Thanks so much guys. I feel like we should be blushing after such a brilliant show of what this Muc-Off product does. It's our favourite cleaning product at Dirty Life and rarely do we only sell it once. Everyone comes back to buy more. And the best part about the Silicone Shine is there was a $4 CAD /can reduction in price so it's down to $14.99 per can from $18.99 per can. I guess I need to introduce you guys to the Snow Foam this summer too! It's a huge time saver on the SxS units.
If you enjoyed the video make sure to leave a like, comment, share and subscribe! If you want to support us further we do have merchandise at the link below: bit.ly/mainvillemerch
I like using a leaf blower to get the excess water out of the cracks and crevices before I put the final detail on helps speed up the drying process also
Thanks I requested this video a week or so ago and you guys really made things a lot easier for me! Going to have to try some new products out to I think lol. This just shows all the hard work you guys do in each and every video! Keep up the good work!
Good tips, I’d add with the power wash careful around stickers but particularly seals and bearings. I only used a power washer (water blaster we call them) to remove caked on bulky mud and I never used it on my road bike but that’s not to say you can’t obviously. Muc Off was my go to product for bike cleaning too for the most part. Oh and dishwashing liquid strips wax so I avoided that like the plague (cv-19 🤔) no matter how desperate I was
Nice job! That is a lot of work. Fortunately, I mostly trail ride with mine. Now, if that big buck is back in some bad stuff, I might have to go after him. lol
Nice ! I basically do the same thing after every ride, I don't use the same products but that doesn't matter. You are so right about the pressure washer, ya gotta stay away from the electrical/bearings and stuff, they can force water into places. Nice video and the bike looks great !
Good Video guys, simpy explained. It is all in the detail!! After spending so much money on your bike you should take pride in keeping it looking as good as can be.
Nothing wrong with a clean ride. Mine is always super shined up before every ride. Tires and everything underneath it. People say I waste my time just to get it dirty but I like it to look good while I’m not riding. ‘19 RZR 1000 highlifter owner here. Good video y’all.
@@MainvilleATV lots of people don’t understand from a maintenance perspective, you can also find things that need to be addressed while your up close and personal cleaning a machine. Anything from oil leaks to torn CV boots. That’s a huge plus
I just want to tell you I gave muck off a try because of you guys. I’ve had stubborn stains that wouldn’t come off. They are finally off. Thank you guys so much for the review and recommendation.
Any tips for us city boys that have to use a car wash to wash the toys? Not legal to wash in my driveway/garage and it I spend like 30 bucks in the truck bay, and still not get it very clean. I wonder if they allow me to use products
Great video as always ! Pretty much same process I use but like you said I’m a tire shine user even though I’ve heard great things from muck off. I find tire shine get the same effect and leave a layer not slick or sticky layer but protective film and much and stuff doesn’t stick quite as much on the next ride. Beautiful quads guys love them both !
I ride up in the mtns and everything in between but honestly the swamp grass is the most annoying part. I blast off the mud as best i can and let the grass dry out so on the next trip it falls off due to it being dried out and brittle.
One item that might help. There is a product, called a foam gun. It's an attachment to the end of your pressure washer wand. Pour a minimal amount of soap into it. Then spray down the machine and it will foam the machine completely with soap... it's a great. Also get a good leaf blower and use it to blow dry the machine. Saves a lot of time, yes they make a specialty machine for blow drying... $$$... up to you.
I bought an $89 ryobi pressure washer for my machine it has just enough power to wash my machine without putting holes in the seat or peeling off stickers. My gas powered one was just too powerful and unnecessary. I also bought a foaming attachment and it works great.
@@MainvilleATV Yeah that works too. I saw a guy shred his seat with a pressure washer in 2 seconds freaked out moved the nozzle away from the seat fast an then blew the stickers off it was hilarious for us watching but not for his wallet
Great videos should look into a foam cannon for the soap it just attaches to your pressure washer handle and they do a great job I find and they are Room relatively cheap on Amazon thanks for the content
As mentioned in the video, we normally do use "Snow-Foam" and a foam gun, but we were out of it at the time of this video. Great stuff! Thanks for watching!
I've heard a lot of people doing that, but I also heard along the way that over time it can fade plastics. I don't know if that's true or not, but just some food for thought... (Maybe it was the Muc-Off sales rep that told me that!?)
The Tacoma pulls our small 14x7 with both atvs no issue. For the 24ft enclosed car hauler and both atvs we use the ram. The small trailer is a sure trac, the enclosed is stealth
Because of you guys I have been using this products as well. Bought a 4L jug and 4 cans of silicone spray, I had always used the silicone right after cleaning but now I will wait until the day before I ride. On your pressure washer what tip do you find works best? I think I saw the yellow one
Mainville ATV and Outdoors thanks ! Oh and Cass is right it smells good in the garage after using it, I didn’t know about the respirator lol. You might have saved me from killing myself hahaha
What are you guys doing to maintain your driveway and remove mud from the gravel afterwords? I find if I wash my machines on gravel it makes one heck of a mess.
Mainville ATV and Outdoors exactly! I was very happy to hear it was the whole website! Just ordered the sya warrior riser snorkel kit for my can am and saved a good $30! Can’t wait to see it on the bike, and I hope it comes with a sticker 😂
Thank you for this vid....I all way's wanted to know a good way to wash & clean my atv.....So would you put some of the silicon shine on the engine and on some of the wiring or just on the plastic pieces, seat handlebars, racks, wench?
Where's your leaf blower? If you blow the water off the atv with a leaf blower after washing it you don't get water spots and don't need to rub the silicone spray on it hardly at all, you can just spray it on.
Hey could anyone tell me where I could get the silicon shine from? I'm from America and not CA so its not a parts store find for me... wanted to try some on my polaris and I can only find some stuff in a blue can, its still muc off just didn't know if its the same
@@MainvilleATV awesome thank you very much I just ordered 2 cans! I have the cleaning down but I really love that added shine to the bikes! Keep up with the great content!
hey , i bgot new snorkels t, they look similiar to the ones from oyur girlfriend atv , anyway i dont know how to clean them , idk if i need to be care full to not put water in snorkel or it doeasnt matter , pls help
We found it in the previous mud series in the bush so we strapped it to my quad and named it lol pretty sure the neighbours kid ran off with it when I filmed this video
We try to avoid the pressure washer, and use the hose on our RZR, when i've used the pressure washer, it's introduced some issues with things like our tail lights. When i'm in a hurry i still break out the pressure washer for the heavy stuff, tho. And i love using the foam cannon attachment on the pressure washer.
Choke it down Cass! So you edit out Cass doing all the hard work while you do the easy work of hosing it off. I see how it is! LMAO. Where is the review on the ole lady bicycle in the background there?! I feel like the spraying action is going back to your teenage graffiti days! Always wondered what you used on the skin to keep yourself looking so good 😜
Do not use tire shine sticky. I love watching you guys use tire shine. Number 1 dirt collector will turn brown after a while. Never use pressure washer.. will drive dirt so deep in to Areas can't seen. U will see your self cars trucks.
Just an observation. If a person were to ride their quad at a medium speed and not gun their way through mud dirt and puddles their quad should not get this dirty. Even still it seems like the maker of this quad didn't have engineers who really considered the environment their machine would be in. That under carriage should have some kind of plastic or rubber guards to stop mud and water from splashing up. I haven't fully reviewed the diagram of this particular model but it seems like the engineers should have been able to make some splash guards fit within that platform. They also should have anticipated someone using a pressure washer to clean their quad off. Which means they should have designed the wiring, electronics and electrical connection points to be water proof. A machine is only as good as the engineers who designed it. Basically unless you are an engineer you will give zero cares about my comment.
Thanks so much guys. I feel like we should be blushing after such a brilliant show of what this Muc-Off product does. It's our favourite cleaning product at Dirty Life and rarely do we only sell it once. Everyone comes back to buy more. And the best part about the Silicone Shine is there was a $4 CAD /can reduction in price so it's down to $14.99 per can from $18.99 per can. I guess I need to introduce you guys to the Snow Foam this summer too! It's a huge time saver on the SxS units.
When something is good, we have zero issues promoting it. Especially the time saved. You're very welcome!
I always get asked if I ever ride my machine when people see it for the first time. Yep, it's just clean because I take care of my stuff!
'Atta boy! Little bit of P.O.O my dude.
If you enjoyed the video make sure to leave a like, comment, share and subscribe! If you want to support us further we do have merchandise at the link below:
bit.ly/mainvillemerch
I like using a leaf blower to get the excess water out of the cracks and crevices before I put the final detail on helps speed up the drying process also
Genius! Definitely going to keep that one in mind George!
Thanks I requested this video a week or so ago and you guys really made things a lot easier for me! Going to have to try some new products out to I think lol. This just shows all the hard work you guys do in each and every video! Keep up the good work!
Good tips, I’d add with the power wash careful around stickers but particularly seals and bearings. I only used a power washer (water blaster we call them) to remove caked on bulky mud and I never used it on my road bike but that’s not to say you can’t obviously. Muc Off was my go to product for bike cleaning too for the most part.
Oh and dishwashing liquid strips wax so I avoided that like the plague (cv-19 🤔) no matter how desperate I was
Nice job! That is a lot of work. Fortunately, I mostly trail ride with mine. Now, if that big buck is back in some bad stuff, I might have to go after him. lol
Nice ! I basically do the same thing after every ride, I don't use the same products but that doesn't matter. You are so right about the pressure washer, ya gotta stay away from the electrical/bearings and stuff, they can force water into places. Nice video and the bike looks great !
Thanks!
Great video! Taking proper care of your equipment just makes it last so much longer! And makes it more enjoyable to ride!
Good work guys , videos keep getting better !! 👍
Thanks Adrian!
You have a piece of siding loose in the background you should get that before the wind destroys it and makes it worse! You're welcome
Good Video guys, simpy explained. It is all in the detail!! After spending so much money on your bike you should take pride in keeping it looking as good as can be.
Exactly! Thank you for watching :)
the wow factor is really reflected. Nice one.
What skid plates do you recommend. Looking to get some for my 2021 kidiac 450 and 700
appreciate all your hard work to make it look pretty.
Thank you! We try to put our best effort in all around :)
how long is that mud bandit tow strap? not sure if i want longer or shorter one
Only thing I do differently after first rinse I pull seats side plastic etc and get underneath them in fl sand/mud gets everywhere after water runs
I've gotta ask what are the dimensions on that single axle trailer you're hauling them on
Nothing wrong with a clean ride. Mine is always super shined up before every ride. Tires and everything underneath it. People say I waste my time just to get it dirty but I like it to look good while I’m not riding. ‘19 RZR 1000 highlifter owner here. Good video y’all.
I like my toys put away in good shape too man!
@@MainvilleATV lots of people don’t understand from a maintenance perspective, you can also find things that need to be addressed while your up close and personal cleaning a machine. Anything from oil leaks to torn CV boots. That’s a huge plus
I just want to tell you I gave muck off a try because of you guys. I’ve had stubborn stains that wouldn’t come off. They are finally off. Thank you guys so much for the review and recommendation.
Glad it worked out for you!
Any tips for us city boys that have to use a car wash to wash the toys? Not legal to wash in my driveway/garage and it I spend like 30 bucks in the truck bay, and still not get it very clean. I wonder if they allow me to use products
Great video. Sometimes I will use my compressor to remove dirt in hard to reach places.
Makes sense! I've dusted mine off in the shop that way before.
The dino LOL
Good tips.
Good vid guys, thanks
"Always use it outside or with a respirator"
Cass- "oooh that smells good"
Hahaha, yes. I nearly spit my coffee
I was thinking... "i use it inside because it smells so good!" lol
I'm washing the bikes again today and this comment is all I can think about haha, we're still laughing about it. - Cass
Great video as always ! Pretty much same process I use but like you said I’m a tire shine user even though I’ve heard great things from muck off. I find tire shine get the same effect and leave a layer not slick or sticky layer but protective film and much and stuff doesn’t stick quite as much on the next ride. Beautiful quads guys love them both !
Thanks fellah! Many ways to do things, figured since I was asked so often Id share my way :)
I ride up in the mtns and everything in between but honestly the swamp grass is the most annoying part. I blast off the mud as best i can and let the grass dry out so on the next trip it falls off due to it being dried out and brittle.
One item that might help. There is a product, called a foam gun. It's an attachment to the end of your pressure washer wand. Pour a minimal amount of soap into it. Then spray down the machine and it will foam the machine completely with soap... it's a great. Also get a good leaf blower and use it to blow dry the machine. Saves a lot of time, yes they make a specialty machine for blow drying... $$$... up to you.
I bought an $89 ryobi pressure washer for my machine it has just enough power to wash my machine without putting holes in the seat or peeling off stickers. My gas powered one was just too powerful and unnecessary. I also bought a foaming attachment and it works great.
Ryobi makes great products. I love their battery operated line! We just throttle ours down and use a different tip. No issues here.
@@MainvilleATV Yeah that works too. I saw a guy shred his seat with a pressure washer in 2 seconds freaked out moved the nozzle away from the seat fast an then blew the stickers off it was hilarious for us watching but not for his wallet
Great Video, Thanks.
You're very welcome, Brad!
Who else saw the dinosaur with the chainsaw
No idea what you're talking about.
What ever he’s smoking I want some
I saw it😂
If you use a leaf blower it gets all the water off and out of the areas it like to drip from later
I used to use dawn dish soap but found out it washes off the wax or anything you that's on the paint or fender to protect them
The worst is always the skid plate, i took mine off the other day and there was 2" of mud in there lol
Great videos should look into a foam cannon for the soap it just attaches to your pressure washer handle and they do a great job I find and they are Room relatively cheap on Amazon thanks for the content
As mentioned in the video, we normally do use "Snow-Foam" and a foam gun, but we were out of it at the time of this video. Great stuff! Thanks for watching!
Mainville ATV and Outdoors Oh I'm sorry Must have missed that 🤟🤙
Cool vid! I've been using tire foam spray on mine.
I've certainly done that in the past!
I've heard a lot of people doing that, but I also heard along the way that over time it can fade plastics. I don't know if that's true or not, but just some food for thought... (Maybe it was the Muc-Off sales rep that told me that!?)
Where did you get your trailer
Love the dinosaur with a chainsaw tho
No idea what you're talking about.
What brand and model and size trailer do you use? And is there any issue pulling that trailer with two machines with the tacoma?
The Tacoma pulls our small 14x7 with both atvs no issue. For the 24ft enclosed car hauler and both atvs we use the ram.
The small trailer is a sure trac, the enclosed is stealth
Would love to see a video about your lucky 7 steps and the pros and cons to it.
Noted!
What kind of trailer is that? I like it the side loading
Because of you guys I have been using this products as well. Bought a 4L jug and 4 cans of silicone spray, I had always used the silicone right after cleaning but now I will wait until the day before I ride. On your pressure washer what tip do you find works best? I think I saw the yellow one
I use white. It's a medium pressure semi wide and I can adjust my handle if I need more or less.
Mainville ATV and Outdoors thanks ! Oh and Cass is right it smells good in the garage after using it, I didn’t know about the respirator lol. You might have saved me from killing myself hahaha
@@SCOTIAN_ It likely wont, but lets be real its not a terrible idea. lol
that outlander is huge
Does your Kodiak have full aluminum skid plates and how do you wash them?
It has no skid plates.
What are you guys doing to maintain your driveway and remove mud from the gravel afterwords? I find if I wash my machines on gravel it makes one heck of a mess.
Its packed down really well, so I just rake the loose.
Are those aftermarket wheels? If so what brand?
We use an old windex bottle to mix arse?
How do you get your exhaust shine up?
With the same product, the muc off cleaner and sometimes a quick rub with the finger to agitate it :)
Was deciding if I wanted to order a snorkel kit from dirty life now I’m definitely ordering it with this big 5% discount 😂👍🏼
Because its universal on his website 5 percent can be very significant. Wish I could give more my dude!
Mainville ATV and Outdoors exactly! I was very happy to hear it was the whole website! Just ordered the sya warrior riser snorkel kit for my can am and saved a good $30! Can’t wait to see it on the bike, and I hope it comes with a sticker 😂
Thank you for this vid....I all way's wanted to know a good way to wash & clean my atv.....So would you put some of the silicon shine on the engine and on some of the wiring or just on the plastic pieces, seat handlebars, racks, wench?
@@jessecook2839 I wouldn't put it on the engine or wiring. The rest is good enough.
@@MainvilleATV ok thanks
Where's your leaf blower?
If you blow the water off the atv with a leaf blower after washing it you don't get water spots and don't need to rub the silicone spray on it hardly at all, you can just spray it on.
Dont own one but you're not the first to mention it. I'll have to consider it if not for leaves haha
Hey could anyone tell me where I could get the silicon shine from? I'm from America and not CA so its not a parts store find for me... wanted to try some on my polaris and I can only find some stuff in a blue can, its still muc off just didn't know if its the same
It is available at dirtylife.ca and yes they of course ship anywhere in the US. Dont forget our discount code "mainville" at check out for 5% :)
@@MainvilleATV awesome thank you very much I just ordered 2 cans! I have the cleaning down but I really love that added shine to the bikes! Keep up with the great content!
thanks
You mention you'd be using 3 products at the beginning of the video but were out of one of them. What is the 3rd product and what do you use it for?
Muc Off Snowfoam is the product we didn't have in the video. For a power washer/foam cannon.
It's about time you share your "dirty" litlle secret! :) Thanks guys.
Haha dad jokes.
How big is your trailer thanks for the vidio
hey , i bgot new snorkels t, they look similiar to the ones from oyur girlfriend atv , anyway i dont know how to clean them , idk if i need to be care full to not put water in snorkel or it doeasnt matter , pls help
Definitely avoid getting water into the snorkel. :)
What size is your trailer
8x24 feet with a 2.5ft v nose.
Got trailer house toys garbage trucks. I'm a millwright I've seen machinery dirt drove driven so far it's crazy. U will never use pressure again.
I found simple green works great but dont leave on there more than 5 min.
That will eat aluminum like no tomorrow. So no rims or radiator if you like what you have.
so is no one going to point out the dino with a chain saw at 6:00
Must be a glitch on your screen.
I just looked through all these comments trying to figure out what the duck decoy is for
We found it in the previous mud series in the bush so we strapped it to my quad and named it lol pretty sure the neighbours kid ran off with it when I filmed this video
But I don’t have a pressure washer
I've done this exact process with a garden hose just fine.
We try to avoid the pressure washer, and use the hose on our RZR, when i've used the pressure washer, it's introduced some issues with things like our tail lights. When i'm in a hurry i still break out the pressure washer for the heavy stuff, tho. And i love using the foam cannon attachment on the pressure washer.
My garden hose has 90 psi.
Choke it down Cass! So you edit out Cass doing all the hard work while you do the easy work of hosing it off. I see how it is! LMAO. Where is the review on the ole lady bicycle in the background there?! I feel like the spraying action is going back to your teenage graffiti days! Always wondered what you used on the skin to keep yourself looking so good 😜
Where did you get that front winch hook mount?
It's from dirtylife.ca my dude. :)
@@MainvilleATV thanks. Love your videos. Keep up the good work. Love how you wife rides to. Mines going to start this year.
@@ryandupont4104 thank you and good luck! It's much better bringing the other half along!
@@MainvilleATV ok what is it called so I can look it up.
@@ryandupont4104 rjwc winch hook mount
Should have done the Yamaha instead😃😃 I mean who wanna se a canam shine?
Haha, Ill make sure to tell Cass I've been shunned ;)
What kind of atv is that orange one
Can Am Outlander.
@@MainvilleATV thanks nice looking machine look fed to using some muc off 👍
@@kevins2386 dirtylife.ca give them a call :)
If I knew I had to detail my machine every time I ride, I wouldn’t ride nearly as much as I do.
Feeling guilty, going to have to wash my machine tomorrow.
Haha I get that feeling a lot. I hear you.
@@MainvilleATV The XMR looks mega mate.
The dinosaur in the background tho😂
You seeing things?
Love the vids btw
@@haydenknowles6566 thank you!
@@haydenknowles6566 appreciate that! Make sure to share it if it was useful :)
Not gonna lie I don't wash my waders or my helmet haha.
We only do that after mud runs, so I hear you lol.
Always wash your helmet.
Anyone try RainX on helmet?
@@danlux4954 I've heard mixed reviews. Some people say it works some people say don't bother.
But I've never personally tried it.
@@odd1363 Oh I was the padding inside. But outside hardly ever 😆
Enjoy your videos. But where's diesel?
He was off chasing birds, he has a very busy schedule.
@@MainvilleATV Or was he chasing the dinosaur???
SC1 is a lot better though 👍🏼
Theres nothing wrong with pressure washing a radiator 😩
Do not use tire shine sticky. I love watching you guys use tire shine. Number 1 dirt collector will turn brown after a while. Never use pressure washer.. will drive dirt so deep in to Areas can't seen. U will see your self cars trucks.
I think you have to let Cathy talk
Guilty of power washing my Yamaha and then stopping there with the clean up.
Just an observation. If a person were to ride their quad at a medium speed and not gun their way through mud dirt and puddles their quad should not get this dirty. Even still it seems like the maker of this quad didn't have engineers who really considered the environment their machine would be in. That under carriage should have some kind of plastic or rubber guards to stop mud and water from splashing up. I haven't fully reviewed the diagram of this particular model but it seems like the engineers should have been able to make some splash guards fit within that platform. They also should have anticipated someone using a pressure washer to clean their quad off. Which means they should have designed the wiring, electronics and electrical connection points to be water proof. A machine is only as good as the engineers who designed it. Basically unless you are an engineer you will give zero cares about my comment.
P*O*L*A*R*I*S PRO 🌟.
Wow u had more about filming yourselfs then cleaning the atv .lol
You can skip if you'd like. :)
Turned it off do to the terrible audio noise. Sorry.
They are not bikes!!!! Bi indicates 2 you have FOUR wheelers! LOL you CANADIANS kill me.
Bike bike bike bike. :)
You talk too much just get to it… damn
RUclips comes with the ability to skip. Try it.
Just got my new yamaha grizzly 700 delivery
Congrats!
@@MainvilleATV 2023 midnight blue with mudzilla tires