Ford 2000, 3000, 4000 Series Hydraulic Pump Rebuild, Step-by-Step Tutorial
HTML-код
- Опубликовано: 4 фев 2021
- Dan and Rachel rebuild the hydraulic pump on a Ford 3000 tractor. This tutorial applies to the 2000, 3000 and 4000 series 3 cylinder gas or diesel tractors.
Order parts here: farmtractorrepair.com/collect...
Follow Rachel on Facebook: www.Facebook.com/tractorrachel
Follow J&D Productions on Instagram: janddproductionsinc
The producers of this free tutorial do not assume any responsibility for accidental injury, death or dismemberment resulting from the performance of any orations detailed in this tutorial. Please be aware of common safety steps--expressed, implied or not expressed. 
Хобби
Hey Rachel and Mr Dan . I'm from Trinidad and Tobago , im in the Caribbean, a Ford 3000 owner. 1969 Bought it 2 yrs ago.
I must tell you both thanks so very much for your videos. I just changed Clutch , Throw out bearing , Rear Crank seal . Rebuilt the Hydraulic Top lid ,changes the Oring and cleaned my Gear box . I'm now rebuilding the Hydraulic pump.
I must say you all are a huge blessing, yall videos helped me do everything, I'm a boat builder here in TRINIDAD and Outboard mechanic, etc, I use my tractor 🚜 to haul boats that I build and launch and move them around my shop.
It's my first Tractor and I didn't have a clue about it , but with your help I'm able to do the repairs effortlessly.
Rachel sweetie you are a real Gem and I really appreciate your time and effort in Doing the step by step detailed information. Mr Dan that girl of your , is Truly a daughter to be proud of. Thank you as well . Good job guys . Keep it up. ❤😎🙏God bless you both. 😊
Rachel I love watching you and your dad working on projects together. Very informative and I don't even own a Ford tractor.
Excellent! What a great team you make. Love the blooper at the end. You really know your Tractors. Thanks so much.
Thank you Dan and Rachel for this wonderful video. Yes! this tutorial was truly helpful. Keep up the good work.
I really enjoy seeing you and your father work together, so happy for you both!
Rachel, you and your father are an excellent maintenance team. Thanks a lot
The team has maintained the most accurate parts of Tractor Ford. And the most complicated
As always a well done to all who made this video. Love your working on one of the tractors I have a Ford 3000 . Many Thanks for sharing this video with us and offering good replacement parts that I have bought in the past. Thanks Bruce
Love your video tutorials, they help me rebuild the hydraulic pump and top lid on my 9n tractor. Also ordered your kits. Thank you.
Great video and will be helpful to many. Just rebuilt my 3000 pump last week and would've loved this to watch first!!! Please keep up the site. Fantastic.
I followed the instructions in this video and repaired my Ford 3000 hydro pump. I now have a working 3 point hitch. Thank You!
How fun to work with your Dad! Love these videos. Keep up the great work.
Great Job Folks! I recently rebuilt the hydraulic system on my 8n, with parts I purchased from you, so happy with the little tractor now that the lift works properly! Good folks to do business with!!!
Great video, I love how patient you are with your father, it can't be easy teaching a middle age apprentice 🍻
😂
Mi serve un motore ford 36oo aiutatemi
Been following your videos for some time now and they have come a long way in terms of content, photography and quality. Sincere congratulations!
Hello, I'm a 64-year-old farmer who recently purchased a small farm in Goodrich, Mi, off Dutch Road.
My wife and I stopped at the Steiner Tractor store for a look around and to purchase a front tractor emblem for my old 8n!
I took 1 photo of my wife sitting in a chair and the counter clerk scolded me saying, no taking of pictures in the store...
The counter clerk demeaned me in front of another customer, and my wife! I don't plan to return to Steiners or make further purchases from them!
Steiner Tractor should post signs that read: (PLEASE, NO CAMERAS ALLOWED!) to prevent degrading community customers.
(Occurred on Monday, July 17, 2023)
One of my favorite tractors. Great video!
Thank you so much for these videos. They are informative and will help preserve many an old tractor.
Another great video Rachel .You explain the operation of everything so a non mechanic farmer can undserstand
I don't even have ford and watched the whole video. Very informative. Great job you two.
Had a slow to respond pump on a 2000 for years, thanks for this video might get to overhauling it now.
Excellent job. I will certainly watch your other videos since I am restoring my Ford 4400 with 735 loader.
Love the video. Love the tractor. Love the Channel. Wonderful to see you working with your father. A real blessing. I grew up on a FORD 3500 and loved it. I have been looking for the past 7 years for one worth buying here in Chile and they are all in poor condition with cracked blocks and such. One day I will get another one. Thanks from Chile. Jim
One of your best videos, I have a 3000 very timely. thanks 👍
Great video Rachel en Dan! I've a 3000 and I had the same problem. I just fixed it a couple of days ago. Good to saw some tips and tricks!
Greetings from Holland!
Father and doughter , you are perfect team together and l have been following for a long time,watching your videos about repairing tractors, congratulations...❤
Looks like you two had fun. Keep them coming.
Thank You for an amazing video and making everything so straight forward and detailed!!
Prob the best instructional video that ive ever seen that didnt leave anything out. I had some trouble out of one of the gaskets that was to big and i had to grind it down smaller. And trouble pounding in the seal but other than that it went smooth! Thanks for the video i wouldnt have tried it without it.
beautiful dad and together
what an amazing dynamic
thank for the video
Nice to see such a knowledgable young lady.
Another great rebuild video, thanks for sharing!
Wow, explained so well and very organised tools, equipment and cleanliness.
U two are great tractor.mechanics.
Never seen a lovely woman fix tractors, you must of spent alot of time in shed with him and took alot of interest.
Great job, great video footage and thoroughly enjoyed video.
Great video. I needed this about 5 months ago. There are at least two other videos where the gaskets were reversed and the ball cages were installed backwards. This was super helpful, and your kits are much better than others that I used. Please do more videos for the 3000.👍 I used your lift cover video extensively even though not for a 3000.
Thank you.
Step by step practical and instructions very well explained and demonstrated. Thank you very much for the kind services.
Amazing video......i just bought a ford tractor......thx for the step by step video ....helps a looot
I think you and your dad have a lot of fun doing these videos. Enjoy his company and learn from him as long as you can. Both my parents are gone now and it can happen in an instant. Would love to see you do an overhaul of a B Deere engine if you haven't already.
I was just thinking that how thay haveing a good time i wish my dad were closer and do.thing's togeater ond day i well talk to dad and mom in heaven with our LORD
In i taliano per capirlo
Another fine video , thanks Rachel. 👍
Best video ever. Thanks you two.
Συγχαρητηρια!Πολυ ωραιο βιντεο,περιμενουμε το επομενο!
Fun to watch the details and I learned a lot. Thank you.
I am a Ford tractor mechanic from the early 70 and I have broke a couple seat puller tools in my time. I must say my hats off to you young Lady. Can't count the number I have rebuilt and great video. I still have a 4610 SU made Dec. 2 1982 on second shift.
do you happen to know what the setting distance is for the hydraulic system ?
@@martinfidel7086 I do believe it is 3200 lbs don't go over 3500 psl it is a gear pump
@@robertbarlow6715 The distance piece is a tool of a predetermined gauge width
@@robertbarlow6715I bet you forgot more about these fords than I’ll ever learn. Wish I could get in touch with you I’m currently rebuilding a 1970 3000 and a 1973 ford 5000 I need people like you with a wealth of knowledge of these great tractors
Thank you thank you thank you Dan & Company.. you are my schooling
I just bought a Ford 3600 and it works really well. It just needs a new power steering pump, which I;m getting someone who knows a little more than I do to fix it, but I look forward to seeing more of your videos on Ford tractors so I can learn more.
I do not even own a tractor but i really love your video´s
The best of luck to you and your family
Most excellent!! Love the older fords I have a 9600 8600 5000 and a junky T7-270. And a lot of red. Just did the pto and dual power pack in the 9600. The old fords get the work done! Reds always got something little going on and the green....well I only had one and that was enough
Now that was a great video... you guys work great together.... P.S. more bloopers please... Mick, Victoria, Australia
Thank you for being so informative
Hello Dan/Rachel.I really enjoy your videos.I have never committed, just watched them.From your videos I’m very sure that you know your stuff
Dan and Rachel, Iam watching your repair videos. You're very good. I have a 1977 ford 3600
that needs some repairs, electrical and pto.
hey dad, you are so blessed with that girl as your daughter and i hope she gives some thought to how tragically different her life could be but for the simple twist of fate of being given to you and your wife
Great video, well put together.
Great video always a pleasure thank you
I have a Ford 3000Super Dexta here in France ; my favourite tractor , very quick on the road .. I always believed that they were built in Britain , although mine was assembled in Belgium . my hydraulic system is slow ... so now I know what to do ! Thank you !
I’ve the confidence to know I can watch y’all do it!! 😹 Amazing video, they always are!!
What a great job
Great video! Great team!
What a great video! Thank you so much.👍🏼
All I can do is give lot of praise to Father Daughter team and she can talk the talk she has been Taught very very well on her subject , she is a great sale lady. she speaks better than we old men who has bend doing theses things for a half a century are more . great video ready for the next one . stay safe''
My favorite tractor. Mainly because this series of tractor was my first experience but they are just good all around tractors.
Thank you for the help that really did help us out.
Great video. Loved the blooper.
Very nice..God bless you.
From Pakistan.
Thanks very much for this nice to watch and very instructive video. I followed it exactly to repair the pump on my '72 3000. I have just a few remarks for your information:
--In the video at 18:10 you insert the ball cages and remark that the prongs stick out a little bit, then you put the gasket and the plate on. In my case this didn't work, on assembly the plate crushed the ball cages. The Ford manual states that you should put the springs in the housing holes, pose the gasket, then place the 3-pronged ends of the ball cages plus balls in the plate and carefully lower the plate plus inserted balls and cages into the pump housing, onto the springs. I do not know if this problem exists in all 3000's, but in mine the holes in the housing that receive the ball cages are 1mm larger than the bores in the plate, so the protruding ends of the ball cage prongs get caught up under the plate (instead of in the bores in the plate) almost by definition.
--The bearing on the wobble shaft goes on so much easier if you just warm it a bit with a heat gun, it just drops on, almost no hammering required, not even to speak of a press.
Still, my compliments for your work, it is very much appreciated and has helped me gather the courage to start this job myself.
Kind regards and greetings from France!
Easy to follow instructions
Very helpful Great job. Thanks 😊!!
That was a good video Rachel and Dan looking forward to some 70s IH videos if something comes along for you to work on.
Good video
Absolutely fantastic video,💚⚪💛.
great job guys
This is excellent thank you big help
Thank you it help us a lot
Rachel, as young as you look, where in the world did you find the time to become so knowledgeable in what you do? Totally impressed...
That's so nice...some father daughter time.
Great video thank you!
Great video
Beautiful tractor
Keep up the good videos 🤠
Thank you a lot to learn
New subscriber here, very knowledgeable and cute lady, her dad seems pretty cool as well
Just a couple of things. Be generous with the oil when re-assembling, especially with bearings and shaft seals. Pack the Torrington needles as well as the Timken. If you have access to liquid nitrogen, it lessens the danger of hammering bearing cups into place. Also, try the old trick of setting the tapered bearing on a lightbulb for about 10 minutes. They usually drop right on to a lightly oiled shaft. On another note, can you supply sleeve and piston kits for the AD4-203 Perkins as was used in the MF 165? My MF industrial 30 needs a refresh.
Thanks that was very helpful.
Very nice work
A great video !
i bet he is a proud dad thanks for the vids
Very helpful thanks
Very nice video.
Awesome!
Great video. Are you thinking of ever doing the 3 point lift video on how to adjust and rebuild that system? Alot of issues with the hydraulic speed adjuster and 3 point lift but not alot of explanations online and yours are very informative!
First of their videos I've seen with a blooper reel.
That compression fitting she spoke about at 10:30. Was a major pain for me back when we had a 3000. They were $70 each back 40 years ago. At the dealership. Sometimes the line would just pop out. No warning. Pumping all hy fluid out in a matter of seconds. I tried everything. Several new fitting. A new line and fitting. A U bolt hold down set up. It didn't pop out. But develop a leak pretty quick. The final solution was welding a flair fitting to that fitting. Packing removed. Flairing the steel line. Reshaping the line to fit of course. That did hold until we traded it A neighbor had a 3000 also. Same exact problem. I believe Ford had a hugh stock of those fittings. After years of sitting in a wearhouse. The rubber packing in them, broke down. When sold as a replacement part. They wouldn't do the job of holding the line. Our 3000 diesel was a good tractor other than that. However, Ford's inability to devise a update for that problem. ( I even did it) Was the major reason when it came time to replace it.We purchased a John Deere 5300. Never been sorry!
Have the same situation with my 2000 right now, dang thing keeps popping out even after replacing the packing and line. Ended up parking it and bought a Kubota swearing that I will work on it again this summer but not sure I have enough patience as it is a stupid issue.
@@cjselby651 Take a look at these. www.hydraulichoses.com/47208-Flareless-Tube-Compression-Fittings-p/47208.htm Not exactly what I did but close. Cut the body just behind the hex. ( These are meant to couple a tube). Then weld it to that awful ford fitting. Cut the line to fit of course. Throw the packing away. I believe it has a steel sleeve in it to compress around the hydraulic line. That should do it. Unfortunately, as you probably know there is another one of those fittings on the other end of the line. Where it goes into the transmission. It never gave me any trouble. I did change it a couple of times. Trying to fix the pump fitting. Those are pretty pricey. You might find them @ discount hydraulic hose cheaper.
@@rogercarrico4975 Thanks man, awesome idea!
Hi Awesome Michanic professional 👍🍀
v nice job
Nice video
the end was really funn :))))))
I got a pump and rebuild kit waiting on me. It’s my back up and just needs a tad of love and my special tools I got at ford shop in 1965
First show in while love your shows jimmy in alabama
Love the videos. Would love to see a Fordson Dexta live pto clutch replacement.
Hi Rachel & Dan, was watching Rachel rebuild a up draft carburetor. Then this video came on. Elon Musk would die laughing at the design of that ford pump, as I found myself thankful for not own a ford. Great video, Thanks, Charles
Nice, I see the father, with his experience and his education, to be your teacher, Rachel,
You’re awesome!
Very good. Vdo. Thanks
Thanks you good explanations
This is south
korea most korean farmers out of order tractor give up and they buy new tractor because our country surport 8 years pay for money to divide
because fixed information or explain video have no video...
respectively teacher Gingel really good youtuber
thank you again ^^♥
I just did a pump on my Ford this past summer because mine was dumping engine oil. I could not find a shaft for mine without waiting on shipping, I removed my bearing and welded up my shaft and turned it down in the lathe. I replaced the bearing and seal total repair was around $50 pump worked great other than leak so couldn't see rebuilding it.I'd say if you have a machine shop nearby it wouldn't cost much to rebuild the shaft it took me roughly 20-30 minutes to weld it up and turn it down.