Thank you so much for this video. I’ve been watching it and taking notes waiting until Sunday rolled by so I could finally install my rack. 9 hours later and it’s done lol. Now for an alignment shop and to find someone with a VAGCOM. I wouldn’t have been able to do this and save myself a few thousand dollars without you. Thank you so much
Thank you for posting. My 2016 Q5 threw a code indicating steering failure, now I know what my shop technician is talking about when he said the rack has to be replaced. The sensors or the motor built in the rack must have died on my car. It is good to know what the mechanic needs to do to fix my problem.
Does the rack program itself? Im about to do mine. Was wondering if the turning the wheel method actually works or will i need to get it programmed. Its a rack from anothet audi, i assume its already coded?
socal213323213 what were your symptoms when you cracked? I think I just did because my steering became really loose after I hit a big bump while being low.
Hi I have been watching a lot of you're videos I have a 2016 audi A4 car was driven on flooded streets, steering rack control unit got few drop of water in it. Got it out dropped to ECU repair experts after checking the unit out it seems perfect no burns no nothing. Still error code on my car and steering is crazy hard impossible to even park the car off the streets
Amazing video I think this is one of the easiest rack replacement I have ever seen Some cars you have to remove so many things to be able to remove the rack is crazy I have a question though Where did you get the rack and how much was it I don't need one but I am curious on the price I have searched a few places and is not available Even though is electric steering is still called rack and pinion no???
Is it similar or is it different when you change the steering rack in a Audi A4 B9? Because I have to do it because the car mechanics says that it is the rack that is the fault. And do you need to code it after and what happens if you don't code it? 😃
dear i had a flood in my area and had to change my steering rack to a used one. i have Audi A6 2012 and i replace the steering with an A7 which is compatible after checking with Audi Dubai. now the problem after doing the programming, the computer did not recognize the part and couldn't activate my steering rack. any idea what is going on. thx
look. This guy is awesome. It takes 20 minutes, tops, to change that. And how much it actually cost in any other service? they will say it takes 3-4 days to do the job
Hey man, great video. Understand you are rushing thru for the sake of time of the video. Don't some of those bolts need to be tighten via torque wrench? Also some of those bolts are stress bolts and one time use only. I changed my cross support beam that you removed at minute 4:45 in video with an aftermarket Alu Kreuz one piece and had put in all new bolts and tighten with a torque wrench. Anyway, today after driving thru a flooded street I got "Dynamic Steering System Fault" with a yellow steering icon on dash. Message on dash said it was OK to continue driving which I did home for 30 miles local and highway. I saw on some forums that people just changed the steering control module and it worked. I saw from your comments that, this may or may not work. How hard is it to change that module on the rack?
On display my steering rack icon is red, because car damaged and steering rack break, how can i hide this red icon on display, when replace steering rack? i don't want to block new one, Thanks
Good job. My friend. When you change your rack what's the reference is important the steering rack reference or the electronic module. For an Audi A7 3.0 TDI 2013
That was awesome to watch. I am not a mechanic by any means and to watch you work makes me feel like I could follow your video and do the job of an expert. One question. Can I use the same format on a Audi A7? My fault steering light has come on. I took it to the dealer and received a print out that I need steering rack and inner/outer tire rods replaced for a whopping $4600. I could most likely purchase the parts for $3300 from dealer saving me around $1300 to do it myself. Any suggestions?
If you still didn't pay $4600 to a stealership go find a low mileage hit car from rear only from an online salvage yard. I got my used rack with 30K miles for $350 shipped. (www.getusedparts.com/) Hope you don't have dynamic steering because most used racks on the market did not have that option. Another tip: If you get the VIN from salvage website or via phone etc you can google it and maybe able to see the accident pics under google images. That's how I confirmed that my donor car was totaled from rear and not a scratch front of firewall. I am lucky to live an hour drive from Edgemotors and they installed it at a good labor charge.
Excellent job. Looks like they did a great job with the engineering on this vehicle. My steering rack is much harder to get to, and has four bolts facing up towards the engine. :( Why Toyota, why?
I have an audi a5 2015 changed the steering rack but error on screen do not drive steering defective, steering doesn’t even move anywhere,what should i do is this a faulty steering rack or do i have to program it?if anyone can help here please
Great Video, Thanks very much. After fitting the rack, did you have to get the new rack coded to the vehicle? I fitted used rack, worked great fault changed from red to yellow and steering alot lighter to turn. Yellow warning went off after learning the steering positions. The used rack lasted 2 weeks to the day, then the dreaded red warning light came back on! Any ideas why this happened? Coding? Also when using the snap on scanner it asks for a CH code (F-0000) do you know where to find this 4 digit code? Thanks again
I need to do this to my 2012 A4. I have 2 shops telling me that the control board is VIN locked to the car, and that a used rack is impossible. How did you make a used rack work with the computer?
When looking for a used replacement what numbers must match in order to code correctly. Looking at mine I see 3 different numbers by the connectors. Would all these numbers have to be the same on the replacement?
When I took mine for replacement I was told that my car keeps rejecting other power steering and it needed programing,it took that mechanic 6 month's to get my car done.
And one thing i want to ask.my car is 2.0tfsi engine.2012.acceleration is very low till the 20-25 kmh.after 20-25kmh it accelerate well.generally it thinks when u accelerate.what can cause to this?the computer diagnostic cant find any problem.
good video an info always learn some thing from you need more videos to show if you can specially some on your tools please if time allow thanks and cheers.
Hi mate,i have 2013 audi a6 2lt tdi,a light comes on and says "steering faulty". Looked into it and sensor might be the problem,can this be changed or has to be the whole steering rack be changed? Cheers!
Did u replace this because of the steering defective message ? Dose it have to be reprogrammed ? My 2013 Audi A4 has that message wondering if this is the fix for it ?
ehsin sabir its not about how long you work on cars, its about how much you want to know them... im not working a long time on cars period... but its my hobby...
Hi i just watch this replacement video and i a few quuestions: 1. How different is the steering rack from a 2014 Tiguan? 2. Is that all the "programming" routine you need to do??? Do i need vag-com or something like that? I need to replace mine and i appreciate any help. Thanks for your time to answer!
Thanls for the video it is great help. I am going to install a new electric rack as mine is faulty. Wanted to check if i'll have to do paramiterization thru SWM aswell or only basic settings. I can do basic settings thru ross tech but for software or paramiterization will i have to take it to dealer?
Edge, after watching this video I am going to help a friend out with a dealership diagnosis bad rack. Is the 2013 and 2015 A4 rack the same and any idea where I can find a used rack?
Hi.i have a problem.i have an audi a4 2013.water went into my steering rack and now it doesnt work.is it posibble to replace the inside it or i must teplace the hole rack.and how does it cost a used one?please give me wide infırmation.thank you.please i will wait your answer
+Anar Qasımov the internals are not sold separately, i you want i have a bad rack with good computer, but most likely it will not work due to allot of other electronics inside the rack. used rack is 500-800 . good luck
İ found one.it was new.but outside was kracked while carring.i put the inside part of it inside mine.but it dosnt work again.what can u adwise me.please.its hard to find used one in my country
Is an ODB reader/scanner required to perform this job? My car has the "Steering defective - Do not drive" message. The dealer said the rack was defective. I've ordered a used rack and want to attempt replacing it myself. Should the Steering defective message go away after relearning the steering messages or will a ODB/Vagcom tool be required to clear that?
Hi my 2012 Audi A6 2.0 has been showing steering defective. The steering wheel is very hard to move on slow speeds. What can it be? I bought it like this. I’ve been reading and I’ve been getting either replace the whole rack or others have said to get it software updated at Audi. What is the solution? Please help me
Thanks for the effort in making video, but I can help but mention that the way it’s performed is unprofessional for these cars. Using power tools for tightening those subframe brace bolts is a baaad mistake, especially those front triple squares which go into aluminum. There’s no even appearance of a torque wrench and specs for any bolts. Needless to say that those are stretch bolts and need to be replaced every time you take subframe brace off. Pushing the bolts through the rack to put it into place is a bad idea too as you damade the threads and scratch off zink layer making them rust later and being a torture for the future mecharnic to take out. You’ve got the job done but rather poorly. I leave it here for the other people to be aware that this is not the way to do it right and may lead to potential damage. And btw you cannot turn steering shaft since it’s locked by the lock on the column, so there’s no need to worry about the angle sensor’s ribbon cable.
Hi Bro... Please I need your help,yesterday I drive my car through water and now I am getting noise from the steering wheel when I am turning right and left ... they told me that I need to change the power steering box !, could you assist me please.
@@EDGEMOTORS Hey please help I have a 2014 s4 with dynamic rack can you help me find the part number for it ?? And after installing it do I have to code it??
My car is the same. Why did you replace? Was the steering stiff? Dealer told me my rack was bad. I’m putting in a replacement like you did. Was your problem fixed after you did this? Did you need a recoding? Just curious what I should expect. Would my red steering wheel light go off or need dealer assistance? Thanks
Mine was crashed too. I’m just curious if the replacesment will fix my issue of no steering at all. Was your steering fixed right after installation? Or did you need dealer help? You did a nice job showing this. Good work.
Brian Wollner yep. Got in a little accident passenger front. Electric steering was out and steering indicator light came on. Ran codes at the dealership it pointed to rack and pinion assembly. Replaced it at my local German shop with a used one I found on eBay. Steering is no longer stiff. If anything a bit looser. But now the car is giving me all type of codes (which is why I ended up here). Codes I got after replacement was ESC/TPMS and headlight angling malfunction. I think something was done wrong during the rack replacement when putting the new one back on and positioning the steering wheel straight. Already did an alignment and that didn’t fix the issue. My steering is off center STILL.
hey boss, i replaced my rack and despite the steering wheel being straight the rack itself was not as it was used. anyway i can find out when the rack is straight using vagcom remove the steering wheel and than go back and straighten the steering wheel and than reconnect the shaft? at the moment i am unable to find a way to check dead center for the rack.
Hey man I have the same car as you and my car has a code come up that says steering defective do not drive car and my car does not start, the starter just clicks. I hooked up vag com and got a couple codes one was a no communication with the steering control module and the other was no communication with the steering angle sensor. Do you think that that means my steering rack is bad?
May be your battery is low? It would start to disable modules in the car if not enough power... that’s where the no communication codes could come from
recently had my audi a3 rack changed but since new rack the steering seems heavy and the steering does not self centre. its way more heavy than before and if i fully lock steering the steering will just keep going that way. does it need calibrating do you think? any ideas would be great
Did you replace the subframe. Huge crack in drivers side that’s the protection for rack n pinion Makes no sense. Very dangerous. If you replace it then why not explain damage and reason
Please i have one last question.may car is 2.0tfsi.i have found o steering rack.but it is on the 3.0tdi engine car.is there any difference between this racks?please i want to know before to buy.pleae give me just an answer.i need help
Hy guys am looking for assistance in diagnos my Audi B8 steering rack da light in da panel is red nd I tried almost 4 steering rack bt it's not changing pls help
can you give me any kind of numbers, the electric steering stopped working because i drove over a puddle of water, now i cant find a used part anywhere and the brand new one cost 2k+
You did use the same subframe and it’s a huge crack. Explain why you used the broken subframe on the reinstall Doing the same had undercarriage and same side cracked. Replacing it. That is not o e m. Safe. Why not tell your client and make home replace used part 200
Computer diagnostic says the sensors inside the rack doesnt work.and the brain of it.we are not so lucky, because we doesnt have such good masters as u
+Anar Qasımov see like i told you, there are allot of other electronic parts in there.... so could of gotten damaged. but you have to make sure you relearn it. allot of times it would say that some sensor is bad just because is is not calibrated properly.... so try to calibrate it several times and see what happens.
This video saved me from a 4k estimate from my local mechanic. I did the job myself from a salvage part for 500 bucks. Cant thank you enough!!!!
That was very informative and perfectly edited. Hard to find videos with such good instruction and pacing!
Looks like Audi finally figured out a good place for a rack... thanks for posting the video!
Thomas EXOVCDS
I second this. In the B7s ans b6's is a pain in the ass omg.
Thank you so much for this video. I’ve been watching it and taking notes waiting until Sunday rolled by so I could finally install my rack. 9 hours later and it’s done lol. Now for an alignment shop and to find someone with a VAGCOM. I wouldn’t have been able to do this and save myself a few thousand dollars without you. Thank you so much
Hey man . After you got it programmed did it act up again in a couple of weeks or no?
It should not… if done correctly:)
Thank you for posting. My 2016 Q5 threw a code indicating steering failure, now I know what my shop technician is talking about when he said the rack has to be replaced. The sensors or the motor built in the rack must have died on my car. It is good to know what the mechanic needs to do to fix my problem.
Thanks edge. I enjoy the confidence you have working on all the cars in your vids.
Does the rack program itself? Im about to do mine. Was wondering if the turning the wheel method actually works or will i need to get it programmed. Its a rack from anothet audi, i assume its already coded?
awesome video. you've helped me so much with the clear instructions and tips on what to watch out for.
Gotta say, amazing work man, from one tech to another, you're good!
socal213323213 what were your symptoms when you cracked? I think I just did because my steering became really loose after I hit a big bump while being low.
Very very clean and straight forward. Love it!
Amazing and informative video, you should have a tv show seriously.
Hi I have been watching a lot of you're videos I have a 2016 audi A4 car was driven on flooded streets, steering rack control unit got few drop of water in it. Got it out dropped to ECU repair experts after checking the unit out it seems perfect no burns no nothing. Still error code on my car and steering is crazy hard impossible to even park the car off the streets
What are the codes?
Amazing video
I think this is one of the easiest rack replacement I have ever seen
Some cars you have to remove so many things to be able to remove the rack is crazy
I have a question though
Where did you get the rack and how much was it
I don't need one but I am curious on the price
I have searched a few places and is not available
Even though is electric steering is still called rack and pinion no???
Is it similar or is it different when you change the steering rack in a Audi A4 B9? Because I have to do it because the car mechanics says that it is the rack that is the fault. And do you need to code it after and what happens if you don't code it? 😃
dear
i had a flood in my area and had to change my steering rack to a used one.
i have Audi A6 2012 and i replace the steering with an A7 which is compatible after checking with Audi Dubai.
now the problem after doing the programming, the computer did not recognize the part and couldn't activate my steering rack.
any idea what is going on.
thx
Goooood work man 🎉
Hello from france
look. This guy is awesome. It takes 20 minutes, tops, to change that. And how much it actually cost in any other service? they will say it takes 3-4 days to do the job
Hey man, great video. Understand you are rushing thru for the sake of time of the video. Don't some of those bolts need to be tighten via torque wrench? Also some of those bolts are stress bolts and one time use only. I changed my cross support beam that you removed at minute 4:45 in video with an aftermarket Alu Kreuz one piece and had put in all new bolts and tighten with a torque wrench.
Anyway, today after driving thru a flooded street I got "Dynamic Steering System Fault" with a yellow steering icon on dash. Message on dash said it was OK to continue driving which I did home for 30 miles local and highway. I saw on some forums that people just changed the steering control module and it worked. I saw from your comments that, this may or may not work. How hard is it to change that module on the rack?
Thanks for making this video, I need to replace the rack in my B8.5 S4 (2015) with dynamic steering. Any suggestions on Where to source it used? TIA
Car-parts.Com
Great job mate. Congrats! -- What type of camera did you use for this video?
On display my steering rack icon is red, because car damaged and steering rack break, how can i hide this red icon on display, when replace steering rack? i don't want to block new one, Thanks
Good job. My friend. When you change your rack what's the reference is important the steering rack reference or the electronic module. For an Audi A7 3.0 TDI 2013
2013 Q5 Steering defective Do not drive. Possibly water damaged. Currently at dealership awaiting the bad news. I may need to pay you guys a visit.
That was awesome to watch. I am not a mechanic by any means and to watch you work makes me feel like I could follow your video and do the job of an expert. One question. Can I use the same format on a Audi A7? My fault steering light has come on. I took it to the dealer and received a print out that I need steering rack and inner/outer tire rods replaced for a whopping $4600. I could most likely purchase the parts for $3300 from dealer saving me around $1300 to do it myself. Any suggestions?
If you still didn't pay $4600 to a stealership go find a low mileage hit car from rear only from an online salvage yard. I got my used rack with 30K miles for $350 shipped. (www.getusedparts.com/) Hope you don't have dynamic steering because most used racks on the market did not have that option. Another tip: If you get the VIN from salvage website or via phone etc you can google it and maybe able to see the accident pics under google images. That's how I confirmed that my donor car was totaled from rear and not a scratch front of firewall. I am lucky to live an hour drive from Edgemotors and they installed it at a good labor charge.
@@tekink8143 great idea. Thanks.
Excellent job. Looks like they did a great job with the engineering on this vehicle. My steering rack is much harder to get to, and has four bolts facing up towards the engine. :( Why Toyota, why?
I have an audi a5 2015 changed the steering rack but error on screen do not drive steering defective, steering doesn’t even move anywhere,what should i do is this a faulty steering rack or do i have to program it?if anyone can help here please
Hey man, i know this was a while ago, but I’m having the same problem right now. Have you ever figured it out? Does it have to be coded?
Great Video, Thanks very much.
After fitting the rack, did you have to get the new rack coded to the vehicle?
I fitted used rack, worked great fault changed from red to yellow and steering alot lighter to turn. Yellow warning went off after learning the steering positions. The used rack lasted 2 weeks to the day, then the dreaded red warning light came back on!
Any ideas why this happened? Coding?
Also when using the snap on scanner it asks for a CH code (F-0000) do you know where to find this 4 digit code?
Thanks again
Try scanning with a different scan tooll...
@@EDGEMOTORS did you have to code your steering rack to the vehicle? or should you code it?
Thanks
Hey bro did you end up coding it ? Did it work good after ?
^^
I would also like to know if coding is needed
I need to do this to my 2012 A4. I have 2 shops telling me that the control board is VIN locked to the car, and that a used rack is impossible. How did you make a used rack work with the computer?
When looking for a used replacement what numbers must match in order to code correctly. Looking at mine I see 3 different numbers by the connectors. Would all these numbers have to be the same on the replacement?
Any coding have to be done after a swap? Hoping a regular garage can do the swap and not Audi.
They are a joy to replace compared to any 2.7 TT with automatic trans. Don' you think
V10PDTDI i guess you understand me :) WITH 2.7T RACKS...
When I took mine for replacement I was told that my car keeps rejecting other power steering and it needed programing,it took that mechanic 6 month's to get my car done.
Oh well
Thanks cracked mine on a exposed manhole (lowered life) :(
And one thing i want to ask.my car is 2.0tfsi engine.2012.acceleration is very low till the 20-25 kmh.after 20-25kmh it accelerate well.generally it thinks when u accelerate.what can cause to this?the computer diagnostic cant find any problem.
Is the same for an Audi q5
I replaced the steering rack. Now codes are coming up that wasn’t there before. EPS/TPMS and headlight.
good video an info always learn some thing from you need more videos to show if you can specially some on your tools please if time allow thanks and cheers.
Hi mate,i have 2013 audi a6 2lt tdi,a light comes on and says "steering faulty". Looked into it and sensor might be the problem,can this be changed or has to be the whole steering rack be changed?
Cheers!
You know if you can replace the control module only ?
Hi. Witch numbers has to be mach when you change the electric steering rack?
do you think it's possible to replace just the computer module for a 2012 Audi A6? I have a code for intermittent connection with the sensor motor.
I wish I know specialist like you. I have no luck for mechanics.
Did u replace this because of the steering defective message ?
Dose it have to be reprogrammed ?
My 2013 Audi A4 has that message wondering if this is the fix for it ?
I have been watching a few of your videos. I gotta say u no ur stuff on vags man. Top work. How many years have u been working on vw audi?
ehsin sabir its not about how long you work on cars, its about how much you want to know them... im not working a long time on cars period... but its my hobby...
EDGEMOTORS i like it. U show good pride in your work
ehsin sabir i try my best...
Hi i just watch this replacement video and i a few quuestions: 1. How different is the steering rack from a 2014 Tiguan? 2. Is that all the "programming" routine you need to do??? Do i need vag-com or something like that? I need to replace mine and i appreciate any help. Thanks for your time to answer!
Thanks for the video my man!! Keep posting repair videos for Audi's!!!
Thank you. Great Video
Can you help providing part # for 2015 audi s4 dsg with dynamic
Thanls for the video it is great help. I am going to install a new electric rack as mine is faulty. Wanted to check if i'll have to do paramiterization thru SWM aswell or only basic settings. I can do basic settings thru ross tech but for software or paramiterization will i have to take it to dealer?
can you replace the seal in the steering rack?
Is it possible to fix an electronic steering rack for audi a4?
Great video. Thanks
Edge, after watching this video I am going to help a friend out with a dealership diagnosis bad rack. Is the 2013 and 2015 A4 rack the same and any idea where I can find a used rack?
What’s wrong with the rack?
Any ideas on how to do it on an audi s7
i wonder if My 2013 A4 has the same steering rack, I have the 6 speed manual trans?
Yes it does
electronic steering is the sensors right ? Because my car does not have sensors for rack , also did you have to drain any hydraulic steering fluid ?
Electronic steering means there is no hydraulic fluid, only electric motor
Am i the only person that noticed the Huge crack in the aluminum subframe?!
what about that big crack on the subframe the rack mounts to? Didn't change out the subframe?
We did this years ago... don’t really remember. It may of been that we just did it to record the video... as you see the car was after an accident....
Hi.i have a problem.i have an audi a4 2013.water went into my steering rack and now it doesnt work.is it posibble to replace the inside it or i must teplace the hole rack.and how does it cost a used one?please give me wide infırmation.thank you.please i will wait your answer
+Anar Qasımov the internals are not sold separately, i you want i have a bad rack with good computer, but most likely it will not work due to allot of other electronics inside the rack. used rack is 500-800 .
good luck
Awesome video!
İ found one.it was new.but outside was kracked while carring.i put the inside part of it inside mine.but it dosnt work again.what can u adwise me.please.its hard to find used one in my country
+Anar Qasımov did you reset the end stops?
check codes...
Is an ODB reader/scanner required to perform this job? My car has the "Steering defective - Do not drive" message. The dealer said the rack was defective. I've ordered a used rack and want to attempt replacing it myself. Should the Steering defective message go away after relearning the steering messages or will a ODB/Vagcom tool be required to clear that?
Well you will need the scanner to clear the errors in all modules, the new rack if not defective should not have “defective rack codes in it” :)
@@EDGEMOTORS Thank you! Great video btw!
Nice video, but please include the link to the items you use in your videos, PLEASE.
When you got this car was there an error code saying steering defective do not drive and there was no steering?
When we got the car, it was crashed and steering rack was broken
Hi my 2012 Audi A6 2.0 has been showing steering defective. The steering wheel is very hard to move on slow speeds. What can it be? I bought it like this. I’ve been reading and I’ve been getting either replace the whole rack or others have said to get it software updated at Audi. What is the solution? Please help me
Either, or... I won’t be able to tell without looking at the car.
Are u located in California?
New york
how will you know if it goes bad
Thanks for the effort in making video, but I can help but mention that the way it’s performed is unprofessional for these cars. Using power tools for tightening those subframe brace bolts is a baaad mistake, especially those front triple squares which go into aluminum. There’s no even appearance of a torque wrench and specs for any bolts. Needless to say that those are stretch bolts and need to be replaced every time you take subframe brace off. Pushing the bolts through the rack to put it into place is a bad idea too as you damade the threads and scratch off zink layer making them rust later and being a torture for the future mecharnic to take out. You’ve got the job done but rather poorly. I leave it here for the other people to be aware that this is not the way to do it right and may lead to potential damage.
And btw you cannot turn steering shaft since it’s locked by the lock on the column, so there’s no need to worry about the angle sensor’s ribbon cable.
Good Videos !
Hi Bro... Please I need your help,yesterday I drive my car through water and now I am getting noise from the steering wheel when I am turning right and left ... they told me that I need to change the power steering box !, could you assist me please.
What do you want me to assist you with?
Hey Edge for the relearn procedure that you did in this Audi. Does it apply it for all Audi's and other European makes and model or just this one?
BIG Z it only applies to some vw and audi with electronic steering racks.
@@EDGEMOTORS Hey please help I have a 2014 s4 with dynamic rack can you help me find the part number for it ?? And after installing it do I have to code it??
My car is the same. Why did you replace? Was the steering stiff? Dealer told me my rack was bad. I’m putting in a replacement like you did. Was your problem fixed after you did this? Did you need a recoding? Just curious what I should expect. Would my red steering wheel light go off or need dealer assistance? Thanks
The problem with this one was that the car was crashed and the rack got damaged.
You will need to do basic setting and the end stop relearn.
Mine was crashed too. I’m just curious if the replacesment will fix my issue of no steering at all.
Was your steering fixed right after installation? Or did you need dealer help?
You did a nice job showing this. Good work.
The steering won’t be stiff anymore.
Did you have to do this? Was it stiff at the start of the video? I’m just hoping a used one will solve my no steering issue. It’s my last problem.
Brian Wollner yep. Got in a little accident passenger front. Electric steering was out and steering indicator light came on. Ran codes at the dealership it pointed to rack and pinion assembly. Replaced it at my local German shop with a used one I found on eBay. Steering is no longer stiff. If anything a bit looser. But now the car is giving me all type of codes (which is why I ended up here). Codes I got after replacement was ESC/TPMS and headlight angling malfunction. I think something was done wrong during the rack replacement when putting the new one back on and positioning the steering wheel straight. Already did an alignment and that didn’t fix the issue. My steering is off center STILL.
Great video! Is this the same for a 2014 a4 b8?
Yes it is
Is this likely to be the same for a mk1 2008 A5 Quattro?
That one should be hydraulic...
hey boss, i replaced my rack and despite the steering wheel being straight the rack itself was not as it was used. anyway i can find out when the rack is straight using vagcom remove the steering wheel and than go back and straighten the steering wheel and than reconnect the shaft? at the moment i am unable to find a way to check dead center for the rack.
Ok.thanks a lot.im very thankfull to you.but it sold out.i couldnt but it(((
Hey man I have the same car as you and my car has a code come up that says steering defective do not drive car and my car does not start, the starter just clicks. I hooked up vag com and got a couple codes one was a no communication with the steering control module and the other was no communication with the steering angle sensor. Do you think that that means my steering rack is bad?
Your car should start regardless of steering being good or bad. So starting problem is something separate, figure that out first...
May be your battery is low? It would start to disable modules in the car if not enough power... that’s where the no communication codes could come from
Battery is not low because I tried jump starting it and nothing happened
Found my issue it was the sensor on the battery that goes bad after an accident. Car wasn't in an accident but that sensor failed for some reason
hey what sensor was it? and after u changed it did the defective steering message go away?
recently had my audi a3 rack changed but since new rack the steering seems heavy and the steering does not self centre. its way more heavy than before and if i fully lock steering the steering will just keep going that way. does it need calibrating do you think? any ideas would be great
Gooner Junglist
If its electronic it needs vag-com to calibrate it yes.
Any idea of new steering rack price for 2012 Audi a6
3.0 tfsi ?
+alhayem2009 8500 DHS new.
+Elie Alhayek Original one??
yes sure.
+Elie Alhayek Where did you find it?
+alhayem2009 alnabouda
the agent my friend.
how much a dealer should charge to replace it with OEM parts?
Probably 2500-3000$
@@EDGEMOTORS whoa mine quoted me 9000 :(
Did you replace the subframe. Huge crack in drivers side that’s the protection for rack n pinion
Makes no sense. Very dangerous. If you replace it then why not explain damage and reason
Please i have one last question.may car is 2.0tfsi.i have found o steering rack.but it is on the 3.0tdi engine car.is there any difference between this racks?please i want to know before to buy.pleae give me just an answer.i need help
+Anar Qasımov im not 100% positive most likely the same... but check the part number...
Отлично)
Hy guys am looking for assistance in diagnos my Audi B8 steering rack da light in da panel is red nd I tried almost 4 steering rack bt it's not changing pls help
b8 has a hydraulic power steering, the steering rack does not have a computer in it....
what year is it?
2012 model nd it's a electric steering rack like da one on this video
So it’s a 2012.5 b8.5 ?
What codes is it throwing?
It shows a red steering so nw I really don't know what to do
Scan the computer and see what error codes the steering assist is throwing
any one knows the part number of 2013 S4 B8.5 rack? electric with dynamic steering
There is several numbers
can you give me any kind of numbers, the electric steering stopped working because i drove over a puddle of water, now i cant find a used part anywhere and the brand new one cost 2k+
Send me your vin I’ll let you know
EDGEMOTORS ok sorry for the late respond Bratan, I’ll send it now
EDGEMOTORS waukgafl3da069533
Are you in a different shop ?
V10PDTDI same shop... getting old, need som tlc...................... but no time.
EDGEMOTORS or maybe a bigger and better shop... no space for tools anymore.
Do u do an alignment afterwards?
Yes you have to do wheel alignment after most of suspension work
Please just answer my last question?please.i need
Here because I went through water and the rack on my C7 A6 died. Audi couldn't "find" water damage so my insurance wouldn't cover.
You did use the same subframe and it’s a huge crack. Explain why you used the broken subframe on the reinstall
Doing the same had undercarriage and same side cracked. Replacing it. That is not o e m. Safe. Why not tell your client and make home replace used part 200
Computer diagnostic says the sensors inside the rack doesnt work.and the brain of it.we are not so lucky, because we doesnt have such good masters as u
+Anar Qasımov see like i told you, there are allot of other electronic parts in there.... so could of gotten damaged.
but you have to make sure you relearn it. allot of times it would say that some sensor is bad just because is is not calibrated properly.... so try to calibrate it several times and see what happens.
The masters try to calibrate but they cant do because the sensors.is it posibble to repair sensors and brain?