Install 3 Speed Floor Shifter Chevy Truck
HTML-код
- Опубликовано: 1 окт 2024
- Install manual 3 speed shifter how to!
1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1989 1981 1982
Chevy Chevrolet C10 C20 C30 Squarebody first generation Apache advance design
Dodge Ram D100 D200
Ford F100 F150 F250 
Авто/Мото
![NOSFERATU - Official Trailer [HD] - Only In Theaters December 25](http://i.ytimg.com/vi/nulvWqYUM8k/mqdefault.jpg)
I just picked up a 3 speed yesterday with the sifter dismantled in a box. This video is a big help. Would have figured it out otherwise, but nice to see such a good example.
Thanks for posting this. Installing a 3 speed floor shifter looks a lot less intimidating this way. I feel like this is a no brainer upgrade when a clutch needs to be changed since the tranny is already out this makes it so much easier. You might want to invest in a better mic for future videos tho. Not a big deal 👍
Thanks, I hope someone finds it helpful, I did order in a mic, this was shot on my phone and the heater kicked on, gets me every time lol. I Appreciate the feedback!
Want to say thank you. Your video really did help me . I’m working on my granddads old 64 c10 . I got it after he pass away.
Glad to hear!! That’s awesome! Would love to see it!
Hurst shifters last about 3 years. They wear quickly as lubrication points are exposed and wash away. Got a 69 c-10 and i'm desperate to find an alternative. If got a tote full of old Hurst parts.
If doing an aftermarket installment, you will need decent weekend mechanical skills.
I guess it’s dependant on how much use it sees but yes, three years isn’t out of the question if you daily it
I’m having an issue shifting from 1st to 2nd. I will try to adjust it tomorrow.Thank you.
Let us know how it goes
Thank you so much! Such a great help buddy
Anytime. Best of luck to you
Just bought a 53 F100 yesterday and the shifter is muntered - now I know what to find under the floor - Thanks!
Thank u so much for posting. I have 1964 c20 with same Muncie 3 speed with short tail as in your vid. I just finnished rebuilding it and ready for install. I am leaning towards using floor shifter too.....
Right on!
I have the same transmission with a long tail. Some people say it’s Muncie, some say Saginaw. Is it synchronized? Having a lot of trouble finding confirmed info on it.
Where can I find a kit like this? My grandfather is having me help him come up with some sort of shifter for a Muncie SM318 (9.25" tail) he has in a '58 Impala but Hurst doesn't seem to have any options for this application.
Jegs has then
Thanks for posting this. I was thinking about putting in a floor shifter in my 65 C10 TH350.
Go for it!
Turbo 350 and 400 are automatic and won't look anything like this
Can you Help? With my car off my kid pushed shifter into neutral and didn't use the clutch. So now it's stuck in gear. Any idea how to fix this? 3spd ford
For a floor shifter just adjust the linkage as shown in the video, you’ll have to unjam it first at the fork end (opposite shifter side)
This is how you adjust a column shifter, likely it’s jammed, just free it up and adjust. Ford is very similar.
Three in the Tree linkage adjustment! Get rid of the slop, the jamming, the terrible neutral feel!!
ruclips.net/video/sjDc51yd5Nk/видео.html
Hello friend, I am interested in the manual changer that you show in the video, since they do not bring it in Peru and I have a vehicle stopped due to that problem, how could you help me with this problem, thank you
I see them on eBay all the time, maybe you could get one from there
Do you still have the set u did not use? N can I ask what I paided for it, I have been looking someone to do the basics, cause in a Chevy it's the first time 👍, thanks for taking the time to do this for the old timers looking to just pidle around 👍✌️
I sold the old one already, I paid $50 for the new one.
HI: Nice to see an old Chevy "Grind box," I have driven those many miles!
Right on
I'm looking for a shifter like that for my 66 chevy pickup. Do you have one to sell? Thanks much.
Send me a private message through the Facebook or Instagram page, I have a new one in the box and a used one I might let go
@@shortcutgarage I sent a message through Facebook message but I'm not sure it went through. I am interested tho.
How do I get ahold of Short cut Garage I want to make contact
Here or on Facebook or Instagram
How can i get this Chevy floor shifter short cut garage help I need to make contact with you please
@@billmecredy7747 you can find me on Facebook or Instagram. Just contact Shortcut Garage
Where do I get my 63 Chevy floor shifter
EBay has a few, I have a used one and a new one if you want
Great video. I have a 64 C10 that is getting stuck in first and once I get it back to my house I cam going to be able to get it adjusted or repaired based on your video. I'm pretty sure the unit on it now is the same as this old mister gasket kit. I'd buy another one and start over new but it looks like it has either been discontinued or just out of stock because it's probably all made in china now and shortages. if that is the case I'll adjust what I got and fix and replace it. The washers and cotter pins are to adjust slop in between the rods and brackets and I think the kit has changed a little over the years. I seem to recall having installed the very same unit back in 1988 in my old 68 Bronco and I'm getting too old to recall the differences but I think it came with washers and kotter pins so probably just some minor updates over the years.
I’ve seen the NOS Mr Gasket shifters for sale on EBay but hood your hat, the cost on them is out of this world lol. Good luck with the fix!
@@shortcutgarage yeah I am pretty sure a rebuild or adjustment of mine is going to be cheaper and effective. If something is worn too much I will figure it out. I'm a better fabricator than I was back in 88, lol.
Converting to floor shift in my 76 C10. Does all the brackets come in a kit on jegs?
Everything is included
@@shortcutgarage change of plans I’m going with a 4 speed. Should have it in before the end on January. Thanks for the reply. Good to know if I keep the 3 speed for another project
brand and where to buy
Mr Gasket, seen a few on eBay.
Hi. Do you know what the front hole on the bracket is for? The bracket that mounts the shifter assembly. Thank you
Where can I get this
Get what exactly? The Shifter Kit?
For my 63 Chevy C10 truck kit for floor shifter as I have 3 on the tree now ,want to go to the floor
Where can I get this 3SpeedFloor shifterchever truck
They sell them on EBay
That kit u got on that Saginaw 3 speed trans where u get that I got the same in my 62 Impala I converted it from colum to floor it's the 341 Saginaw I need that kit to make this work on this car
I see them on eBay from time to time. I bought mine new for $10 on clearance from a local speed shop. They had pallets of them. None left now. EBay is the only place I see them today. I have a used one kicking around the garage, I’ll be posting it up soon, I’m going to redo this video without the heater kicking on lol. May be available after that. So hang tight, I might have it up next week so you can have a good look at it.
Hello sir great video, I noticed that you mentioned you bought 2 shifter kits and was wondering if you still have the extra one ? If so I would be interested in buying it for my 65 c10 Thanks
I’ll take a look and see if I still have one for you
Excellent video and demonstration.
Thanks! Much appreciated
If the speedo cable is going to rub, just put some shallow bends in the two rods.
Good idea.
why does my linkage rods have to be cris crossed to have the right gear pattern ?
Good question, I have no idea
Where can I find those brackets, name and part number?
Not sure, they came in the complete kits. Shop by my house was blowing the complete shifter kits out at $10 a piece
I need this shifter, wheres a good place to buy one? Cheers
I seen them on eBay, lots of them in fact
@@shortcutgarage i looked, only seen 1 and its missing parts.. im in Canada so probably why its limited, hence me asking on yours
@@MyHairyChin looks like the value on mine just went waaaaay up!!! Just kidding. Hit me up with a private message on Facebook or instagram if you want to take this private and get a price. Same name
r u intresred in selling the old shifter parts
I have another one new in the box if you’re interested. $100
@@shortcutgarage i am how do we work it
If your exchange does not work out, I would be interested in working out a deal for one JWGarvey@yahoo.com.
Thanks again for vid 👍
Message me through the shortcut garage Facebook page. I don’t really want to put my email on here
@@shortcutgarage did you sell it? Id love to get it off you
can i swap the imput and output shaft & tail housing to making it a car unit? I bought a trans, was told it was a car unit. Pulled mine out and its about 6" shorter than the unit i bought lol
If you’re going to go through all that work why not just swap
It out for an S10 5 speed? Not too expensive, swap out the input shaft and reuse your bellhousing, clutch, pressure plate, fork etc. I have a couple of videos on that worth checking out.
As far as swapping input, output and tail shaft on the 3 speed I’m
Not 100% sure but I’m sure the info is out there.
Try the stovebolt forums, those fellas will know better and good luck to you.
@shortcutgarage unfortunately I'm already t5 money into this project with buying a floor shifter kit and the 3 speed itself, so I'm going to attempt to make this work, only one way to find out I guess haha worst-case I'll start hunting a t5 down,