I've seen quite a few tutorials about making houses with clay but yours looked the neatest. I clicked on this to see how neatly you finished it up. It was so satisfying to watch right till the end and how patiently you sanded it to give it the perfect finishing touch. Loved it! ❤
I have made statue of Indian Hindu sages out of clay. These ready to use air dry clays are very delicate after they dry. After collecting many Christmas village pictures, I will try to make atleast one or two houses with lights inside the house. With love from Mumbai India.
This is lovely! I love your tutorial and the detail in it, you show how to go about every step and that's super useful. The end result is incredibly pretty! Thanks for sharing!
Wow I’m glad I found your channel! I live in Florida and we are moving near my daughter. I do pottery. I’m giving it up and going to start with air dry clay. When I saw your house peace I got excited and would love to make a few. Thank you for your tutorial. Joanne
I love this, thank you for sharing. Your tutorial is so easy to follow. Can i ask how did you print the pattern on to the clay? I tried wet my clay like you did but when i peel the paper, there is no pattern on the clay.
Actually, I can't recall how much clay I used for this project, but I know that I opened a 1 kg pack and used a big chunk of it. I think a 500gr would be enough if you roll the walls thin, but that will weaken the structure for sure. I hope this helps ☺️
i didn't know air dry clay could be sanded. It feels foam-like, plastic-like the last time i played with it. it's so nice how you can sand the edges so that the surface flushes flat.
@@cinmud2458 you may have played with air dry foam clay. That type of clay does feel like foam and plastic. This is paper-based clay. You can sand it, paint it, etc. and it is heavier than foam clay :)
I don't know if super glue would work with air dry clay. It's porous and may absorb the glue, but you can test it. It may depend on the type of super glue you use; the gel-like ones may work.
I'm happy that you liked my tutorial. You have to use an inkjet printer to transfer the pattern to the clay. Add a few drops of water to wet the clay before applying the print, but don't over-wet it because the paper will stick to the clay, and it'll be difficult to remove it. :)
It's a precision knife (also known as a craft knife or X-acto knife). You can find it in craft stores or hardware stores. They are also available in sets with various blades. Usually, they have these 'flat-headed' ones in two sizes.
I was just searching for some of these on Etsy and there wasn't a lot of choices so I decided to check RUclips on how to make one and found yours! How thick are you rolling out the clay? I have a nice chunk of unopened clay and had no idea what I was going to do with it, but now I know... Thank you so much for sharing!
Sadly, air dry will change when drying as the water evaporates. Mine also deformed sligthly. Some brands are more prone to curling, cracking and warping. You can't control the last one. You can sand it after they have dried so they line up better for glueing.
Thank you Melain! I used Darwi air dry clay (but I love to work with DAS too), a craft knife set (for the windows), a small heart cookie cutter, a blade (to cut the longer parts), white craft glue, white acrylic paint and a sponge to apply the paint. I printed the template on copy paper with my inkjet printer. And almost forgot, sandpaper for a smooth finish.
Adoro questo tuo progetto 💕 Vorrei fare alcune domande: che tipo di stampa hai usato? Unisci le varie parti asciutte? In quanto tempo asciugano? Dopo aver unito con la colla quanto tempo aspettare per passare la carta abrasiva? Grazie!!!
Hi, Maria! I used my inkjet printer for the templates (to my best knowledge, that's the only ink that transfers to the clay). I let the wet clay walls dry for 2 days. I joined the parts using strong white craft glue, one piece at a time, and let them dry for at least half an hour. It may take longer if you use a different type of glue. After assembling the house, I used wet clay to patch the sides, cracks, and edges. I let it dry overnight before sanding.
Thank you! Actually, I made it myself using Canva. Mixed and matched some basic shapes until I was satisfied with the look. There is the link for the PDF, in the description, if you want to download it :)
I like to leave them for at least 48 hours, but it also depends on the thickness of the piece and your environment (if it's moist it may take more time). You can do a "nail test" - push your nail on the back, if it leaves only thin/small mark it's dry.
I've found that this method results in a nicer and steadier house. I tried sculpting it wet, but it cracked. Just make sure the clay pieces are 100% dry before gluing 😊
I'm so happy you like it! The measures: height - 15 cm, width - 8 cm, length/depth - 7 cm. But you can download the free pdf template from the description and use that for your project ☺
Hi, you can download and print the exact template, if you want. It's in the description. I can also measure it if you don't have a printer, just let me know.
Hi Paula, I found this a really fun DIY to make! In the Netherlands we celebrate Sinterklaas and we make suprise gifts for each other. I used your printable to make my suprise for my sister. I found your DIY on Pinterest and now I also a come across you on RUclips. I used your printable and modified the pattern a bit and made it into a vase. Do you maybe have an Instagram or TikTok account so I can tag you?
Thank you Jajet! I'm so happy you liked and also tried my DIY 😊 I don't have an Instagram or TikTok. Ijust don't have the time for it. Just the blog and the RUclips channel.
I've seen quite a few tutorials about making houses with clay but yours looked the neatest. I clicked on this to see how neatly you finished it up. It was so satisfying to watch right till the end and how patiently you sanded it to give it the perfect finishing touch. Loved it! ❤
Large thankful , Paula❤️❤️❤️from Russia
You diy is the best I have ever seen
I have made statue of Indian Hindu sages out of clay. These ready to use air dry clays are very delicate after they dry.
After collecting many Christmas village pictures, I will try to make atleast one or two houses with lights inside the house.
With love from Mumbai India.
where did u buy aur dry clay?
This is lovely! I love your tutorial and the detail in it, you show how to go about every step and that's super useful. The end result is incredibly pretty! Thanks for sharing!
Thank you! I'm happy you like it :) It's one of my favorite air dry clay projects too.
Wow I’m glad I found your channel! I live in Florida and we are moving near my daughter. I do pottery. I’m giving it up and going to start with air dry clay. When I saw your house peace I got excited and would love to make a few. Thank you for your tutorial. Joanne
SUPER 👏dziękuję serdecznie za filmik 🙂😍
A great tutorial! Your step by step instructions are easy to follow. Wonderful inspiration for anyone looking to make a house. TYFS!
Such ah adorable project. Thank you for this tutorial. I really would like to try it out.
Thank you! You are very kind :)
I haven't tried clay art yet, but I sure want to try your house! Thank you!
Thank you so much for the template! I loved watching you make this house and want to try it!! ❤❤❤
You're welcome! 😊
Where is the template please?
Gorgeous, love it! Thank you for sharing..
I'm so happy you liked it! 🤗
Not sure about using glue in this considering the heat from the candle, it can get very hot in a contained space
@@vicki6210 yes, but I always use led candles with air dry clay for safety 😊
Hermoso y el nivel de detalle explicado paso a paso. Gracias por compartir. Dios te bendiga 🙏
So nice! thank you for template!
You're welcome! I'm glad you like it 🤗
Cheaper than a Christmas Town. I think I’m gonna make my own now🫶
Absolutely beautiful but so much work, I would never have the patience but congratulations 🎊 on your creative skills, so impressive. Xxx
Thank you! 🤗
I love this, thank you for sharing. Your tutorial is so easy to follow. Can i ask how did you print the pattern on to the clay? I tried wet my clay like you did but when i peel the paper, there is no pattern on the clay.
You have to use an inkjet printer :)
Lovely! The best ever!❤
Hola .
Se dejan secar las paredes antes de pegar ?
Qué pegamento usas ? Cola ?
Hi! Yes, I let the walls dry, then I use a strong white craft glue that dries clear.
Wonderful tutorial! The end product is amazing! Thank you for sharing your method. 🙂
Thank you! ☺
Can the air dry clay handle the heat of the candle over time? Does it crack or emit any fumes?
Use only battery operated candles for safety!
Could you please tell me if 500gr of clay is enough for this project? I fell in love with your creation and wanna try to do the same 😅
Actually, I can't recall how much clay I used for this project, but I know that I opened a 1 kg pack and used a big chunk of it. I think a 500gr would be enough if you roll the walls thin, but that will weaken the structure for sure. I hope this helps ☺️
i didn't know air dry clay could be sanded. It feels foam-like, plastic-like the last time i played with it. it's so nice how you can sand the edges so that the surface flushes flat.
@@cinmud2458 you may have played with air dry foam clay. That type of clay does feel like foam and plastic. This is paper-based clay. You can sand it, paint it, etc. and it is heavier than foam clay :)
@@ColorfulCraftCorner Thanks! That solves my confusion! Do you recommend Creative Paperclay for this project?
Such a great tutorial & thank you for sharing the template & instructions!❤
You're very kind! I'm so happy so many people like my little clay house luminary :)
Thank you for template!! 🎉❤
What kind of glue did you use? Is it heat resistant? Thanks!
I used a strong, water-based craft glue. I don't know if it's heat resistant, sorry.
Gracias por enseñar. Muy linda. Trataré de hacer una❤
Es porcelana fría?
Yapıştırıcı olarak hızlı yapıştırıcı kullanabilir miyiz
I don't know if super glue would work with air dry clay. It's porous and may absorb the glue, but you can test it. It may depend on the type of super glue you use; the gel-like ones may work.
Love your tutorial but I wonder if there is any mold to make this?
I'm sorry but for this house there isn't. I created the template, that you can download or you may search for a similar mold online.
Que uso para que las plantillas quedaran marcadas
Just found your channel and I love it! Such wonderful work
Thank you, Joan! I'm so happy you like my crafts :)
Здравствуйте скажите пожалуйста что за клей вы использовали для склейки деталей?🙏🏻
Hi, I used a strong white craft glue.
@@ColorfulCraftCornerспасибо ❤
This is so nice!!! Thank you for sharing this with us! ❤❤
How do you get the ink to stick to the clay? Do I use a certain type of paper?
I'm happy that you liked my tutorial. You have to use an inkjet printer to transfer the pattern to the clay. Add a few drops of water to wet the clay before applying the print, but don't over-wet it because the paper will stick to the clay, and it'll be difficult to remove it. :)
@@ColorfulCraftCorner ohhh okay thank you!!! 🤗🤗
@@Toltecgrl you're welcome 😊
Скажите пожалуйста каким клеем вы пользовались при сборе домика?😊🙏❤
What glue did you use to stick the sides etc
@@sarahhughes7538 a strong white craft glue that dries clear 😊
Love this! Is there a specific name for the tool you used to cut the windows out?
It's a precision knife (also known as a craft knife or X-acto knife). You can find it in craft stores or hardware stores. They are also available in sets with various blades. Usually, they have these 'flat-headed' ones in two sizes.
So cute! Very nicely done ! TFS! How long did u let the pieces dry before assembling them with glue? Thank u and blessings
Thank you! I let the walls dry approx. 48 hours, a couple of hours for the glue to cure, and let the patched parts dry overnight before sanding.
eu estava precisando de ideia, agradeço muito,
abraços daqui de holambra sp.
I was just searching for some of these on Etsy and there wasn't a lot of choices so I decided to check RUclips on how to make one and found yours! How thick are you rolling out the clay? I have a nice chunk of unopened clay and had no idea what I was going to do with it, but now I know... Thank you so much for sharing!
I rolled the clay approx. 1/8 inches, but if you have a big chunk of clay you could roll it thicker, like a quarter of an inch (it makes it stronger)
@@ColorfulCraftCorner thank you!
How did you ensure that the clay doesnt warp while it tries? I tried it out and my walls dont line up after the drying period.
Sadly, air dry will change when drying as the water evaporates. Mine also deformed sligthly. Some brands are more prone to curling, cracking and warping. You can't control the last one. You can sand it after they have dried so they line up better for glueing.
faça mais casas neste estilo. rs
obrigado! abraços de holambra sp
Nice work, could you put the list of materials you used please, I would like to make it a little house 🥰
Thank you Melain! I used Darwi air dry clay (but I love to work with DAS too), a craft knife set (for the windows), a small heart cookie cutter, a blade (to cut the longer parts), white craft glue, white acrylic paint and a sponge to apply the paint. I printed the template on copy paper with my inkjet printer. And almost forgot, sandpaper for a smooth finish.
Adorable-I love it!
Wao, super, super excelente 👌 gracias 🇵🇷
Adoro questo tuo progetto 💕
Vorrei fare alcune domande: che tipo di stampa hai usato? Unisci le varie parti asciutte? In quanto tempo asciugano? Dopo aver unito con la colla quanto tempo aspettare per passare la carta abrasiva?
Grazie!!!
Hi, Maria! I used my inkjet printer for the templates (to my best knowledge, that's the only ink that transfers to the clay). I let the wet clay walls dry for 2 days. I joined the parts using strong white craft glue, one piece at a time, and let them dry for at least half an hour. It may take longer if you use a different type of glue. After assembling the house, I used wet clay to patch the sides, cracks, and edges. I let it dry overnight before sanding.
Υπεροχα σε τη διασταση ειναι τυπωμενο Α3 η Α4?
It’s sooo good, can I ask from where did you get the pic of the house
Thank you! Actually, I made it myself using Canva. Mixed and matched some basic shapes until I was satisfied with the look. There is the link for the PDF, in the description, if you want to download it :)
Why would you use glue instead of slip?
This way, I could make the house faster and the edges nicer, but you can use slip too if you want to.
Hi what varnish do you use thank you
Thank you!
Does any glue work for this or any specific type
I used a strong white craft glue that dries clear, butyou can try any other glue that's suitable for porous surfaces
😍 Thanks for sharing !
You're welcome!
How long should walls dry?
I like to leave them for at least 48 hours, but it also depends on the thickness of the piece and your environment (if it's moist it may take more time). You can do a "nail test" - push your nail on the back, if it leaves only thin/small mark it's dry.
Why do you use glue to stick the clay pieces together please? Can you not stick them together with the clay. Thanks
I've found that this method results in a nicer and steadier house. I tried sculpting it wet, but it cracked. Just make sure the clay pieces are 100% dry before gluing 😊
@@ColorfulCraftCorner thanks 😊
@@lisaorourke903 you're welcome! 😊🤗
How did he build the house part? He didn't show the video, why isn't that part there?
@@gultendingil7941 hi! Which part are you referring to? Making the walls? Assemvbling the walls?
So good!TFS!
Great Project!
Thank you! 😊
Tell me why i still probably couldn't afford to live in that house
Hi! It's amazing 😍 is it possible to know the measures of your house template? I'd like to give it a try ☺
I'm so happy you like it! The measures: height - 15 cm, width - 8 cm, length/depth - 7 cm. But you can download the free pdf template from the description and use that for your project ☺
good afternoon! what are the dimensions of the parts?
Hi, you can download and print the exact template, if you want. It's in the description. I can also measure it if you don't have a printer, just let me know.
svp pour avoir les dimensions de la maison ? merci
Is this porcelain clay?
@@BrennaCorbit no, it was regular air dry clay. For this project I was testing darwi air dry clay, but you can use DAS or Jovi too.
Hi
Hi Paula,
I found this a really fun DIY to make! In the Netherlands we celebrate Sinterklaas and we make suprise gifts for each other. I used your printable to make my suprise for my sister. I found your DIY on Pinterest and now I also a come across you on RUclips. I used your printable and modified the pattern a bit and made it into a vase. Do you maybe have an Instagram or TikTok account so I can tag you?
Thank you Jajet! I'm so happy you liked and also tried my DIY 😊 I don't have an Instagram or TikTok. Ijust don't have the time for it. Just the blog and the RUclips channel.
@@ColorfulCraftCorner Okay I understand, no problem. I will mention your website and YT channel in my Instagram and TikTok description.
@@jajet thank you! You're very nice!