Part 1/3 of the VKB Gladiator NXT: ruclips.net/video/xYRt8KFscOw/видео.html EVO Series & Omni Throttle: ruclips.net/video/QQALuWPq8SE/видео.html Deutsches Video: ruclips.net/video/VBW2kcGLc4w/видео.html
This is great, I can see where the virtual mouse would comin handy inside ships. Would love to see the omni throttle. After trying my friend's Virpil HOSAS setup I am now committed, adds a whole new level of fun to SC.
I just ordered a set of the Omni sticks and these guides have me really hyped and actually prepared to jump into the software. I don’t feel as intimidated by the setup.
Solid video, makes this complicated software look easy to use, tho if you want the thumbstick to behave more like a normal game controller's stick, while in the POVs tab, set the DZ to a low number, 4 seems to be lowest it goes to, and change the DZ type to circle. Changing these settings makes the deadzone a tiny circle at the stick's center-point, instead of a wide cross separating 4 quadrants of control, which is how the base settings translate from the hat to the stick.
Hi I have a quick question, I have tried to set this up on my VKS's, but mine is active when the red light is off and not active when the red light is on, any way to switch this round?
This is not necessary with the new evos, as they have newer firmware than can be downloaded. Depending on the version of your stick, it may be worth it 👍
I followed your instructions but for some reason it makes the mouse turn on when the red LED is off. I still have the X and Y rotation when the mouse is off.
Wish I could find a guide that explained how to make the a1 stick push button switch between two separate "sticks" instead of mouse/stick and disabled/stick... Or if that's even possible
I followed your directions but now my right joystick doesn't recognize pitch/yaw. The virtual mouse works but I'm never able to use it to control the ship, even after I deactivate the virtual mouse. Do you know how to fix this?
i dont know what im missing and confused i try and setup the mouse ministick and the profile is just blank? any idea why i can see it working when i go into test
Do you know how I can swap the axis on the ministick virutal mouse, so that X controls vertical mouse movement and y controls horizontal? I'm trying to get the virtual mouse set up on my omnithrottle left stick, but since the stick is tilted on its side towards the right, the "up" direction in reality corresponds to the "left" in the software, etc.
setting the right stick's joystick to mouse caused the device config to be unable to edit the controller, and then it outright stopped showing up in the config as a device. EDIT: Restarting the config software worked.
the fixing of the axes is currently only possible for the lateral axes with the plate. However, even without axle fixation, you can turn any axle into a throttle by removing the spring and adjusting the resistance 🤞
I have a similar--ish issue. When I follow the steps it's flipped where when the red LED is off, it's mouse mode, and then when I click for mode switch then it becomes the normal stick/hat function.
Which country are you from? At first I thought you were a native English speaker, but then I recognized you are not, through your accent and how you pronounced some words wrong.
Part 1/3 of the VKB Gladiator NXT: ruclips.net/video/xYRt8KFscOw/видео.html
EVO Series & Omni Throttle: ruclips.net/video/QQALuWPq8SE/видео.html
Deutsches Video: ruclips.net/video/VBW2kcGLc4w/видео.html
This is great, I can see where the virtual mouse would comin handy inside ships. Would love to see the omni throttle. After trying my friend's Virpil HOSAS setup I am now committed, adds a whole new level of fun to SC.
Yes, I'm also looking forward to it 🤩
This series has been a massive help for me, thanks man!
You're welcome 🥳
those 3 videos are gems. professional, clear and awesome. thanks alot !!!!
Hey thank you 😄🤩
Great video! Stick showed up today. Need part three!! Hehehe. Keep up the great content.
the third part is already in progress 😁😁😁
I just ordered a set of the Omni sticks and these guides have me really hyped and actually prepared to jump into the software. I don’t feel as intimidated by the setup.
nice to read that it could help 🤗
Used this tutorial today. Thanks for making it!
You're welcome 🤗
great review! Certainly sold it to me for SC.
Thank you Magnus 🤩
Great tutorials. Looking forward to part 3.
Thx 😁
Solid video, makes this complicated software look easy to use, tho if you want the thumbstick to behave more like a normal game controller's stick, while in the POVs tab, set the DZ to a low number, 4 seems to be lowest it goes to, and change the DZ type to circle.
Changing these settings makes the deadzone a tiny circle at the stick's center-point, instead of a wide cross separating 4 quadrants of control, which is how the base settings translate from the hat to the stick.
Thanks for the tip 🚀🚀🚀
Well done. Your give us good info
Thank you 🤩
Really nice information.
Thank you
You're welcome 🤩
Hi I have a quick question, I have tried to set this up on my VKS's, but mine is active when the red light is off and not active when the red light is on, any way to switch this round?
this can be changed, albeit with considerable effort via led programming 🤞
so many settings ,great tutorial
Thank you 🤩
good info just got mine this monday
have fun with it 👍🤩
Vkb recoment not flashing a new stick so I'm confused on whether to do this or not
This is not necessary with the new evos, as they have newer firmware than can be downloaded. Depending on the version of your stick, it may be worth it 👍
hi. nice trick with this virtual mouse. I wonder how it will work in SC. Awaiting 3rd part. cheers
Thank you 🤩 it works surprisingly well
I followed your instructions but for some reason it makes the mouse turn on when the red LED is off. I still have the X and Y rotation when the mouse is off.
Feel free to stop by our Discord and we'll troubleshoot :)
Wish I could find a guide that explained how to make the a1 stick push button switch between two separate "sticks" instead of mouse/stick and disabled/stick... Or if that's even possible
this is possible but involves some effort in the bkb software 🤞 I've put it on my todo list
I followed your directions but now my right joystick doesn't recognize pitch/yaw. The virtual mouse works but I'm never able to use it to control the ship, even after I deactivate the virtual mouse. Do you know how to fix this?
do you have problems with pitch yaw in the game? check whether the sticks are mixed up in the game, that happens again and again 🤞
Thank you for this video!
You're welcome Jeremy 🤩
i dont know what im missing and confused i try and setup the mouse ministick and the profile is just blank? any idea why i can see it working when i go into test
we would have to look at the settings step by step. feel free to join us in discord 🤞
Do you know how I can swap the axis on the ministick virutal mouse, so that X controls vertical mouse movement and y controls horizontal? I'm trying to get the virtual mouse set up on my omnithrottle left stick, but since the stick is tilted on its side towards the right, the "up" direction in reality corresponds to the "left" in the software, etc.
you can change or invert almost all functions via the game itself. Most areas can also be set using the vkb software 🤞
What about a DCS config. I want to use my left hand angled stick as a throttle but can't find how to do it. HELP!!!!!
Feel free to drop by our discord, we also have some dcs players 🤞
@@MrKarolinger Thank-you!! Have a wonderful day!
I can get the mouse feature to work in game. Driving me nuts
feel free to drop by our discord. then we can take a closer look 👍
Hallo Karo, ist der VKB Gladiator NXT Omni bei dir auf der Review-Liste?
Auf jeden Fall 👍 Sobald ich die Möglichkeit dazu habe gibt's ein Review dazu
@@MrKarolinger mega, ergonomisch soll der ja besser sein laut vkb ... wenn man ein HOSAS Setup verwendet...
setting the right stick's joystick to mouse caused the device config to be unable to edit the controller, and then it outright stopped showing up in the config as a device. EDIT: Restarting the config software worked.
🖖👍
thanks :)
6:45 i have no options in Basic and no ability to enable Mouse here with my new Gladiator NXT Evo. Thanks for this guide. This software is horrifying.
yes the software is very powerful but not very user friendly 🤞
Is it possible to set actual X and Y axis as virtual mouse instead of pow switch?
this can also be done with the software🤞
@@MrKarolinger it is definitely rocket science for me since I'm quite new to VKB configurator :)
mine only activates mouse mode the opposite way if yours (when the red light is off)
you can program the led separately 🤞
Yeah, same. And in game, It is either mouse mode or nothing. Cannot toggle the hat for anything else.
confuse!! there is other options in my software and also in the flash.. need to update it.
the basic functions are still the same. if you need help, feel free to drop by our discord 🤩
I was wondering if I could put the X and y axis for a throttle , instead of pitch and yaw would anyone know how to do that ? Many thanks!
the fixing of the axes is currently only possible for the lateral axes with the plate. However, even without axle fixation, you can turn any axle into a throttle by removing the spring and adjusting the resistance 🤞
Virtual mouse is very handy, and saves a lot of annoying switching.
it's actually nicer than expected 😁
Find and auto config button isnt there for me
The software has received an update and the auto config is automated 👌
@@MrKarolinger thank you sir!!!
I would love to build a little cockpit simulator. I need to retire so that I will have more time to play Star Citizen.
I can understand that very well 😁
for some reason the mouse mode switch isn't switching the led stays on
Okay i reverted to default settings and plugged the joystick into another usb port afterwards. tried again with the settings all good now
I have a similar--ish issue. When I follow the steps it's flipped where when the red LED is off, it's mouse mode, and then when I click for mode switch then it becomes the normal stick/hat function.
Depending on the port used, you may have to repeat it until the function is active 🤞👍
I didn't think it was so complex to configure
I'm surprised how much you can configure and customize 😁
Does not work.
Feel free to join us in the discord 👌
Which country are you from? At first I thought you were a native English speaker, but then I recognized you are not, through your accent and how you pronounced some words wrong.
Thanks very much. I'm German 😁
The mouse function isnt working
Feel free to drop by our discord, we can help you to find the error 👍