Great test video! We have received your feedback and strengthened the packaging at the rear of the car. Looking forward to the upcoming modification video.😆
Congratulations and well done for getting so many upgrade and mod parts released with the actual vehicle. Packaging and manuals all felt like other big premium brands so you are 100% on the right track.
you need to give this car to real speedrunners, who know what theyre doing as its mainly interest for the speedrun community. Unfortunately i only saw everyone bash it around and crash it every run as they dont know how to set it up and control it at those speeds. thats a bit disappointing.
Glad to see you were one of the lucky few to have received the CF version. So far, you & Tomley are the only two I'm aware of to have received the CF...all others I'm aware of received the aluminum brushless versions. Can't wait to receive mine (along with the extra 'goodies' I'll receive for being one of the first 500).
At 11:22 the 120 A brushless waterproof ESC is the exact same as mine in Carbon Brushless, except mine is turned 180 degrees from yours (purchased 10/2023). I also notice that ESC is very fan loud. After turning it on, ESC get's to high fan before even driving it (runs fine). It might supposed to be like that, it's my first RC supercar so I don't know. It's very fast and handles well out of box for sure.
The hedge on 1 side and bushs on other side are most perfectly trimmed ever! Nice car too mate. Hopefully when i realize my dream of living on a narrow boat in U.K. canal sys. I may drive that same perfectly pruned road.
Good to see the carbon fiber version finally getting sent out for review. Hope the quality control issues are rectified before production versions are sent out.
Yep just arrived this morning. I can see a fix for the exhaust breaking being implemented quickly. The ESC is an easy fix as the kit comes with a load of extra sticky pads so I can fit that again no problem. Next video we do some mods, up the spur and pinion and go for 4S. That should really wake this thing up LOL
@@RCKickschannel I don't plan on ever running it over 3s... the sweet spot for a 1/10 rc.... should remain "bashable". 4s stability on such a short chassis is a concern.
RLAARLO is developing an ESC that supports 6s. Regarding linear acceleration and track operation, RLAARLO is developing an intelligent driving assistance system that is expected to be launched before the end of April. Regarding the intelligent driving assistance system, the gyroscope is the simplest function, and RLAARLO has conducted intelligent assistance research and development on the controller, adjusting it intelligently according to the angle of the curve, so that novices can also achieve good results! Coming soon!
If you’re wanting to put in some speed runs one thing I would do is drop the suspension down , as it is now looks like it will probably lift once past 60mph
Very nice car. I wholeheartedly agree with you, re gearing it down. If I'd just bought a car like this, having it capable of 70mph out of the box would be pretty intimidating!! I'm looking f8to see the cars, and your progress. 😎👍🏻
Hope you think about going to Elvington speed run event on the 15th April or one of the three Llanbedr ROSSA events this year. Best places to speed run... This looks like the new must have 2S speed run chassis. Look forward to seeing how it progresses in your hands.
It is a very interesting product and I will check it out myself. The red/white coloring scheme does not seem to have been used real cars that were raced back then. Instead, what would have been much more interesting is the 'Pink Pig' paint job. Also, it would be great if the company could expand this product with other body shells of the late 60's to 70's Le Mans racing cars such as Matra Simca, Porsche 908, Gulf Mirage, Porsche 936, Renault Alpine A442, and so on.
This brand is really getting a lot of stuff right. I like offroad more so I'll skip this one but I do think it looks awesome! I'd love to see a trophy truck or a prerunner from them in 1:10 scale. Then I might consider 😂
I think there is a legitimate place for 1/10th scale speed run cars. Yes they are going to be less stabile, twitchier. This is where a lot of people started setting up 1/10 scale buggies for speed run. Hmmm, maybe Gavin, this is a way to utilize a surplus of TT-02 chassis. SPEED RUNS . Just how big a battery motor esc combo can you squish into a TT-02.
First things to do.. get rid of the spare tire lol then ditch the disc brake decorations, put foam tires on.. then focus on the shocks and gearing.. after that ditch the electronics and get a better motor and esc
If people wanted a racer they should get something else. These type of RC customers likes the decorations ( lights, chrome,etc. ) . Some different realism. I don’t blame them.
Looks a lovely car! I’d really like one to try out but at $500 at full price is a lot! That’s Arrma territory. I think the top spec maybe out of reach of a lot of people.
Hey Gavin big fan always watch you stuff. I have an off topic question though. I’ve never had a tamiya and am think about alpine A110 jager meister on the M-06 chassis and wonder what you think about that one? Thanks for all your efforts on your channel!!
The body is not an entry level so take your time if you haven’t done any detailed bodies before. 100% it will look amazing when finished as I love the scale look of these. Chassis isn’t hard to do at all. I have one myself in the build list but it’s a good few months off yet. Go for it!
@@RCKickschannel Gavin, I probably speak for everyone, when I say, we all enjoy ALL of your videos. Wish mine could be as polished as yours...but, I know they never will be. So, instead, I just enjoy RC. 🤙🏼
I'll be getting on of these. I think I'll get a roller. Why? Because I don't think the electronics are up to actual speed running. I have a Tamiya TA-06 that would destroy this car in a race as it comes set-up, even running 2s in my Tamiya vs this on 3s.
I'm kinda late to the party but I just checked the price today (USA) and the Carbon Brushless is now $399.99 only 4 months later!? I've been reading about a lot of customer service issues Rlaarlo apparently has, so their answer is to increase the price by $100!? Supply & demand I guess. Hmmm...still on the fence with this one. Maybe I'll still buy the Traxxas 4-Tec 2.0 but buy the Rlarrlo tires/wheels for it! 🤔 I just see how the Rlaarlo looks like it drives on rails yet I see a lot of 4-Tec 2.0's spinning out of control. Not sure if this is driver or more car. Any thoughts for a guy who's sitting on the fence? 🏎
Carbon Brushless acceleration 917 heaven... I bought mine on Amazon for $339. A coupon for $50 off showed up when I ordered it, nice. These are ready to scream, doing donuts and speed runs in lot. Neighbors are dealing with guiltorist shift, from my Drone flying, to RC supercars that are scary fast for sure, too bad for them. My life is redeemed, I accelerate I live.
I'm looking forward to seeing these things go, like proper speed runs. I'm thinking getting that speed with a 1/10 may be a tad tricky. The smaller platform may make them easy to launch. Looks like fun out of the box for sure though.
The transmitter is based on DumboRC which has a decent range. It’s the same for the AMX12 which I’ve run out pretty far with no issues. But for serious speed running yeah prob need to change it out to a better one so you have more control over throttle curves etc. but great video nonetheless. 👍🏻👍🏻
Also living in the UK I can not see the point of greeting into speed records. We simply do not have the roads to do it. Yes we have airfields you can hire at a big cost put you need regular runs to test. I would garente no brit will hold a speed record, purely down to lack of tracks or roads etc
100% this was box stock, I didn’t want to do anything for the first run. I can see why Rlaarlo did this as it’s like a training mode. Everything is in the box to go much faster so I think it was a good way to go and much safer for noobs and younger people.
Tempted to get one for how pretty it is. Stock or not though, out-of-the-box speed is a bit disappointing... for comparison had my DT-03 on 2S up to 56kmh the weekend past. Really enjoyed the video, thx.
Will be interesting to see this as it progresses, i think 39mph is all i could keep up with these days 😂 agree about the gearing, they do right having it slow out the box, get used to that, then gear up 😎 i allso think you should do a gulf body 👌
Seeing that body begs the question "why have Tamiya not done a porsche 917 kit? A detailed, licensed tamiya quality body on one of their onroad chassis would be a great kit. '71 Gulf or Martini liveries would be great stuff. Good luck with the speed running. Cheers.
Why they put 160kph when you have to change the esc / motor / gearing / tires /ect to even come close. So the roller probably says 160 kph also. It’s to small to be a real speed run chassis. Yea I’m knocking it but it does have a beautiful manual
I have the basic kit on pre-order. I have never heard of this company before, so I did not want to spend too much money on the car. I have not yet received my car yet. The car does look like it might be a really good car for the money. Thoughts?
It’s not been released yet, it will be soon. For the money a roller is great value. I do t have the alloy so I can’t say much about it but the carbon one looks lovely. We will see how it holds up and performs over the next few weeks 👍🏻
@@RCKickschannel I guess that is why I do not have mine yet. Also, I did not think the roller comes with LEDs. I will be curious to see how fast you can get it to go. Thanks
Hi! I don’t understand how a large chassis plate with no cut outs or open areas doesn’t turn this and other cars into airplanes. I have seen it first hand. Hope and pray you don’t hit a rock or slight variance in the road that pitches the nose upward even a millimeter or two….bye bye car.
The car needs to be lowered for sure as stock it will turn into a kite above 70. It has some cut outs but if you get it low enough the air passing user will be moving much faster than the air above it so it should suck itself down. Granted a flat bit of carbon isn’t going to work as well as venturi tunnels but for its price point and scale, it’s OK.
All youtubers are jumping all over this company. But why do we not tell the truth? O ya because you guys are paid and sent the best quality products. Us customers are sent cheap broken cars and parts. Mine came damaged broke. They finally messaged me after months. All they did was say here is 15 percent off sorry. Lmao u should take the products back and send ones that actually work. There all about money
I disagree. I reviewed the original Rlaarlo buggy and tge Amoril buggy. Both had issues. They got back to me and in the case of the first car I got a whole new car sent to me. Their customer service is great. They’re listening to what customers want and are continually trying to improve their product in the RC world. I was not paid to do my reviews nor have anyone else that did theirs.
@@IowaBudgetRCBashers ok I'll say there are some youtubers who are genuine. I'm not saying your not. But a lot are and a lot are paid. You guys generally do get the best products. That's understandable. But when someone like me who purchased 2 vehicles with my hard earned money and they only responded a month later and said o sorry we will give u 15 percent off that's very very bad I sent pictures proof etc. They may have done that for you but your reviewing there product you have a viewership and followers so if u complain and talk bad about them they will lose business. Someone like me they don't care about. I have proof. That's all I'm saying. I do love your videos and I appreciate your reviews comments. Thank you
@@james-dt4ei Hey brother, I'm sorry if you had a rough time. I don't have one of their cars, just because I don't know if I'd be able to find parts. Just something I noticed. Your original comment says they didn't respond for months, but after he replied, you said a month. Not trying to split hairs, but if you are going to challenge someone's content and a companies name, you should probably make sure that you are being accurate in your recounting of your experience. Just some friendly advice. Would hate to see someone who genuinely had a rough time of it get in legal hot water for slander. Just ask fox news about their dominion coverage.
I am going to tell you about my experience with this garbage car and this garbage brand, I bought the Rlaarlo ak 917 carbon fiber version, and the first thing when making the purchase I bought it with fast shipping paying 19 euros more for said shipping, supposedly it arrived in a week, well, lie, it took me 20 days to arrive, when it arrived it arrived with the steering out of adjustment, with one wheel facing one side and the other facing the opposite side, after looking closely at the car I realized that the screw that The connection between the servo arm and the servo horn was loose, and then I realized that one of the two small screws that the servo horn has is missing. In addition, this car has a serious signal loss problem. I am writing to the support. technician of this garbage brand, and until today they have been giving me my time, they say that the missing screw is too small to send it, anyone who buys this car forgets to be able to return it is impossible, they brag that they have good technical support and it is a garbage, just like the customer treatment, I do not recommend products from this brand, it is a waste of money
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Great test video! We have received your feedback and strengthened the packaging at the rear of the car. Looking forward to the upcoming modification video.😆
Congratulations and well done for getting so many upgrade and mod parts released with the actual vehicle. Packaging and manuals all felt like other big premium brands so you are 100% on the right track.
Hey That is some good service there! Cant wait till mine arrives,with my first 200 goodies,I vwry tempted ordera carbon roller...hmmm
you need to give this car to real speedrunners, who know what theyre doing as its mainly interest for the speedrun community. Unfortunately i only saw everyone bash it around and crash it every run as they dont know how to set it up and control it at those speeds. thats a bit disappointing.
Very cool colors, I like it,good job on the video,great detail like I was doing the unboxing myself.
It's a great looking car. It will be interesting to follow your progress and see how the car survives.
So much hype around this one
多謝！
Thanks for watching, you are most welcome.
I have only just watched the Steve McQueen Le Man's movie last week and I am feeling love for the Porsche 917.
The quality on this car just looks better than anything ive ever seen 😍
I can’t wait until Raz Shifrin or Stew Mac get a hold of one
Glad to see you were one of the lucky few to have received the CF version. So far, you & Tomley are the only two I'm aware of to have received the CF...all others I'm aware of received the aluminum brushless versions. Can't wait to receive mine (along with the extra 'goodies' I'll receive for being one of the first 500).
Finally a proper looking 917!! I'd love one to make into a proper gulf liveried not too crazy fast runner with all the lights etc!!
Nice I bought 2 one stocked 2nd I'll build up with my own electronics and tires 😊
At 11:22 the 120 A brushless waterproof ESC is the exact same as mine in Carbon Brushless, except mine is turned 180 degrees from yours (purchased 10/2023). I also notice that ESC is very fan loud. After turning it on, ESC get's to high fan before even driving it (runs fine). It might supposed to be like that, it's my first RC supercar so I don't know. It's very fast and handles well out of box for sure.
The hedge on 1 side and bushs on other side are most perfectly trimmed ever! Nice car too mate. Hopefully when i realize my dream of living on a narrow boat in U.K. canal sys. I may drive that same perfectly pruned road.
Good luck with your dream Chris! 👏🏻👍🏻👍🏻
Good to see the carbon fiber version finally getting sent out for review. Hope the quality control issues are rectified before production versions are sent out.
Yep just arrived this morning. I can see a fix for the exhaust breaking being implemented quickly. The ESC is an easy fix as the kit comes with a load of extra sticky pads so I can fit that again no problem. Next video we do some mods, up the spur and pinion and go for 4S. That should really wake this thing up LOL
@@RCKickschannel I don't plan on ever running it over 3s... the sweet spot for a 1/10 rc.... should remain "bashable". 4s stability on such a short chassis is a concern.
These are such beautiful cars. Totally needs gulf stickers
RLAARLO is developing an ESC that supports 6s. Regarding linear acceleration and track operation, RLAARLO is developing an intelligent driving assistance system that is expected to be launched before the end of April. Regarding the intelligent driving assistance system, the gyroscope is the simplest function, and RLAARLO has conducted intelligent assistance research and development on the controller, adjusting it intelligently according to the angle of the curve, so that novices can also achieve good results! Coming soon!
If you’re wanting to put in some speed runs one thing I would do is drop the suspension down , as it is now looks like it will probably lift once past 60mph
Very nice car. I wholeheartedly agree with you, re gearing it down. If I'd just bought a car like this, having it capable of 70mph out of the box would be pretty intimidating!! I'm looking f8to see the cars, and your progress. 😎👍🏻
See you in the Speedrun Challenge Sir 👌😁🤜🏽🤛🏽
That cars beautiful an I like the different options too. Great video
Thanks 👍
I can't wait to get mine
Hope you think about going to Elvington speed run event on the 15th April or one of the three Llanbedr ROSSA events this year. Best places to speed run...
This looks like the new must have 2S speed run chassis. Look forward to seeing how it progresses in your hands.
Happy that upgrades are available when the cars are… *laughs in Kyosho*
just bought the 1/10 Carbon Fiber Brushless RTR On-Road Cars, Supercar,AK-917 one. Just for an invetsment
Foam tyres should be one of the most important next steps!
100%
Cool car
Absolutely awesome 😊❤️
It is a very interesting product and I will check it out myself. The red/white coloring scheme does not seem to have been used real cars that were raced back then. Instead, what would have been much more interesting is the 'Pink Pig' paint job. Also, it would be great if the company could expand this product with other body shells of the late 60's to 70's Le Mans racing cars such as Matra Simca, Porsche 908, Gulf Mirage, Porsche 936, Renault Alpine A442, and so on.
apart from the 917k that won Leman in 1970 you mean? A Pink Pig and /or ather shells would be pretty sweet though!
Nice to see some competition for Traxxas.
Dang that road looked so narrow in the video I just knew you were gonna put it under your Benz 😂 good on you for bringing it home in one piece 👍👍
It's nice and smooth and I can see a long way so its great for that. I think I will park the car down the road next time for sure lol.
This brand is really getting a lot of stuff right. I like offroad more so I'll skip this one but I do think it looks awesome! I'd love to see a trophy truck or a prerunner from them in 1:10 scale. Then I might consider 😂
I think there is a legitimate place for 1/10th scale speed run cars. Yes they are going to be less stabile, twitchier. This is where a lot of people started setting up 1/10 scale buggies for speed run. Hmmm, maybe Gavin, this is a way to utilize a surplus of TT-02 chassis. SPEED RUNS . Just how big a battery motor esc combo can you squish into a TT-02.
I think someone had a TT02 over 100MPH!
First things to do.. get rid of the spare tire lol then ditch the disc brake decorations, put foam tires on.. then focus on the shocks and gearing.. after that ditch the electronics and get a better motor and esc
I think you are going to enjoy this series. 👍🏻👍🏻
If people wanted a racer they should get something else. These type of RC customers likes the decorations ( lights, chrome,etc. ) . Some different realism. I don’t blame them.
Looks a lovely car! I’d really like one to try out but at $500 at full price is a lot! That’s Arrma territory. I think the top spec maybe out of reach of a lot of people.
I Love your videos, but I want many of the cars you have demonstraited... your channel is starting to cost me money 😅. Thanks for the awesome reviews.
Hey Gavin big fan always watch you stuff. I have an off topic question though. I’ve never had a tamiya and am think about alpine A110 jager meister on the M-06 chassis and wonder what you think about that one? Thanks for all your efforts on your channel!!
The body is not an entry level so take your time if you haven’t done any detailed bodies before. 100% it will look amazing when finished as I love the scale look of these. Chassis isn’t hard to do at all. I have one myself in the build list but it’s a good few months off yet. Go for it!
I think I would want to check the shock and diff oils are all there as they should be before any other speed runs.
These should ALWAYS be checked on ALL RTRs, no matter what brand it is.
You will enjoy the next video in this series
@@RCKickschannel Gavin, I probably speak for everyone, when I say, we all enjoy ALL of your videos. Wish mine could be as polished as yours...but, I know they never will be. So, instead, I just enjoy RC. 🤙🏼
I'll be getting on of these. I think I'll get a roller. Why? Because I don't think the electronics are up to actual speed running. I have a Tamiya TA-06 that would destroy this car in a race as it comes set-up, even running 2s in my Tamiya vs this on 3s.
you just need to put your 3 or 4s bat in, rather than that pos 35c go for 100 to 120c. no gearing changes and you should be hitting around 80
I need one
Yeah that had to have been where they two as battery put a 4S battery in it and it will fly
I ordered the metal roller, I have a 6s castle system I wanna set up... Looks awesome and great video..
That will make it go lol.
I'm kinda late to the party but I just checked the price today (USA) and the Carbon Brushless is now $399.99 only 4 months later!? I've been reading about a lot of customer service issues Rlaarlo apparently has, so their answer is to increase the price by $100!? Supply & demand I guess. Hmmm...still on the fence with this one. Maybe I'll still buy the Traxxas 4-Tec 2.0 but buy the Rlarrlo tires/wheels for it! 🤔 I just see how the Rlaarlo looks like it drives on rails yet I see a lot of 4-Tec 2.0's spinning out of control. Not sure if this is driver or more car. Any thoughts for a guy who's sitting on the fence? 🏎
Carbon Brushless acceleration 917 heaven... I bought mine on Amazon for $339. A coupon for $50 off showed up when I ordered it, nice. These are ready to scream, doing donuts and speed runs in lot. Neighbors are dealing with guiltorist shift, from my Drone flying, to RC supercars that are scary fast for sure, too bad for them. My life is redeemed, I accelerate I live.
Hey mate. Have you seen the Honda Gax 125cc Tamiya limited edition?
I'd post a link but youtube will sink it. Google in its in Thailand.
I'm looking forward to seeing these things go, like proper speed runs. I'm thinking getting that speed with a 1/10 may be a tad tricky. The smaller platform may make them easy to launch. Looks like fun out of the box for sure though.
Yes the 1/10th scale will be a challenge once you start getting up around 100Mph
OMG, everyone received and reviewed of these the same day! 😂
We are a dedicated bunch all working to bring you the RC content ASAP
The transmitter is based on DumboRC which has a decent range. It’s the same for the AMX12 which I’ve run out pretty far with no issues. But for serious speed running yeah prob need to change it out to a better one so you have more control over throttle curves etc. but great video nonetheless. 👍🏻👍🏻
I will run it kit stock apart from the 4s and spur and pinion change next to see how she goes. After that, we will swap out some of the electronics
@@RCKickschannel Yeah be interesting to see speeds through incremental updates.
Also living in the UK I can not see the point of greeting into speed records. We simply do not have the roads to do it. Yes we have airfields you can hire at a big cost put you need regular runs to test. I would garente no brit will hold a speed record, purely down to lack of tracks or roads etc
I was scared when I saw that it only did 40 miles an hour but then I remembered that it’s on a cheap 2s
100% this was box stock, I didn’t want to do anything for the first run. I can see why Rlaarlo did this as it’s like a training mode. Everything is in the box to go much faster so I think it was a good way to go and much safer for noobs and younger people.
I am shocked it's not faster than my WLToys 144010 out the box 😮
does the 144010 do 4s out of the box?
@@grrfy there's no need, achieves better results on the smaller, cheaper batteries!
Tempted to get one for how pretty it is. Stock or not though, out-of-the-box speed is a bit disappointing... for comparison had my DT-03 on 2S up to 56kmh the weekend past. Really enjoyed the video, thx.
It’s on stock pinion and spur. That will change as I’ll fit the kit big ones in the next video.
You'll have to team up with Ricky @beyondRc to do your speed racing journey 😊
That would be a laugh. Ricky is a nice bloke so it could make for a fun video :)
@RCKicks I think it would be great for all you guys, Phil @TomleeRC has the Carbon one too, hoping to see Ricky's one next week👍
Will be interesting to see this as it progresses, i think 39mph is all i could keep up with these days 😂 agree about the gearing, they do right having it slow out the box, get used to that, then gear up 😎 i allso think you should do a gulf body 👌
Hoping for a reply 🤞 does the ESC fan appear replaceable with a more powerful aftermarket one?
I don’t think you can remove the ESC fan without opening up the ESC case.
Seeing that body begs the question "why have Tamiya not done a porsche 917 kit? A detailed, licensed tamiya quality body on one of their onroad chassis would be a great kit. '71 Gulf or Martini liveries would be great stuff.
Good luck with the speed running.
Cheers.
What scale is it please?
Why they put 160kph when you have to change the esc / motor / gearing / tires /ect to even come close. So the roller probably says 160 kph also. It’s to small to be a real speed run chassis. Yea I’m knocking it but it does have a beautiful manual
Yep it was a bit of a stretch lol. If I dropped it out of an aeroplane it would do 210mph but I wouldn’t put that speed on the box hehehe
I have the basic kit on pre-order. I have never heard of this company before, so I did not want to spend too much money on the car. I have not yet received my car yet. The car does look like it might be a really good car for the money. Thoughts?
It’s not been released yet, it will be soon. For the money a roller is great value. I do t have the alloy so I can’t say much about it but the carbon one looks lovely. We will see how it holds up and performs over the next few weeks 👍🏻
@@RCKickschannel I guess that is why I do not have mine yet. Also, I did not think the roller comes with LEDs. I will be curious to see how fast you can get it to go. Thanks
tomley got one
He’s special
He get's more freebies than the King! Prefer this channel.
Everyone it seems got one the same time. 😂
You n Tomley released your videos within a few moof each other on the carbon one
Yep, I was chatting with him about it today.
Hi did you have to pay import duty to uk thanks
I would think so.
Wheel base is too short to control at high speeds, you better have a wide track LOL
It’s only a 1/10th and it’s long for it’s scale but yes, even longer would help.
HERE AT 619 VIEWS!!! LETS GO!!!👍🏻
Blue balls
Er…
Hi! I don’t understand how a large chassis plate with no cut outs or open areas doesn’t turn this and other cars into airplanes. I have seen it first hand. Hope and pray you don’t hit a rock or slight variance in the road that pitches the nose upward even a millimeter or two….bye bye car.
The car needs to be lowered for sure as stock it will turn into a kite above 70. It has some cut outs but if you get it low enough the air passing user will be moving much faster than the air above it so it should suck itself down. Granted a flat bit of carbon isn’t going to work as well as venturi tunnels but for its price point and scale, it’s OK.
All youtubers are jumping all over this company. But why do we not tell the truth? O ya because you guys are paid and sent the best quality products. Us customers are sent cheap broken cars and parts. Mine came damaged broke. They finally messaged me after months. All they did was say here is 15 percent off sorry. Lmao u should take the products back and send ones that actually work. There all about money
I disagree. I reviewed the original Rlaarlo buggy and tge Amoril buggy. Both had issues. They got back to me and in the case of the first car I got a whole new car sent to me. Their customer service is great. They’re listening to what customers want and are continually trying to improve their product in the RC world. I was not paid to do my reviews nor have anyone else that did theirs.
@@IowaBudgetRCBashers ok I'll say there are some youtubers who are genuine. I'm not saying your not. But a lot are and a lot are paid. You guys generally do get the best products. That's understandable. But when someone like me who purchased 2 vehicles with my hard earned money and they only responded a month later and said o sorry we will give u 15 percent off that's very very bad I sent pictures proof etc. They may have done that for you but your reviewing there product you have a viewership and followers so if u complain and talk bad about them they will lose business. Someone like me they don't care about. I have proof. That's all I'm saying. I do love your videos and I appreciate your reviews comments. Thank you
@@james-dt4ei Hey brother, I'm sorry if you had a rough time. I don't have one of their cars, just because I don't know if I'd be able to find parts. Just something I noticed. Your original comment says they didn't respond for months, but after he replied, you said a month. Not trying to split hairs, but if you are going to challenge someone's content and a companies name, you should probably make sure that you are being accurate in your recounting of your experience. Just some friendly advice. Would hate to see someone who genuinely had a rough time of it get in legal hot water for slander. Just ask fox news about their dominion coverage.
39 mph 😂
1st
🤡
I am going to tell you about my experience with this garbage car and this garbage brand, I bought the Rlaarlo ak 917 carbon fiber version, and the first thing when making the purchase I bought it with fast shipping paying 19 euros more for said shipping, supposedly it arrived in a week, well, lie, it took me 20 days to arrive, when it arrived it arrived with the steering out of adjustment, with one wheel facing one side and the other facing the opposite side, after looking closely at the car I realized that the screw that The connection between the servo arm and the servo horn was loose, and then I realized that one of the two small screws that the servo horn has is missing. In addition, this car has a serious signal loss problem. I am writing to the support. technician of this garbage brand, and until today they have been giving me my time, they say that the missing screw is too small to send it, anyone who buys this car forgets to be able to return it is impossible, they brag that they have good technical support and it is a garbage, just like the customer treatment, I do not recommend products from this brand, it is a waste of money
Nice but just 68km/h?
2S battery with stock gears. Next video, upgraded kit pinion and spur and 4S. That will wake it up 👍🏻
@@RCKickschannel yes 💪
WONT BE HARD TO GET THIS MODEL TO 100+ MPH. even with the stock electics