I'm a auto detailer and the best thing for that plastic is 303 protectant because it has uv protectant in it it helps from fading and makes the plastics shine as good as new..
15 min video 4-5 hours washing Canam looks new… priceless I haven’t had my canam look that good for a while. Might have to giver the osta spit shine. Thanks for he video.
Wow! I can’t believe what a great job that pre - soak mixture did and it wasn’t even rinsed yet. Amazing stuff! You’ve gotta be just stoked about your new digs. It looks beautiful up there.
Great video! I use the AMSOIL brand "Mud Slinger". I put it on before I ride, and when I wash the machine, the dirt just falls off! After it dries, I spray it again and it makes the machine look new! About $10.50/per 12 oz can retail. I have never used a foam wand, but looks like I need one!
Just some personal tips for someone who runs a detailing business..use a blower even while it's running you want to get all residual moisture out from everywhere inside out finish with a spray on wipe off wax and Vitalizer for all rubber and plastic accents/tires it helps with future cleans when it comes to the mud sticking to the machine
When it comes to drying the machine off that is. Using a blower for any detailing is a no go unless it's to remove standing moisture and prevent drips as well as assure a 100% moisture free standing. Usually I wouldn't take water directly to the console or your speakers but a light rinse off before you hand clean shouldn't hurt . And the more water you use with high pressure the odds of decals peeling away sooner. These gas powered cleaners are ment for machinery and equipment as well as paint stripping. You shouldn't need more than 2gpm and you def don't need pressure that will tear through sensitive materials..your equipment wash should loosen up all dirt mud etc that a nice light soft wash should do the trick and prevent any potential issues and increase longevity in your machines cosmetic appearance
Thabks dude. Haven't had a single issues using large gas pressure washer for over 18 years on them. Just have to know how to use them. Great tips though. Thanks
I like to remove seats to wash all the interior and seats.for drying i use a leaf blower with engine running.super clean inthink is to caustic,i prefer to mix simple green with the laundry soap,and i also use slicon tire shine everywhee, the radiator use nu-calgon nu-brite,nice job.
Every time before I go I spray my four wheeler down with simple green. It dries in few minutes and when it’s time to wash it after a day of dirt, it comes right off! The simple green gets wet and just washes right off.
Nice finishing shots Dave, I use the SC1 that you recommended a while back. A little pricey but Wow! makes the ride shine like new. "Ride Hard and Be Safe" MN Bill
Took 5 hours to get my machine completely clean after frcc. I was in that deep soupy mud for a long time and it got into every nook and cranny my muffler was even plugged full of it. Then i had to do it again the following weekend because i wen and raced in a clay mudpit lol.
I've only gotten my 950 that muddy a couple times. It's a great amount of work to get it back to looking nice again. I definitely try not to get into mud like that anymore. Lol. Thanks for sharing bro.
Best tip i have for washing mud bogg rigs is putting a sprinkler that sprays a fan pattern out under the rig and let it go for awhile then come back and it all falls right off.
Tire foam is where it's at. I by the cheap Simoniz on sale at Crappy Tire and get 2-3 washes out of it on my XMR1000. Looks like new and I find the water and mud on "light rides" bead off of it like you waxed it and it definitely makes it easier to clean the next time.
Thanks for the tips, I was using tire foam on my tires today wondering how I could get the black plastics to look better 😂 I know what I’ll be trying tomorrow
I’ve found that simple green all purpose cleaner works great it’s biodegradable and it’s safe on you plastics I usually get the concentrate and dilute it 1 part water and 1 part simple green concentrate
Dually update...... House update...... what's next, can't wait. At least you knew better than to wash it in the wash bay. Mrs. O would kill you! Absolute LEGEND!
Very nice detailed video! You guys should use Chemicals guys product there are feicking amazing plus they have soap made for mudding keep your plastic nice and protected! All support from quebec canada keep up the great content!
Would the super clean with the 50 50 mix with the detergent be bad or dull new plastic as we have a new X3 ready for pick up next week and want to get the stuff ready, not that we’ll be that muddy
You should build a wash bay in your shop - LOL - JKOC - when is that scheduled for completion? PS: Hard to believe how dry the Garden is. Literally zero flow when we crossed it last Monday.
much better use of time would be to put a sprinkler on it for like 10 mins per side.. and then use something like the honeydew snow foam from chemical guys or mega foam from adams. i would then put a topper on the exterior plastics to help increase the slickness to reduce mud from sticking in the future.. turtle wax ice spray wax, hybrid solutions ceramic spray coating, or the their new graphene flex wax. Mequires hybrid ceramic or the last coat 2.0 would also work nicely. These coatings also will not attract dust, which laundry detergent is notoriously bad at.
@@ostacruiser man the way you did it was legit...I've been doing this for 20 yrs and there's really no better way than the way you done it other than actually putting your hands with a brush or a rag. Nothing beats the old "elbow grease". 💪
Keep it out the weather and spray everything with oil every now and then and wipe it down. I use wd 40 most of the time. Ill spray my bearings springs and any pivot point. Let it sit for about 30 mins and wipe any excess. Boiled linseed oil for plastics.
The laundry soap works well because the mud is acidic and the soap is alkaline (base). Honestly, you should just spend the $100 to ceramic coat the whole thing and mud won't even stick to it.
Great looking machine you got there. Tons of money wrapped up in that thing too I see. And I know that garage and truck aren't cheap either. I want all of that one day as well. Just curious as to what you do for a living to afford everything??
@@ostacruiser Yeah me too. Just want the big boy toys as well. Come on man what do you do for a living? I'm looking for a career change that will let me have what you have.
@@ostacruiser Thanks. I use SC1 now, but it is very expensive and it takes a lot to do my quad ,and I also use it on my zero turn mower to make it easier to clean after I cut the grass. Makes the underside of the deck much easier to clean too. Now I have other products to try.
Hi Do you need some great lighting upgrade for your car to help you better driving, off-road and adventure.We're the pro auto lighting manufacturer for nearly 20 year and we're looking for sponsorship!
I'm a auto detailer and the best thing for that plastic is 303 protectant because it has uv protectant in it it helps from fading and makes the plastics shine as good as new..
Muc off is better
Is it bad to pressure wash it around the wheel well. Will it cause damage
Does that spray rust metal?
Im highly impressed that the soap + degreaser did 75% of the work just soaking in. great video!
15 min video 4-5 hours washing
Canam looks new… priceless
I haven’t had my canam look that good for a while. Might have to giver the osta spit shine. Thanks for he video.
Wow! I can’t believe what a great job that pre - soak mixture did and it wasn’t even rinsed yet. Amazing stuff! You’ve gotta be just stoked about your new digs. It looks beautiful up there.
Thank you. Yes for sure
We have the same mud here in norther Alberta . Couple hours of fun costs 4 hours of cleaning . All a part of the fun 👍.. nice presentation 👍
Tanks man i have been washing rigs for 15 years and i learn one thing listening to your video....and that one thing change my life.....
Maxima SC1 is the best finish spray by far, not cheap but worth every penny. And it smells amazing 🤩
thanks for the tips!. spent 4h washing my renegade after frcc. i think putting on the soap before would have been a good idea lol
Sorry bud but this isn’t farm sim
@@mnfarmboys4044 he has a renegade irl
I watch him. @@prestonjones2446 it’s just a joke chill your tits
Make a vid of it please
Great video! I use the AMSOIL brand "Mud Slinger". I put it on before I ride, and when I wash the machine, the dirt just falls off! After it dries, I spray it again and it makes the machine look new! About $10.50/per 12 oz can retail.
I have never used a foam wand, but looks like I need one!
Just some personal tips for someone who runs a detailing business..use a blower even while it's running you want to get all residual moisture out from everywhere inside out finish with a spray on wipe off wax and Vitalizer for all rubber and plastic accents/tires it helps with future cleans when it comes to the mud sticking to the machine
When it comes to drying the machine off that is. Using a blower for any detailing is a no go unless it's to remove standing moisture and prevent drips as well as assure a 100% moisture free standing. Usually I wouldn't take water directly to the console or your speakers but a light rinse off before you hand clean shouldn't hurt . And the more water you use with high pressure the odds of decals peeling away sooner. These gas powered cleaners are ment for machinery and equipment as well as paint stripping. You shouldn't need more than 2gpm and you def don't need pressure that will tear through sensitive materials..your equipment wash should loosen up all dirt mud etc that a nice light soft wash should do the trick and prevent any potential issues and increase longevity in your machines cosmetic appearance
Thabks dude. Haven't had a single issues using large gas pressure washer for over 18 years on them. Just have to know how to use them. Great tips though. Thanks
I like to remove seats to wash all the interior and seats.for drying i use a leaf blower with engine running.super clean inthink is to caustic,i prefer to mix simple green with the laundry soap,and i also use slicon tire shine everywhee, the radiator use nu-calgon nu-brite,nice job.
When you use this mix, do you need to scrub, too? Or no scrubbing needed?
Every time before I go I spray my four wheeler down with simple green. It dries in few minutes and when it’s time to wash it after a day of dirt, it comes right off! The simple green gets wet and just washes right off.
Nice finishing shots Dave, I use the SC1 that you recommended a while back. A little pricey but Wow! makes the ride shine like new. "Ride Hard and Be Safe" MN Bill
Works incredible. Thanks
I also use sc1. True it's a little pricey but if you buy a case of 8 or 12, almost goes down to $6 per can. (Amazon)
I like to run my sprinkler underneath my sxs for a good while I find all the clumps stuck in the deeper areas seem to wash out much easier.
Wow you are a genius. Why have I not thought of that 😂
@@nickunknown5111 I cannot take credit. I seen my neighbour doing that with his work truck. So I stole the idea for my sxs hehe.
Took 5 hours to get my machine completely clean after frcc. I was in that deep soupy mud for a long time and it got into every nook and cranny my muffler was even plugged full of it. Then i had to do it again the following weekend because i wen and raced in a clay mudpit lol.
I've only gotten my 950 that muddy a couple times. It's a great amount of work to get it back to looking nice again. I definitely try not to get into mud like that anymore. Lol. Thanks for sharing bro.
That's the fun in riding! Mine looks nearly that bad every time I ride (just trails)
Red shale or something around the shop would be a nice touch either way the place looks good! 🤘
Best tip i have for washing mud bogg rigs is putting a sprinkler that sprays a fan pattern out under the rig and let it go for awhile then come back and it all falls right off.
Tire foam is where it's at. I by the cheap Simoniz on sale at Crappy Tire and get 2-3 washes out of it on my XMR1000. Looks like new and I find the water and mud on "light rides" bead off of it like you waxed it and it definitely makes it easier to clean the next time.
100% agree. It works better then any other brand I have tried
Awesome. I've always wondered how you keep all those toys looking brand new. Thanks
Thx for the tips. I’ll be putting them to the test soon. I just bought my first side by side can am defender xmr.
Great vid, I clean mine back to new after every ride as well, I finish with good ol tire foam, like you said cover everything with it👌
❤❤
@@ostacruiser Are you wiping it down after you spray the tire foam on? Or just let it sit?
@@mikepaulson6154 wipe it. It gets rid of the streaks if there are any
Nice tips. I have noticed that my machine comes clean easier after putting on a wrap too. Stuff doesn't stick to it as much
I agree 100%
I like that you're not trying to sell us the top of the line products
Ya man I grab what ever is on sale lol
Here we gooooo for osta 🔥💯🔥😍😍😍😍
👌👌👍👍
@13:54 Grasshopper is all shiny too and wants to be part of this Video...
738K users will see you... Way to go!!! :-)
Haha little guy was in to win!
A day in the mud a day and a day cleaning ! 👍
Saweet. Going to have to clean the wheeler now
Your vids are always so enjoyable! Thanks for all the tips.
Machine looks great! but man! your property is badass!🤘
Thank you brother
Thanks for the tips, I was using tire foam on my tires today wondering how I could get the black plastics to look better 😂 I know what I’ll be trying tomorrow
ruclips.net/user/shortsiYFZuuVAeNY
I’ve found that simple green all purpose cleaner works great it’s biodegradable and it’s safe on you plastics I usually get the concentrate and dilute it 1 part water and 1 part simple green concentrate
Dam ghost looks awesome freshly cleaned hey 😁🤘
That wheel and tire combo looks awesome on the X3! Might have to order some for mine. 🔥🤘🏻😎
Thanks. You will absolutely love how they perform on the trail as well
Did you wipe off the tire shine spray after it dried or before? Or not at all?
Lemon pledge works great!
Affer you spray the tire foam, do you rub it in or just leave it
Spray nine works great as well
Guess I know what I am trying next, laundry soap and superclean! That turned out unreal!
You live at a very beautiful and peaceful place there. 😍
We are very lucky
So Agee about the sun going down or early. Hate the winter here in iowa.
Looks fresh man!
Great video as always 😊👍🌹
Thank you!!
When washing the the inside floor remove the pressure washer tip.. or use water hose to flush floor no splash
I'm gonna half to try this on my quad
Glad I live by the sand dunes looks like a lot of work and probably hard on your machine but dam it works good
Hay what size tires are u running I’m waiting on a 22 xmr rr and do u need to lift or adjust springs tks
Always use a water hose first to wash off the big that way your not blowing it side to side then pressure wash is what I found to work best
No kidding! Best way to get the bulk off.
Throwback to the og renegade wash video
Heck ya buddy!!
Good video as usual. 👍
When will you give us a demonstration of your new car wash bay??
As soon as we are finished lol
Great video. Thank you.
Have you ever pre-sprayed your wheelers down with Rainex before getting muddy? Works great for me.
Dually update...... House update...... what's next, can't wait. At least you knew better than to wash it in the wash bay. Mrs. O would kill you! Absolute LEGEND!
Will the seats get mold getting soaked ?
Never had an issue in 17 years
Very nice detailed video! You guys should use Chemicals guys product there are feicking amazing plus they have soap made for mudding keep your plastic nice and protected! All support from quebec canada keep up the great content!
Would the super clean with the 50 50 mix with the detergent be bad or dull new plastic as we have a new X3 ready for pick up next week and want to get the stuff ready, not that we’ll be that muddy
No it doesn't affect it at all. It only stays on a short while before it is rinsed off
@@ostacruiser copy that thank you
This vid was pretty helpful
Was wondering if you used anything like Creacoat ceramic coating to prevent dirt from sticking and keeping it clean?
I haven't tried those no
After the tire foam do you wipe or rinse it ? Or just let it dry ?
I usually give it a quick wipe down
Wipe , but he left that critical part out. If you just spray tire shine and dont wipe it, it will look terrible...
What’s the best pressure washer to get
is there a lift on your x3 or did you adjust the ride height? alot of them sit low that ive seen. I love the stance on it.
No lift just a bit of suspension preload added
Love your videos man
Do you leave it idling when you spray it down?
No but I start it up near the end of the wash and let it get warm to dry the motor
You should build a wash bay in your shop - LOL - JKOC - when is that scheduled for completion?
PS: Hard to believe how dry the Garden is. Literally zero flow when we crossed it last Monday.
Definitely! Hopefully done the wash bay this fall
Totally Awesome works well as well!
And it's at the dollar 💵 store
My honda talon is a pain in the ass to clean. It gets so much mud on it, prbly over 100 pounds easily. Florida mud is heavy.
Spray it down with some all purpose cleaner in a pump sprayer meguiras is pretty cheap and you can dilute it.
These videos are sick
Red shale or something around the shop would be a nice touch either way the place looks good! 🤘
Daamn,that creek is soo dryit has 0 floatege now.
DO i see there a new trail?
So dry! Lol
5 minutes into the video before I remembered Osta has a carwash bay! lol what re you doing outside Dave??
Better for all that mud to fall on the ground and mud spraying everywhere,its Just easier to do it outside so your not cleaning the wash bay after too
We are also not quite finished yet. Hopefully soon
Sc1 is awesome 👌
Are they 34s
Yes
Jug of Purple power and put it into a spray jug that you’d spray round up with
Don't give our secrets away... lol
The tires and wheels what size? Thx
34 in tires
What kind of tire foam?
I have the best luck with Simoniz
Wow Osta, your river has really dried up!
Crazy. We need rain!
Is there any places you DONT want to hit with a pressure washer?
Just try not to get too close around the engine and radiator
BOOTY JUICE...Is the concoctions you just made...
much better use of time would be to put a sprinkler on it for like 10 mins per side.. and then use something like the honeydew snow foam from chemical guys or mega foam from adams. i would then put a topper on the exterior plastics to help increase the slickness to reduce mud from sticking in the future.. turtle wax ice spray wax, hybrid solutions ceramic spray coating, or the their new graphene flex wax. Mequires hybrid ceramic or the last coat 2.0 would also work nicely. These coatings also will not attract dust, which laundry detergent is notoriously bad at.
Everyone will have their opinion for sure. Thanks for sharing
You are a complete slow leak if really believe wtf you just said....D.A!! 🤣🤣
@@ostacruiser man the way you did it was legit...I've been doing this for 20 yrs and there's really no better way than the way you done it other than actually putting your hands with a brush or a rag. Nothing beats the old "elbow grease". 💪
HOW DO YOU KEEP THE METAL FROM RUSTING
Keep it out the weather and spray everything with oil every now and then and wipe it down. I use wd 40 most of the time. Ill spray my bearings springs and any pivot point. Let it sit for about 30 mins and wipe any excess. Boiled linseed oil for plastics.
I’m a believer in SC1
Really good stuff
What doors are those
Trailer queen it best way to keep it clean 😉
I don't get it
@@ostacruiser the folks who never or rarely ride and also keep them out of the mud them never have to clean them 😂 I'm not one of them thankgod.
@@ChippyOutdoors ah gotcha 😅😅
The laundry soap works well because the mud is acidic and the soap is alkaline (base).
Honestly, you should just spend the $100 to ceramic coat the whole thing and mud won't even stick to it.
where is your sherp n ostacruiser .
She's getting some sweet upgrades right now. Video coming soon
Try wr performance total wash
Is that a backup camera/rear view mirror screen combo? Do you have a build list for this machine?
Great looking machine you got there. Tons of money wrapped up in that thing too I see. And I know that garage and truck aren't cheap either. I want all of that one day as well. Just curious as to what you do for a living to afford everything??
I have been working towards this for the last 25 years❤️❤️
@@ostacruiser Yeah me too. Just want the big boy toys as well. Come on man what do you do for a living? I'm looking for a career change that will let me have what you have.
@@richr909 four months and he still ain't saying... hmm
Is that a brand new xmr I seen in the back round 🤫🤷♂️
Why it have two exhausts?
Race cut out
Did you wipe off the excess tire shine or buff the plastics? Great video.
Yes I forgot to mention I usually wipe it down a few minutes after the tire foam goes on
@@ostacruiser Thanks. I use SC1 now, but it is very expensive and it takes a lot to do my quad ,and I also use it on my zero turn mower to make it easier to clean after I cut the grass. Makes the underside of the deck much easier to clean too. Now I have other products to try.
@@ostacruiser that is a critical piece of info you left out..
shocked u dont hav a soap sponsor! id rather liv in ur shop than my house lol
The light bar though
Are these chemicals biodegradable?
Yes
btw ostacruiser i love sherps
You gotta watch that super clean on bare aluminum it will ruin it
Hi Do you need some great lighting upgrade for your car to help you better driving, off-road and adventure.We're the pro auto lighting manufacturer for nearly 20 year and we're looking for sponsorship!
No thank you. We have a great lighting supplier @bajadesigns
There just like washing a combine lol 100% right
New yellow project ??
Coming soon!
Next time just bring it to your pond 😜 for instant Wash