Hey!! Rack-a-tiers is my family’s biz, so thank you so much for your amazing video! You’re too kind and generous. Yes, a lot of thought, energy and time go into inventing, creating and mfg all the tools. I’ve worked for the company for over 20 yrs (I’m Ken’s daughter Tessa) and watching reviews like yours makes it all worth while. So happy you’re spreading the love. We should hire you!!! Take care my friend ❤
Hey Tessa! I love your guys products! You do a fantastic job. I have connected with you guys on instagram @americanelectrician if you ever need to get in contact. Glad you enjoyed the review!
The tape measure holder is nice, but I've noticed that it's MUCH easier to clip ON your tape. Pulling your tape off of the clip requires two hands because of its design. I've found that I have to hold the very bottom part of the leather (past the clip) with one hand while pulling off my tape with the other
But you didn’t buy them 🤷♀️. Also. Did you say you would rather remove a piece of dry wall and resin stall it? How do you undo the joints? Wouldn’t it be easier to just cut a hole in the drywall?
I didn’t buy them but I was also very clear about that in the words. I take out the piece of drywall that I cut out if it’s been screwed in. This allows me to find the screws instead of breaking the piece where it’s been secured at
Wonder if that tape comes with the other 98% metric needs of the world and red, black, blue phase for the apprentie? That magnet is boss level and there is no better way!
Nice stuff brother! Rak-a-tiers have a saved me soooo many times! I have their MC or flex spools, and their wires pullers for staggering wires on the end of the fishtape save soo much time! Also, that level is just wide enough to use as a spacer for between conduit when you run conduit racks on uni-strut.
Man I had a tape clip or impact clip in 2019 from the company I was with and someone stole it ! When I had asked for another they didn’t have anymore … getting this thanks bro
Noice!!! Can’t wait to see the new updated loadout. You should review the Klein 11 in 1 ratcheting impact rated screwdriver. And maybe the Amazon Denali. Another RUclips channel said the Amazon has the highest torque in its class. I’m considering attaching the Klein bit from the 11 in 1 to it to get a beast of a screwdriver.
I've been watching out for this video. You replied to one of my comments that you were going to order the Crocs. Keep an eye on the v cutter blade, Mine came out on some old stiff sheathing. I super glued it back in, and it's been flawless since. I love my knipex forged wire strippers but for my veto mb2 troubleshooting bag, the Crocs are a much more versatile pair of all in one wire strippers.
Levtech mad dog 4. It’s not any better as far as functionality, but it’s a third of the weight. I’m a big proponent on shaving weight off my tool belt.
Low volt guy here and I personally use the crocs, one of my favorite strippers BY far. The reason I love them is number one ergonomics is amazing on those things and then, of course, the krimper for beanies on the bottom just works so well. Also, the cutters on them just seem to last forever.
Hey!! Rack-a-tiers is my family’s biz, so thank you so much for your amazing video! You’re too kind and generous. Yes, a lot of thought, energy and time go into inventing, creating and mfg all the tools. I’ve worked for the company for over 20 yrs (I’m Ken’s daughter Tessa) and watching reviews like yours makes it all worth while. So happy you’re spreading the love. We should hire you!!! Take care my friend ❤
Hey Tessa! I love your guys products! You do a fantastic job. I have connected with you guys on instagram @americanelectrician if you ever need to get in contact. Glad you enjoyed the review!
@@americanelectricianit is not me that manages the instagram. But tell Brittany that I approved you to get some more free product to review 😊
Canadian electrician here
We love and use all your items
Good job
@@TessaLainsburyi will definitely tell brittany that! Thank you for the free products!
The tape measure holder is nice, but I've noticed that it's MUCH easier to clip ON your tape. Pulling your tape off of the clip requires two hands because of its design. I've found that I have to hold the very bottom part of the leather (past the clip) with one hand while pulling off my tape with the other
What tape are you using?
Great video! Reps for Western Canada here. Best to you!
Thank you!
Do they make the tape measure with the Canadian phases?
Canadian rep here. Not yet, but in the works
But you didn’t buy them 🤷♀️.
Also. Did you say you would rather remove a piece of dry wall and resin stall it? How do you undo the joints? Wouldn’t it be easier to just cut a hole in the drywall?
I didn’t buy them but I was also very clear about that in the words.
I take out the piece of drywall that I cut out if it’s been screwed in. This allows me to find the screws instead of breaking the piece where it’s been secured at
Wonder if that tape comes with the other 98% metric needs of the world and red, black, blue phase for the apprentie? That magnet is boss level and there is no better way!
Gr8 looking in black - over time I now prefer bright colours on tools just so I can find them easier and not leave them behind.
Think out of everything I’d like to try the level, but after a week of use on my level I’m sure I wouldn’t be able to read the back
Warning the blades fall out of those v cutters rendering them useless cause you can't replace the blades.
Dam just got some today
Will try them out tomorrow
Nice stuff brother! Rak-a-tiers have a saved me soooo many times! I have their MC or flex spools, and their wires pullers for staggering wires on the end of the fishtape save soo much time! Also, that level is just wide enough to use as a spacer for between conduit when you run conduit racks on uni-strut.
Have you checked out checkpoint’s level?
Can you make a video on how to strip MC cable?
Man I had a tape clip or impact clip in 2019 from the company I was with and someone stole it ! When I had asked for another they didn’t have anymore … getting this thanks bro
Noice!!! Can’t wait to see the new updated loadout. You should review the Klein 11 in 1 ratcheting impact rated screwdriver. And maybe the Amazon Denali. Another RUclips channel said the Amazon has the highest torque in its class. I’m considering attaching the Klein bit from the 11 in 1 to it to get a beast of a screwdriver.
I've been watching out for this video. You replied to one of my comments that you were going to order the Crocs. Keep an eye on the v cutter blade, Mine came out on some old stiff sheathing. I super glued it back in, and it's been flawless since. I love my knipex forged wire strippers but for my veto mb2 troubleshooting bag, the Crocs are a much more versatile pair of all in one wire strippers.
Never seen Croc's before, I want to try em out
Crocs have been my favorite strippers for the last 15 years. They aren’t great as pliers especially if you twist.
15 years is a long time! I love them so far
Real question how do you think the durabilty stacks up against a stanlet fatmax
Solid. It’s super well constructed
Really hope you do a long term review on the level. I’ve been eyeing it but haven’t pulled the trigger yet
Get the Klein level, the version with the screw. Won’t be able to find a better level than that.
Levtech mad dog 4. It’s not any better as far as functionality, but it’s a third of the weight. I’m a big proponent on shaving weight off my tool belt.
@@DubG89 just ordered one to try 😂
Thanks for the recommendation, it looks like a good product.
@@tomaslekkasI have that one already
The Level,,just a black Greenlee level,,, both are good levels 👍
This is what i was thinking lol
That level looks pretty nice. I wish they weren’t quite as focused on residential but their nut snugger is legit
It does look nice but I’m not sure it does anything that my Klein or Milwaukee doesn’t do. Maybe I missed something
I feel like that v cutter will just get in the way....
Low volt guy here and I personally use the crocs, one of my favorite strippers BY far. The reason I love them is number one ergonomics is amazing on those things and then, of course, the krimper for beanies on the bottom just works so well. Also, the cutters on them just seem to last forever.