Это видео недоступно.
Сожалеем об этом.
Master Sword "Replicas"
HTML-код
- Опубликовано: 27 окт 2023
- As a Zelda fan, I’ve wanted a replica of the iconic Master Sword for some time. Over the years, I did occasionally look up replicas, but never thoroughly searched to find a definitive one. However, that’s what I’ll be doing in this video: Looking at every affordable Master Sword replica I can find online and figuring out if any are worthy of being displayed in my bedroom.
Music used:
- Minish Village - The Legend of Zelda: The Minish Cap
- Termina Field - The Legend of Zelda: Majora’s Mask
- Skyloft - The Legend of Zelda: Skyward Sword
- Groose’s Theme - The Legend of Zelda: Skyward Sword
- Dragon Roost Island - The Legend of Zelda: The Wind Waker
- Ghirahim (Phase 1) - The Legend of Zelda: Skyward Sword
- Skyfield - The Legend of Zelda: Skyward Sword
- Miniboss - The Legend of Zelda: Ocarina of Time
- Pursuit ~ Cornered - Phoenix Wright: Ace Attorney
- Divine Trial (1 Terminal) - The Legend of Zelda: Breath of the Wild
- Divine Trial (3 Terminals) - The Legend of Zelda: Breath of the Wild
- Colony 9 - Xenoblade Chronicles: Definitive Edition (I couldn’t resist adding a Xenoblade track, lol)
- That one part of the 3rd Tears of the Kingdom trailer track
#zelda
Bro wasn't the chosen one, so he just took the sword with the stone attached 💀
no, he just attached it for more power, just like in TotK.
bruh pulled it like he Jack Horner in Puss in Boots 2 💀
Yeah I couldn’t get this rock off but still pretty cool
budk
Dude is a cardboard artist
AND HE STILL SPITTING BARS
@@placodermwisp8229 lol fr
take a shot every time he says hilt
Alcohol poisoning speed run
Yeah, I really wish I had brushed up on my sword anatomy before recording this, lol. Though, you’d still be comatose if you were to take a shot every time I said “guard” in that case. If it means anything, I just assumed “hilt” was another way of referring to the guard since you could call the handle a handle or grip, and sheath a sheath or scabbard. It seemed like every element of a sword had at least 1 other synonym from those two instances alone, so I just thought when people mentioned the hilt, they were referring to solely the guard.
I did realize the error by the end of my recording session (I didn’t feel like recording over every single time I improperly used "hilt", lol), so I do refer to the guard properly at 19:23. That’s one less shot you guys would have taken.
Rip
5:02 I have this replica and can confirm part of the guard broke off when it fell from my umbrella holder
I have one too, it broke as well!😢
I got 2 and it happened to both haha
Same thing happened to mine, the guard straight up broke in half down the middle.
Same though it was when my mother accidentally bumped into the wall while vacuuming (easy to fix
Finally someone pointed out the master sword "replica" scam
Sadly we non rich adults have no other choice!
I have the light blue one i of course knew it was fake but i really wanted a foam one!
I've been in Master Sword replica hell for the past few months just like you and I'm so glad someone else shares my experience.
I am back a month later. I was thinking about this video lol. I managed to nab a preorder for the Proplica master sword... My god, the images of it are beautiful. Accurate scabbard, accurate handle, accurate everything, AND SOUNDS. God I'm so excited. Hopefully they release more though because I fought tooth and nail to be able to get an order in! Godspeed.
@@Wisplore I'll get a metal replica of the master sword that a dude from my country sells for $111, it's made from a mold of the foam sword at 7:04
7:00 Well, here's the plot twist: the Master Sword's hilt it NOT purple.
The thing is, just like the Master Sword has only been blue in one game, there's only one game in the series in which the Master Sword has been purple too. And that's Twilight Princess.
So if it's not blue nor purple... Then what color is it? The answer is INDIGO.
Indigo is the color that sits right in between blue and purple. But depending on the lighting, it can look bluer than it actually is. Also, one of the most common forms of colorblindness is one that makes people struggle to see shades of red, so for them the Master Sword always looks blue.
Hearing him say 3d printing is "lazy" hurt my soul
You wouldn't know genuine effort if it snapped it's pink bra in your face.
The amount of time put into modeling, printing, sanding, priming, and painting a prop the size of a damn sword is probably more than anyone would be willing to put into something that would be sold.
For as nitpicky a person you seem like, I would've expected you to understand the level of detail poured into it.
Bruh most 3d print users just get a model off the internet take off the support and boom they got a sword and they did it with the right color they don't even have to sand or paint it
what’s with the random misogyny?
tf u on about
man really pulled out misoginy over a plastic video game. and also calling 3D printing lazy, even tough it takes HOURS or even days depending on the whole product, and sometimes it just doesnt even work properly
This dude… he had to throw in the women hate with the sonic😂 tell me you’re bitchless without telling me you’re bitchless
Huh
I'm sayin brahh
Oh, go dilate.
I pretty sure the guy was hating on how a huge portion of the pictures of humans wearing stuff on amazon and similar sites are just poorly photoshopped stock photos. "Fake" was being used in the same way one would call a tree octopus fake.
3:27 bro pulled out the misogyny + sonic render combo over the silly metal stick 💀
would've been funnier if after he said that we saw that one clip of Ninja with a big butt imitating them
Exactly what I thought watching this.
seriously though it was so unnecessary
How disappointing
came out of nowhere lmao
that last sword having a dulled out tip might be due to the bladed weapon safety regulations of wherever they are?
Makes enough sense
sorry i think it’s funny that at 18:00 “lazy 3d prints” are bad, but then at 18:04, the sword is good, even when, except for the blade, it’s visibly 3d printed💀
Not only that, there are some other swords i saw in this video that were VISIBLY printed.
The 18:04 is actually cast in aluminum. Used 3d printed forms.
@@ej-1608 the blade itself is but the hilt is entirely 3d printed. an issue with many master sword replicas like those is that the blade outweighs the hilt and literally snaps out of it. obviously still visually cool but the irony in his observation was funny
Calling 3D printed prop sellers "lazy" and how "the machine spits it out" shows how little you know about it. There is an entire community around 3d printing props, and as someone who does the hobby myself and has 3d printed a 100% accurate master sword from botw, the process is painstakingly tedious and labor-intensive. Not only do you have to have your printer settings tuned damn-near perfectly to get it to print right, the amount of sanding, priming, filling, and painting that takes place afterwards is insane, that is only if you have the dedication to make the prop look smooth and not printed, which is what I do. Think whatever you wanna think, but 3D printers do way more than just spit out models. They aren't magic machines.
lol
I agree completely with this. plus getting the models can be a headache
@@owenbyrne9850 Yes, ESPECIALLY if you model them yourself. That's a whole other beast.
Ok yah I agree and disagree at the same time on the premise that he wasn’t just looking for a 3d printed version he was looking for anything acrurate
I suppose if you compare it to actually forging a replica, 3D printing it is prettu much still is a small feat.
Bandai is making one for their Proplica line, so good news!
From the pictures it does look exactly like the one in BotW but the proplica line uses PVC, so when it comes out I'd wait for a reviewer to get their hands on it before I buy it.
@@Mb_Drei That’s fair. I have a metal replica and those always feel nicer, but the bandai one might have cool effects
Yup, it actually looks incredible, so I’m waiting for that one to hopefully deliver
The struggle to find a good master sword replica is real…
Can you show me a link?
Oh, Thats great! I already have their Keyblade Proplica (and credit card debt) They're Sculpts are great!
The full tang master sword is how the master sword would look and function as an irl blade made for actual combat. Yeah its not accurate to the games but it's accurate to real life function which I think is pretty neat
I think it look pretty close the the link to the past master sword
Bro knows nothing about 3d printing. It is not a press button make product process. There is tons of work that goes into 3d modeling software to make a quality model. Even with the most expensive machines there is so much fine tuning and settings optimizations required to get a decent result. Getting the perfect settings for your machine can take months or even years. And even then there is hours upon hours of post processing, filling, sanding, painting, assembling, and even sometimes mold making. To call 3d printing lazy is just stubborn ignorance and dismissive of an artform you clearly dont understand.
Sure, theres plenty of 3d printed garbage and crap looking products because the barrier of entry has gotten so affordable but most people dont put in the work to master this craft. But that is true with every artform.
No way this dude having a fit about a sword from a video game is calling 3D printing lazy.
bro really had to pull out incel rants for a video about plastic swords 💀
Sounds like you just need to make that financial sacrifice
I love watching video about viddy game and then misogyny 3:28
XD
Whaaaa whaaa whaaaaaaaaaa
bro it was just an of girl joke chill out
Master Sword from LTP and several other instances have had a blue color or aura to the blade. They handed you diamonds and you apparently didn't have enough hearts to shoot the beam!
Amazing job on the paper art though, Id have that stuff on display.
If it's a joke @ 3:30 or not, it left a bad taste. I was interested in the content and now I just have the ick from you.
"Now i jusst hab ther icky wicky fwom u"🙏💀
No FR like what an absolute loser 😂
@@steezuz_christdid you just have a stroke? you good??
You got offended over a four second joke in a 20 minute video a joke that by the way was making fun of (at least in my interpretation of it) only fans models
@@SumGum cause its gross. Get the bag however you can. Aint no shame.
Bro’s the kid that would complain that the Lamborghini he got for his birthday was the wrong colour.
Literally
Shoutout to Jawa's Junkyard and The Saber Trade for making the first ever purchasable Master Sword lightsaber; that thing is so cool.
Could be better, though; an auxiliary button, and internal railings for easier chassis insertion would be nice. The normal button is also pretty easy to lose, so I feel like spring-loaded buttons would work better.
4:01 thats the master sword from A Link To The Past, that's why it looks so different
Was about to say the same thing right from the official artwork.
That brass sword has been around for some time. I remember seeing it years ago, and back then I too initially believed it was emulating the look of the Master Sword from A Link to the Past. I do show that sword later in the video (16:50), but I’m not seeing the resemblance you guys seem to be seeing. The shaping of the blades and guards aren’t the same, the guards’ colors don’t really match, the handle on the official art is red with a completely different texture, and the hilt gems are different shapes.
www.heroicreplicas.com/portfolio/link-to-the-past-master-sword
That’s a link to a replica of the ALttP Master Sword by Heroic Replicas. It resembles what's depicted in the official art significantly better. Also, a couple other commenters here have brought up how this brass sword was created by some guy who wanted to make a more practical Master Sword, and manufacturers just took his design and pumped out a bunch of replicas of it. Considering there are many listings for this sword on Amazon and other sites- all with minor variations in not only the sword itself, but the scabbard as well- I’m led to believe the narrative that it’s merely a reimagining that was simply stolen and mass produced (and not someone’s attempt at replicating the ALttP’s Master Sword).
Then again, I could be completely blind and not be seeing what you guys are.
@@niftydrifter Heroic Replicas also has a nigh 1:1 replica of the modern Master Sword, albeit extremely expensive. I got some custom work done from them a few years ago on an upgraded version of the cheap HF Murasama replica you'll see everywhere on the internet
@niftydrifter actually nevermind apparently you mentioned it in the video and I just wasn't listening actively
based on the cover art maybe
1:24 these are geniunly awesome, and are a lot more impressive than if you did just print the templates
Loved the crafts u showed at the beginning of the video, it reminded me of the ones i used to do when i was a kid myself! Gotta say tho, the casual mysogyny at 3:27 and 3:49 kinda put me off lol, maybe work on that :)
…That isn’t mysogyny lmao
#1 is bashing Onlyfans models and #2 is bashing ‘fake gamers’ jokingly
@iamerror6546 it is, #1 is bashing specifically FEMALE OF models and #2 is implying female = fake gamer
@@dasideaccount 1.) Female OF models specifically are the ones that make the absolute most on there so it’s a general statement to say ‘Talentless OF Model’ and specifically mean women, who make a lot more on there compared to men.
2.) He was talking about the woman in the image, who absolutely looks like somebody who was paid to dress up like that and nothing more. As in a ‘Hey guys look it’s a woman that likes this! You should buy it!’. Plus the entire video is about inaccurate replicas and he sorta implies that you’re a fake zelda fan if you like the other ones too. Stop with your whiny ‘He’s a mysogynist!!!!!’ bullshit.
@iamerror6546 keep kidding yourself all you want, i really don't care. I never said he himself is a raging misogynist, but he was, in fact, making misogynistic jokes. Bye :)
@@dasideaccount When it’s against a woman, it’s mysogynistic. When it’s against a man, it’s all in good fun. Sod off with your unneeded comments on it
This is a very very good video. The research, editing, and overall talk wins my heart.
You know, I unironically wanted to do a video like this, talking about the same swords and stuff and you beat me to time. But hey, congrats! It's still a great video, and I really liked it!
If you want to be a mildly attractive girl with no talent you can just be a mildly attractive girl with no talent, no one is stopping you
that's not how that works
@@valiantviktor Yes it is
@@SibLight nah not really
@@valiantviktor do you think transgender women just spawn from the aether?
@@SibLight wait those are real things?
5:03, the guard does indeed break easily, i got this specific one as a gift in like 2014, i was carful with it, but it did end up breaking eventually, i still have it, the guard is pretty much all gone, and the blade wobbles, not the best quality in general
"This is it! The Master Sword!
... ... ...
No, this can't be it. Too bad."
This fits perfectly.
My favorite parts are the incel shit and lack of understanding 3d printing props. Especially since the last one he complained about had clearly 3d printed parts.
Always a good day when nifty uploads 😁
a personal theory of mine about the master sword upgrades in alttp and albw is that maybe the sword was weakened due to it being the bad timeline and never having been picked up by the hero of time and rusting away so it needs to be restored
1:17 sonic be rolling around, since you mentioned him aswell as having zelda content, imma sub now
Terraria, Minecraft, Sonic, Zelda stuff in one video, amazing content pal!
He has my respect for the true nights Edge
I dont know if you have seen but Proplica are bringing out an official master sword and it looks amazing, perfect PURPLE colour. I do want to get one from heroic replicas though as they are probably the best out here, the hylian shield also looks amazing by them.
It's illegal to have videos so awesome with only 20k subs
yeah! I'd expect 40k subs at least... I wonder what's scaring half the ppl away?
this video is so ✨💫autistic core💫✨
It’s called having interests
Ever heard of interests?
@@HiatricI’m autistic and this video just radiates it
it's like trans fem levels of autism but misogynistic in an unfunny way (compared to trans fem misogyny, which is always funny)
I bought the one at 5:54 when I was like 11, I still have it over a decade later, but the tip is broken off and the wings on the guard have also gone throughout extensive use. It was a nice nostalgia hit to see what it originally looked like, haha.
I also got the dark variation of the "weird blue lip" version as a christmas gift not too long ago, it makes for decent enough office decor.
Love the video! I'm a fan of RUclips which pushed me to wa-
But actually, I love the video, and personally believe you should be a bigger RUclipsr with the quality of the content.
never once did you notice the taper of the blade's edge going toward the tip as a detail, which many of these were not accurate with.
also, the idea that the Master Sword should never change appearance or need upgrading is fantasy on your part. in the canon of the games, the power of the Master Sword can and does fade over time. it's a part of the plotline of Wind Waker that its power must be restored. in Ocarina of Time, it's able to send Link's consciousness seven years into the future, but by A Link to the Past, it's so weak that a random blacksmith can strengthen it with a standard tempering and you still need the Silver Arrows to help destroy Ganon. speaking of the upgrades in A Link to the Past, by the way: they don't literally look like the concept art you showed. it's concept art for a reason. the in-game sprite shows the same sword with updated color schemes, and in A Link Between Worlds - the direct sequel set in the same Hyrule which also makes available those upgrades - it's shown to be the Master Sword in its original form, just with a changed blade color.
you _still_ aren't the Zelda expert you think you are. add to that your casual misogynistic comments, and we have ourselves a real loser.
this fandom doesn't need your voice until you do some growing up.
Both you and the creator of this video need to chill
(Although, before you get me wrong, you _are_ right.)
I am a person that likes to imagine what it'd be like if the games were done better/in a different way (like mixing BotW and TotK's story, mechanics and looks to make the perfect modern Zelda game, or making a hypothetical TotK based HW: AoC mod), so I get what he says about Link from ALttP simply throwing the M-sword to something like a blacksmith or a pond to enhance it, however, the M-sword wasn't in its prime (actually, far from it), so it's comprehensible why the upgrades.
On the other hand, the names...
Yeah, maybe instead of tempered and golden sword, we could have gotten the tempered and golden Master Sword. Although, it was the sword's debut, so, as the video creator said in one of his comments, it's not that much of a problem. He could have been less picky about it, though.
Also, one minor mistake in your comment- ALBW isn't ALttP's sequel, it comes after the oracles and LA (not Los Angeles, Link's Awakening lol), with a different Link from the other four games. It _is_ on the same Hyrule, and it's also a spiritual succesor to ALttP, because of the story, Dark World, items, etc. (Hero of Legend/New Hero of Legend, although the 2nd name is lazy). For reference, the follow-up to ALBW is TH (Triforce Heroes, which is barely a Zelda game in terms of story, although I love the mechanics except for offline game).
yeah you’re right. i clicked on this video bc i’m a massive zelda fan and i thought this would just be a fun vid poking fun at poorly made master sword replicas. but this dude gives off major incel vibes, i couldn’t keep watching after the second sexist remark he made.
Finally someone who thinks this too, I really wanted to enjoy this video but by the second random misogynistic attempt at a joke I was put off. Pair that with the major "ermmm achshually the Master sword should be like this all the time because its my favourite and that means its the best" energy and you get an uncomfortable user clicking off and removing their like.
Oh fuck off, all you drooling, gaped, herpes-ridden *PUSSIES.* Calling out e-whoredom is absolutely based.
I have the costume prop at home and it’s not that bad if you just want a Master Sword replica for an affordable price. It’s just plastic, but it’s still better than many of the other swords shown in this video. In fact, I still have it on display to this day!
"why is a shield tall" lol , tp was tryna be realistic and gritty, did you forget ?
Love ur vids hope u upload more in less time bro
So, I bought that Twilight Princess shield at an anime convention years and years ago. The handles broke from me just carrying it around. You dodged a bullet on that one. The screws holding the handles in place were less than half an inch thick.
ok so two things 1: i have that same master sword light and 2: i went to west edmonton mall and saw a perfect master sword replaca
I think I might've seen the same one
About your issue with upgrading it in A Link to the Past, it still is a Base 30 Damage weapon, upgrading it to a 120 Damage Sword like in A Link to the Past is actually pretty sick.
And the Regular Master Sword cannot even hurt Ganon in A Link to the Past without using spin attacks because Ganon has the Full Triforce in his Posession and the Holiness of the Master Sword isnt that powerful enough , it needs to become the Golden Sword
Yeah, a significant damage increase and Ganon being unfazed by anything weaker than the Golden Sword IS pretty awesome, but stuff like that is irrelevant to the point I was trying to make in that tangent. The issues I have with upgrading the Master Sword in ALttP is that it’s physically altered (the color schemes on the swords’ pixel art change) and the ways to upgrade it aren’t necessarily fitting. These two things make the sword seem like it wasn't so legendary after all.
If I remember correctly, the Master Sword becomes the Tempered Sword after giving it to some blacksmiths, then becomes the Golden Sword after tossing it into some pool of water somewhere.
Such methods of upgrading insinuate the weapon wasn’t initially created to be the strongest it could have been. You mean to tell me Link’s perilous journey to temper the Goddess Sword into the Master Sword in Skyward Sword wasn’t enough, and sometime later another incarnation of Link just had to throw it into some fancy water to make it way better? Hell, it's not even called the "Master Sword" after the upgrades, which further sullies the mythical weapon.
Sure, if the sword is initially weak because of some excuse like dissipating power between games, that’s fine because it means the sword was initially much more powerful. If it can be upgraded, it should be through means less superficial (if that makes any sense). That’s why I mentioned Breath of the Wild’s Trial of the Sword being an exception, as it was merely unlocking the original, true power of the sword, and the method of getting said power wasn't something lame-ish like giving the sword to little blacksmiths who pound it with some hammers centuries after the legendary sword was born.
If there were some Captain America game where you could collect pieces of metal to reinforce his iconic shield, that would diminish its strength and origin by implying this near-indestructible weapon wasn’t created to be the best it could have been, and could easily be made better by finding some random chunks of metal somewhere. There would have to be some appropriate lore like, “Oh, before Howard Stark [the creator of the shield] died, he left some notes detailing the locations of several previously-unknown pieces of vibranium he would have loved to add to the shield himself,” in such a case.
Perhaps I should have been as explicit in the video as I am here, but I thought my mentioning of the BotW exception was sufficient. Hopefully, no one gets super angry about it, but if they do, maybe they’ll run into this comment for the clarification.
This whole thing is super nitpicky, I know, but I guess as someone whose first Zelda game with the Master Sword wasn’t ALttP, I expect the weapon and its reputation to be consistent. Again, Nintendo likely didn’t realize the Master Sword was going to be such a staple back then, so it’s not really that big a deal.
@@niftydrifter
I caj completely understand that, but the idea that the sword can become evem stronger was also used in other Scenarios, we simply seem to forget that.
In Twilight Princess while the Sword is able to do an Exorcism on Link everytime he transforms into a Wolf when touching Zant's Shadow Crystals he made with Ganondorf's magic.
But only after powering up the Master Sword with the Light of the Sols it can cut through the Fog made out of Shadow Crystals.
And even Tears of the Kingdom showed us that the Master Sword can become stronger.
Not only did Zelda purify it to be immune to Gloom Corrosion which caused it to shatter, it also does the same ammount of Damage while almost every other Melee Weapon got a debuff of around 1/3 of its former strength (which is most likely Because the injury of Link's arm might reduce the force he is swinging the Weapons with)
Which means for example the Boulder Breaker was a 60 Damage weapon, now it is around 40 (38 is shown but claymores and similar 2 handed weapons deal 5% extra damage)
The Royal Broad Sword made 36 in Botw, now it is 24
The royal Guard Sword deals 48 in Botw, in TotK it's just 30
And the Master Sword kept the same damage values, which does theoretically means it did indeed get a bit stronger, considering that it should have 20 if it has the debuff as well but instead it still has 30, and eventhough it does only 45 damage in the Awakened state you also should remember that 60 Damage in Botw would be equal to 40,which means the Master Sword is even in the Awakened state a bit stronger.
it is just Link's Arm which is pretty weak.
@@Chris-gx1ei Lol, when it came to the weapon nerfs in TotK, I just thought of it from a game design perspective, where they clearly wanted you to power up the swords with Fuse to make them stronger, so I didn't think much of it. Link's arm being weaker is a good in-universe explanation, but I can't really agree that "60 damage in BotW is basically equal to 40 in TotK" especially since the sword does power up to 60 in TotK when fighting Phantom Ganons and Ganondorf. I understand where you're coming from, though. Everything else being weaker understandably makes the Master Sword seem stronger by comparison.
The sword no longer being affected by Gloom after it's healed is a better example of a genuine upgrade, as it shows the sword had adapted over time, but that's a more relative addition there to explain how it can now stand a chance against this specific Ganondorf and doesn't really change anything gameplay-wise. This likely won't be referred back to in later games (unless Gloom were to make a return). When the next Zelda game that has the Master Sword comes out (and takes place after TotK), it likely wont seem any stronger just because it became immune to Gloom previously.
As for Twilight Princess, I didn't mind imbuing the Master Sword with the power of the Sols since it didn't really change the look of it, only applying some light around the blade. On top of that, the power is only present when Link is in the Twilight Realm, so it always felt more like a surface-level addition to the Master Sword rather than a true upgrade (similar to fusing things to the sword in TotK). Like what I said about the Gloom immunity, the light of the Sols upgrade is more just a gimmick specific to Twilight Princess that has yet to be referred to in other titles since we haven't explored the Twilight Realm outside that one specific game.
In the end, as long as there's no drastic change in appearance to the sword when "upgrading", I'm fine with it. Raw damage numbers don't matter much since they're relative to their respective games (I lump BotW and TotK together since they're directly connected), and neither do specific changes to the weapon that are there more so for lore/consistency (Gloom in TotK) and gimmicks (Dark Fog in TP). Something like A Link Between Worlds with the Master Ore upgrades is different, in my opinion. We permanently added more metal to the sword with 4 chunks of ore, and since it's blade is now yellow/golden to reflect that upgrade, it should stay that color in later games unless we had lore explaining how the additional metal was taken out of the sword between games somehow (let's ignore wacky theories and timeline stuff, lol). Essentially, the additional power the sword gets in TotK and TP is different compared to direct strength upgrades we see in ALBW and ALttP.
I also just don't like the inconsistency of something like, "The Golden Sword was the only sword strong enough to damage Ganon in ALttP, but in Ocarina of Time the sword was capable of beating him without such an upgrade". I guess that would lead some people to argue OoT Ganon was actually weaker than ALttP Ganon, but at that point the discussion's just going to get tiresome, and I’ll just fall back to, “just keep the Master Sword’s look consistent”.
@@niftydrifterlate to the party, but oot ganon is significantly weaker than alttp's ganon, seeing as alttp takes place hundreds of years after oot during the fallen hero timeline. the master sword was essentially abandoned in a clearing for hundreds of years, bathed in sunlight and protected, yes, but while its base form might have once been enough to stop ganon, since ganon is in possession of the full triforce, not just the triforce of power, and has grown stronger in the hundreds if not thousands of years after killing the hero of time, it makes sense that the once unbeatable, divine sword doesnt have the power to do any direct damage to him anymore, thus upgrading and reforging the sword to be stronger makes sense, since that is technically what happens in skyward sword with the goddess sword once being strong enough to defeat demise, but needing to be forged into the master sword to defeat him once more.
both windwaker and breath of the wild show the master sword having lost its power and needing to be restored before becoming the true blade of evils bane, so its not outside of lore to think that when the master sword is returned to its pedestal and loses a wielder, it slowly loses power until its able to be returned to its full glory, whether it be through trials, practice, or reforging.
sorry for the rant but thats just how i see it, taking in account of the lore
@@themainnerd0566 Technically with the full Triforce Ganon is Potentially Omnipotent with minor limitations the moment he has it, I don't think he can get more Powerful than infinity over time with it. The moment you have the full Triforce under control you are almost as powerful as the Christian God, the Zelda Multiverse obeys your will when you have it - but they are some minor limitations to the Triforce, like for example that Members of the Gods Tribe cannot use it or that the Sacred Realm actually keeps its power within itself so that no one can simply wish himself out, or the Master Sword being the only weapon immune to its powers.
16:35 My guy, it was the third game in the damn series! They weren't thinking that far ahead!
Lol, yeah, and at 17:19 I basically say that by acknowledging ALttP was when the Master Sword debuted. Maybe if you had waited 44 seconds before commenting, you wouldn’t have had to point out something already addressed, my guy.
You sir, chose the BEST and I mean the BEST loz song to play as the background music. The minish village theme is the most beautiful song on the franchise
I bought a replica on Amazon. It was like $100 total, and it wasn’t that bad, it does have its errors, and I acknowledge them, but for just sitting on my windowsill, in the sheath looking awesome? Can’t complain at all.
Yeah it’s not “perfect” but I kinda knew it wasn’t gonna be. I could absolutely modify it to be perfect. Truth is, I just wanted to have a cool replica of something from my favorite game series in my room. For that purpose, it serves it well.
So for all your trash talking about 3D printing, its painfully obvious you know nothing about the process. I looked up the seller that you say want to buy from, and have shared pictures of his sword. The blade might be aluminum, but its unmistakable that the entire handle/hilt is 3D printed, and badly. Thick layer lines, and no kind of sanding or post-processing.
You don’t UNDERSTAND how much I needed this video in my life, I HATEEEE these “replicas” and it’s so ugly or not even the right color or shape or even design, I’m extremely picky about these replicas just like yourself but this video brings peace to my soul knowing there’s someone out there just like me when it comes to a video game sword being inaccurate
I have the wind waker master sword replica, it's not that bad, still a great sword. Could've been more accurate but what can ya do?
In concept I like the idea of the upgrading the master sword in ALttP since you go through the game upgrading the other equipment in your arsenal, that being said I agree the master sword is so strong why upgrade it. I do actually like the design of the golden sword from the game but I have yet to see anyone make an accurate replica to that sword. Maybe that can be a topic to look into if you ever make another video like this. Great vid!!
18:20 I giggled at that comparison… well done.
Me & my dad tried this & got similar results, so we made our own.
you made me watch a 20 minute long talk about interesting and unique master sword designs instead of making your own, because thats what i expected from a master sword replica, but you did say replicas so i cant argue
Funny story, Bandai actually just announced they’re making a Replica Master Sword as part of the Proplica series. It’s over 40 inches long and it even has a sheath and looks really good.
This guy is so relatable and is so underrated
Even with dark link master sword, the blade would be considerably more black, either completely black sword and shield in the n64 game, or in 3D, the blade is slightly brighter, but it should still look darker than the normal master sword.
Dude just outed himself as an incel
11:26 I loved it lmao
Honestly that paper Master Sword looks pretty good!
Honestly, yeah, replicas can be difficult to get right, and I feel the pain of trying to look for something that's also as accurate as possible.
Just instead of the Master Sword with me, it's actually the Four Sword.
I can almost guarantee it's because Nintendo owns copy rights to the Master Sword.
Someone else selling a perfect replica would be murky legal waters at best, so more than likely they all opt for it to be slightly different to not get sued.
I had all of these problems when I tried to find a good replica years ago it’s actually crazy there isn’t a half decent replica under 300 dollars
Actually, the hilt of the Master Sword is indigo which is in between blue and violet (purple).
9:40 I actually have this replica, but the blade is its original silver color. I bought it at a knife shop in a shopping mall, but I CANNOT for the life of me find the vendor online. When I look for it, all I find is this one with the blue blade, and it's driving me nuts 😭
This reminds me of when I would make cardboard gameboys, and had paper games inside that you would pull up and down the paper to play
Yes! I used to do this too, except I’d make a paper DS and have a long strip of paper with a drawn-out 2D level and slide the DS along it. I was just copying stuff I had seen on RUclips at the time, so it wasn’t really original, lol.
I also remember making a handheld based off the one depicted in this SpongeBob scene:
ruclips.net/video/RuieI8kRfpA/видео.html
and cutting out slabs of cardboard that acted as cartridges you could shove into it. These “cartridges” would have still images of gameplay that would be positioned right at the handheld’s screen when inserted.
Good times.
@@niftydrifterI have a foam master sword that my dad bought for me after my birthday.
Thanks guy! Hope you're having a good one!
you still have the best around ;) ....have you seen the official master sword replica coming out by PROPLICA ??? it has the perfect purple colour. I think if you can match the colour used you will still be number 1
7:04 that one was used by a dude here in my country, he made a mold out of it and made the sword with some aluminum alloy, he sells those for like 111 dollars, they look really nice
“Who wants a black master sword” ME, I WOULD I think they look sick
I have ( probably ) the world's most authentic deku shield.
It's made of a piece of oak bark that was miraculously entirely separated from a chopped log.
Odds are the color hue is slightly off.
But I'd love your critique on it.
( I fully expect you'd put me in my place ) But when I look at other replicas it's not even close imo 😅
The blue blade looks sick tho
bandai proplica just announced a 44in master sword it actually looks pretty good comes with a sheathe it’s not metal tho
I wonder why he considers Wind Waker not canon when it's officially stated to be so?
Edit: Now I feel bad if he actually bought that sword off Etsy because of how PROPLICA came out with their preorders for an official, metal, accurate, $200 Master Sword replica... (this is not an ad, but I wouldn't mind getting paid for this)
The story is canon, the looks aren't.
(I mean, no offense to WW, and I wouldn't mind if I got a WW Master Sword, but imagine TotK Link's legendary weapon with that look.)
Then again, there _are_ theories that say that WW's Master Sword is another Master Sword.
i think he means the most consistent look
The Brass/ gold one is a mass produced copy of someone's attept to make a sword with realistic features as while the proper design is awesome, is quite cumbersome
Isnt it the design from sadiversity? Just in gold?
OOT 3D was my first Zelda game too bro! (and yes, it was the Nintendo selects version)
I found one on eBay that was VERY accurate to breath and tears as well as being full metal, the only downside is that it has no sharp edge along the blade. It can stab the life out of you but nothing else so you better be a marth main with the strength of a Ike main if you used it seriously.
My first game was og ocarina of time, but any is a good first time experience, it made me a fan of the series
Hi, love the video. Im also in the process to buy the shield and sword.
Where did you buy your shield? Looks great!
I just got it off Amazon. Look up “Hylian Shield” and it should be among the first results.
I didn’t mention it, but the back of the shield is accurate as well, as the texturing does indeed match what’s depicted in BotW and TotK and includes a handle and adjustable belt. The belt is affixed to the back, but the handle is not, so there are two holes on the back of the shield for you to shove the ends of the plastic handle into.
Bear in mind that if you’re thinking of displaying the shield neatly on a wall or other flat surface, it’d be best to not attach the handle. Judging from the prongs it has to tightly snap into place, it for sure cannot be removed after insertion (unless you want to break the shield, lol), so I decided not to attach it.
@@niftydrifter nice, i think i found the one you mentioned. Is it hard plastic?
I found another one that looks great as well, but its metal. I might try this metal one.
Thanks again for the response!
Im still looking for a nice Master Sword 🗡️. Your video help me a lot to look closer to those details
@@joseisaacmiron1756 Glad my video could help!
Yeah, the shield's made of a hard plastic, so it’s fairly solid and doesn’t feel too cheap. I wouldn’t recommend trying to block any sword slashes with it though, lol. As long as the metal shield you found is equally accurate, I’d say go for it!
I went to a shop yesterday called “Manga Dori” (it’s in Paris), which sells actual metal swords from various games such as Final Fantasy (there are 3 Cloud swords), but also Master swords from different Zelda games (there are 6, I think, and 2 of them are Dark Link versions)
I’d say they’re pretty affordable, with the most expensive one being around 115€, and the cheapest one being 45€.
Plus, they’re accurate
Edit: btw they don’t only sell these types of swords, they also sell many others, like A CANE SWORD, and also figurines
My sister purchased me the "Twilight Princess" replica blade and i can 100 percent confirm it breaks easily. It didn't even make it to me unbroken
The master sword is blue in OOT, it’s more on the purple side in SS, but in tears of the kingdom it’s back to being more blue than purple
Also totk now confirms that the master sword can regenerate and empower itself. The fusion mechanic means its blade takes on the form of the fusion item. The master sword can just do whatever they want it to. It’s a cool weapon because it doesn’t always need to look the same, it’s allowed to be unique in each game to fit the aesthetic
while it isnt a accuret replica persay there is a zelda mastersword up on museum replicas that while very much takes a bunch of artistic libertys it is made to be a fully functional sword that you can actuly use and use comfortably and certainly worth a look.
i believe the blue and gold one shown at 4:04 was meant to sort of be a representation of the magic sword from the original or one of the upgraded varients of the mastersword from LTTP/ALBW
THE GOAT IS BACK!!!!!!!!
4:59 i had this replica when i was about 16
the guard's did, in fact, break
Dude. This is SO true!!! I feel you 100%
Fun fact: if you actually colorpick the botw master swords handle, it gives you a very dark, desaturated shade of blue, and not just a "oh its kinda in the blue range on the color wheel", no it is FULLY in blue, so thats probably part of the reason blue doesn't look bad on the master sword, despite it being technically inaccurate.
I would like to say I worked on a prop master sword before and when buying paint for it I did realize that the blade is infact blue but not to that extent. What I’m saying is you don’t realize it till you have to color the blade and metal just doesn’t look right. The blade is a very washed, slightly blue color and tinting the blade slightly blue looks far nicer compared to simply coloring it metal. Another thing is my master sword is 3d printed but what I noticed is a lot of people simply sell a file slapped onto a printer in colored filament for like 50 bucks. I actually made mine in all white, painstakingly sanded it to remove layer lines, used gap filler to hide all the seems, painted my hand and airbrushed the parts, and on top of this I made the colors much more accurate to the game (particularly botw) I’m considering opening a shop if I get efficient at making such a detailed product with permission from the file distributer ofc.
I found a pretty decent 'prop' sword at a convention. Designed after the BOTW Sword.
It gets like 90% of the details right (Other than being all metal for the guard/blade, but the other replica was abysmal quality wise) except for the curvature on the sword base that nobody seems to get right. Even the guys like heroic replicas.
The concession you have to take with this kind of stuff (especially on a budget) is 'how accurate can I get without buying a car instead of a sword' and considering your eye for detail. You'll find one soon, keep up the hunt and don't give up!
Drawing them yourself I think makes them way cooler.
I actually sort of went down this rabbit hole in middle school. I’m also a bit of a perfectionist when it comes to props, and even the decent one you decided on irks me a bit. Back then, I just got the prop one because it was cheap and for a Halloween costume, but I’d probably look for something better nowadays. I did find a pretty accurate high-quality foam buster sword that actually feels pretty accurate. It’s not entirely accurate design-wise, but it’s close enough that I’m willing to give it a pass.
I actually have the first one with the blue blade, it’s pretty nice. Only reason I let the blade being blue pass was because of how it glows in botw/totk. That and I was desperate and that one had a nice hilt and a sheath
Watching this hurts on so many levels, you make diy paper and cardboard crafts. Yet it’s too difficult for you to add some paint to something a little off color or sand or file down a rounded end.. and every decent looking master sword just has some minor inconvenience and I just wana tear my heart out every time you move on.