Awesome example of craftsmanship and how to do it properly. When you use an electric circular saw, PLACE YOUR HAND AND FINGERS DIRECTLY IN FRONT OF IT. Impressive results follow!
I've always thought about making a boat out of 55 gallon drums but it's to heavy to carry to the lake. The water bottle boat is definitely gonna get made this spring. Lol. Thanks for sharing this video. I loved it!
My friend I was very impressed with the toolbox that you made especially where you put the welding and brazing rods in the legs that was terrific thank you!
You did a very impressive job. The water is not going to be hurt by the little bit of foam you used...some people have to be negative! You did good🎉 0:00
The funny thing is that with these DIY vids, although it's a great idea, they themselves wouldn't be using these creations at all apart from just testing them to make Yt vids.😂 😂😂
@@joewoodchuck3824 Ummm... Impacts, twisting, movement, lack of torsional strength, temperature changes, friction. Need I go on? Cable ties are for cables that don't move, not boats.... Otherwise they'd be called boat ties
This is such a very cool idea especially since I have been wondering what to do with all my water bottles, the summer coming up. I'm near a public lake and I grew up on the water. I will definitely be subscribing so I can watch more of this type stuff.
@@latentspacediffusion You can always ask friends and also look around and find empty 5 Gal. water bottles that are still water tight that can be used for no cost but some time.
It's simple math... water weighs 8.34 pounds/gallon. 5 gallon jug filled weighs 41.7 pounds. So... Empty, it can displace 41.7 pounds of water. Calculate how many pounds the raft needs to hold and still float. Then calculate how many jugs you need to equal that weight. Done!
It's even much simpler if you use SI units. Assuming: Density of water = 1000 kg/m3 (or simply 1kg/Litre) Target carrying capacity = 300 kg standard 5 gallon jug volume in SI units = 18.9 litres Lets first calculate the buoyancy provided by the bottles. Each 18.9-liter bottle can displace 18.9 kg of water, which means it can provide up to 18.9 kg of buoyancy. To support a 300 kg load, the total buoyancy required is 300 kg. calculation procedure: 1. Total buoyancy needed: 300 kg 2. Buoyancy provided by each bottle: 18.9 kg 3. Number of bottles needed: 300kg ÷ 18.9 kg/bottle =15.87 bottles Thus, you need about 16 containers of standard 18.9-liter water dispenser bottles to create a boat that can carry a 300 kg capacity.
It's polyethylene which is quite strong especially in multiple layers as shown here. You can just as easily use a plastic tarp as well.they come in numerous thicknesses and strengths.
What foam are you using and where can you purchase this? This has given me an idea as to where i can fill 3 massive gaps around my apartment, an is it fire proof?
Someone used it at our house before we moved in but forgot to cut off the extra bits that poured out. It's easy enough to do once dry, it's lightweight and easy to cut and sand.
I also like the paddle wheel idea from a bike wheel. I have some just in storage. I just wonder if wider paddles would do a better job. Maybe mount them horizontally instead of vertically.
Depends on the source pricing. The plastic jugs might be decommissioned and no longer suitable for water consumption for example. Probably cheap or free. The plastic pipe frame kayak is very inexpensive even with new pipe. The covering is very cheap. Each design must researched for possibilities.
:33 A friend whose family were spray urathane foam pro's for decades once told me that it was developed by the Germans during WW2, to raise sunken subs. It worked, but the clean up made it impractical.
Looks a better option would be to have some bottles filled with foam instead of having the foam touching the water directly. That or take a sheet of plastic to act as a barrier between the foam and the water.
The water jug one has potential... I would connect all the jugs inside one another to one, make it sturdier..then pump the entire thing up with more air or even helium and lose the foam its un necessary
You missed the point entirely. The foam is being used to stabilize the jugs against moving in relation to each other. Any movement allows flex which can start to weaken the structure.
@@slashhamby4663 May I ask how you would propose to do that? Keeping in mind that any holes below the water line are a leakage risk and polyethylene isn't the easiest plastic to glue.
They could put up what they're using, like what wood or which products! All good ideas for a bit of fun, but if the bottle boat wood got wet would it be ok? Shouldnt he have put something on it to weatherproof it? Great ideas for wasting your time, but fun all the same!
Awesome example of craftsmanship and how to do it properly. When you use an electric circular saw, PLACE YOUR HAND AND FINGERS DIRECTLY IN FRONT OF IT. Impressive results follow!
❤❤
Lunatic ..
Macgyver would be proud. 👏👏👏
You mean Magruber? I have no idea who this macgyver is 🤔
The paddling bicycle is number one for me
Only problem is it can’t turn 😂😂
It seemed to turn from what I saw. Just turn the handlebars.
@@Pushunguis the front wheel acts as front rudder
@@Pushunguis bet , I'll go around the world then
лучше гребной винт а не колесо
I've always thought about making a boat out of 55 gallon drums but it's to heavy to carry to the lake. The water bottle boat is definitely gonna get made this spring. Lol. Thanks for sharing this video. I loved it!
There are plastic barrels to be had for cheap. The lightly used supply is quite abundant and inexpensive.
My friend I was very impressed with the toolbox that you made especially where you put the welding and brazing rods in the legs that was terrific thank you!
... That is one way of doing it , cool idea!!
What a great idea❤❤❤🎉🎉🎉
Nice microplastics added to the environment 👍
That's what I was thinking lol
Say no to plastic!
@latentspacediffusion you phone, tablet or pc is mostly plastic! How will you leave messages here in videos without it
Interesting tree huggers were loving plastic in the 70s and 80s its worked out well
Nobody cares
When they will TEST it, they must wear VEST for thier SAFETY.,maybe they forget saying "SAFETY FIRST".God bless,nice idea.
Perhaps they are confident swimmers.
You did a very impressive job. The water is not going to be hurt by the little bit of foam you used...some people have to be negative! You did good🎉 0:00
Para la próxima, el kajak se puede construir con caños de termofusión o roscados, así se evitan los precintos. Muy buen video
Con ese kajak hay algo raro. No se muestra como selló las puntas. Hay gato encerrado.
Well done on your idea with the water bottles
The funny thing is that with these DIY vids, although it's a great idea, they themselves wouldn't be using these creations at all apart from just testing them to make Yt vids.😂 😂😂
I wish I would have seen something like this when I was a kid, and had little money but lots of time on my hands.😂
I'll keep this in mind for survival when I'm stranded on the desert isle because I know for sure there will be a ton of plastic already there!
4:00 I would suggest using bubble wrap or after the cling wrap use a good paint or something, I could help you in your next project
Показано верно! Гайка должна закручиваться пассатижами!
Отличные девайсы, очень хорошо выполнена работа🤩🤩🤩
прикольно
Very original, good working ideas. Bravo, bravo masters!
I bet all the birds and fish are gonna love having gallons of spray foam in their habitat
So cool!
That's a brilliant idea, I love it.
Adorei a bike no final, muito legal 😀
Best bottle boat I've Seen I remember helping to build one back in the day when I was in the scouts
You lost me when you started spraying foam 🤦🏾♂️
The foam helps to stabilize the jugs so that they don't move around and weaken the structure.
@@joewoodchuck3824 it also cracks under load and emits foam crumbs into the water. It'd be better to use rope for stabilization.
@@rhoshard I see your point.
Wat a legend thats wicked.paint and waterproof the timber last for evs 👌
Kayak amazing!!!👍
Nice invention , it'll make the crocs happier 🤣
Cool projects
👍🏴😁✌️
Love people using thair Brain Thinking Outside The
□■□■'s🤜🏻🤛🏻🕶👍🏻Awesome
Cable ties are truly indestructible. Cling film too. I can't see any potential problems here 🤔
Hope shes a good swimmer 😂
Cable ties are wonderful as long as the UV resistant black ones are used. White ones break down in sunlight.
@@joewoodchuck3824
I don't think sunlight is the main issue tbh 😬
@@blame681 What is the issue then in your opinion?
@@joewoodchuck3824
Ummm... Impacts, twisting, movement, lack of torsional strength, temperature changes, friction. Need I go on? Cable ties are for cables that don't move, not boats.... Otherwise they'd be called boat ties
Nothing like running a rip saw towards your hands
Scary stuff
Great build though
Интересно было бы глянуть на ситуацию когда шуруповерт разрядился по середине водоёма
This is such a very cool idea especially since I have been wondering what to do with all my water bottles, the summer coming up. I'm near a public lake and I grew up on the water. I will definitely be subscribing so I can watch more of this type stuff.
Nice idea, but you can buy a used rowboat for a couple hundred dollars. It's not like they are giving water jugs and lumber away
Water jugs and lumber is way less a couple hundred bucks!
@@3EASTthose 5 gal bottles are like $20 each if you had to buy them.
@@latentspacediffusion You can always ask friends and also look around and find empty 5 Gal. water bottles that are still water tight that can be used for no cost but some time.
Loved the water bike.
It's simple math... water weighs 8.34 pounds/gallon. 5 gallon jug filled weighs 41.7 pounds. So... Empty, it can displace 41.7 pounds of water. Calculate how many pounds the raft needs to hold and still float. Then calculate how many jugs you need to equal that weight. Done!
It's even much simpler if you use SI units.
Assuming:
Density of water = 1000 kg/m3 (or simply 1kg/Litre)
Target carrying capacity = 300 kg
standard 5 gallon jug volume in SI units = 18.9 litres
Lets first calculate the buoyancy provided by the bottles.
Each 18.9-liter bottle can displace 18.9 kg of water, which means it can provide up to 18.9 kg of buoyancy. To support a 300 kg load, the total buoyancy required is 300 kg.
calculation procedure:
1. Total buoyancy needed: 300 kg
2. Buoyancy provided by each bottle: 18.9 kg
3. Number of bottles needed: 300kg ÷ 18.9 kg/bottle =15.87 bottles
Thus, you need about 16 containers of standard 18.9-liter water dispenser bottles to create a boat that can carry a 300 kg capacity.
Absolutely brilliant.
Thank you 🙏 great 👍 inventing 👏👏👏please keep it up ☝️you needed for the future 🌎👋☮️
فكره رائ❤🎉Great idea, very important for Monday, I love this ع احب هذا مهم جدا الاثنين حرة فلسطين
The last one is really cool!
If you use the clear plastic wrap for your boat without the glue as shown, how to avoid the water leakage into your boat ?
I enjoyed the video and i subscribed 💯👍
Wow is really amazing 👏 😍 👌 🙌 ❤️
Very clever. Dont think much of the celephane boat strenght though..
It's polyethylene which is quite strong especially in multiple layers as shown here. You can just as easily use a plastic tarp as well.they come in numerous thicknesses and strengths.
Good invention..
интересная лодка вышла у девушки, там так много мест куда протечёт вода, от середины озера она будет плыть уже без лодки😄
❤❤❤amaezing🥰❤❤❤
Buenísimas ideas y construcciones saludos del gordito desde El Salvador 👍😊💯
What foam are you using and where can you purchase this? This has given me an idea as to where i can fill 3 massive gaps around my apartment, an is it fire proof?
Self expanding foam. Can get it at any hardware shop.
Someone used it at our house before we moved in but forgot to cut off the extra bits that poured out. It's easy enough to do once dry, it's lightweight and easy to cut and sand.
Thank you for gettin back with answered question, most helpful, will go to the diy hardware store, keep your ideas coming,
Wouldn't filling the pvc with foam just weigh it down more?
It's to stop the tubes filling with water and being even heavier than the weight of the foam.
The miniscule added weight is cheap insurance against water leaks.
Amazing work
I like the bike
I also like the paddle wheel idea from a bike wheel. I have some just in storage. I just wonder if wider paddles would do a better job. Maybe mount them horizontally instead of vertically.
To finish the canoe you should have used fiberglass and resin for the hull. Nice idea. The bike is a great idea. The foam pontoon. Well, it's an idea.
That's a nice idea but then it wouldn't be a cheap death trap
Давно мечтал о таком водном веле. Будет, чем заняться на даче. Только сзади еще прицепить плавучий плот и с него рыбачить
How does he come up with these ideas? Great innovation.
This is what gets the hot chicks ...
we need more plastics in our lakes and oceans 😂😂
How is any plastic being added to the water?
@@joewoodchuck3824 The spray foam will dissolve at the micro level and leach out slowly.
@@OverkilledUnderdog Ok. I wasn't sure. But is it actually harmful in some way? I was thinking it would be benign.
dunno the water bottle one I can see working... the cling wrap one? water will seep in sooner or later.
Super nápady ‼️👍
Amazing 😳 ❤️
This get the chickas
Very good.thanks you
The idea is good without all these unnecessary plastics. Everything can be done with wood and cord. Besides all these pipes are not specially cheap !
For the price it takes to build these you could buy a good used boat
You do what you like and others do what they like. Further, you don't actually know what prices were paid.
Couldn't go on my bodies of water.... Looks like a pool float
Байдарка просто класс!!!! Как говориться из "гов..а и палок" УМНИЦА!!!! РЕСПЕКТ!
Из г-на и палок - у адвоката Егорова. А здесь каркас как чугунный мост
Doest this cost the same as a real boat after cost of materials?
Depends on the source pricing. The plastic jugs might be decommissioned and no longer suitable for water consumption for example. Probably cheap or free. The plastic pipe frame kayak is very inexpensive even with new pipe. The covering is very cheap.
Each design must researched for possibilities.
Excelente,♥️🌈👍👽
Thanks for sharing. ... 謝謝分享，南無阿彌陀佛。
Love it!
Well done
You should have put empty soda bottles in the bow and stern of the kayak. If you swamp it, now it’s just a bunch of plastic at the bottom of the lake.
3:30 надо было растяжки и к корню дерева делать, что бы его не крутило.
Should have left caps on bottles
The fact that she knows how useful PVC and zip ties are.. yes!
Her project was entirely too complicated...
@@urrywest different strokes for different folks
Nice velo 👍
Good job
:33 A friend whose family were spray urathane foam pro's for decades once told me that it was developed by the Germans during WW2, to raise sunken subs. It worked, but the clean up made it impractical.
Yes that foam is very expensive
Yes it is. You could substitute something else
As long as I'm on earth, no matter what's going on, being in my presents guarantees you'll be OK. I'm the good guy
Presence.
Or 🎁 presents 🌼
If you just use the water bottles it also works..... No need for the foam .... Just destroying the water environment with it :(
You're 100% correct that's exactly what I thought the moment I seen the video
@somerandomname9252 LOL, he should have hand-painted the bottles to get some extra time.
Everyone s a fkin expert not he made the craft extra strong,,good job mate,❤ it very portable😂
@@arjan-nuts-gamingdetractors making me nauseated
@@briangillie3873 well intentions liberals the systematic destruction of the world through a kind heart
Looks a better option would be to have some bottles filled with foam instead of having the foam touching the water directly.
That or take a sheet of plastic to act as a barrier between the foam and the water.
very good
На велике вместо переднего колеса направляющий плавник нужно было приварить!!!
flycam is awesome
Супер 💣 Класс 🔥
Appalachian Know how at its best... and with POWER TOOLS!!!😂😂😂
brilliant.
Прикольно!👍
That canoe was a big joke😂😂
Велосипед - класс 👍
Maybe foam IN the bottles might work better.
So more land fill then
But will come in handy
Why not go all out and create a propella system for the bike, would be much more effective
That kayak is going to smell something fierce..
Здорово!!!
The water jug one has potential... I would connect all the jugs inside one another to one, make it sturdier..then pump the entire thing up with more air or even helium and lose the foam its un necessary
You missed the point entirely. The foam is being used to stabilize the jugs against moving in relation to each other. Any movement allows flex which can start to weaken the structure.
@@joewoodchuck3824 That's why I said interlock them together
@@slashhamby4663 May I ask how you would propose to do that? Keeping in mind that any holes below the water line are a leakage risk and polyethylene isn't the easiest plastic to glue.
O projeto é totalmente dela 🤔😁
They could put up what they're using, like what wood or which products!
All good ideas for a bit of fun, but if the bottle boat wood got wet would it be ok? Shouldnt he have put something on it to weatherproof it?
Great ideas for wasting your time, but fun all the same!
what kind of welder is that? (Asking for a friend ;)
Just make sure you know how to swim... just in case...😂
If anything you could Mcgiver something in a survival situation with zip ties!