Thank you so much for this video… and for the lights turned off idea! I had to also place scotch tape on the lines but I got it to work! Thank you again!
Such an awesome tutorial. My niece just asked me to make some jibits and this has helped so much. I looked through your other videos but couldn’t find anything showing how you find these images. Could you explain or point me to your video? Thanks you so much. My niece will be so happy
@@goochiemadeit9067 Great Vid! I subscribed Did you do a video of how to get the images? I know you said you would if asked. I ordered everything you said last night. Should be here today.
This is an excellent idea and good tip about turning off the lights during the cut. It would be very nice if you could provide links to where to buy the supplies, button backs and printable shrink film. THANK YOU.
Hey thank you so much sis do you mean like how to find and remove the background if so in my diy hall pass video I show two ways to do that it's my most recent video
Do not use E 6000 because it does not stick to the croc charms back, it doesn’t stick to the little piece that you’re glowing onto your actual charm. I learned that the hard way after I made an entire tray of them last night😅
Did you allow the E6000 glue 24-72 hours to dry? I just used E6000 after attempting UV resin but that just broke off. Unsure if since I didn’t use the clear back pieces it didn’t cure all the way which caused them to break off or what. But I’ve had mine sitting for a little over 24 hours. I attempted to put the Mr. Clean charm on and snapped his head off but the back stayed on. I attempted to put another charm on but the backing did lift up. So I’m assuming that one didn’t cure long enough. I redid it & going to wait another day or 2
@@amykathryn7700 yeah this was a while ago that I had tried it but E 6000 does not last if you use it on the little silicone shoe charms. It might feel like it does but it falls apart pretty quickly and yes, I had let it thoroughly dry.
@@goochiemadeit9067 thank you, that was a quick response! I noticed that the charms were thick. Was that the shrinking sheet expanding as you mentioned? What are the bottoms called?
I love your video! You made it so simple! Did you only have to use the 1 sheet when making your charms? I’ve seen other take 2 images and glue them together but yours look pretty thick by themselves.
Def take the lights off or use matte tape over the registration lines. If not, then the machine can't detect the registration lines and you will get an error Taking the lights off helps take the glossy/shine off the paper. I should have referred back to this vid when I did may test run today lol would have shaved me so much time lol Thanks again for a great vid!!!
New to this. Sorry the silly question. Do you print on the printable vinyl and then add it (printable vinyl images) to the shrink film. Then cut on the Circuit machine?
Hello I have a friend who works at UPS store can you do something like that in charms and she drive a Tesla. So maybe a Tesla clog charms…this will be a great gift for them..
Hey, I’m sorry please excuse my ignorance. Did you print on cricut or a regular printer? I have both but wasn’t sure what was used in this video or if both was used. Did you add the shrink film to the cricut and only used the cricut?
One more question I was looking for the video on how you got those pictures? Is there a video on that or a certain picture(image format) I have to use?
Hi, this is a great video. Thanks for tip about the lights off. I clicked the link for the shrink paper but it’s no longer available. They have another option ( same company ) but it has 6 white sheets and 6 semitransparent . What’s the difference ? Is there another brand you suggest ?
Hi, the one I linked is the only kind I've used that is printable unless you use shrinky dinks that you can draw on if you would like to make your own design.
@@goochiemadeit9067 yes I printed on the frosty side. Iet dry, and days later ink still smeared. I’m going to try and just put a coat of Matte modge pod
Hi: I loved your video. It was helpful. I have watched plenty of videos on how to make charms. Your way is definitely the best so far. Do you have to use the shrink sheets or can I use regular printable sheets? I look forward to more videos.
A tid bit ive learned is the use a sander to sand down the actual button, it helps whatever type of glue you use adhere better including e6000
Thank you so much for this! I haven’t left my safety zone of t-shirts this gives me something new to try!
this tutorial was fabulous! thanks for sharing. i user your tutorial to make memorial jibbits for my doggy that just passed away. thanks again!!!
Thank you so much and I'm sorry for your loss.
thank you@@goochiemadeit9067
Thank you so much for your tutorial! Please more videos on cricut tips. I’m new to the cricut world and I really want to learn 😊
Thank you so much new videos coming this week
I would love to know how you made the beer pictures
Cuuuuteeee!! I love a short sweet to the point tutorial! Thank you for sharing this; Subscribed 😍
Thank you
You made it simple and easy!!! Thanks
Thank you so much for this video… and for the lights turned off idea! I had to also place scotch tape on the lines but I got it to work! Thank you again!
No problem I'm glad you got it to work 😊
Such an awesome tutorial. My niece just asked me to make some jibits and this has helped so much. I looked through your other videos but couldn’t find anything showing how you find these images. Could you explain or point me to your video? Thanks you so much. My niece will be so happy
Hi, in my new video I show how I find my images and use canva
@@goochiemadeit9067 Do you have the link for the video on how you do the images? I cant find it. Thanks!
Hi! How did you find shrink paper that isn't clear? I make all kinds of croc charms, and I just got an OG cricut, but I don't know how to use it yet.
I'll def try cutting rhe lights off I can never cut using glossy paper
Try putting tape on the edges
Could you do a video on how to find the designs
Hi, yes I can.
Crocs or Frocs haha thanks for the laugh and for sharing this vid!
Hi! Did you ever make the one with the resin? If not could you please? I would love to see it!
Thanks for this video 😁 Adding links would be great and yessss please make another video with the steps to charms. Thanks again 🙋🏻♀️
Hi I updated the description box to include links to the products.
@@goochiemadeit9067 Great Vid! I subscribed Did you do a video of how to get the images? I know you said you would if asked. I ordered everything you said last night. Should be here today.
This is an excellent idea and good tip about turning off the lights during the cut. It would be very nice if you could provide links to where to buy the supplies, button backs and printable shrink film. THANK YOU.
Hi I updated the description box to include links to the products.
Yes would like to see video using uv
@@veronicatrevino6000 I have short I uploaded that shows the uv resin charms I made teacher charms
Where? I checked buy I don't see them.Only save by bell clip
@@veronicatrevino6000 it shows them with uv resin on them and should be one with me putting it on them as well unless it was removed
great tutorial! keep up the great work!!
Thank you so much 💓
Thank you for this video ‼️ Very informative🥰
Very very nice. Thank you for sharing Sister Queen. Yes please if you do not mind making a video on uploading your images.
Hey thank you so much sis do you mean like how to find and remove the background if so in my diy hall pass video I show two ways to do that it's my most recent video
Can you make a video about finding your designs and any tips you have?
Super neat! Never seen these made before. I would like details on how you get the pictures?
Thank you I made a hall pass video on my chanel and I show how I search for images and remove the background
What do u expect this is ms gooch if u expected less then get out 😐
Great Vid🌹 Cricut is expensive but you don’t get what you pay for. I wish I had spent that money on a silhouette
Thank you and I agree but I use it for alot of different stuff too
Do not use E 6000 because it does not stick to the croc charms back, it doesn’t stick to the little piece that you’re glowing onto your actual charm. I learned that the hard way after I made an entire tray of them last night😅
Is there a better glue you recommend ?
@@jamiedelatorre1908 Nope, I also tried Gorilla glue and it didn't work...maybe hot glue is the way to go, but I haven't tried that yet.
Did you allow the E6000 glue 24-72 hours to dry? I just used E6000 after attempting UV resin but that just broke off. Unsure if since I didn’t use the clear back pieces it didn’t cure all the way which caused them to break off or what. But I’ve had mine sitting for a little over 24 hours. I attempted to put the Mr. Clean charm on and snapped his head off but the back stayed on. I attempted to put another charm on but the backing did lift up. So I’m assuming that one didn’t cure long enough. I redid it & going to wait another day or 2
@@amykathryn7700 yeah this was a while ago that I had tried it but E 6000 does not last if you use it on the little silicone shoe charms. It might feel like it does but it falls apart pretty quickly and yes, I had let it thoroughly dry.
How thick are the charms? I want to try and make some for earrings instead of crocs
Hi, I don't have the exact measurements for how thick they are
Thank you very much
Thanks for the video! The link to the buttons is not working.
You're welcome the links have expired you can just search for them on Amazon shoe charms
@@goochiemadeit9067 thank you, that was a quick response! I noticed that the charms were thick. Was that the shrinking sheet expanding as you mentioned? What are the bottoms called?
@@veronicaramirez5686 yes the sheet gets thick and hard once baked and I believe buckle plastic buttons
I love your video! You made it so simple!
Did you only have to use the 1 sheet when making your charms? I’ve seen other take 2 images and glue them together but yours look pretty thick by themselves.
Thank you so much I only use one sheet
Thank you! Helpful video.
Thank you for sharing. Cute idea
🥰
Thank you so much
Hello, are the sheets thin? They look thin when you printed it but once you are making the croc charms they look kinda thick. They look amazing.
Hi, they are until you bake them they thicken up
wait what paper did you use ? reg circut paper
Hi, no it in the video printable shrink film
How thick are the charms when they are done. The paper look thin but looks like they got a few mm thick after it came out.
Not sure about the exact thickness but it thickens once cooked
@@goochiemadeit9067 ok great I wasn’t sure if it would stay paper thin after
Can I make them with my air fryer
Yes just watch your temp settings
@@goochiemadeit9067 what is the temp
What pAper u use
@@izamarlopez9862 printable shrink dinks
@@izamarlopez9862hi, it's on the packaging when you order it I think I said it in the video
Hi can you use cooking plastic paper as well
Hi, no you can't
Did you use regular ink to print your image or sublimation ink?
Hey love regular ink
That was awesome!
Thank you 😊
Have you found a bigger pack of the sheets ?
Hi, no the biggest I have found is 25 sheets and I put the link to purchase them in description box.
@@goochiemadeit9067 i didnt find that one but wish they had a bigger option😭
@@juanitafarfan6031 I know because they go so quickly
@@goochiemadeit9067 which oven do you use ?
@@juanitafarfan6031 a toaster oven but you can use a regular oven too
Def take the lights off or use matte tape over the registration lines. If not, then the machine can't detect the registration lines and you will get an error Taking the lights off helps take the glossy/shine off the paper. I should have referred back to this vid when I did may test run today lol would have shaved me so much time lol Thanks again for a great vid!!!
You're welcome 😊
New to this. Sorry the silly question. Do you print on the printable vinyl and then add it (printable vinyl images) to the shrink film. Then cut on the Circuit machine?
Hi, no print on printable shrink film
Thank u
When adding the shrink paper to your printer is it shiny side down or paper side down?
Depends on your printer but make sure you are printing your design on the matte side
yes video please on how to make them shiny
What printer Did you use
Hi, inkjet printer
Love the tip! Thank you
One question, so you print from your regular printer first or print from the Cricut? I’m a newbee
Hi, print from cricut if you want to cut yourself print from printer
What print on please
Inkjet
Awesome video!!! What size button back s do you use? There are a few sizes 0.8cms all the way to 1.3cms. Thanks in advance!
Great video! Just one question, Now can I do all this with the smaller cricket machine?
Hi, with the Cricut joy you can't do print then cut but you could cut traditional shrink film down and cut out shapes
hi do you print on the shiny side or the paper side?
Paper side
What paper type did you use to print on the shrink sheets?
Shrink dink paper
What type of printer do you use if you don’t mind me asking ❤
Hi, hp 3755 for regular prints
So when we cut it, is that when we use the shrink paper?
Hey yes cut it then cook it and you're all done
Hello I have a friend who works at UPS store can you do something like that in charms and she drive a Tesla. So maybe a Tesla clog charms…this will be a great gift for them..
Hi, I'm not taking custom orders at the moment
Hey, I’m sorry please excuse my ignorance. Did you print on cricut or a regular printer? I have both but wasn’t sure what was used in this video or if both was used. Did you add the shrink film to the cricut and only used the cricut?
Hi, use a regular inkjet printer to print on the film then use the cricut to cut out images using the print then cut feature
One more question I was looking for the video on how you got those pictures? Is there a video on that or a certain picture(image format) I have to use?
@jalynn mays I show how get pictures in my notebook video but I prefer png images
Thank you. Going to watch and like now!
Hi, this is a great video. Thanks for tip about the lights off. I clicked the link for the shrink paper but it’s no longer available. They have another option ( same company ) but it has 6 white sheets and 6 semitransparent . What’s the difference ? Is there another brand you suggest ?
Hi, the one I linked is the only kind I've used that is printable unless you use shrinky dinks that you can draw on if you would like to make your own design.
So do you use the transparent ones or the white ? Or does it matter ?
@@kharikreations9352 the one I used was white as long as it says printable you should be able to use them
Hi. Are the images that you uploaded transparent?
Hi yes
Thank you so much for the video! But I’m jwing, if you leave it matte will the ink from the picture come off?
the ink dries while in the oven so it won't come off
@@goochiemadeit9067 thank you 🥰
How long were they in the oven?
3 mins but keep an eye on them
How long to keep in oven?
Hey 2-3 mins just keep in eye on them
What kind of paper did you used?
Hey love I used shrink plastic I put links to all the supplies in the description box
I tried making them but the ink Smeared do you seal them? If so how.
Hi did you print on the correct side? I've only experienced that when I printed on the wrong side
@@goochiemadeit9067 yes I printed on the frosty side. Iet dry, and days later ink still smeared. I’m going to try and just put a coat of Matte modge pod
@@LadyVilian let me know how it turns out
Hi: I loved your video. It was helpful. I have watched plenty of videos on how to make charms. Your way is definitely the best so far. Do you have to use the shrink sheets or can I use regular printable sheets?
I look forward to more videos.
Hi, thank you and yes they have to be printable shrink
This was good. I just had a client request her business logo!
Do you print on glossy side or the paper side
Hey love paper side
Thank you
I’m trying to start my business on this
Do we have to use the cricut?
Hey no you can cut it yourself
The link to the buttons does not work
It's old just search for black plastic buttons or Jibbitz backings
Ok! Thank u!
@@keishawalton64 you're welcome 😊
Are u using sublimation ink or regular inkjet ink?
Hey regular inkjet printer
Man I cannot get my machine to print n cut it cannot pick up the outside lines 🤦🏽♀️
Hey love try it with the light off and if not contact cricut to troubleshoot if that doesn't work they may send you a new machine
Sometimes I add a strip of school glue stick on the lines to take the sheen away
Recalibrate your machine it will work...let me know who it turns out...
Thats ur problem 🥰
Does it work for you
That’s cool
Hi Ms. Gooch
Thank you
What type of printer do you use
Hi, inkjet printer
@goochiemadeit9067 is there a brand if printer that should go good for the shrink sheets
@cookingortiz5561 no any inkjet printer will work