Это видео недоступно.
Сожалеем об этом.
Prusa MINI Review // So far ...
HTML-код
- Опубликовано: 17 авг 2024
- Prusa MINI Review! The first 1000 people to use the link will get a free trial of Skillshare Premium Membership: skl.sh/3dprint...
Buy a Prusa MINI 3d printer
3d.pn/prusamini (aff)
Tom Sandladerer Prusa MINI Review
• The next "BIG" thing: ...
MAKE Magazine Prusa MINIFirst Look
• First Look: The Prusa ...
Uncle Jessy Prusa MINI Initial Impressions
• Prusa Mini 3D Printer ...
Jo's tweet
/ 1182327383703117826
Prusa lead times
help.prusa3d.c...
Sydney smashing print from stream
• Unboxing 2 Prusa MINI ...
Nothing sticking to textured PEI sheet
/ 1304308238892982272
Phone stand tweet
/ 1305309560458981376
Sunshine engine benchmark
• Print in Place Engine ...
Alexandre Chappel camera arm
• 3d Printing a $10,000 ...
You can support what we do in many way!
Buy me a coffee: buymeacoff.ee/3...
Ko-fi: www.ko-fi.com/j...
Patreon: 3d.pn/patreon
Floatplane: www.floatplane...
Follow Sean Connelly on Patreon:
/ theseanconnelly
Follow David Tobin on Instagram
/ david_tobin
Cool Links to Awesome Stuff
Nikko Industries - AWESOME stuff to print: bit.ly/3lK0WHi
Printed Solid: 3d.pn/printeds...
FilamentOne: 3d.pn/filamentone
Amazon: geni.us/shopat... (aff)
Matterhackers: 3d.pn/matterha... (aff)
Proto Pasta: 3d.pn/protopasta (aff)
Prusa: 3d.pn/prusa (aff)
Puget Systems: 3d.pn/pugetsystems
Channel Merch Shop : 3d.pn/shop
--------------------------------
Find Me Socially!
--------------------------------
Twitch : / joeltelling
Twitter : / joeltelling
Facebook : / 3dprintingnerd
Instagram : / joeltelling
Discord: / discord
--------------------------------
Want to send me something?
--------------------------------
3D Printing Nerd
PO Box 55532
Shoreline, WA 98155
USA
Music provided by futurevega.sou...
Royalty Free Music by www.audiomicro....
FTC Disclaimer: A percentage of sales is made through Affiliate links
Dude! That's so cool that you've started printing the parts for the camera arm! Great video ✌️
It is going to make his life a lot easier filming his vids.
Thanks for designing that, I'm going to be making one soon. It's overkill for my little mirrorless, but too cool to not make.
Yes indeed, very cool, he did mention it a few times in several videos. I'm going to do something like that too...
I don't have the space or need for the full rig, but I'm thinking of adapting the design for my space.
Hello Mr. Chappel
THAT RATTLE IS THE KEYRING ON THE USB STICK, MAKERS MUSE HAD THE SAME ISSUE!
I hope he sees this
Yep, had me wondering too until I removed the keyring 😂
So did I, took a while to figure that out haha.
Wait seriously?! It's been driving me crazy!
really? Mine is the bowden tube, the filament is tapping it from the inside by the extruder during retractions. I stopped using the included flashdrive right away because it doesn't have a clear right-side up
Broken thermistor, bad bearing, and random rattle are not “minor” for a newbie (which is likely the target demographic) and represent some quality control problems. Could be a one off problem or something more systemic. Nevertheless good review Joel.
It seems like he has an early version. I remember the first few batches has issues like these.
My model from Sep 20 had similar issues and more. It’s not just the early models with problems.
I've had mine for about 6 weeks now and put about 300 hours on it already, its a bloody workhorse.
I have been running my mini almost continuously for 6 months now. The extruder makes a funny noise when it retracts and sometimes I hear a rattle, but it prints fine so I don't care. Compared to the constant TLC my first printer needed when I was a newbie a few years ago, this thing is a dream. It just prints well all of the time.
@@GdalyaRoth my first 'real' printer was a Prusa MK2 and it still works very well (though is showing its age). After purchasing a CR10, I do know what it is like to have a less feature-rich printer that needs more attention. I always recommend Prusa over anything else I've used.
Thanks for showing off the engine benchmark! :D I'll might have to try to get my hands on one of these minis at some point!
The Prusa Mini also has issues with jamming and clogging as well as with the Minda probe. Before you buy, I recommend reading their forums. I owned mine for about five weeks, during which time I only printed Prusament PLA using default settings. I had to (at the direction of Prusa support) completely take apart the extruder four times and the hot end twice, eventually replacing the entire hot end with a new one they sent me. Over the course of five weeks, the printer spent about half that time down for parts and repairs. Prusa support was excellent throughout, but at the end they agreed my unit needed to come back (at my shipping expense). Overall, it was a big disappointment. If you had a different experience, I’m happy for you. Mine wasn’t great.
I almost bought one of these until I found out that it does not have an all metal hot end and no one can give me a solid answer if you can upgrade the printer to have one. I understand that Prusa may be trying to keep this printer from being copied, but it already has been copied and the clone is half the price.
@@MichaelJHathaway The clone is not half the price. It's more like $300 vs $440. And then you have to replace some parts that are not good enough...
I purchased my I3 Mark III as a kit; I had some problems with it, mostly due to errors in assembly. Eventually, after about three months, I returned it to Prusa and exchanged it for a pre-assembled model. I've had occasional issues with it over the last year, most notably a broken thermistor wire, which was an easy fix. I also had to replace my hotend, as mine had gotten fully jammed with PETG (that one was ALSO my fault).
I've probably spent around $300 over the course of the year, but my printer is working like a champ. The print quality is still very, very high, and the reliability is awesome. All I really have to due is to insure there's enough glue stick applied to the PEI sheet, and my first layer goes down great; once I have a good first layer, the rest is easy. I could probably tweak the settings better - I do get some stringing now and then - but overall, I'm really happy with this machine - which is now a Mark 3S (the upgrade ended up being free - thanks, Josef).
If the Mini is even half as good as the full-size, then I'd say it's an excellent buy. Before buying, I watched Maker's Muse, Tom Sandlanderer -- and of course, Joel; however, it was really Joel's review of the I3MkIII that put me over the top and helped me pick this printer over others I was looking at. I've been a fan of his ever since.
TLDR;
Please consider donating some money to the Seattle Children's Hospital. It's a really worthy cause, and we all need to help somehow.
I have the complete same experience ... seems to be a well paid review like the most here ... forums are full of problems with this machine... i have also a creality ender 3 which has also things to update, but no problems so far and the print quality is better for a lower price, bigger printbed. I am very disappointed that you have to pay for a bug of prusa the shipping expense by your self!
@@tamgaming9861 In my experience, Joel's reviews are completely honest. He's not getting paid to review these machines. Yes, he's getting one for free -- but his opinions are still honest. He breaks down the plusses and minuses of each machine. I mean, if he weren't honest, would he have reported the problems with the machine? No.
To everyone who's USB drive isn't recognized by the printer: You can try changing the partition table of the USB stick from GPT to MBR, as some printers don't like GPT. How you can do that? Open command prompt as administrator and enter "diskpart" > "list disk" > "select disk X" > "clean" > "convert MBR" > "create partition PRIMARY" > "select partition 1" > "format fs=fat32 quick". Just make sure you select the right disk, cause this is gonna wipe it. When done, the printer should have no problem recognizing the USB stick.
I was figuring this as a condition. There's no reason Y U can't just use a different USB stick in place of the troublesome one as it's fixed up. They R EZ to come by.
@@SaltGrains_Fready What exactly are you trying to tell me? No one ever said anything about, not just buying a replacement one everytime your Mac or some other device reformats it as GPT instead of MBR. If that's what you want to do, I am not gonna hold you back. You do you, as for everyone else who isn't willing to buy a new USB stick everytime it gets reformatted as GPT, my solution should be simple enough.
@@XXDoMi77 I mean rotating them not just replacing all the time. Y does it always go to GBR in the first place..?? I uses only pc's for everything - I abandoned crapple 5 yrs ago after 25 yrs of bondage with them.
My USB stick stopped working, I popped it into my Mac, formatted it for MS-DOS and it works GREAT. Faster than ever. Love, Love, Love my Mini+. I get great prints and think Joseph Prusa is DA MAN!
That stack of filament had me triggered.
in the last few seconds of the video they fell
@@florianix8272 I know but it was blurred.
I was happy to see it was still almost falling over at a later cut. I was sure it fell over when he bumped it with the box :D
I absolutely love my prusa mini. I have not had any issues with my machine so far and i love it to bits. I really appreciate having a machine i can trust to just work right out of the box and not give me trouble. If i even need to buy another machine i would get this one again in a heart beat.
Hi I have two Minis and a MK3S Prusa Printers. Like you I find the Mini to be a great machine, so much so I do not now use the MK3S unless the model needs a bigger building plate. Thank you for your entertaining and instructive videos.
Great review man! I had no idea Alexander had files for that camera arm!!!!!!!!!! Must find out more!
www.alch.shop/shop/p/3d-printed-sliding-camera-arm
He has some great videos about different make things. love that channel
could be fun to watch one of you guys trying to assemble this arm :-D
Would be epic
Ur a frade
That camera arm is amazing, also cringing at the filament tower lol!
6:14 those spools are really close to falling over
in the last few seconds of the video they fell
That was an easy prediction it seems: 13:46
pure chaos
Every time there are some "layer inconsistencies" or imperfections of some sort Joel (and others) blame it on "the filament is not calibrated" or "settings not tweaked". Why is that? If there would be one instance where calibrating would be worth the time it would be a 3d printer review? I don't think this is fair
I have that issue even with Prusament. Some guy with bondtech extruder also has that problem. Apart from that, the printer is great
Over extrusion causes adhesion issues
This is called Issue 602, every printer has it and Prusa did alot a research to combat this issue.
I agree i would say that he is biased. Honestly its not bad for the price but an ender 3 would do similar if not better
Yeah the 'filament not calibrated' doesn't make sense to me, sounds like Joel's printer suffers from the same over/under-extrusion issues that some other reviewers had, because the filament almost jams, causing underextrusion, then the jam starts moving and causes overextrusion.
We got ours last week for printing work test pieces it's been printing constantly over the weekend getting to understand it's limits. Really happy with the print quality in the past I've sent prototypes out and have had them made in SLS and SLA and honestly would be happy showing them to customers. I did have an issue yesterday when the extruder started clicking which I was disappointed about but the documentation on the website had me back up and running within an hour and I think I could sort the same issue out in 10 minutes now. One of the key reasons I went for it was the price point, the reputation of Prusa, but also being designed and engineered in Europe it has to meet certain safety standards which for me was a big selling point.
I can't stop looking at that stack of filament roles teetering on the edge... It even starts wobbling for a bit on the verge of falling.
You've inspired me to take the plunge into 3D printing and I have purchased this printer. Love the videos. Keep being you!
How do you like it? I'm looking at purchasing it as well!
@@nickungefug364 I absolutely love it! The interface and community backing this printer are incredible. However, be prepared to wait (COVID). I ordered a kit in December and got it in March. It's worth it!
@@steveoffutt7591 Thank you!
Joel the fan noise can be fixed by putting 1 or 2 drops of machine oil in the back of the fan (behind the sticker). That fixed it for me on a couple BTT fans.
for anyone that is having the rattling problem its the part cooling fan mine does the same but I got a new one
Love your videos and it was a great review, but I really feel like you took it easy on Prusa here. Bad bearing/fan, making noises, bad thermistor, bad USB stick, a few print quality issues. I've been debating getting a second MK3 or a mini (or 2), but with issues like that there's no way I'd get a mini.
Hi Joel, thanks for the reviews and info, keep it up. This year I tried to become a Prusa boy too but failed. I bought a Mini with high hopes but sadly a major design flaw sent my mini back home and my Prusa boy membership was no more. Anyway enough of the banter. The MINDA type level probe is a huge problem in environments where the temperature is not constant. The trigger level varies with temperature. My print farm lives in out buildings which are not heated at night so the printers start cold in the morning and warm up through the day. The Prusa mini will not consistently level in this situation. The results are high first layers, nozzle dragging across the expensive print bed and prints stuck so tight to the bed that the bed is delaminated when removing. I don't have 30 minutes to set up the printer level for every print and there is no manual bed level option so the Prusa mini was totally unsuitable for me. Prusa appear to have attempted to cover up this issue by setting the minimum start temperature to 15C. This also renders the mini unusable for me for about 5 months a year. Buyer beware. The mini is great for indoor heated rooms but is unsuitable for colder print farm rooms.
I second that! I had to improvise a construct with an enclosure, blankets ontop and hot waterbottles inside to get my Mini working in 12°C surroundings (my garage).
This is just dumb.
I have to leat it warm up at least one hour before I can even think of trying a first layer calibration.
Prusa should have mentioned this when advertising this product. INDOORS ONLY!
I am very happy with my Mini. My USB stick also failed after a few prints, and I have noticed a occasional rattle while printing. But since my first Benchy (which printed flawlessly) I have been extremely pleased with my printer.
I started with an ender 3 and loved it but wanted to get a printer with bed leveling and quality. So I researched and purchased the mini. Best decision works great. The stock flexible bed is perfect for pla which I print in most often. Good buy.
I have had my Mini for about 3 months now and I can only partially agree.
While it works absolutely fine (despite a lot of stringing) with Prusament, it was a complete nightmare with cheaper filaments.
Naive young me thought it would be a good idea to purchase a plain white RYKE PLA spool from Amazon for prototyping.
Oh boy. That was a mistake.
I easily spent 10 hours of my freetime trying to get this stuff to even extrude properly.
The nozzle constantly clogged and the extruder jammed regularly with this material.
However, after hours of trial and error, cold pulls and extruder cleaning and idler tension adjustments I found a solution that worked somehow.
I used a 0.6mm nozzle and printed at 230°C, which was the only way to get a proper extrusion.
However, even with that milestone, I had some molten filament drip out of the hotend, like ABOVE the heaterblock, where the hotend is screwed into the heater block.
This requires regular removal of molten PLA in hourly intervals during printing. Not cool!
I tried to print that crappy filament away as fast as possible before something else went wrong and I was so happy when I could finally return to Prusament.
Tldr: if you consider buying a Prusa Mini, do yourself a favour and stick to Prusament only. There are a lot of reports of people complaining that other filament brands just don't work on this machine.
I learned it the hard way.
For that price I can think of other printers that will do just as well- including ecosystem- and give me more space to print. But what works for you, works for you.
I think the prusa mini is a perfect beginner 3D-Printer. I got mine in July. It's so easy and self-explaning.
Easy building, Plug it in, Load filament, Plug usb-stick in, Print one of the example-models or slice something with the standard settings in prusa slicer. I think it works like a charm. I had NO problem until now.
One thing I really don't like is the single Z-Axis, but the printer is stable enough.
I've been using the Mini for about 8 months now and it has gone through hundreds of prints. I keep it well maintained and only had to replace a single nozzle and PTFE-tube (the one it came with was too short). I keep having to adjust the settings though, while every screw is checked. I am getting a lot more stringing now than 8 months ago. But all in all it is holding up pretty well.
I probably would have chosen the MK3 if I had to choose all over again, but all in all it is a nice quality little printer.
I've loved my mini so far. But out of the box it was very picky about filaments, with some heat creep issues. Strongly recommend the 3d party heat break upgrade. It fixes all the layer inconsistencies and works through any filament brand now. Also, the included USB flash stick developed bad sectors after a while that caused prints to fail/halt. Seems like I'm not the only one that had to throw away that stick.
I bought a Prusa Mini this summer and it did take 8 weeks or more to get here. It is a great replacement for my Printrbot Simple Metal. I also couldn't get good results from the rough build plate and switched to the finer grain build plate. I too have the runout sensor. I have been using the color change by level feature of the Prusa Slic3r to give prints like my Ezekiel's Wheel puzzle a more interesting look. So far it's been great.
The MINDA probe is a nightmare for consistent mesh bed leveling. How much money could they be saving from using the heated PINDA probe?
This!
The minda is shit.
I had to place my Mini in my garage where it has roughly 12°C during winter.
If I don't give my Mini at least 1 hour of warmup-time inside its LACK enclosure the first layer calibration will be different between each and every print. So annoying!
If you also intend to operate your Mini in cold surroundings, you will soon recognize that it refuses to even heat up when the measured temperature is below 15°C.
My fix to that problem was placing a waterbottle with hot water ontop of the bed and moving the hotend close to it.
After the bed has reached ~17°C you can heat up your enclosure with the bed itself.
Protip: to keep the temperature constant over time cover your enclosure with blankets and place at least two other hot water bottles next to your printer. They work essentially like heat-batteries and can keep the air in the enclosure warm for about 8 hours straight! (With constant heatbed output that is!)
I've had my Prusa Mini since the beginning of September. I haven't encountered any problems related to the printer so far.
Nice! Got a FlashForge Finder in August.
@@enhidri160 how's the flashforge. It was super loud for me.
@@scifi_shop Mine is fine, it's been working well Not the best quality, but a good longrunner.
Finally!!!!!!
I love your videos and i've been waiting for this review.
The moment I saw a Prusa mini on a blue background I knew....
Tell maker's muse I'm waiting for him too :)
Two prusa mini's in our school's lab and they had severe jamming. Tried lots of hot/cold pulls, disassembling and reassembling, and reseating the ptfe tube in the extruder. If the tube is deformed or a particle gets stuck in the nozzle, the parts have to be replaced or at the very least for the ptfe tube flipped 180. Did not realize it was a single drive extruder until opening it up.
They are functional, just need something a little more than a beginner's knowledge to keep them running which isn't too unique for the $450 price
@npgoalkeeper _ tried the needle a few times and the printer jammed again in less than a minute of printing. The needle has worked before on other printers just no luck with the prusa mini
I crank up the first layer to 265C for PLA to get it to stick really good. Your slicer should have an option to do this.
Joel, I love your channel and I love my mini!!! I had the same two issues with mine. The noises near the cooling fan are caused by the wires that are so close. Just pull them away from the fan and it's good to go. I solved the USB drive issue by using a USB extension cable. Not sure why that worked. I think it has something to do with the physical connection.
That leaning tower of PLA had me stressed out waiting for it to fall. :)
I've been waiting for your review on it for so long. Keep coming looking for it :D Thanks
The stock USB key was DOA on my Mini. Worked fine on PC, but would crash mid print.
The Prusa Mini is my first printer and has been awesome!
Great video Joel! I think the Prusa mini is really nice with great features. Is the Prusa mini open source?
Is Josef prusa rich as a mountain troll. Dumb question.
@@usernamel-f952 but it is open source...
I got this 3d printer a couple weeks ago, and I love it so much! It works so well, prints so smooth, and is super easy to use. But one interesting I noticed is that the red pla 1.75 Hatchbox filament printed better than the Royal Blue prusament. Does anybody know if there is a way I could get better prints with this filament? But overall it’s a great printer for the price.
Do you use prusaslicer?
@@thegeniusman8757 sorry, didn’t see a reply. It’s 6 months later now, but yeah I do use Prusaslicer
Loved the Video , Hope to see more of the construction of your over head video Camera Arm . Stay healthy and safe !
for the raddling did you check to see if was just the key chain ring on the usb stick, It has happened to me multiple times
I ordered Sovol SV01 (my first) on Thursday at 10 am. On Wednesday at 10am I already had the printer. Absurdly fast international shipping. Many reviews praise this printer, but it is a relatively unknown. Tomorrow after work I will put it together and post info on YT as I get the printouts.
Good review. You put a lot of effort into the video 👍
I love that your making Alexandre's rig. I just discovered his channel it is amazing!!!
Thanks so much i was waiting for this. Awesome video btw
Only 8 weeks now lol when I ordered in Feb 2020 it took until July to arrive ! Have just fitted the Bondtech extruder upgrade and about to fit the Bondtech heat break component which hopefully will resolve the inherent design issues of the 'standard' Prusa product. It galls that one has to pay extra for those Bondtech upgrades and replacement bowden tubes (like overall about $100) despite acknowledged design faults. It is a great printer but the clogs once they begin never go away and hopefully they will be gone with the heat break and extruder. So, be prepared to add another $100 and wasted time and effort fixing the printer. That said, when the printer is at its best, then it is superb.
it's a prusa, it does what a prusa does, simply prints good like a prusa should, and for 350 bucks it's not bad at all compared to the mk3
we have our mini for a week now and it's a great printer, plug & play prints, no Z-axis fiddling, no violent removing parts from the bed, great print quality. No complaints at all. We have two "old" Felix 3D printers and quality is night and day, for 1/5th the price.
what about dimensional accuracy like thickness in X,Y and Z and squareness?
How did the thermistor fail repetitive movement, or did it get caught on something?
Great review Joel, as always
I got a Mini+ and it’s due to arrive on 2021-07-29. Will be making lots of parts for my Raspberry Pi:s.
Great review. I love my Minis. I use them in production line with my MK3Ss and they're all just great. For the bed thermistor, I had that issue on one and Prusa sent me a replacement that arrived in 3 days. About that USB stick that came with the MINI, it's garbage, just toss it. Neither of mine ever worked from the start and many others have reported the same. Keep up the great work!
I just kept staring at the precariously balanced filament spools... I can say, my Mini is a "here's the print, usual make sure the first layer is good, walk away" printer. It just works.
This is my 2nd time watching this. both times watching I sat here waiting for the spool stack to fall over LOL
I've got mine few months ago, I printed PLA, ASA and FLEX, without any problem. Just a cohesion issue, but was my fault because I didn't washed the bed. A great idea is to make an enclosure (mine is a foto enclosure like prusa suggested), ASA and FLEX are in an close box with silica gel.
I also have the rattling and cooling fan spin-up noise problem, but on the MK3-S.
What solved the fan problem for me was loosening the fan screws by half a turn so that the fan housing does not warp. After all, the fan hardly weighs anything (and the fan housing isn't very strong). I don't know if that works for the mini fan though.
For the rattling I have to investigate further, but it might be a belt grinding somewhere.
Thx for your awesome videos!
Sorry for all the "fans" in my post, but I'm a big fan :-)
The clicking you’re hearing is the extruder. There’s another video out there about this and he actually fixes the issue. I recently fixed mine but not well enough because the issue came back just a few days later. I had to: do a cold pull, unload the filament, completely take apart the extruder to access the large extruder gear inside and clean off inside the teeth on the filament gear with a steel brush. Then I removed the Boden tube that connects to the hot end and hand to loosen the 3 grub screws to be able to move the heatbreak around. I added thermal paste to the outside of the heatbreak and put it back in the hot end all the way up. The issue with this printer is that a small gap forms between the boden tube and the heat break. Bondtech actually has 2 products to fix this issue.
I had the same thing.
But I solve it with thingtening the ptfe tube à little more than noticed.
I screw the joining part, then unscrew it an half turn. (maybe 3/4)
Push the heatbreak to the top and lock it with 3 little screws.
Then screw the joining part to the max.
With this method I solve the underextruction du to the gap.
I had to clean the heatbreak perfectly to remove all the melted pla. (done it without the bowden and the joining part, with a wooden stick hotend at 250°C)
Looking forward to seeing more on the camera arm. Nice review and awesome T-shirt.
Reason I am posting this is my recent neighborhood challenge, my machine vs. the original PRUSA. You might find this interesting. Just 4 months ago I entered the 3D printing world. Now, what machines did I start with? I was checking out snapmaker, as I thought how cool it would be to have 3D printing, laser and CNC in one unit. I then found Dobot MOOZ. For about 3 weeks I suffered with printhead jams and bed adhesion issues. Then I actually learned how to load filament correctly, surely different machine to machine. I now straighten 5 inches of filament, and I mean nail I preheat the nozzle to 200c and I gently feed it though the filament sensor that detects filament run out, then through the feeder gears. If filament is not nail straight it can, and has, run amok and tangled in the gears, now I have achieved perfection. Next the adhesion issues. Watching videos I tried painters tape, hairspray, glue stick, and FINALLY the solution that works like gold for me. The cheapest Elmers school glue. The one we remember as kids, the white, soap and water clean up. Ironically it seems stickier when still the cloudy white BUT wait till it fully dries to clear and, perfect stick. AND, as a bonus, just put a couple dabs of water on the dried glue, and the glue will remain on the build plate if you allow the bed to cool after printing. A couple dabs of water to make it that creamy white, let it dry to clear again and its reusable for about 5 or 6 times on the same Elmers glue bed covering. MANY MANY complaints on this Dobot MOOZ but this is funny. My neighbor has a PRUSA, the original. I actually get better prints than he does which stunned him. I did hook up with a second printer for a larger print volume, Sindoh DP200. BUT the MOOZ prints are significantly sharper but the Sindoh helps me with larger print size requirements.
For that noisy fan, if you pull of the sticker on the fan, you can oil the bushing. I have to oil mine pretty regularly.
I HAVE ONE. probably will get another soon. the issues are spot on, but way less than anything else in the price range.
There is a known issue with bad USB sticks sent from Prusa. I got my Mini about 3 weeks ago, mixed results so far, but the only machine failures I've had were related to that USB. Had 3 failures with watchdog error resets because the USB stick they sent preloaded with files is physically bad in some way. everything i have sent through octoprint has worked great, everything printed with prusament looks great. now I just have to tune for stringing on this MatterHachers Build PLA.
Now that it's been a while, is the Mini still working well? I have been thinking about getting one. Thank you for the review.
So far, for me it’s been a workhorse. I’ve been using it on my print farm and it’s been a great consistent worker.
I started with mine 2 weeks ago, it's going pretty well so far; no major issues to report. I can't quite get PLA to stick to the textured PEI sheet either, but I'm putting that down to me being a noob.
Asked my parents for this for christmas.
Edit:didn't get it until my 18th birthday
The random rattle is the extrude they all do both of mine do it and it works fine
Hey, that sound your mini does... If its still not solved, check if the cables from heater and termistor are not touching the fan.
My solutions to your mini problems:
I find that with a little bit of stringing it can get caught in the fan and make strange noises,
I had rattling but it was just the filament sensor tapping against the spool
And if you make folders on the USB key it won’t read it which is annoying because you can’t organize it but just buy small cheap flash drives and label them or have two and alternate
Hello there, what temp did you print the Extrudr filament with? Great video by the way! I love the engine model, too, that guy made a v-twin version and is planning on releasing V8 and stuff! :)
Buyers beware, buying a Prusa have high chances of becoming a Prusa fanboy.
I was very disappointed with my Mini, but I did receive prompt and responsive support from Prusa. I’d buy another printer from them, though probably not this one.
Nothing wrong with that. You have a Prusa, they are nice...
That's what we call confirmation bias.
Hi Joel, I've been using the Prusa Mini for quite some time now and I absolutely love it! I had some technical problems in the beginning. There was a problem with the extruder but thanks to the awesome helpdesk I was able to fix that. Also my usb drive had a problem and it took me quite some time to figure out that was why the printer wasn't printing properly (it wouldn't let me change the settings during print anymore).
This being my first 3d printer it was a bit of a learning curve but now I feel I really understand the machine. Great stuff!
So... Lets see if I have this summarized correctly...Issue 1 - remove ring from memory stick. It will resolve an irritating vibration... Issue 2 - During first assembly, lubricate all the linear bearings. Will likely resolve some premature bearing failures... Issue 3 - Consider replacing the extruder, or more likely replace it if you get print failures or jams... (I'm going to replace it with a Mosquito, I think. It's lighter and should put less strain on the arm.) Issue 4 - Thermistor wires getting broken. These wires are really thin. Investigation needs done involving the "human factors" related to the thermistor. The only way I can think of where people do anything near the thermistor is when they change or clean a nozzle. If anyone uses wrenches or pliers, they need to be really careful with the wires. I think those were the issues mentioned here... Oh and Joel is not paid to do these reviews... ;-)
I had the same problem with the USB Stick. It works fine on my PC but not on the Mini. Tried to reformat and tried different printer firmwares. Other sticks work fine.
I just finished assembling my first Prusa, a MK3S, right then this video dropped.
N I O C E
Well that is one type of timing.
USB drive: Make sure its fat32 with 4096kb cluster size. the fat32 driver on the board is fairly simple so its quite particular.
i am using my cr6-se creality white filament in my mk3s on default prusa settings and just love it it prints so good.
About the USB, you could try to format it. Both windows and Mac have a built in tool.
What layer height do you use for test prints?
I had the same problem with the USB stick. Only mine wouldn't read from the start. I just grabbed another one from the drawer, not a big deal, but I could see it being a huge deal for a noob that might not have USB sticks laying around or the troubleshooing skills to realize its just the drive and not the machine. Overall it's a great little machine though.
I ordered my Mini a few days ago (my first 3D printer). These next 8 weeks are going to suck. 😩
the fan is cuverd under warrantie... Same issue here
Really glad other people are having success with the Mini. Maybe one day I’ll buy another and try it again.
Great video! I am considering setting up a small print farm, and for the price and size, this might fit my needs....could get almost three of these for the price of one Mk3!!
That's awesome it's so small and looks portable as all heck nice review Joel
I can never get layer lines like this :-(
did you assemble the printer yourself?
Nice review. Also enjoyed the live stream with your daughter. I've been running my mini sort of in production based type scenario. I really, really love that after the part is done, I just remove the stuff from the build sheet, and "reprint" click to start again. It's been consistent. Couldn't say the same for my Ender 3, unfortunately. I tried, I really did. I hope I can sell the goods im making, and buy a 2nd Mini
Hmm why does Prusa get a pass at glaring QC issues? I find it very odd that if an Ender had those problems it would be blasted at half the price. I just got into 3d printing but my custom Ender 3 Pro is better than this thing and was cheaper.
This is the most enjoyable printer I’ve had. That’s not objective at all but it is what it is. I’ve had Ultimaker S3, BCN3D Sigma R19, FLSUN QQ-S- Pro, Qidi XMax, Prusa MK3S and a few resin printers.
The usb stick - same issue, seen a few comments suggesting its just a bit of a poor quality stick.
Can’t wait to get my hands on one of these! The lead times are pretty long. Anyone else wish we had a Prusa factory stateside? If I were to win the lotto, I would absolutely look into it)))
Joel, I had that same issue with the USB Drive not reading in the Prusa but being read fine on the PC, I noticed if I just pulled it out without ejecting it wouldnt work, so if I ejected it safely then it would read. weird, but now I just use Octoprint and skip that step all together.
Interesting review! I know others have had a lot of complaints about that direct drive setup. But you certainly don’t seem to have that issue at all! High Five!
I loved watching Alexandre print them all and assemble everything! This really is tempting to pick up the mini (well in 2 months lol). That's a great price and would be nice to have a desktop size versus my Predator.
nevermind I saw the later part but I know what is causing it its just the wire touching the fan
I'm just waiting for the tower of filament rolls on the left to fall over! Ohhhh the suspense!!!
Just skip to the last 15 seconds 13:40
@@JoeStanfordDoughty I know, I know, I saw it after replying 😉
To get the textured plate to stick I had to wash it thoroughly with soap and water (not the mini but its big brother). The before and after difference was amazing.
I had the same problem with two of the mini usb sticks. I fixed it with not changing usb stick while it‘s powered on. I don‘t know if it kills USB sticks but i saw little bit electricity while changing the sticks.
Had the same weird noise on the y axis. I used a mechanics stethoscope and moved the y axis backwards and forwards to narrow down where the noise was coming from. Mine seems to stem from the y axis idler pulley area but replacing it hasn't worked