The secret is to switch from a clutch motor to a servo motor with preferably 700 or more watt. It is an unbelievable improvement and can be ordered online and attached by yourself.
Firstly Sorry for answering late Now whats the type of machine If it’s gathering thread maybe the bobbin (riller) is loosed or the thread is not properly fixed and also check with your hand if the tread is too tight and the needle too try use a bigger needle
Good morning sir, I'm a new user of citizen industrial Machine, ones I press the pellder the machine will stop working,what caused it. Also, the hand pulley to roll the belt ,is not rolling if I use my hand to roll it, what can I do sir. I'm in Modakeke Osun Modakeke
Hmm that happens sometimes to both of my industrial machines two things can cause it 1. Low power supply 2. The contact switch and socket and not firm enough so once you exert pressure on the peddle it causes tension that stops it
Sorry a made a mistake in my massage What I want to say is tha machine isn't working forward,it just sewing backwards and isn't sewing anything, after you finish sewing backwards you will your leader the way you put
@lauratmuhammadm560 if you notice the teeth ( that stuff that the material rest on top that goes back and forth) is stuck then it requires a repairer I can’t explain it over here so you don’t damage it more.. but you can check for the threading or Bobbing case if there’s any tension
Please what could cause it not to sew because mine is not sewing.... Please help a sister. No good engineer around that knows about the machine.. And is there a way to reduce the speed?
Please can you make a video about the threading.
Thanks
Thank you for the video. Please how do you reduce the speed on the machine? Mine is this same citizen, but it’s too fast
Honestly I didn’t reduce the speed
Although I released the tension on the motor
But the secret is I learnt how to use it even with the speed
The secret is to switch from a clutch motor to a servo motor with preferably 700 or more watt. It is an unbelievable improvement and can be ordered online and attached by yourself.
Thanks for sharing. Pls I need help with mine.. I just bought it, tried to use it for leather but it's gathering thread. Pls what do I do?
Firstly Sorry for answering late
Now whats the type of machine
If it’s gathering thread maybe the bobbin (riller) is loosed or the thread is not properly fixed and also check with your hand if the tread is too tight and the needle too try use a bigger needle
Please I have 2 questions
- can a zig zag attachment foot work on this
- what type of presser foot holder do I need for this machine
It depends on the zig zag attachment
And the presser foot comes with it
Good morning sir, I'm a new user of citizen industrial Machine, ones I press the pellder the machine will stop working,what caused it.
Also, the hand pulley to roll the belt ,is not rolling if I use my hand to roll it, what can I do sir.
I'm in Modakeke Osun Modakeke
Hmm that happens sometimes to both of my industrial machines two things can cause it
1. Low power supply
2. The contact switch and socket and not firm enough so once you exert pressure on the peddle it causes tension that stops it
And theres a Nut at the Rolling presser foot
Try to see if its too tight or needs oiling 👍
How do you adjust dog feed height
How do you mean
Thanks for sharing!
I have a chance to buy one for about $700 with an unknown brand. Does the quality vary from brand to brand?
Yeah it varies depending on the brand and your country of residence
But &techsew is a great machine or @juki
Please, how much is it sold here in Nigeria and where can I get one?
Thank you.
Ok I actually bought this for 240k then the mechanic took some fees for setting it up
@@Egah_1 Okay.
Thank you.
Pls where did you get your machine ?
From Benin city, Edo state Nigeria
Please i need help my post bed sewing machine is not working forward
Hi laurat whats wrong with it
Sorry for replying late
Sorry a made a mistake in my massage
What I want to say is tha machine isn't working forward,it just sewing backwards and isn't sewing anything, after you finish sewing backwards you will your leader the way you put
@lauratmuhammadm560 check for the machine teeth if its stock
@@Egah_1 ok thanks
Please what can I do to make it work
@lauratmuhammadm560 if you notice the teeth ( that stuff that the material rest on top that goes back and forth) is stuck then it requires a repairer I can’t explain it over here so you don’t damage it more..
but you can check for the threading or Bobbing case if there’s any tension
Please what could cause it not to sew because mine is not sewing....
Please help a sister. No good engineer around that knows about the machine..
And is there a way to reduce the speed?
It’s faulty then