I Created a MONSTER - Rlaarlo Omni-Terminator 100% Upgraded

Поделиться
HTML-код
  • Опубликовано: 24 дек 2024

Комментарии • 388

  • @seanchristman9548
    @seanchristman9548 6 месяцев назад +23

    Happy Fathers Day!

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад +7

      Thanks dude! You too if applicable!!

    • @explorster
      @explorster 6 месяцев назад

      Thanks, you too.

  • @jeremycravens6973
    @jeremycravens6973 6 месяцев назад +6

    You might be the only good thing coming out of Louisville! Your channel has been a steady growth. You were meant to do this ! Thanks, and the truck is a beast!

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад +1

      There’s some good burger joints too! 😂
      Thanks so much bro man!! 😊🤜💥🤛

    • @dreadheadgunnroyaleliteken9583
      @dreadheadgunnroyaleliteken9583 3 месяца назад

      @@DerbyCityRCI just got my first one what’s a beast motor for more speed

    • @dreadheadgunnroyaleliteken9583
      @dreadheadgunnroyaleliteken9583 3 месяца назад

      I live in Louisville also 😅

    • @DerbyCityRC
      @DerbyCityRC  3 месяца назад +1

      @dreadheadgunnroyaleliteken9583 this here: amzn.to/4g2gCCF
      It’s close to the same size of what I used but it has a physically larger esc with 85amps instead of 60 amps.

    • @DerbyCityRC
      @DerbyCityRC  3 месяца назад

      @@dreadheadgunnroyaleliteken9583 😂✌️😉

  • @RichardSteffan-dk2vj
    @RichardSteffan-dk2vj 6 месяцев назад +1

    Sweet build. I've got a 11.4v 4200mah 120c lipo that fits perfectly in place without relocating the esc. Not sure if it was available at the time when this video was made.

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад

      Thanks! I’m not sure either but longer run times get me in trouble 😂😂
      Poor esc was already hitting temp cutoff.
      This set of batteries is only $28 compared to the $68 I think it was for the Zeees if that’s what you’re talking about. That’s a good option I’ll have to share too. Thanks!

  • @ferdinandmaier1070
    @ferdinandmaier1070 7 дней назад

    Which steering has more play? The plastic or the aluminium one? Respectively where comes the play from you mentioned at 15:27?

  • @insanebmxthomas
    @insanebmxthomas 6 месяцев назад +1

    As an Omni owner, thank you for doing this, awesome video (even though i'm older, i really enjoy your editing style) and i couldn't be more excited to see those S2 driveline parts holding up well! I guess i'm ordering both a Kagama and some Rlaarlo parts this week lmao! Man... life is good sometimes.

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад +2

      You’re welcome man! And I appreciate the note on liking the editing! I get a few complaints on it being annoying but most people seem to like it and ya can’t please them all unfortunately. Keep in mind they’re have been complaints on the s2 parts still, just reduce that driveline angle maybe and it should help. Life is awesome for sure! (Oh and if you use my link when you order your parts, that helps us out!) thanks man!!

  • @RCRoads
    @RCRoads 6 месяцев назад +1

    Nice one. You totally rebuilt the truck. Excellent job keeping the rebuild quick and exciting. You actually showed everything quite well and just keep it moving along. I can tell you put tons of work into making this video. Great driving as well.

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад +2

      Thanks! Yes that was my goal (and usually is), to show enough so it can not only help people do the same stuff, but also to keep it exciting and give as much info as I can. This was a rather involved video 😆
      Thanks so much!!

  • @joeytravis1953
    @joeytravis1953 6 месяцев назад

    How do get the front end to stop nose diving when jumping it jumps funny I have the aluminum green version I tried ramping it but it always nose dives almost instantly and lands badly

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад

      Ya I think I mentioned that in my review video or the comparison video against the hbx 2997a. I didn’t notice it doing that with these upgrades so it could be a small amount of drag brake in the esc. You can counteract it by blipping the trigger in mid air. Just learning to time that throttle blip. All cars feel different.

  • @porscheguy19
    @porscheguy19 6 месяцев назад

    I had thought that Rlaarlo had nailed the motor from stock. Any upgrade there would just make the truck unmanageable. They did such a good job right out of the box... That's what's amazing.

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад +3

      They did do a good job! But I do think the motor was slightly underpowered. Maybe not in the carbon version, but this one definitely needed more. My motor took it over the top for sure though.

  • @joeytravis1953
    @joeytravis1953 2 месяца назад

    What is the biggest castle motor and esc that will fit in the green version without modifications

  • @joeytravis1953
    @joeytravis1953 4 месяца назад

    Where can I get a bearing kit for the green version omni terminator

  • @hinnmanfamily
    @hinnmanfamily Месяц назад

    Does the carbon fiber version cone with the upgraded outdrives?

    • @DerbyCityRC
      @DerbyCityRC  Месяц назад +1

      It does not, those are upgrades sold separately. However it seems they have made improvements to the stock outdrives since this video was made.

  • @gabea2159
    @gabea2159 23 дня назад

    What would be the best way to remove the stock pinion mines partially stripped using the stock allen key and heating the screw with a small torch. What should i do?

    • @DerbyCityRC
      @DerbyCityRC  23 дня назад

      I had to drill mine out on the XTS Rally car. I think I used a cobalt steel 1/8” drill bit and had to drill through the screw all the way down to the surface of the motor shaft and then use a pinion gear puller. It was an adventure. You could definitely try to hammer a torx bit into the hex hole and use that along with some heat. Use some blue loctite when you reassemble. They shouldn’t be using red there but they have been.

    • @gabea2159
      @gabea2159 23 дня назад

      @DerbyCityRC ill do my best 🤣 I'm a new omni owner and I've only seen the horror of the 1.5 screws

    • @DerbyCityRC
      @DerbyCityRC  23 дня назад

      @gabea2159 ya…man I hope they fix the garbage screws soon. If you’re super super careful it usually won’t happen atleast the first time. But even with that, it did happen on my Rally. They need to use 2mm or bigger drivers.

  • @Hungrybird474
    @Hungrybird474 6 месяцев назад

    I hear ya about the 1.5mm screws are no bueno to the max . Never again a truck with 1.5mm screws for me . I tried some 4.3” tall tires and they were awesome , gdool on Amazon . Yeah man , waiting on some outdrives . I’ve jumped this truck probably more than most , continually in a dbl sided . She does fly nice imo . I noticed it lost its soft landing and saw I had bent an arm pin . No problemo . Just need to replace the outdrives and check the the middle parts pieces . It’s a good truck for sure . I jumped the heck out of it . Pinions will go too . I like the 4.3” tires with the 27t pinion and turned it down to 75% because full throttle sounds damaging , even with the stock tires . Cool cod . Thanks for sharing .

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад +1

      Glad you like it! The worst screws of them all were on the upgraded center diff. They’re even smaller. My 1.27mm driver was even too big. The stock center diff was 1.5. Makes no sense lol I think I forgot to mention that. But ya I’m gonna replace those screws as I service this some more. It’s definitely a well planned at built RC!

    • @Hungrybird474
      @Hungrybird474 6 месяцев назад

      lol same here . I thought the comment got deleted . Have a great day .

  • @MrFilthyyyy
    @MrFilthyyyy 6 месяцев назад +3

    Starting a Sunday with a fresh Derby City RC video.... Life is good.

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад +1

      Heck ya man!! 😃🔥

  • @Danielxperez14
    @Danielxperez14 6 месяцев назад

    Do you have the link for the exact combo or esc atleast that you used? Thanks

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад +1

      Unfortunately it’s obsolete now. Even on the Hobbywing website the exact kit is not listed. The esc looks physically bigger on the newer version. It’s the Max10 EZRun system.

    • @Danielxperez14
      @Danielxperez14 6 месяцев назад

      @@DerbyCityRC oh okay, I’m new to the electronic stuff but is 120 amps enough for 4s? I seen some guy only change the esc to run 4s and he went 58 mph

  • @CK4RC
    @CK4RC 6 месяцев назад +11

    “Epic-icity!” 😂😂 I love high quality made up words that just work. My son loved the high five with the goblin. Hilarious video, and super cool build!

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад +4

      Haha! Another one of my awesome common commenters used that word and told me to use it 😆! It’s definitely a perfect word that should instantly be added to the Webster!

  • @stefan-norge
    @stefan-norge 6 месяцев назад +1

    What a great vid. So much information packed and so fun to watch. Could not be better! Amazing work 🎉

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад

      Thanks a ton bro!! 🤜💥🤛

  • @EMOrtiz17
    @EMOrtiz17 6 месяцев назад

    I currently have to replace the center differential due to a rock destroying the housing and diff fluid leaking out. I currently ordered the upgraded one like you installed and wanted to know if it’s recommended to add the thicker diff oil or will the one it comes with will suffice for normal runs and bashing ?

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад +1

      To me it’s recommended but it should operate very similarly to the old one if you don’t do any fluid service. The 500k gives it better handling in my opinion and helps keep the front tires from ballooning like crazy when wheely-ing and hard acceleration.

    • @EMOrtiz17
      @EMOrtiz17 6 месяцев назад

      @@DerbyCityRC Thanks for the reply! Would also recommend changing out the oil to the front and rear def as well? Also It’s definitely appreciated the work you’ve been putting into this RC that not too many people are covering. Definitely gained a subscriber!

  • @gabea2159
    @gabea2159 16 дней назад

    Is the any good 3rd part pinion gear? And should I go higher then the upgraded pinion that comes with the Cf or can I go to the 30s?

    • @DerbyCityRC
      @DerbyCityRC  15 дней назад

      The upgraded pinion it comes with should easily get you in the high 30s or faster with the carbon version. I for 37 with the metal version before I did this upgrade.

  • @jekae61
    @jekae61 5 месяцев назад

    Great video as always.
    So you feel like all the upgrades are good? Do you need them all?

    • @DerbyCityRC
      @DerbyCityRC  5 месяцев назад +1

      Thanks! Yes they do seem good so far. I’ve definitely still heard complaints of the new s2 cups wearing also though, just takes longer I guess. I wouldn’t buy them all at the same time except maybe all the drivetrain parts. Then you don’t mix hardnesses and cause wearing on other components. Plus you will have the originals as spares. The other parts I would probably only replace as needed.

  • @michaeldorich4485
    @michaeldorich4485 6 месяцев назад

    The Globinator performed extremely well. I was surprised the body held up so well. The truck had a lot of very hard landings. Happy Fathers Day.

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад

      I agree. Wasn’t too bad for those horrible crashes. Thanks!! 😃😊

  • @BangForYourBuckRc
    @BangForYourBuckRc 6 месяцев назад

    I love it! “Goblinator”, customization at its finest! Love those steer /paddle tires. Very Noyce! Have a great-abulous fathers Day Evan!

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад +1

      Thanks Robby!! Happy Father’s Day to you!!!

  • @djmandrick
    @djmandrick 6 месяцев назад +1

    Great way to start a Saturday afternoon. Lets go!

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад

      🔥🔥🤜💥🤛😃

  • @chrisperrywv
    @chrisperrywv 6 месяцев назад

    Any recommendation on a shorty pack that fits in the stock spot? I NEED another battery. Me and my son crush the one pack too quick.

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад +1

      What about the ones I showed in this video? They worked perfectly. I have the direct Amazon link in the description

    • @chrisperrywv
      @chrisperrywv 6 месяцев назад

      @@DerbyCityRCoh my gosh 🤦🏼‍♂️ I guess I didn’t pay attention. Haha.

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад +1

      @chrisperrywv 😂😂 Saul Goodman!

  • @aknmtbr
    @aknmtbr 6 месяцев назад

    What drill is that?

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад

      I have this kit. This is the brushless one, I don’t think mine is brushless but it’s on sale for less than the brushed! amzn.to/3Vr0UHy

  • @Danielxperez14
    @Danielxperez14 6 месяцев назад

    do you reccomend this as a good first 1/10 scale basher? i have a smaller wltoys and want a bigger basher, would you recommend this over something like a rival mt10 or arrma granite?

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад +1

      It’s a good choice, but it’s not truly a 1/10 scale. It’s excellent quality in my opinion but with a few wear points like I mentioned in this video. The granite is the fastest of those options, and the Omni is the slowest but also has alot of upgrade potential. For size and speed, the granite. For size and handling, rival. For smoothest driving and the most adjustability and less cost, the Omni. That’s one way to try to describe it. They’re all quite different and it’s hard to say which is better. Also the bigger two will have better parts availability for now.

    • @Danielxperez14
      @Danielxperez14 6 месяцев назад

      @@DerbyCityRC yea honestly I don’t care too much about it being smaller, I honestly think it looks cooler than the granite and mt10 but only thing I’m worried about is spare parts shipping time, I’ll probably go with the mt10 first then get this after, I do like how you can buy so many upgrades for it

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад +1

      Yup! Some of the parts for the terminator are showing up on Amazon so might be better availability real soon. Mt10 and Omni are awesome cars to get so I like your thinking!

    • @Danielxperez14
      @Danielxperez14 6 месяцев назад

      @@DerbyCityRC yea I seen that, I’ll keep my eye on it, thanks again man I subbed

  • @alantaylor353
    @alantaylor353 6 месяцев назад

    If you're using Loctite or any other thread lock remember to ALWAYS use heat on the screw before attempting to remove it again.!
    I stripped so many screw heads when I first started out with RCs, especially 1.5 & 2mm ones... I always use heat now... I don't even attemp to unscrew it before I've heated it.!
    You'll often strip the screw to discover you need heat, by which point it's too late.!
    It saves so many headaches.
    I just use a disposable cigarette lighter for about 20 to 30 seconds, but you can better control where you put the heat with a mini blowtorch.!
    Obviously be careful around plastic parts, do it gradually.
    For ultimate precision you can use a soldering iron directly onto the screw head.!
    If you can't get to the screw head you can heat the metal the screw threads into.
    Also, a good set of hex or Allen bits/drivers/wrenches is a must.!
    The cheap ones that come with your RC are usually junk.
    I use a Bondhus "Gorilla Grip" fold up hex tool to loosen my screws before using my electric screwdriver.
    I've tried so many over the years & these are up there with the best, if you want better you need to be prepared to pay.!!
    (price & fancy coatings doesn't always guarantee quality.. Be warned)
    They're made from high quality hardened steel, last ages, are pretty cheap ($6 Amazon) & made in the USA.!! 👍 👍
    I've got like 7 or 8 of them.
    Never use your electric screwdriver to tighten or when you first break a screw loose, always do it by hand with your best tool & make sure the hex head is free from dirt in the head so your tool seats all the way in.!
    When your hex tool wears you can take a Dremel & cut the tip off, but do it SLOWLY, you don't want to get the tip too hot because you'll soften the steel & it'll round off immediately.!
    I have my Dremel tool on 3 or 4 & stop to dip the tip of the hex tool into cold water every 10 seconds or so.
    If the tip glows red you've buggered it up.! 😉 😉
    I hope this helps someone.!
    Please stay safe out there & the very best wishes from Scotland 🏴󠁧󠁢󠁳󠁣󠁴󠁿 🙏 ❤️ 📻 🕹️ 🔋 🚗 🚖 🚕 🚔 🚚 🚙 🚘 🚓 🚒 🚑 🚐 🚎 🚤 🚁 🛩️ 👍 👍 👍

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад +1

      These are all good tips! Especially the heat before removal. The good tools is another good tip. Buy once cry once or buy cheap buy twice cry twice.
      Thanks dude, always appreciate your comments!!

    • @alantaylor353
      @alantaylor353 6 месяцев назад

      @@DerbyCityRC Thanks mate..
      I always enjoy your EPIC content.!
      You're just getting epic-er & epic-er all the time.!
      This video was especially... Errr.. EPIC.!.. Yeah, EPIC.!! that's the word I'm looking for... IN ALL CAPS NO LESS.! 😉 😉 😂 😂
      SSOT&BWFS 🏴󠁧󠁢󠁳󠁣󠁴󠁿 🙏 ❤️

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад

      @alantaylor353 you’re welcome!! Super glad you like the continually climbing epicicity!! 😃😄😄😊

  • @davidkanoff110
    @davidkanoff110 6 месяцев назад

    Gotta find a way to fix the cvd cups from wearing out, ive almost completely ate through them and my kids are having the same issue with theirs,
    if only we could put the H14BM cvd's on the terminator,,,, they are too short, I've tried.

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад

      Does yours have the new S2 units installed or still stock?

    • @davidkanoff110
      @davidkanoff110 6 месяцев назад

      @@DerbyCityRC they are still stock.

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад

      @davidkanoff110 gotcha. When it’s time to replace, be sure to use the upgraded ones. Still reports of those wearing too but not as quickly. Hopefully they make more changes. It’s definitely the biggest complaint.

    • @davidkanoff110
      @davidkanoff110 6 месяцев назад

      @@DerbyCityRC what camera and GPS do you use for FPV on your rc cars? Been looking for something but the ones I've found just look to bulky. Thanks!

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад

      @davidkanoff110 this is what I use for the FPV. Just need a better way to mount it more securely. amzn.to/4baPTQk
      I don’t care much for that gps even though it’s done well with all the crashes it’s survived-ish, but I just for this one I’ll be testing in the next video or two. This one gets the most praise for accuracy: amzn.to/4ba4XxF

  • @scaleworksRC
    @scaleworksRC 6 месяцев назад +1

    He hit em' with the 'goblin style'
    😆🤣😂 Happy Father's Day and always looking forward to a fresh Derby City episode👍

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад +1

      Haha! 🤣 And all of a sudden all my neighbor’s houses have “For Sale” signs out front 😂😂. Thanks dude!! 😃

    • @scaleworksRC
      @scaleworksRC 6 месяцев назад

      @@DerbyCityRC 😁

  • @joeytravis1953
    @joeytravis1953 Месяц назад

    My metal version omni terminator it's making a funny fluttering noise the front tires don't turn when it's flipped over it's kind of jumpy and fluttery when accelerating any idea what could be wrong with it

    • @DerbyCityRC
      @DerbyCityRC  Месяц назад

      Can’t be certain but I paid for ground and check set screws ok the little drive cups where the center shaft goes onto the rear diff and front diff. Check for broken axles. Need to see what’s not spinning and where it stops spinning.sometimes hard to pinpoint.

    • @joeytravis1953
      @joeytravis1953 Месяц назад

      @DerbyCityRC it end up being the front diff and the spur they ate the teeth off of each other

    • @DerbyCityRC
      @DerbyCityRC  Месяц назад

      @joeytravis1953 ouch!! 🤕

  • @Slow_PEV
    @Slow_PEV Месяц назад

    Sick jumps and build bro! I busted a pull rod on mine but still. Very impressed how much these things can take a beating and even more so with the upgrades people choose.

  • @Multi-Skill-Bill
    @Multi-Skill-Bill 6 месяцев назад +1

    Great video!
    I have found out (when I wrecked mine) that tires over 4ish inch with the bigger pinion make this thing uncontrollable.
    Thats how I cartwheeled into a trailer hitch haha. Mine were 5 1/4 and 2 1/4 wide.
    I have some 4 1/2 x 2 1/2 wide roadies for it when the new hubs get here. Shipping time not too awesome yet.
    Hopefully then I can keep the front on the ground and hit full throttle. Oh yeah, 12mm extensions for that stance too LOL.

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад +1

      Thanks!! Haha ya bigger tires aren’t always better lol
      Yup they’re shipping not so fast. I know it’s one of the things they hope to improve. 😃

  • @jonathansullivan2048
    @jonathansullivan2048 6 месяцев назад

    Happy Father's Day to you! Love your videos. Bought my son his first RC truck. The legendary 310E it's definitely alot of fun.

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад

      Thanks and you too!!
      That’s awesome 😃

  • @RCREVEALED
    @RCREVEALED 6 месяцев назад

    Great video! That Goblinator is SICK!!!

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад +1

      Thanks! I think so too!! 😃

  • @wallacebates6454
    @wallacebates6454 6 месяцев назад +1

    Looks great Happy father’s day. Bro. Enjoy the day

  • @neverender158
    @neverender158 6 месяцев назад

    What a great way to spend Father's Day. Another great video from you.

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад +1

      Happy Father’s Day man! Glad I could help make it a good one! 😊

  • @mikev221
    @mikev221 6 месяцев назад

    Awesome video and build! The goblinator is a sick rc 😝. Thats a true extended review, lots of useful info for modders and everyone else I really like that. You're the best at finding weak points and not relying on or advertising super expansive parts . Good job as always!👍

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад +1

      Thanks!! Ya I wanted this video to be the whole thing. Install, test, and repair! Thanks for the awesome comment!! 🤜💥🤛

  • @hinnmanfamily
    @hinnmanfamily Месяц назад

    The only reason for a bend is clearance, so if something was making contact limiting your steering without it, put the bend wherever alleviates that (you'll note that if you use the original links and bent links as compasses, as long as the distance between the centers of the holes of the rod ends is the same, they draw the same circle, meaning the bend doesn't actuality change the steering geomtery any).

  • @mary0224
    @mary0224 6 месяцев назад

    I have something to ask what tire glue do you use and where can I get it ?

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад

      I use this stuff. Hasn’t failed me yet! amzn.to/4c6xkyh

  • @MagnifiedGiant
    @MagnifiedGiant 6 месяцев назад

    Not very often a body shell makes it without getting broken and damaged from your testing. Looks very durable. Nice work on this video!

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад +1

      Yup I agree! The original body on mine broke on the very first crash on concrete lol this is the body that comes with the “higher end” Carbon fiber version. Different material. Thanks!!

    • @MagnifiedGiant
      @MagnifiedGiant 6 месяцев назад

      @@DerbyCityRC I have one. Thanks to your earlier video! I don't beat on it quite as hard as you do so it is good to know it will take whatever I throw at it.

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад

      Sweet! Exactly why I do what I do.
      Thanks again!! 😃

    • @stefanosk80
      @stefanosk80 6 месяцев назад

      @@DerbyCityRC Yeah, the polycarbonate body of the CF edition is extremely durable!

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад

      @user-yl6bh1xi8l I love it!!

  • @mattster197
    @mattster197 4 месяца назад +1

    I like the mod to the wheelie bar. I am going to change the wheels to rubber plane landing gear tires.

  • @gillian9178
    @gillian9178 6 месяцев назад +1

    Im luving running the Terminator carbon rtr, such a great performing truck. Also looking forward to getting the new MJX 1/10 monster truck when there released, I dare say you will be thrashing one of those as well soon.

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад

      Me too it’s so good! Yes I should have two 1/10 MJXs on the way. No indication they’ve shipped yet!

  • @OB_RC
    @OB_RC 6 месяцев назад

    Awesome build! Happy Father's Day

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад

      Thanks and you too!!

    • @OB_RC
      @OB_RC 6 месяцев назад

      @@DerbyCityRC how do you feel about the legendary thunder 1/10 scale as far as a budget rig? I've heard it's pretty good for the price range but Amazon said it's had lots of return issues. Any thoughts? I'm trying to pull the trigger on either this or the 2997a. I'm sure the 2997 has got to be better quality the price for the thunder is $109 for 1/10. Your thoughts and opinion are valued.

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад +1

      @Brad-bb2io i get so many requests for that one, it’s unbelievable. I mean like three comments about it just from this video alone lol. I’m going to reach out to Laegendary soon and see if I can try one for them, but I have a feeling like the 2997a more. I don’t believe the Thunder has a center differential. Would still be a fun one to test though!

  • @roadstar499
    @roadstar499 6 месяцев назад

    Nice upgrade demo video!

  • @kevincain6843
    @kevincain6843 6 месяцев назад

    Thanks and Happy Fathers day! I love my carbon Terminator. Got all the upgrades when I ordered it. Still need to install.😂 Evan ,thank you for all the work you do. Great Vid!

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад +1

      Thanks man!! I’d say keep the upgrades for if things break! Besides performance upgrades might as well wait or do it whenever you’re bored lol 😆 thanks and you’re welcome!!

  • @Hungrybird474
    @Hungrybird474 6 месяцев назад

    Thanks!

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад +1

      Super awesome thanks for your super thanks man!! 😊

    • @Hungrybird474
      @Hungrybird474 6 месяцев назад

      @@DerbyCityRCyou are more than welcome brother . Stay cool today . Love the channel and what you’re doing . It’s not as heck up here today in eastern Ohio . Stay cool . The sun got me last week. I had a cooling rag around my neck too but was transplanting 10ft emerald green arbavitas with zero shade . I knew to stop when my head started to pound but it was too late . Straight to the hose , water over head 😂. Had chills for 3 days afterwards . It’s no joke .

    • @Hungrybird474
      @Hungrybird474 6 месяцев назад +1

      I mean , yes it’s a joke but the sun can wreck a person not paying attention .

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад +1

      @Hungrybird474 ya I get it. Luckily I’ve never had heat stroke and I’ve heard it’s easier to get once you get it once? You’re exactly right the extreme heat is no joke, so be careful out there yourself as well!
      Thanks again!!

  • @bullhead360
    @bullhead360 4 месяца назад

    My remote is locked and it’s not taking any input adjustments. Does anyone know the fix for this?

    • @DerbyCityRC
      @DerbyCityRC  4 месяца назад +1

      Is it the carbon fiber remote? If believe there is a fix but I don’t know it. Check the Facebook groups as other people have reported a similar issue.

    • @bullhead360
      @bullhead360 4 месяца назад

      @@DerbyCityRC i got it fixed brother! Thanks anyways and thanks for responding!!

    • @bullhead360
      @bullhead360 4 месяца назад

      @@DerbyCityRC I found the solution in the comments of another video: “With the controller off, turn it on by holding the power button and the bottom right button at the same time.” Hope this helps somebody🤘🏼

    • @DerbyCityRC
      @DerbyCityRC  4 месяца назад

      @bullhead360 you’re welcome!! 😊

  • @L2theWcarscoffeelife
    @L2theWcarscoffeelife 6 месяцев назад

    They are damn tough but not fun to work on lol Try the zeee premium 4200mah 120c its shorter so it fits in but its a hair wider I took that side skirt off easily trimmed the plastic and put some foam mat in there wow what a difference the battery makes.

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад +1

      I probably will grab those batteries. A lot of people suggested them. Ya know I was worried but I actually enjoyed working on this. I have a mechanical background but it was pretty straightforward except for the poopy 1.5mm screws 😂

  • @FilthUD
    @FilthUD 6 месяцев назад

    Pretty solid goblin moves!

  • @SlaveOfSouls
    @SlaveOfSouls 6 месяцев назад

    Guys , does anybody knows whats the lowest teeth pinion which can fit to carbon edition motor mount ? The stock is 24T will 19T fit ?

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад +1

      When I did this, I remember noticing how close the motor shaft was able to get to the spur gear without a pinion gear installed. I think a 19 will work.

  • @FarmerFpv
    @FarmerFpv 6 месяцев назад

    Happy Father's Day! You should try stiffer springs and thicker shock oil for jumping ramps. It is chassis slapping really hard which is why it bounces a lot. It's too plush out of the box. Never could get why they set them up with plush suspension when it is a basher and not a racer. I prefer to use progressive springs. They are plush up top and get stiffer at the bottom. You could also try some chassis bunions.

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад

      That would help, I don’t always jump it crazy like this. Was really for testing purposes. The progressive springs would be awesome, I haven’t tried them yet on anything. The chassis bunions may do the trick!!

  • @RedRoxRc
    @RedRoxRc 6 месяцев назад

    That thing is bananas. Totally awesome
    Video!! Anyone interested in this truck definitely should watch this video! 👊

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад

      I agree, thanks!! 😃

  • @JohnDoeTheTroll
    @JohnDoeTheTroll 6 месяцев назад

    Happy Dad's Day, Evan!!! Thanks for keeping us entertained!!

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад +2

      Thanks dude and you’re welcome!!

  • @DedicationRC
    @DedicationRC 6 месяцев назад

    Happy Father's Day. thanks for the video!

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад

      Thanks and you’re welcome! Thanks for watching!

  • @Richard-nv4sn
    @Richard-nv4sn 6 месяцев назад

    wasn't trying to be negative really like your work keep it up 😊

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад

      No you’re good!! Glad you liked the project, man!!

  • @digeolrc8586
    @digeolrc8586 Месяц назад

    What scale is it?

    • @DerbyCityRC
      @DerbyCityRC  Месяц назад

      This would be a 1/12 scale. Maybe slightly oversized 1/12. Rlaarlo markets it as a mini 1/10.

  • @Nerm78
    @Nerm78 6 месяцев назад

    Happy father's day! This is the video I have been waiting on! Awesome build and bash. I have most of those upgrades on my cf terminator other than the servo and electronics and I don't plan on beating on it as bad as you. I think it's going to take my grass and dirt bashing just fine! I may have to steal the goblinator theme though!

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад +1

      Thanks and you too!
      Yup things will always happen but should take a standard bash easily! I thought about putting in there that I’ll mail out 2 stickers for $3 domestically and $4 internationally lol gonna have some higher quality ones made for that.

    • @Nerm78
      @Nerm78 6 месяцев назад

      @DerbyCityRC hell yeah! I need goblinatator stickers for mine!

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад

      @Nerm78 sweet! Send me an email! derbycityrc@yahoo.com

    • @Nerm78
      @Nerm78 Месяц назад

      I just now thought...I believe you are the only one I have seen that managed to bend that chassis. Woot!

    • @DerbyCityRC
      @DerbyCityRC  Месяц назад

      @Nerm78 haha! 🤣

  • @10thscaleperformance
    @10thscaleperformance 6 месяцев назад

    Nice! I've done the same thing with the LAEGENDARY Thunder & starting to get there with the 2997A!
    Great build & video 👍

  • @creepingtod
    @creepingtod 2 месяца назад

    OMG EVAN! Jesus christmas.. I have my buddies .... he tore up the differential and I have been tasked to take it apart.. I've gotten the front half way off and there's a stripped Alan screw... how do you get them out??? And glad I've been watching you all morning while I clean on my day off.. thanks man!

    • @DerbyCityRC
      @DerbyCityRC  2 месяца назад +1

      Hey Tod! Ya that’s always fun! So the best way (depending on the situation) is to jam a torx/star bit into it by hammer force and is that. I have a brief demo of doing that I believe in the video where I built my own version of the mjx 10208 when trying to tune the center diff. It needs to be something you can hammer on without breaking stuff. Hope that helps!!??

    • @creepingtod
      @creepingtod 2 месяца назад

      @DerbyCityRC yes that was my thought too.. but just thought I'd ask you., right now this very moment I have the 14303 Citroën turn down because I snapped the back lower arm AND the shock tower, but the screw doesn't want to come out of the center brace tube bar... mf. Using two pairs of wrenches as we speak upgrading to metal parts and watching Evan...lol

  • @ikeeiie78
    @ikeeiie78 4 месяца назад

    I see you got the roof breaks too 😂 great little truck good video

    • @DerbyCityRC
      @DerbyCityRC  4 месяца назад

      Haha! Good way to slow it down for sure 😅

  • @justincremer4638
    @justincremer4638 6 месяцев назад

    Hell yea! Happy Father's Day!!

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад

      🤜💥🤛 Thanks!! 😃

  • @ArnoldKrT
    @ArnoldKrT 6 месяцев назад

    Great ideea with that Hyper Go wheelie in middle , i will do that also , Love you man❤

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад

      Glad I can help! 😊🤜💥🤛😃❤️

  • @Rlaarlo
    @Rlaarlo 6 месяцев назад +1

    As always, I love your content-it's clear you put a lot of effort into making your videos. 😍❤

  • @benlandrum75
    @benlandrum75 6 месяцев назад

    Great video as always Evan! 🤘🤘 Lots of good info and entertainment. Happy Father's Day!

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад

      Thanks Ben! You too man!

  • @Mike_A08
    @Mike_A08 6 месяцев назад

    Excellent upgrades

  • @jaymyers9899
    @jaymyers9899 6 месяцев назад

    Nice job ! That thing is a goblin monster, you nailed it again , thanks for the great entertainment !

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад +1

      Thanks! Yes it is and you’re so welcome! Thanks for being here!!

  • @PaggiPlumbing
    @PaggiPlumbing Месяц назад

    I really like your videos on how to repair the less popular brands as theirs really not much out there also the goblin dancing made me really appreciate the work that went into this video 😂😂😂😂

    • @DerbyCityRC
      @DerbyCityRC  Месяц назад

      Thanks! Glad you found this helpful! My neighbors slowly inch their way back inside when I come out ever since they saw the goblin come around 🤣🤣

  • @BriansRCStuff
    @BriansRCStuff 4 месяца назад

    Outstanding video as usual! You are a savage. That thing took one hell of a beating!

    • @DerbyCityRC
      @DerbyCityRC  4 месяца назад +1

      Thanks Brian!! It did! This has me thoroughly impressed even though I know the car still has some weak points!

  • @ronswitzer6057
    @ronswitzer6057 6 месяцев назад

    Awesome video!! Have the carbon edition on the way, I have two sets of those bigger tires I also love them! I use them on my granite and they are so much fun!! Keep up the good work man!!! 🤘🏻

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад

      Awesome, yes these are good tires! Thanks!! 😊

  • @Hungrybird474
    @Hungrybird474 6 месяцев назад

    Srry about all the comments . I wanted to add that on my example the wires coming out of the receiver box were on the motor . Zipped to the cf chassis brace. Overall this truck has been a lot of fun for me to learn jumping . Nothjng ever failed in all my comments here , yet. When the wheels were wobbly is when I noticed the outdrive damage . Seems like one of the dogbone pins in the front went flat sided and shows zero wear on the cup so far compared to the other side . I may file a small flat sop on the next set of stocks until the s2 upgrades arrive . I ll report back in awhile

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад +1

      I don’t mind the comments!
      Ya keep me posted how it goes!

    • @Hungrybird474
      @Hungrybird474 6 месяцев назад

      For sure 👍.

  • @Boogie_the_cat
    @Boogie_the_cat 3 месяца назад +1

    Goblins are indeed green. There was even a famous green goblin who hated Man-Spiders.
    I think his name was OSHA Yellow Goblin, and he might have been in a movie called "Tropic Thunder"
    At least, that's how i remember it, I'm pretty 99% certain OSHA Yellow Goblin was a Rob Liefeld creation, and he had a massive gun and even bigger pecs, because, you know, Liefeld draws really "unique" proportions.
    Or maybe he was a Biker Mice from Mars villain. 😂😮🤔🤣
    Great video, i really enjoy the comedy you infuse into many of your videos.
    That's the kind of thing that will help your channel stand out from the rest.
    Nine thumbs up 👍🏽

    • @DerbyCityRC
      @DerbyCityRC  3 месяца назад +1

      I’ve heard mere rumors of red goblins out there lurking around. Thought I caught a glimpse of one in my peripherals once but when I turned my head it was gone.
      Surely I’ll run into one one day…
      Thanks bro!!!

  • @rasheemgreedyman8255
    @rasheemgreedyman8255 6 месяцев назад +2

    Happy Father's Day the bad Terminator RLAARLO.!!!💯💯😎😎💪🏿💪🏿🔥🔥🔥🔥🔥🔥🔥🔥

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад

      You too man, if applicable!
      Thanks!! 😊 🤜💥🤛

  • @chrisperrywv
    @chrisperrywv 6 месяцев назад

    That wheel taking flight 😂 yo- just ordered mine. Did you sort out that bolt that always bends on the shock tower?
    Also- video recommendation- you should consider grabbing an ND filter for your GoPro. I don’t have a modern GoPro but I feel like it would make the visuals a little less crunchy. I could totally be wrong. I always enjoy the content.

  • @101projects2
    @101projects2 6 месяцев назад +1

    I'm just laughing at the fact that at some point you walked into you garden put on a goblin mask and started dancing..while filming yourself 😅

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад

      🤣🤣 whaaaaaaaat? That’s a real goblin! They seem to be taking over!

    • @boduke9428
      @boduke9428 6 месяцев назад +1

      Just imagine his neighbor looking out the window at that moment. All I know is there would be a second video of that dance on the internet from a different angle, lol.

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад

      @boduke9428 haha, if you find it, be sure to tag me…I mean Mr. Goblin! 😝

  • @richardpliml1079
    @richardpliml1079 3 месяца назад

    Excellent video...I'm in Australia and think your videos are awesome.... can't wait to get my Terminator.

  • @djtazzmtl
    @djtazzmtl 6 месяцев назад

    Also the steering upgrade is angled cause the rim rubs on the stock... If you have to much stering...

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад

      Gotcha, that makes sense.

  • @bradsrcsmore3848
    @bradsrcsmore3848 6 месяцев назад

    Very cool upgrades!! Love the Goblinator!! One of your best builds yet and wicked fun video!! Happy Fathers day 😁

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад +1

      This was tons of fun for sure! Thanks Brad! Happy Father’s Day to you too!

  • @richiesavino9653
    @richiesavino9653 6 месяцев назад

    Cool project man that thing looks sweet 🤙. Happy Father’s Day! My oldest son has the rc bug now too since I got him a granite so now I have someone to play with 😂.

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад

      Thanks and you too!!
      Haha, nice that’s awesome! Cant wait until Max can fix them on his own. Atleast minor stuff. Super cool!

    • @richiesavino9653
      @richiesavino9653 6 месяцев назад

      @@DerbyCityRC yes! lol out of my 3 arrmas one is always broken so there’s always repairs and upgrades

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад

      Oh ya. They all break 😅

  • @JFlyer1973
    @JFlyer1973 6 месяцев назад

    Ok ok ok… now… you have 2 choices and only one truck can go bashing…. Both mentioned here…. This upgraded Goblinator…. Or…. The AE Rival MT10 v2??? 🤔
    What’s yer poison???
    Thanks for another awesome vid bro. Your stuff is just GOLDEN!!! Happy Father’s Day brotha!

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад

      Read this yesterday and have been trying to decide 😂. I want to say for smaller jumps and ground control, the rlaarlo is more fun and has a more solid feel. The mt10 is bigger and still handles super good but probably would handle extra big jumps better but it still has its issues. I’ve broken the front chassis plate on my mt10 before and probably 3 bulk heads. The mt10 will usually be easier to get parts for, but I just waited about 5 weeks for my last set of bulkheads because they were back ordered. This is truly a hard decision lol Then the rlaarlo is cheaper too. Also there aren’t many upgrades for the mt10 yet. Theyre finally starting to roll some out though from 3rd parties, and rlaarlo seems to keep quite a few of their upgrades in stock most of the time. Ahhhhh!!!! By the way thanks for the awesome comment! 😊
      I guess I would choose the MT10. It’s faster without having to upgrade, even though I still think the motor and esc are underpowered for its size. The motor mount is a weak point too but there are finally upgrades for that. I’d put some 500k in the center diff on that one too Seriously though, can’t go wrong either way. lol
      Thanks man!!!!

  • @smokeyrameriz478
    @smokeyrameriz478 5 месяцев назад

    Those ZD racing tires are way too soft. I have the same set in 10th scale and 8th scale. The big ones came on the pirates 3. They turn into pizza cutters when you throttle it.
    Edit: thought about buying the basic chassis version of this car. Does anyone know if a 3660 motor will actually fit in there?

  • @OutofControl_RC
    @OutofControl_RC 2 месяца назад

    Oh man, you can't unsee that goblin dancing........lol

    • @DerbyCityRC
      @DerbyCityRC  2 месяца назад +1

      Silly creatures they are!! 😂

  • @richiebledsoe1006
    @richiebledsoe1006 6 месяцев назад +3

    Happy Father's Day

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад

      Thanks!! You too, if applicable! 😃

  • @djtazzmtl
    @djtazzmtl 6 месяцев назад

    You can fit shorty 4300mah batteries, using the stock esc position and add tne extra handkes for the big battery conversion.

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад

      Sweet! What brand battery?

    • @stefanosk80
      @stefanosk80 6 месяцев назад

      @@DerbyCityRC Zeee

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад

      @user-yl6bh1xi8l gotcha, ya I’ve seen those!

  • @ellc.6143
    @ellc.6143 6 месяцев назад +1

    Bro I Fu!@#s your vids! Straight to the point 👉🏼 with a little humor between, good insight on a lot of the smaller trucks and truggies. In witch I started ASS BACKWARDS! LOL, Started with 1/8 scale, but I find smaller scale alot more fun easier and cheaper. Anyways, you're the only channel I'm subscribed to. And I watch them all. Kudos 👏🏼!!!

    • @Hungrybird474
      @Hungrybird474 6 месяцев назад

      Evan is the dude .

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад

      Really appreciate that man! I definitely like having all the sizes but I’m right there with ya. When I get a 1/10 scale or higher out, it’s like a “treat.” Typically run 1/16-1/12 because I can worry less about breaking. Super cool man I appreciate that 🤜💥🤛

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад

      Thanks dude! 😊

  • @qualitydirtmoving
    @qualitydirtmoving 6 месяцев назад

    Yes these are my favorite type of videos 1/10th scale basher videos those are also my favorite rcs as lways thanks for another great video and
    👍

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад +1

      Nice!! Glad you like it man! Thanks and you’re welcome!!

  • @jamesstephens5144
    @jamesstephens5144 6 месяцев назад

    What would it take to make it run on 4S

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад

      A higher amperage system. 100 amp atleast would probably be best.

  • @magnusstone
    @magnusstone 2 месяца назад

    Derby!! Which would you pick for an ultimate mini basher that will see some skatepark use?
    Arrma grom
    Rlaarlo ROG1
    Omni Terminator
    LC racing truggy
    HBX 2997a/variants

  • @lyricofwise6894
    @lyricofwise6894 6 месяцев назад +1

    18:01
    That was unsettling for a second there lol

  • @reanchotimothy
    @reanchotimothy 6 месяцев назад

    Happy Father’s Day derby rc

  • @douglasperry1226
    @douglasperry1226 6 месяцев назад

    Nice Gobllinator dance dude!😂

  • @BobbyS-dg3zl
    @BobbyS-dg3zl 6 месяцев назад

    WE HAGE BEEN WAITING FOR THIS VOD FOR AGES ❤ LEZZ GOOO ITS FINNALLY HERE 🎉🎉🎉🎉

  • @snuzum06
    @snuzum06 6 месяцев назад

    That's a lot of teardown you did for those upgrades, very nice. You ever listen to Nekrogoblikon? Your dance moves would work nicely with their music 🤣

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад +1

      Thanks!! I had never heard of them until I watched his interview on “Rock Feed” a few months ago. Thanks for reminding me I need to check them out 😂😂

  • @DutchRc010
    @DutchRc010 6 месяцев назад

    Nice video !👌🏼

  • @NathanStorer-RC
    @NathanStorer-RC 6 месяцев назад

    Pushin' cushion lmao! I'm all about that cushion for the pushin' 😂

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад +1

      Haha! I was wondering when someone would comment about that 😂

    • @NathanStorer-RC
      @NathanStorer-RC 6 месяцев назад

      @DerbyCityRC wasn't going to get by me, that's for sure lol 😆

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад

      @NathanStorer-RC 😅😂😂

  • @chadbywater
    @chadbywater 6 месяцев назад

    keep up the great work

  • @chrisperrywv
    @chrisperrywv 6 месяцев назад

    That wheel taking flight 😂 yo- just ordered mine. Did you sort out that bolt that always bends on the shock tower?
    Also- video recommendation- you should consider grabbing an ND filter for your GoPro for broad daylight- your shaded backyard clips look great). I don’t have a modern GoPro but I feel like it would make the visuals a little less crunchy. I could totally be wrong. I always enjoy the content.

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад +1

      Haha, right!? Yes I put another new bolt in it. Worked well just took a big hit in that corner.
      That’s good info as I know nothing about filters and such. Where does the video look crunchy? Like always or in certain areas? I do my best to stay away from the shadows. Where I really need help is close up shots. They’re so blurry. Like when less than a foot away. Maybe it’s just the camera but it’s the DJI Osmo Action 4. Surely that can be better. Lol

    • @chrisperrywv
      @chrisperrywv 6 месяцев назад

      @@DerbyCityRC crunchy in the broad daylight (to my eye at least) it has to do with the shutter speed- the camera opens and closes the shutter very very fast to compensate for so much light to not overexpose the frames. When you add an ND filter it’s kind of like putting sunglasses on the camera allowing the shutter to stay open a bit longer. Technically it makes it a little blurrier (most ion blur) but it also looks more natural when you get the number right. The general rule of thumb is 2x your frame rate for shutter speed- looks like you shoot 60fps so your shutter speed should be 1/120th of a second to get “natural” or “cinematic” looking video. These are guidelines- and the videos aren’t bad looking- just a bit crucnchy. lol. A 32 or 64 would probably work in that sunlight (I’m guessing- I don’t have that camera but my magic air 2s needs a 64 in broad daylight but I don’t shoot 60fps so 32 probably would do).
      Sorry for the info dump. You don’t need to do anything. Only a suggestion.

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад +1

      @chrisperrywv Thanks for the good info man. I’ve been considering shooting 30fps. Would that help anything or be worse in some ways?

    • @chrisperrywv
      @chrisperrywv 6 месяцев назад

      @@DerbyCityRC that’s largely personal preference. You’ve got the right order down- your content is compelling so anything further is icing on the cake. 24fps is traditionally what movies are shot in so if you ever wanted to do some cinematic sequences that’s the spot - but you have to nail down the shutter speed like I said before or it won’t turn out right(I’m not familiar with using DJI action cams so I’m not sure if there is a manual mode. If there is you’d want to set it to 100 ISO, 60 fps and 1/120 shutter speed, or 30fls 1/60 shutter speed or 24 fps 1/50 shutter speed and then get an ND filter that lowers the exposure enough where nothing is peaking, meaning getting it dark enough so that the image isn’t all white and over exposed).
      30fps is traditionally used in tv shows, specifically soaps, and 60 (or more) is what sports are shot in. I’d say 60fps suits your content, but like some of your shots for your RLAARLO Jurassic video would have looked sick in 24fps.
      Bottom line and for simplicity sake I think your style suits 60 fps.

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад +1

      @chrisperrywv awesome info, thanks again and I will try to find that filter 😃

  • @-xirx-
    @-xirx- 6 месяцев назад

    Thank you. Whadda champ!!

  • @jamesvetter5526
    @jamesvetter5526 2 месяца назад

    Love your videos bro keep rocking them out

  • @alantaylor353
    @alantaylor353 6 месяцев назад

    OHHHH YEAH.!! 👍 👍 👍

  • @workingclassperson2124
    @workingclassperson2124 6 месяцев назад

    Happy Father’s Day DUDE!!

    • @DerbyCityRC
      @DerbyCityRC  6 месяцев назад

      Thanks MAN!!!! 😃😊😊