering w/a hose will continually dissolve salt crystals. Pellets take too long to break down unless they are crushed into smaller pieces before use.
Excellent Job!!! Labor of love.
Hose off the mold after each paver will prevent dried cement on the mold
I used the same aggregate under mine. That was ten years ago! Still looks great!
Mi pregunta es si haciendo las cosas con ese molde si se puede poner una mesa o unas sillas o algo así y que quede bien firme?
Taşlara Beyaz rengi nasıl verdiniz?
Taş aralığını(gez dolgusunu) ne tür malzeme ile dolduruyorsunuz!
Very good. Wellcom to you thành phát tv thanks
How is the mixture of this con-grid? Love your work.
Hasilnya sangat memuaskan... 👍👍👍
These mold can be bought off net, I USED Lazada in Philippines. They come in various sides, mortar not REALLY GOOD, cement just as east and stronger,1 cement 3 sand, Vera small rocket 3,1-2-3 Will do it and strong
Portland cement + sand=- mortar. Type M & N mortar in the U.S. are load bearing and extremely strong when cured. People who talk about mortar not being strong (especially holding an occasional 200 lb body walking on it need to do their homework.
451 concrete pourers watched this video.
Nice back fill.
How long should you wait to lift the mold ?
5 minutes clean mould after 2 uses to remove any concrete
Como lo hago en las terminaciones si lo que quiero es cubrir toda la superficie?
I used this mold. 230 bags of premixed concrete and four years later. The best way is to do this is on a couple 24"X 24" plywood and let them dry. Place them the next day...repeat.
Let the weeds and ants destroy your work :(
thats what I was thinking to do as I bought 2 moulds in thailand and not easy to get paviers here. Was also thinking to try sika 212 grout. Not easy to get good aggregates here its stone 10mm or sand, cannot find "dust"
Kako da poručim jedan plastični kalup za baštenske staze ?
So could you just use the mold as a kind of stamp? Like pour cement into a solid form and just use the mold to push into the cement to make a fake rock image so you don;t need to have individual stones but looks like you do? I hope this question makes sense lol. It just seems like it would be faster and you would already have a border built in...
My son tried that..didnt work at all
Evone yes you can do it that way
It will work if you don't press down all the way and just use it for a quick/small imprint for a concrete walkway without sand filler, other than that there is too much excess concrete for a full imprint. As others are saying too, don;t use his mixture it looks great but won't last. Use a strong concrete and be sure to finish it smooth and spray with water for a few days touching it up each day, this will give a great finish and it will last.
Looks good but not sure a coarse sand base would be my foundation of choice for that
Exellent and so good
Cum și cu ce material se umplu rosturile dintre pavele
por lo menos me podrían decir de qué material es el molde?
Buenas noches, como puedo conseguir estos moldes?
Very nice ! The mortar what is made from? Thanks
디딤돌 모형 고무판 어디서 구할수 있을까요?
Your work is good. I should try it out.
nice skilled hands
Где можно купить такую решетку?
Onde encontro essa peça ,?
Adonde conseguir esos moldes para piso
What type of dye did you use?
Mấy khuôn này mưa đâu có vậy bạn
is that mulch underneath? I love the look of these. Where do you buy these?
elainieg - lowes or home depot. Got mines easily from Lowes. Goodluck!!
It looks like what we call D.G., decomposed granite. Mulch is organic matter, usually used to prevent moisture loss and hinder weeds from sprouting. It would eventually decompose and settle, whereas the D.G. is mineral, like sand, it can be compressed and used as a hard surface for walkways.
Very very nice 💯👍👍👍😉😊😇
Круто тоже купила такие,попробую
Very nice 👍
What kind of concrete are you using
Only cement,sand and hardener
With out any aggregate it will fall apart in no time. With aggregate, you couldn’t finish it as fast.
dapat alat ini gimana
Good i like
Интересно, сколько он трудится в неделю...?
DÒNDE PUEDO CONSEGUIR ESOS MOLDES? ALGUIEN QUE ME INFORME POR FAVOR.
Eu tenho comprei na internet muito bom mercado livre
素晴らしい手際ですね！
私もこれからやろうと考えてるのですが、動画のようなちょうど良いかたさにするには、どんな分量にされているのですか？
takaomi mabuchi
初めまして。モルタルの硬さ調整は水の分量を少なめにして詰め込む方法と、モルタルを練る時に硬化材を使う方法があります。ちなみにこの動画のモルタルは硬化材を使っています。
返信ありがとうございます！
こちらはこれから初めて挑戦しようとしているので、大変参考になります。
水分量は自分で見出すとして、もしよろしければ、何という硬化剤をどれくらいの分量でお使いか教えていただけないでしょうか？
お近くに左官材料店があれば硬化材（品名プラスエイド、ハードンエースなど）があると思います。
なければAmazonでハードンエースなら購入できます。分量については、目安としてセメント25㎏1袋に
ハードンエースなら1～2袋混入。もちろん沢山量を増やせば硬化スピードは速くなります。
ちなみに私は仕事でよく硬化材を使うので感覚で混入してます。
使用中にモルタルが硬くなりだしたら少し水を入れれば調整は出来ます。
なお、下地はコンクリートより土の方が地面に水分を吸うので早く乾きます。
また分からない事があれば分かる範囲でお答えします。
頑張って作業をしてみて下さい。
丁寧に教えて頂きありがとうございます。
なんとか上手く出来るようやってみます。
Supposed to be concrete, not mortar, probably will not last long.
Tina Leanne testto diario
It will crack and dissentigrate over time.
Not if you PVA mix it.
Will not crack and will be very flexible and water tight.
Que bonito ! E mandado a mi hermana ella tiene casa
Yo tengo el molde y ya hice un piso hace un año me gusto
nicely done
lay chunks of concrete next to each other on the ground, right, I wonder how that'll look later?
Cum pot să cumpăr
this is great
Neat I did concrete but your look smoother
Super excelent
I am a General Contractor and cringe watching him use mortar. That is going to break and crumble within a couple years. The best product for long term durability is reinforced concrete.
LOL, I'm with you!!!... Sadly today the people love the WOW factor for their 4th of july party or so and say oh well we'll worry about that next time
I just put a reinforced concrete strip, my first concrete job ever. I really didn't stand a chance of turning out decent product, because the sun baked it to a hard finish almost before I got the job complete, using the mixing instructions on the side of the bag. I used 5 bags of quikrete in the yellow bag and mixed them by hand. I had an area sag a little, and was told to use non-shrink precision grout mixed with an adhesive in an almost liquified state to level the surface. I noticed today there were some cracks already. I was thinking about using mortar, because the next step in my project is to use a two quikrete templates side by side for 31 feet, and the mortar has a very nice cosmetic appeal. Despite my best efforts of working with the water mixture in the concrete mix, it came out with a rough grainy surface, and the grout to level it afterwards gave it a smooth finished look.
Bill Taylor - supposed to use polymeric sand between the cracks. Then shower the sand lightly. It will bind the concrete even better. Goodluck!!
Todd Landry can i put this on my concreted yard
Todd Landry I am going to do this next week but use the orange bag of Quikrete (reinforced). THEN, I am going to use mortar (type S) between the stones. Do you think this method will last a while?? I am doing it around my fire pit at a vacation rental so it will get some heavy traffic. Thanks for your advice!
Perfeito, gostei
All mortar? I bet these have crumbled by now, or will soon...
Good job
That could have been condensed in a 30 second video.
buenos videos
construccion
wok#1
Bravo
Next year, those wonderful weeds pop up in the cracks...nice !
어디서팔아요?
Nice job! I'm making my own currently.
S V make sure to add the aggregate. Possibly some fiber. That’s is not going to last very long the way he did it.
これね、下地に薄くラス入れるか捨てモルタル打っとかないと歩いたらガタガタにズレるよ
So neat
Where can I get one of those moles
Amazon has
Home Depot .
Lowes on line
Cudo👍
This fucking guy doesn't care to respond to anybody's questions I see. This looks like straight cement and not concrete, so I am guessing this will last about a year if lucky - but it looks nice!
Were do the above die available in goa? Plz give me there contact no.
Симпатично
👍
Excelente parabéns
👏👏👏👏👏👍👍👍
9жж
Жзхй
Thông báo zô lun
QUEDA MUY LINDO, PERO PARA EXPOSICIÓN, ...EN CUANTO PISEN EL BORDE SE SALE TODO DE LUGAR. ...LA SOLUCIÓN,.. HACER DOS PERFORACIONES TIPO EMBUDO EN CADA PIEZA, ANTES DE PONER CEMENTO O MORTERO DESPUÉS HACER UN BORDE LISO Y RELLENAR LA JUNTA HASTA LA MITAD DE LA PIEZA..!!
ill make my own....first put and spread a first layer maybe 2 inches thick then secondly the mold...the 1st layer acts as base and binder so it wont seperate...thats how should do it
ㅇ
You can do it quickly, but the quality suffers and it will look like a 4-year-old did it as a half assed art project
Gostei
That path is not shemale friendly.
How do you walk on high heels on those stones?!
Get drunk!
,
хлам
Ist es diese ? ebay.us/acCUDl
Buty.robocze.na.stopy.ubierac.Bhp
На песке. Короче говно
Fak