Totally agree dear friend. This tool upgrades capabilities. But still the manual work is more interesting to me. That is why your work is very special 👍
Great video. But if I could offer one suggestion it would be that you’re using your step clamps incorrectly. If you stand your triangular piece up vertically, you’ll see the teeth of your clamping bar will full engage and more positively lock into the triangular ramp. That’s how they’re machined to work together. Hope that helps and thanks for the video. 👍
Love this machine. Where did you get the upgrade kit and does it come with the circuit board. Could you help me to get started. I have high school cnc training . All I remember I’d G90 and G91. Absolute and incremental. Lol!
1:14 can you tell me about this? On this video there is a huge wriggle (free play) for 2nd axis. Do You have the same ?! it is unacceptable for any kind of precise work
@@miladinseratlic5984 On my MF70 there is little play on the top axis of the XY-table. I've so far made only small test part in the middle of the table and haven't yet investigated if there's something that can be done for that play.
@@TheJamse101 just as I thought... they (proxxon) present their products as high-quality and precise, and the eye can see how much play is on that top axis. Thank You for feedback
Where did you get the motherboard for making connecting the engines and the computer such that you can control the PROXXON MF70 ? Do you have a link for that ? Thank you
Greeting from Maryland Sir, Can you list exact locations for board and software? I procured Proxxon CNC Kit, Nema 17 stepper motor and Fusion 360, but I have difficulty to find circuit board and software though. I like technology, but the technology hates me sometimes according to my children, I felt that it hates all the time. Thank you, Very Respectfully, Bob
Thank you very much Bob! You need to use arduino card for cnc machine. You have alot of information on RUclips about how to setup and control the motor. After that you need to design with fusion 360 and to use cam option to convert the cad files to Gcode. With the Gcode you start create cnc parts. Good luck!
Good day Sir, I am getting ready to order material for this. When I check the Amazon link provided there is a NEMA 17 version and a NEMA 23 Version, Not sure which one I need but as you point out NEMA 17 Steppers I suspect I need the NEMA 17 kit or should I get NEMA 23 steppers? Amazon also recommends a timing Belt but I suspect that is for a 3D printer and not the MF70,
Thx, also I saw in one comment of yours that you are using arduino cnc controls, do you have the link for that too.? I’m just learning CNC and so far the lesson shown here in your page is pretty straightforward
Hello.... I just ordered the kit to convert Proton MF70 to a CNC. Is there any help on how to set it up? I ve asked some question on AMAZON by the seller but got no response. Is this a scam ?
I'm pretty happy with the result. The advantage of this device is that you can milling soft metals like aluminium and brass. But its a small machine for very small parts. About cheap cnc Router, I can not compare to a machine I do not know. Thank you for watching 👍
@@YooProjects thanks i wanna make loveless style knife guards with this tool Now im makig them with hand files but its not as accurate is i want it so im thinking on buyong a tool like this milling machine
@@YooProjects thank you. But I see some kits come with the nema 23 stepper motors but some articles I've read up that the nema 17 motor are equaly as good. I work eith lathes and bench drills ect but just bought myself the proxxen mf70 so I appsalutly nothing about stepper motor specs ect. The kits that they sell on amazon are almost as expensive as the cnc it's self so I'm looking into trying to find the parts individually to see if I can cut the costs. Any info you could suggest would be amazing. Kind regards
@@YooProjects what about mild steel and brass and what power source did you use for the motor and controller like a power supply for 3d printer on Amazon?
@@YooProjects can I use this setup to make 3d piece for diy projects instead of just engraving sorry if I'm annoying I just a total noob on cnc but I know 3d printer well
@@sebastienbleau7870 You can make little parts from wood, plastic, epoxy, brass and aluminium. But you need to learn the how to use mf70, you need to learn the setup of speed on X, Y and Z axis. And how to use right cuting tool for your project. Good luck 🤗
You can find on amazon www.amazon.com/Longruner-Arduino-Professional-Mechanical-LKB02/dp/B072N4FMRN/ref=mp_s_a_1_3?dchild=1&keywords=arduino+cnc+kit&qid=1634220259&sr=8-3 You have a link for upgrade kit aluminum parts in the descripsion. You need this too. Good luck:))
Wow, a marvel of a tool!🤯🤯👌
Totally agree dear friend. This tool upgrades capabilities. But still the manual work is more interesting to me.
That is why your work is very special 👍
Great video. But if I could offer one suggestion it would be that you’re using your step clamps incorrectly. If you stand your triangular piece up vertically, you’ll see the teeth of your clamping bar will full engage and more positively lock into the triangular ramp. That’s how they’re machined to work together. Hope that helps and thanks for the video. 👍
For anyone finding the catchy female vocal song it's "See a brighter day by Gloria Tells"
You're right :)
This is incredible to be able to have at home for so cheap.
The replacement parts you could make with melting, casting and milling at home
I agree.. Although I upgrade my machine to ff 500. Thanks for watching
Love this machine.
Where did you get the upgrade kit and does it come with the circuit board.
Could you help me to get started. I have high school cnc training . All I remember I’d G90 and G91. Absolute and incremental. Lol!
Awesome! I just bought MF70 couple days ago and now I'm going to do the same upgrade :)
Thank you very much. Good luck with upgrade 💪👍💫
1:14 can you tell me about this? On this video there is a huge wriggle (free play) for 2nd axis. Do You have the same ?! it is unacceptable for any kind of precise work
@@miladinseratlic5984 On my MF70 there is little play on the top axis of the XY-table. I've so far made only small test part in the middle of the table and haven't yet investigated if there's something that can be done for that play.
@@TheJamse101 just as I thought... they (proxxon) present their products as high-quality and precise, and the eye can see how much play is on that top axis.
Thank You for feedback
Great! Good job with proxxon
What is the type of driver controller card (minute 4:44) for nema 17?
The card is arduino for cnc milling machine
But what board did you use? You did not linked it. How do you upload code? What software do you use? Please make another video.
The video and the machine are really cool,
I loved the things you did with the machine.
It's beautiful!😊
Thank you sweetheart ❤️
Price 4900 €
Where did you get the motherboard for making connecting the engines and the computer such that you can control the PROXXON MF70 ? Do you have a link for that ? Thank you
You need cnc ardunio control board. you can find kit on amazon with step motor. Good luck:)
Really nice, I loved the machine and the amazing things you did with it👍❤
I really appreciate it. Thank you so much sweetie❤️
Excellent job and nice song!👍👍
Thank you very much. I really appreciate it 💫
Very nice. Where are the links for the stepper motor driver PCB and the software?
Thank you. You have alot of arduino kits on amazon. Software: fusion 360. Motor: Nema 17. Good luck 👍
hello, which electronic card do you use to connect the nemas 17?
what software do you use to drive the cnc? grbl, bcnc?
thank you
Hi Franck,
I used arduino cnc control to connect nema 17, and grbl software. Fusion 360 for cad Filles.
Have a nice day:)
Yoo
@@YooProjects what's the difference of using nema 17 and nema 23?
More power..
Greeting from Maryland Sir,
Can you list exact locations for board and software?
I procured Proxxon CNC Kit, Nema 17 stepper motor and Fusion 360, but I have difficulty to find circuit board and software though.
I like technology, but the technology hates me sometimes according to my children, I felt that it hates all the time.
Thank you,
Very Respectfully,
Bob
Thank you very much Bob!
You need to use arduino card for cnc machine. You have alot of information on RUclips about how to setup and control the motor.
After that you need to design with fusion 360 and to use cam option to convert the cad files to Gcode. With the Gcode you start create cnc parts.
Good luck!
Wow, very cool upgrade!
Thank you mate 👍
Wow!!!!!! Great idea for upgrading...
Thanks dear friend 👍
i love that tool and this music 5/5
Thank you. I really appreciate it 👍
Super cool 😎 the electronic red board is inside the kit?
Thanks 😁. No electronics kit.. You are csn use arduino cnc kit for upgrade the machine. You need nema 17 motor too.
Good luck 💪
@@YooProjects thanks for replying back so quickly.
Love ❤️ your works 💪🏾
A huge compliment. Thank you very much 😊
Good day Sir, I am getting ready to order material for this. When I check the Amazon link provided there is a NEMA 17 version and a NEMA 23 Version, Not sure which one I need but as you point out NEMA 17 Steppers I suspect I need the NEMA 17 kit or should I get NEMA 23 steppers? Amazon also recommends a timing Belt but I suspect that is for a 3D printer and not the MF70,
Nema 17 is Perfect for this project. Good luck and enjoye 👍💫👍
Could you share the grbl config? For example steps per mm etc, and tavel per motor rotation
Sorry, I don't have this information at this moment. But you can find arduino command on the many RUclips channel.
Is there an alternate site for the cnc kit as it shows in Amazon site it’s no longer available?
Try to visit amazon de
Thx, also I saw in one comment of yours that you are using arduino cnc controls, do you have the link for that too.? I’m just learning CNC and so far the lesson shown here in your page is pretty straightforward
You have alot of arduino kit on amazon. Try find kit for cnc machine.
What board did you use to control the stepper motors? also what program did you use?
Hi, Thanks for watching 🌻 i used arduino board and fusion 360. It's very nice cnc machine for small wood, plastic, epoxy mold and thin metal.
Good day
where can I buy the control board for this Upgrade?
thank you for answer
Hi, Thanks for watching. You can buy arduino cnc control for this machine. Good luck 👍
Que tipo de placa controladora has usado? Puedes facilitar el link? Gracias por el vídeo.
I used Arduino cnc kit. Thanks for watching:)
Da para fazer modelos pequenos por exemplo um pingente de ouro com 1,5 cm nela ?
You can do great project with proxxon. But just for hobby. Not professional work.
hey nice work , do us a favour mount your clamps properly
Thanks. The clamps are good
I have the same machine. Can you provide the parameters for Universal G code Sender? Example; $100=?... Can you help?
Hi, in this project I upgrade proxxon mf70 to cnc machine. I am using fusion 360 to convert cad to gcode. Good luck 👍
@@YooProjects thank you, good luck 🙋🏻♂️
Nice! What circuit board are you using? And what software do you use?
Thank you for watching. You can see the detail on the comments.
Bu düzenekten üretiyormusunuz fiyat nedir ve istesek yaparmısınız
Making one unit from this project. Thank you for watching 🤩
TOP. J'ai une MF 70 que je voudrais convertir. Quelles carte de commande utilisez vous ?
Thanks :) I used cnc arduino card, fusion 360 for cad and cam. Good luck !
@@YooProjects Merci pour votre aide. Avez vous fait une vidéo pour la partie électronique et software ?
I estimate it will be in the next cnc machine
what is the actual arduion card model. I cant find one for 3 stepping motors
Search on google " cnc arduino card" you have a lot of option in the market.
Did you buy this as a kit - where from?
No compleat kit to buy. I upgraded proxxon milling machine to cnc. You can found all the details on the description.
Hello.... I just ordered the kit to convert Proton MF70 to a CNC. Is there any help on how to set it up? I ve asked some question on AMAZON by the seller but got no response. Is this a scam ?
Thank you very much for watching. You can buy upgrade kit from aliexpress. And the machine from amazon. You also need arduino cnc kit. Good luck 👍
Would this be more rigid of a setup than a cheap cnc router?
I'm pretty happy with the result. The advantage of this device is that you can milling soft metals like aluminium and brass. But its a small machine for very small parts. About cheap cnc Router, I can not compare to a machine I do not know. Thank you for watching 👍
Can you work on soft steel with this ?
Thanks for watching 😊 Yes! I milling brass and aluminum. But it's take long time to do it.
@@YooProjects thanks i wanna make loveless style knife guards with this tool
Now im makig them with hand files but its not as accurate is i want it so im thinking on buyong a tool like this milling machine
What's the deference this than a normal cnc machine as a desktop cnc machine??
In This case, I upgrade regular milling machine to cnc machine. The original machine was manual.
49 / 5.000
Übersetzungsergebnisse
Übersetzung
And what kind of performance does the power supply have to have?
Hi, Thank you for watching 😊.
I used power supply output, 24 v, 5A for my card.
Could it be used for drilling as well?
For sure. Milling machine more powerful then driling machine.
Bonjour
Est il possible de travailler l’acier inoxydable d’une épaisseur jusqu’à 3/4 mm avec cette fraiseuse Proxxon CNC ?
Not recommended, Only soft material parts.
Which control mainboard used?
Arduino cnc kit
Any chance any. One knows the link for the motors and chip board conversion kit?
You can get kits from Amazon
@@YooProjects thank you.
But I see some kits come with the nema 23 stepper motors but some articles I've read up that the nema 17 motor are equaly as good. I work eith lathes and bench drills ect but just bought myself the proxxen mf70 so I appsalutly nothing about stepper motor specs ect. The kits that they sell on amazon are almost as expensive as the cnc it's self so I'm looking into trying to find the parts individually to see if I can cut the costs. Any info you could suggest would be amazing.
Kind regards
What power source do you use for the controller and motor and can you mill high carbon steel with this upgrade
24v - 5A.
YOU CAN NOT MILL HIGH CARBON STEEL WITH MF 70.
@@YooProjects what about mild steel and brass and what power source did you use for the motor and controller like a power supply for 3d printer on Amazon?
The power source must fit arduino cnc card. No problem to mill brass and aluminium.:))
@@YooProjects can I use this setup to make 3d piece for diy projects instead of just engraving sorry if I'm annoying I just a total noob on cnc but I know 3d printer well
@@sebastienbleau7870 You can make little parts from wood, plastic, epoxy, brass and aluminium. But you need to learn the how to use mf70, you need to learn the setup of speed on X, Y and Z axis. And how to use right cuting tool for your project.
Good luck 🤗
what software or app do you use to command?
Grbl software
What software are you using?
Fusion 360
Muito bom o projeto, está de parabéns. 🇧🇷
Thank you dear man for watching 😊
very nice, thanks for the video
Thank you so much for watching : )
Hi does this mill the steel?
You can mull gently
Wherr can I buy this conversion kit?
Yes, send me a email please: yooprojects1@gmail.com
Is the cnc kit aluminum or 3d printed
Hi, the kit made of aluminum. Thanks for watching 😊
In your link too buy at Amazon is that in all aluminum. I want to buy but not the 3d
Plastic
Yes. The kit is of aluminum. Good luck
Where do buy the kit for cnc
I have one.. I can send you
Excelente, podría solicitar presupuesto o donde la puedo adquirir. Estoy en santiago de chile
Thank you very much. Sorry darling .. I am not selling the machine. You can order the manual version from amazon. Good luck 😊
@@YooProjects ok sólo por Amazon...
@@YooProjects pero usted tiene vende el Sistema CNC para la maquina? Que es lo que usted vende u ofrece o es sólo un pasatiempo?
Its just my hobby 🤩Thank you for watching and interesting my projects 🙏
Can I mill aluminium 10x15cm? Od its to small?
The table size is 200x70 mm( 20x7 cm). Try to fit to table size.
Where do you have buy the software
Free software.. You can design cad files with fusion 360, and for cam( gcode) I used grbl software (for free).
Thanks for watching:))
Hello, the software was no problem to get.
Where can i buy the whole cnc set thag you use.
You can find on amazon
www.amazon.com/Longruner-Arduino-Professional-Mechanical-LKB02/dp/B072N4FMRN/ref=mp_s_a_1_3?dchild=1&keywords=arduino+cnc+kit&qid=1634220259&sr=8-3
You have a link for upgrade kit aluminum parts in the descripsion.
You need this too.
Good luck:))
I am new with this tool, Is that the whole set what i need, and pluch and play...
I saw your video and it looks easy to buld.
You need experience with Arduino.
Thanks a lot ! I subscribed :)
Thank you for watching 🙏
Musik Videos schau ich im Fernsehen😳
Ich freue mich, dass dir das Video gefallen hat 🤩
Jakiego oprogramowania używasz?
I use fusion 360 for cad and cam. For gcode I use grbl.
Which controller and software did you use?
Hi Mat,
Software for cad and cam: solidworks or fusion 360.
Controller :arduino for cnc.
Thanks for watching 😊
Thanks sir@@YooProjects
Which firmware on the arduino cnc board though?@@YooProjects
How much does it cost for upgrade?
It is difficult to answer because it depends on where you buy the parts. I for example had motors and electronics in the house
Nice toy :)
Thanks
Dove si può acquistare il kit?
You have a link on the descripsion. From aliexpress. Good luck:)
che sceda hai usato dove la trovo
Arduino card for cnc milling machine. Search on google, or amazon.
Good luck:))
Very cool I want one.
Wow .. a huge compliment my friend. Thanks for watching 🤩
What is controller model?
Arduino with cnc kit.
1:14 what a wriggle (free play), dear God! Does no body see it ???
You use GRBL ?
Yes. Very simple to use and for free.
@@YooProjects Thanks bro !
Price
Sorry, not for sale. Thank you for watching
How is the tolerance?
Hi, thank you for watching. The tolerance is +/- 0.1
Excellent
Thank you 🙏
very nice !!! waiting to see new project with that machine. סחתיין
Thank you. The next project is in the oven:)
More info on how to….. awesome though…..
marks
Good video
Full suport
Lets be friend👌
Thank you dear man and welcome 👍
Mandelholz ist weich
Truth . Thanks for watching :))
That music needs to go
Hi, where to buy that control board?
Thanks for watching. Try to look on Amazon. Arduino cnc controller. Good luck 👍
@@YooProjects and you think why did Proxxon use NEMA 23 instead of NEMA 17 in the original CNC version?
@hypertool35 proxxon used Nema 23 for ff500 cnc machine. Nema 17 good for this miniature cnc machine