Concrete Walkway DIY / Terrasse Pflastern

Поделиться
HTML-код
  • Опубликовано: 26 авг 2024
  • DIY with cobblestone mold
    Cobblestone Walkway
    Terrasse Pflastern Teil

Комментарии • 97

  • @thegretnaexperiment2.021
    @thegretnaexperiment2.021 5 лет назад +8

    Thanks for the video! Your stones came out so nice! It will help me find the best consistency when I mix mine. Most other videos don’t get this right. It’s clear you know what you’re doing.

  • @wiloskitchen
    @wiloskitchen 4 года назад +7

    Am feeling more confident now that I have seen this.Great video.

    • @lizliz3423
      @lizliz3423 3 года назад

      What did you ise to fill the gaps? Sand or pebbles?

    • @wiloskitchen
      @wiloskitchen 3 года назад +1

      I use pebbles 🙂

    • @lizliz3423
      @lizliz3423 3 года назад

      @@wiloskitchen that's great because that's what I plan to use too! :) Have you had any issues with the individual pavers moving or lifting up?

    • @wiloskitchen
      @wiloskitchen 3 года назад

      @Elizabeth Wendt no problem at all except for a couple lower than the others.maybe the surface wasn't even when installing.but still looking good 🙂

  • @carlk.pantoji3544
    @carlk.pantoji3544 3 года назад +4

    Great video, very clean and leveled. However, I wish you would’ve shown how you do the edging or when there’s no space for one entire set.

  • @barbaralovejoy1080
    @barbaralovejoy1080 4 года назад +5

    What mixture did you use and how long did you leave in mold before removing.

  • @woodworks2123
    @woodworks2123 3 года назад

    Your finish is much smoother than the rest I've seen. Your mix seems wetter which is prob why. How long did you have to leave it before taking the mold off?

  • @moncyesthervarughese7488
    @moncyesthervarughese7488 4 года назад +4

    What were you brushing inside mold? Is it something like Pam spray for when you bake a cake so it wont stick?

    • @ferdinandflores5116
      @ferdinandflores5116 3 года назад +1

      Probably a repellant so the mixture wont stick to the mold. Or maybe its a used oil!

  • @speedwayman100
    @speedwayman100 5 лет назад +4

    you didnt put any rock in the mix? just sand and cement it looks like

  • @kbanghart
    @kbanghart 4 года назад +12

    Only drawback I can see with this, at least for what I will be doing, is that I'm not completely sure my ground is level, so instead I'll just pour it and then level out the top. And then do a stamp in part of the top

  • @micheletlittle
    @micheletlittle 4 года назад +2

    Very nice and neat...thanks for sharing!

  • @catherinemurphy873
    @catherinemurphy873 9 месяцев назад

    Nice work 😺. Thanks 👍

  • @mauriciomuller255
    @mauriciomuller255 4 года назад +1

    Do not need to put small Stones in the cement?

  • @darrenwarren2162
    @darrenwarren2162 4 года назад +4

    GREAT VID!!! And the music was on point also. What was your mix? I have used quikrete before but I dont like all the rocks and I'm afraid that's what will show when I tackle a project like this. Which of the concrete bag mix did u use?

    • @joanderson7219
      @joanderson7219 4 года назад +2

      At 1 minute you can see him mixing plaster sand and cement. It's just regular mortar with no rock

  • @kemo9306
    @kemo9306 4 месяца назад

    Is this concrete or just cement and sand??

  • @kerryb1250
    @kerryb1250 4 года назад

    Good job, so smooth and neat .

  • @7775mohamed
    @7775mohamed 4 года назад

    after finishing it and dry I must pour water or no ? Also in Europe in Hungary in winter weather. I do by the same way or I must add somthing under it ?

  • @isabellecompere9336
    @isabellecompere9336 5 лет назад +2

    Thanks for the video, what did you use for mixers?

  • @PhiloFery
    @PhiloFery 3 года назад +1

    What sand did you use for the base?

  • @xiecatherine2677
    @xiecatherine2677 3 года назад

    What's the coating that you brush on mold and what kind of sand that you used at the bottom of the mold for leveling?

  • @godandglory2144
    @godandglory2144 4 года назад +2

    i see you were applying something to the mold, i guess it prevents the cement from sticking? please let me know what is it, I am getting ready to do some work in my backyard, your respond will be of great help. thanks

    • @DIYJury
      @DIYJury  4 года назад +7

      you may not believe but it's oil for frying

    • @godandglory2144
      @godandglory2144 4 года назад

      @@DIYJury really? i might try that, i dont see a little oil would affect concrete, thanks

    • @Here-2-Learn
      @Here-2-Learn 4 года назад +1

      DIY Jury each time you recoil it?

  • @karlriegler9553
    @karlriegler9553 Месяц назад

    Awesome

  • @fionahobbs8818
    @fionahobbs8818 3 года назад

    Is that an oil you're using to stop the mould sticking?

  • @Godsdaughter1986
    @Godsdaughter1986 4 года назад +1

    How long does it take to “dry” so you can go on with the next tile? Would it be better to buy 2 molds to work faster?

    • @jveebklyn1644
      @jveebklyn1644 4 года назад +2

      @Sara Kesteloot You don't need to wait at all. Your mix should not be so wet that it sags when you remove the mold. Just be sure you fill the mold and tamp it down. Remove the mold and smooth the concrete as needed.

  • @tomaszmilenda68
    @tomaszmilenda68 5 лет назад

    Pomyslowy Grzegorz😉 . Pomysl mega 👍🏻👍🏻👌

  • @janhvizdos
    @janhvizdos 3 года назад

    Nice, how kg cement is important for 1m2?

  • @enginkosem1313
    @enginkosem1313 Год назад +1

    Süper ben bu kalıptan sipariş vericem telefonunuzu yazarmisiniz

  • @Smdcp-zg5zz
    @Smdcp-zg5zz 4 года назад +2

    Hi! How are your pavers doing without using larger aggregate in the mix?

    • @tassie7325
      @tassie7325 11 месяцев назад

      I have the same question
      This looks to be a pure mortar mix and I am curious how it will hold up

  • @pfadvision6029
    @pfadvision6029 3 года назад

    Hello, this video is really great! May I use any parts of it for my advertising (business)? thank you in advance for your reply. best regards

  • @ldane1991
    @ldane1991 4 года назад

    Can you use plaster instead of concrete?

  • @Jdcarpentrycov
    @Jdcarpentrycov 5 лет назад

    What did you use as a base? And what did you use for the mould mix ?

  • @kornkhmer101
    @kornkhmer101 3 года назад

    How many walkway can you get out of 80lbs bag?

  • @WhiskeyTangoFoxtraught
    @WhiskeyTangoFoxtraught 3 года назад

    More patient than me, I would have bought 100 of those molds.

  • @ddemier
    @ddemier 4 года назад

    Did the color ever even out over time? They look like diffrent colors

    • @gypsileydi6412
      @gypsileydi6412 3 года назад

      The darker colors are when still moist. Once it completely dries it should all be the same color.

  • @armandolizama4716
    @armandolizama4716 2 года назад

    Were I can buy the molding?

  • @ronbarak3302
    @ronbarak3302 5 лет назад

    Great video, what did you use as Grout?

  • @tuelienloanle3516
    @tuelienloanle3516 4 года назад +1

    Hi, thank you for video. How much cement each mold? Do they have recipe called out for the mold?

    • @JoePJack1
      @JoePJack1 4 года назад

      This is a quikrete mold. 80 pound bag does 1.5 molds

  • @clubdia6322
    @clubdia6322 4 года назад +1

    Super👍👌

  • @forestpkguy
    @forestpkguy 4 года назад

    How much did this end up costing

  • @minervafelix3991
    @minervafelix3991 4 года назад

    Muy bonito y 🙂perfecto

  • @jeromegarcia5396
    @jeromegarcia5396 3 года назад

    I would of thought you poured your cement and let it firm a bit and then use that as a press and push down into cement...
    This seems better..

  • @maksim6278
    @maksim6278 4 года назад +2

    Есть у меня такая рамка, ерунда это полная, пробовал заливал дорожку.. То консистенцию раствора не угадал, то ждешь когда схватился, чтоб не поплыл раствор, то рано снял и раствор поплыл , то между отсеками рамки не попал раствор. Это полная жопа. В итоге поверх всего этого положил тротуарную плитку и забыл

  • @desertrider325
    @desertrider325 5 лет назад +1

    How many did you do total? How many in a day?

  • @michellea1836
    @michellea1836 4 года назад +1

    what did you coat the mold in every time prior to using it?

    • @jveebklyn1644
      @jveebklyn1644 4 года назад

      @Michelle A Probably some type of cooking oil. I didn't use anything when I used these molds, but I used a spray (PAM) when I made my own wood molds.

  • @teohchiawei
    @teohchiawei 4 года назад

    I saw u apply something around the moulder. What is that? grease?

  • @stephenmason5682
    @stephenmason5682 5 лет назад +2

    why lay concrete on sand? it's not stable?

    • @DIYJury
      @DIYJury  5 лет назад

      how do you think I should do it ?

    • @stephenmason5682
      @stephenmason5682 5 лет назад +1

      @@DIYJury any surface under concrete Must be compacted! By hand or machine!

    • @DIYJury
      @DIYJury  5 лет назад

      believe me, I hardened this sand with a garden roller. it is not on video

    • @nowirehangers2815
      @nowirehangers2815 4 года назад

      Self leveling so its fine

    • @joselim7981
      @joselim7981 4 года назад +3

      There's no person weighing a ton on stepping on it

  • @ntdtv
    @ntdtv 4 года назад

    Hello,
    It's Divya from NTD Television. This video is great!
    Our mission is to uplift the world through sharing Truth, Hope and Humanity.
    We would like to upload your content to our media pages.
    Would you allow us to do that?
    Thank you.

    • @DIYJury
      @DIYJury  4 года назад +1

      sure, no problem. I'm glad you like my movie

    • @ntdtv
      @ntdtv 4 года назад

      @@DIYJury Hi, Thank you for your permission, it is very much appreciated. We will credit your RUclips Channel with a clickable link to it and we will also put your watermark in the video. In addition, we will provide credit to you as a part of our Top comment so our fans know where to find you.
      If you could kindly share your email id so I can send you NTD Video Usage FAQs. If you have any questions, please feel free to contact us at divya.rawlani@ntdtv.org. Thank you.

    • @ntdtv
      @ntdtv 4 года назад

      @@DIYJury Before publishing your video, we need to send you NTD Video Usage FAQs and List our social media channels. Can you please share your email id? Otherwise, we are not able to publish your video. I look forward to hearing from you soon. Thank you.

    • @DIYJury
      @DIYJury  4 года назад +1

      ​@@ntdtv grzjury@gmail.com

    • @ntdtv
      @ntdtv 4 года назад

      @@DIYJury Thank you for your response. I will send other details via email.

  • @eyupacar1327
    @eyupacar1327 3 года назад

    Slm aynı kalıptan gönderir misiniz size nasıl ulaşa bilirim

  • @chrislong8314
    @chrislong8314 4 года назад +1

    What did you paint on mold to help concrete release? Thanks!

  • @levanduan8044
    @levanduan8044 3 года назад

    Có bán k không

  • @annielieberman4256
    @annielieberman4256 4 года назад

    what do you use to fill the sides

    • @DIYJury
      @DIYJury  4 года назад

      same weight as concrete cubes

  • @vagur2602
    @vagur2602 2 года назад

    Всё красиво.Музыка не к чему.И шнурок натягивать зачем.

  • @eyupacar1327
    @eyupacar1327 3 года назад +1

    Telefon numaranızı ala bilir miyim

  • @trentcaisson5282
    @trentcaisson5282 4 года назад

    Where did you get those shoes?

  • @arinsa8755
    @arinsa8755 4 года назад

    where to find this patern?

    • @DIYJury
      @DIYJury  4 года назад

      www.inspireuplift.com/products/garden-path-maker-mold?cmp_id=9360670694&adg_id=97994532434&kwd=&device=c&gclid=CjwKCAjwwYP2BRBGEiwAkoBpAq0so5kkFkLIOekvs_Qu4RG7Zw0Je1yt-d6hAt4hMZGCuYQfym4xBRoCVyAQAvD_BwE

  • @MrEbay84
    @MrEbay84 5 лет назад

    Where did you get that mold?

    • @DIYJury
      @DIYJury  5 лет назад

      pl.aliexpress.com/item/32961886328.html?spm=a2g17.search0302.3.9.4d876d24rejtZI&ws_ab_test=searchweb0_0%2Csearchweb201602_0_453_454_10618_536_317_537_319_10059_10696_10084_10083_10304_10821_10843_10887_10307_321_322_10065_10068_10301_10103_10884_10820%2Csearchweb201603_0%2CppcSwitch_0&algo_pvid=7c1b1a96-82a3-4661-9aa8-554f66d5265c&algo_expid=7c1b1a96-82a3-4661-9aa8-554f66d5265c-1

  • @Alex090678
    @Alex090678 4 года назад

    С одной формой ты будешь заливать очень долго;)

  • @user-me5gl6ft3w
    @user-me5gl6ft3w 2 года назад

    Θα ήθελα να έχω ένα πώς μπορώ

  • @user-zg9ec8zb6m
    @user-zg9ec8zb6m 4 года назад

    Где можно делать такую форму?

    • @user-qz5gu6pe1c
      @user-qz5gu6pe1c 4 года назад

      Неделю назад видел в магазине Светофор по 380 по-моему . Это Ростовская область.

    • @rinatmagomedov3613
      @rinatmagomedov3613 4 года назад

      В бау центре отдел сад огород там был, Краснодар. А ещё лучше будет добавить в смесь житкое стекло и накрыть плёнкой чтобы долго сохло

  • @gabu6042
    @gabu6042 5 лет назад

    good👍

  • @user-yx2jt6zq1z
    @user-yx2jt6zq1z 4 года назад

    Мобила крутая .....

  • @user-ut9gk4op5g
    @user-ut9gk4op5g 4 года назад

    А потом были вмятины!