Lightweight concrete with low density 300 kg:m3 made of cement water and foaming agent manually

Non autoclaved lightweight aerated concrete recipe you can find here www.pioner-grou...
For more details send an e-mail [e-mail]
Foamed concrete, also called cellular light weight concrete is produced by the mixing of Portland cement, sand including or alone fly ash, water and preformed stable foam. The foam is produced with the help of a foam generator by using foaming agent. The air content is typically between 40 to 80 percent of the total volume. The bubbles vary in size from around 0.1 to 1.5 mm in diameter. Foamed concrete differentiates from (a) gas or aerated concrete, where the bubbles are chemically formed through the reaction of aluminum powder with calcium hydro oxide and other alkalies released by cement hydration and (b) air entrained concrete, which has a much lower volume of entrained air is used in concrete for durability. Curing of foamed concrete unit may be done as per IS: 456-2000. Curing can be speeded up by steam.
Foamed concrete may be produce by mixing the above mentioned ingredients in ready mix plant or ordinary concrete mixer.
Foamed concrete is self compacting concrete requires no compaction, and will flow readily from a pump outlet to fill mould, form, restricted and irregular cavities. It can be pumped successfully over significant height and distances. The 28 days strength and dry density of the material vary according to its composition, largely its air voids content, but usually they range from 1.0 to 25.00 N/mm2 and 400 to 1800 kg/m3. The plastic density of the material is about 150 to 200 kg/m3 higher than its dry density.
Non autoclaved lightweight aerated concrete is a type of lightweight concrete which is used to produce blocks and replace bricks. NAAC is lighter then conventional concrete. It is formed by using portland cement, fly ash, limestone, aluminum powder and water. Aerated concrete has a good strength, durability, good thermal and sound insulation. Dry density of this material ranging between 600 kg/m3 to 1600 kg/m3. Non autoclaved lightweight concrete blocks can be used for housing and commercial purposes.
We have developed a unique non autoclave lightweight aerated concrete recipe and can achieve densities from 250 kg/m2 (even less) with perfect compressive strength, thermal and sound insulation.
PIONER GROUP supply lightweight aerated concrete infill for cold formed steel construction technology infill and we can supply dry mortars (plaster, floor screed, self leveling compound, lightweight aerated concrete dry mix etc.) production line with a good price and speed of delivery.

[@shafeeqahmed3572]

How many days dry for use
I am also doing same but for business how can keep for 7,14,28 days pls tell me how to dry soon

[@vishalgondaliya1976]

Please provide English subtitle....

[@cutecatlover6116]

Very Good.
How about strength?
Would you mind to share the formulation please.
What kind of foam do you use.
If possible please make subtittle in English
Thankyou

[@hashbrown12321]

Did you use aluminum powder to cause foaming, and should the mix be very flowable to allow for expansion?

[@cellularlightweightconcret1499]

yes. www.pioner-group.com/concrete

[@SherrickDuncan]

Hi there. A question.
Can I use floating concrete blocks to make a solid stone Mobile Floating Private Island if I put pond liner tarp on top of the floating concrete blocks?
And then put compost and soil and grass and bushes and trees etc on top of the tarp..
And then put houses on top of this synthetic but natural looking mobile floating island and then released herbivores and insectivores (sheep / goats / rabbits / chickens / turkeys etc) to mow - brush hog and weed wack the lawns?
Could I use your product to make a mobile floating island in this way that would hold the weight of a house and soil and life in general like a regular natural non floating non mobile island does?
Then can I anchor it like a boat?
This is what the Peruvian Uro People of Lake Titicaca have done for thousands of years with a cork like Reed root that floats. But it rots after the Island has floated for 35 years and must be replaced.
And Richart Sowa has done this using floating plastic water bottles in nets with pallets tarps and soil on top.
Can I use your product to make a modern permanent version of this?

[@cellularlightweightconcret1499]

Good day Sherrick, actually I am not sure that it works for this material but I don't have such experience by the way... You can be the fist who has try :)

[@SilentProg]

Hi after 24 hours water get inside and block get down in water 😂 , after 24 hours you need 24 for water get steaming

[@srinivastech6653]

Sir. Can we we use low density cement concerete for floor slabs

[@cellularlightweightconcret1499]

You can use 600 kg/m3 as an underlier for tiles and marble

[@baybe5020]

The composition please sir🙏

[@nhuhuynhduc6191]

Có bán hoá chất ko

[@abidsheikhi6314]

как можно получить такое устойчивый пену в домашних условиях?

[@sandisidharta7236]

hai i am sandi from indonesia i am interested in lightweight brick products may i ask more about this product

[@cellularlightweightconcret1499]

You an find more info here www.pioner-group.com/services/lightweight-concrete-blocks-line/

[@user-bz5fb3gd1n]

Belarus 2021 OAO Zabudova Xoldingovaya Kompaniya

[@benedictcalantoc1704]

What kind of concrete? Can you buy it at big box store?

[@cellularlightweightconcret1499]

In the video foam concrete. You can do yourself non autoclaved lightweight aerated concrete and here the recipe www.pioner-group.com/concrete

[@armkf2343]

Ratio of material?
Please

[@cellularlightweightconcret1499]

You can find the recipe over here www.pioner-group.com/concrete