I love ur channel, the quality is amazing. I came from the gyroid planter video. I don't even have a 3D printer, your videos are pretty calming to watch
Thanks! Happy to help out in any way we can. Would you be interested if we did a more detailed video just on our sanding/finishing process in the future?
Hey guys I'm back! Finished your Keyblade build. Came out AMAZING. Will be happy to share photos if you'd like. Im preparing to tackle the Master Sword next! Prepping the paints/rod.. Hope you guys are preparing a Buster Sword build next ;)
That is amazing, so happy to hear it came out well! We were considering building Sephiroth's Masamune, but we would have to take out a wall or two to fit it in the shop. The Buster Sword is much more reasonable haha.
Beautiful work! The graphite makes it look super believable. Is there some sort of sealant or clear coat you could put on the blade after to help keep the graphite from coming off after the build is done? It seems like it would rub off on everything #.#
Does the graphite finish need a clear coat? i'm curious to know if it slowly rubs off and needs re-applied as well. Thank you! (also, sorry for necro post...)
I love the shininess of the graphite but the fact that we see the stroke application of it near the hilt makes me doubt if this is something I would gor for. Maybe chrome spray paint with a clear over it could net similar results? Go video btw, it does look amazing overall
I know it's been awhile since you guys posted this, but I have a question that I want to get your opinion on. I glued (using CA glue) two segments of the blade at a bit at an angle (like after I glued all the halves together and then was gluing each of the segments). I was thinking about using a soldering iron with a thin tip to try to melt a little inside the joint and then adjust. What do you suggest?
Aww that is the worst - but we have heard of a trick (we have not personally attempted this) you might be able to correct the bend by submerging the whole piece in some hot water (just tap water, no need to boil it) then quickly placing the whole piece on a flat cool surface apply gentle pressure to correct - Best of Luck!
Hello. I’m wondering how long the threaded rod is? I’m almost done 3D printing mine and I’d like to know how long it should be incase I have to cut mine. Thank you ^^
You should be good with a standard 3 foot rod - you might just have to trim it a little to fit your print. Good luck, we would love to see the finished product!
I am in the process of making one of these and was wondering if there are any additional tips on hot to hide the visible lines from the blade area. I have filled in and sanded multiple times and hit it with a coat or 2 of primer but they are still there. Whats the secret? Trial and error till perfect?
Sadly it is just a lot of filling and sanding. Make sure when you sand you are keeping the paper flat - we fin using a block of wood with sandpaper attached keeps it level. It is also important that everything is really secured together with glue, otherwise the gaps could reopen. Best of luck!
This is so cool! my friends currently printing my parts as i plan to make two of these, one for my zelda obsessed girlfriend and one for myself as ive always wanted a master sword replica on my wall. its really easy to follow this tutorial but my one question is how long of a threaded rod should i use? you guys didnt specify the length so i just want to make sure before buying anything!
You should be good with a standard 3 foot rod - you might just have to trim it a little to fit your print. Good luck, we would love to see the finished product!
Good eye! Yes we were rushing our build a little and didn't spend enough time sanding our parts, meaning everything was just a little too snug. Spending a bit more time sanding and cleaning out that inner channel after printing should solve any splitting issues!
Same as you I love the result when using graphite to get the metallic finish. Does it need a protective layer on top after adding the powder in order for it to not degrade or is it enough to rub it on the surface?
we coated the rod with the foaming glue then inserted it into the blade - However you can use a 2-part 5 minute epoxy for the same results without the mess.
The graphite finish is surprisingly durable. We did not use a clear coat and it has held up just fine. Oddly enough the only thing that took the graphite off easily is when we cut the cake at the end of the video, so as long as you keep it away from frosting you should be good haha.
@@make432 Never seen the stuff used before, but it makes the blade look awesome. Ordered the stuff to make my own, and I'll need to make a matching Shield after I find a high quality model.
This is great! I’d suggest checking out make up applicators instead of cotton balls only because they are reusable and you wont have to continue buying cotton balls Otherwise this is a great build
Thank you! We've been thinkin about it 😏 We did just ignore sanding the tri-force since it didn't look too bad, but it could be done with a hand sanding sponge or a makeshift file, wrapping sandpaper around a popsicle stick, etc. :)
We don't remember exactly but we had a 36" rod that we trimmed down to length, a 36" rod may work without trimming as it can go all the way to down the pommel!
I am also now done with mine. I like it but the model itself for me wasnt really good. the blade didnt fit together so I had to do an extrem amount of sanding all edges flat. It was really extreme.
No lie, we were ALL pissed at Miyamoto and Nintendo for acting like Zelda's 35th was mere peanuts compared to Mario's....still am, even though TOTK was a massive success
Hey guys! After seeing how well yours came out, I'm switching from silver spray paint to graphite for my first project, the master sword! Just one question, I have the sheath to go with it and I'm worried about the graphite rubbing off. Do you guys have a problem with that? I would clear coat it but I'm worried about losing that metallic finish. I've watched all your videos, you guys deserve way more subs than you have. I hope your channel blows up :) ps. I was your thousandth sub! You were at 999 when I subbed the other day!
Happy to have you join us and thanks for pushing us to 1000. We have found that the graphite is pretty durable and not much causes it to come off. The cake we cut at the end of the video is actually the only thing that seemed to remove it easily haha. But you can easily apply more graphite in the future if you do see some spots wearing down.
We might be working on our own dream version of the Master Sword that works out some of the issues we (and some others) have been having with the files - keep an eye out!
Remember to *Subscribe* to catch more of our builds! What would you like to see us make?
A Pokeball replica that also has the functionality of a Pokeball Plus would be really cool
I like how the hilt is a more matte finish instead of the traditional glossy one
Right?? We like that contrast between the matte handle and the smooth blade!
Ya’ll production value is so much better than it have to be. I really really hope that y’all will grow fast!
That really means a lot to us, thank you so much and thanks for your support!! :)
THE PRODUCTION AND BUILD QUALITY IS NUTS
Thanks so much!!
hahaha omg you cut the cake with the sword, i love it
😁
You guys are doing incredible work, I appreciate the effort you all put into these vids, keep it up!
Thank you so much! Is there anything you'd like to see us build?
It looks awesome, such a good build!
Thank you! 😁
If I had the money, I’d definitely commission and buy one. It is so beautiful
im actually working on thsi right now!!!! i cant wait to find better tricks
Absolutely beautiful to look at, fantastic work!
Thank you very much!
So far the beat master sword replica made out there
thank you so much - we have something even BETTER coming soon!
ITS SOOOO COOOL! I WANT ONE
RIGHT?! We're obsessed with it 😍
how great is the sword they made, I loved it🤗🤗
Thank you! Cheers!
INSANE QUALITY
THANK YOU!
The quality is insane! You deserve way more subs!
Thanks! and we think so too haha
You guys rock! Super glad I found the channel. Hoping to get a 3D printer soon!
Thanks and happy future printing!
Looks awesome guys. Great work as always
Thanks so much Josh!
I love ur channel, the quality is amazing. I came from the gyroid planter video. I don't even have a 3D printer, your videos are pretty calming to watch
Welcome! Thank you that means a lot to us! :)
Another beautiful build as expected.
🤘 Thanks man!
Looks so beautiful
Thank you! It's such a cool item 🤩
Holy fuck yall only got 663 subs, hella quality on your builds, keep up the great work, and highly appreciate the painting and grit tips
Thanks! Happy to help out in any way we can. Would you be interested if we did a more detailed video just on our sanding/finishing process in the future?
@@make432 I am!
I never comment on youtube but you guys are amazing.
We are honored! Thanks for the compliment!
how much to oder one from you guys????? i have been trying to find a amazing master sword for the past year and like wow?
Stay tuned we are going to have a shop up soon(ish)!
Amazing work
It looks so good!
Thank you! Was so cool building this one
Bamboo Bbq skewers would probably work here too
Good call!
Hey guys I'm back! Finished your Keyblade build. Came out AMAZING. Will be happy to share photos if you'd like. Im preparing to tackle the Master Sword next! Prepping the paints/rod.. Hope you guys are preparing a Buster Sword build next ;)
That is amazing, so happy to hear it came out well! We were considering building Sephiroth's Masamune, but we would have to take out a wall or two to fit it in the shop. The Buster Sword is much more reasonable haha.
Beautiful work!
The graphite makes it look super believable.
Is there some sort of sealant or clear coat you could put on the blade after to help keep the graphite from coming off after the build is done? It seems like it would rub off on everything #.#
Thank you!
We did not actually seal the graphite in and it has held up very well - even after cutting a cake with it!
Fantastic work ! The blade looks so real! Hey do you think you could make a sword of omens ? Would love to see your take on it , great job !
Give Me Sight BEYOND Sight! - Great suggestion, thanks!
Nice guys. Can't wait to try this. Also love the chill style of the video. *Subscribed*
Thanks! We have sort of similar project coming up later this month!
Does the graphite finish need a clear coat? i'm curious to know if it slowly rubs off and needs re-applied as well. Thank you! (also, sorry for necro post...)
I love the shininess of the graphite but the fact that we see the stroke application of it near the hilt makes me doubt if this is something I would gor for. Maybe chrome spray paint with a clear over it could net similar results?
Go video btw, it does look amazing overall
Thank you! Yeah the overall effect is really nice but it does bring attention to any minor defects haha. Maybe in our next master sword video 😏
Amazing work
Thank you!!!
First vid I see from you guys! Subscribed immediately!!!
Thanks so much!!
What's the length of the threaded rod?
36 inches
Beautiful build, I do have a question: is there an alternative to graphite powder? Bause it’s not in stock for Amazon anymore..
Any silver spray paint would give you great results as well!
I'D GLADLY PURCHASE ONE IF IT WERE ON SALE!!! 😍😍😍🤩🤩🤩🥰🥰🥰
Well thanks! We have something planned for the near future - keep an eye out!
I know it's been awhile since you guys posted this, but I have a question that I want to get your opinion on. I glued (using CA glue) two segments of the blade at a bit at an angle (like after I glued all the halves together and then was gluing each of the segments). I was thinking about using a soldering iron with a thin tip to try to melt a little inside the joint and then adjust. What do you suggest?
Aww that is the worst - but we have heard of a trick (we have not personally attempted this) you might be able to correct the bend by submerging the whole piece in some hot water (just tap water, no need to boil it) then quickly placing the whole piece on a flat cool surface apply gentle pressure to correct - Best of Luck!
@@make432 oh awesome! Thanks for the quick reply!
I am going to start this Project too now. I have a question about the Rod. How long should it be? in cm I mean. 50? 100?
We used a 36 inch rod that we cut down to fit snuggly - we, unfortunately, don't have that final measurement, but a 36inch piece will work!
Hello. I’m wondering how long the threaded rod is? I’m almost done 3D printing mine and I’d like to know how long it should be incase I have to cut mine. Thank you ^^
You should be good with a standard 3 foot rod - you might just have to trim it a little to fit your print. Good luck, we would love to see the finished product!
Nice work do you know of a sheath that it will fit in
Nothing that we know of just yet, but keep your eyes out for something in the future.
do you guys do commissions for the master sword to make it?
Unfortunately we do not have the time to take on commissions - but thanks for the interest
I am in the process of making one of these and was wondering if there are any additional tips on hot to hide the visible lines from the blade area. I have filled in and sanded multiple times and hit it with a coat or 2 of primer but they are still there. Whats the secret? Trial and error till perfect?
Sadly it is just a lot of filling and sanding. Make sure when you sand you are keeping the paper flat - we fin using a block of wood with sandpaper attached keeps it level. It is also important that everything is really secured together with glue, otherwise the gaps could reopen. Best of luck!
Yooooo!! Now make the Hylyian Shield
maybe?
This is so cool! my friends currently printing my parts as i plan to make two of these, one for my zelda obsessed girlfriend and one for myself as ive always wanted a master sword replica on my wall. its really easy to follow this tutorial but my one question is how long of a threaded rod should i use? you guys didnt specify the length so i just want to make sure before buying anything!
You should be good with a standard 3 foot rod - you might just have to trim it a little to fit your print. Good luck, we would love to see the finished product!
I noticed when you put the two parts together the handle broke apart, any tips on how to prevent that?
Good eye! Yes we were rushing our build a little and didn't spend enough time sanding our parts, meaning everything was just a little too snug. Spending a bit more time sanding and cleaning out that inner channel after printing should solve any splitting issues!
@@make432 thank you! I've been watching this video over and over until the sword is done printing. I love you guys :D
@@mightyheidi5857 That's awesome! Thank you so much! We'd love to see it when you're done!! :)
How much to buy one of these from you?
Stay tuned we are going to have a shop up soon(ish)!
Same as you I love the result when using graphite to get the metallic finish. Does it need a protective layer on top after adding the powder in order for it to not degrade or is it enough to rub it on the surface?
We have found that the surface is pretty durable, it might just need some more graphite later on.
Interesting...
> I love the Legend of Zelda series...
(What are the songs that are used in the video? / They're not listed in the description...)
Thanks! James actually made these songs himself. Maybe we should put together a make/do album?
Good! continue doing nintendo stuff please!
Thank you so much! We actually have a Nintnedo video coming up next... well Pokemon technically haha.
Hello , the color of the filament is important or nah ? I have black, red.
It does not matter - the paint will cover the original filament color so you can use whatever you have!
@@make432 ok thank for reply, i was asking for the lame, maybe the silver powder will not doing the great effects if the filament is red
how did you guys glue the rod in? did you pour the foaming glue in the sword 1st then insert the rod or did u glue the rod then stick it in?
we coated the rod with the foaming glue then inserted it into the blade - However you can use a 2-part 5 minute epoxy for the same results without the mess.
Does the Graphite Powder wear off? Or did you put a clear coat over it?
The graphite finish is surprisingly durable. We did not use a clear coat and it has held up just fine. Oddly enough the only thing that took the graphite off easily is when we cut the cake at the end of the video, so as long as you keep it away from frosting you should be good haha.
@@make432 Never seen the stuff used before, but it makes the blade look awesome. Ordered the stuff to make my own, and I'll need to make a matching Shield after I find a high quality model.
Do you sell the sword?
This is great! I’d suggest checking out make up applicators instead of cotton balls only because they are reusable and you wont have to continue buying cotton balls
Otherwise this is a great build
Fantastic idea! We will keep that in mind, thanks!
Great work! Now you need to do a stone to put it in to :D
How do you sand small details like the triangle force? Did you just ignore this part?
Thank you! We've been thinkin about it 😏 We did just ignore sanding the tri-force since it didn't look too bad, but it could be done with a hand sanding sponge or a makeshift file, wrapping sandpaper around a popsicle stick, etc. :)
I was wondering what print setting you guys used for this, what infill %?
Our standard settings:
.2mm layer height
15% infill
4 perimeters ( adds a nice buffer to sanding)
@@make432 thanks im printing this right now I hope it turns out as cool as yours
@@make432 also one more question would regular gorilla glue work for just glueing the halves together?
Which color rub-n-buff did you use? Beautiful work on the sword. I'm a fan!
Thank you!! It's antique gold, here's a link! amzn.to/3AbzwkF
The activator is really important or not ? If i juste wait it can work ?
You don't need it! It just speeds things up! a
How long should the rod be
We don't remember exactly but we had a 36" rod that we trimmed down to length, a 36" rod may work without trimming as it can go all the way to down the pommel!
And if i don’t have the plastic wood, is it really bad or not ?
You should be fine, just some extra sanding might be needed!
I am also now done with mine. I like it but the model itself for me wasnt really good. the blade didnt fit together so I had to do an extrem amount of sanding all edges flat. It was really extreme.
Sorry to hear that 😬 this is one we've tossed around the possibility of remodeling, maybe we should pursue that?
No lie, we were ALL pissed at Miyamoto and Nintendo for acting like Zelda's 35th was mere peanuts compared to Mario's....still am, even though TOTK was a massive success
What is the imprimante you use ?
We use a Prusa i3 mk3!
Poor link, they took his sword and they sealed him in the description lol
haha i'm sure he'll find it eventually...
Hey guys! After seeing how well yours came out, I'm switching from silver spray paint to graphite for my first project, the master sword! Just one question, I have the sheath to go with it and I'm worried about the graphite rubbing off. Do you guys have a problem with that? I would clear coat it but I'm worried about losing that metallic finish. I've watched all your videos, you guys deserve way more subs than you have. I hope your channel blows up :) ps. I was your thousandth sub! You were at 999 when I subbed the other day!
Happy to have you join us and thanks for pushing us to 1000. We have found that the graphite is pretty durable and not much causes it to come off. The cake we cut at the end of the video is actually the only thing that seemed to remove it easily haha. But you can easily apply more graphite in the future if you do see some spots wearing down.
One if the beat 3d models made for printing the only real problem is the person made the handle too thin.
We might be working on our own dream version of the Master Sword that works out some of the issues we (and some others) have been having with the files - keep an eye out!
@@make432 bro that'd be awesome!
@@make432 if you need a modeler, I have experience with 3d
this is amazing in playback speed 1.75
I wish I could sand at 1.75 speed IRL
Where’s mine
... I think we might have lost it in the woods
you could have just Printed the Blade in Glowing Blue PLA..
... adding that to our project list haha. That would look amazing!
Where’s mine
Update we checked again, but we got even more lost.
@@make432 That is why it is called the Lost Woods... Haha