Thank you. I'm an Inventor/Fusion 360 user learning Solidworks for a new job. So far Solidworks seems perfect in that it is Inventor and Fusion 360 combined. Makes sense to me.
This is my first video on surfaces, I thought they were more difficult but your explanations make me feel more confident to make them, thanks bud. Great vid
I'm learning so much from your briliant tutorials, amazing how you can do such complicated stuff with simplicity style of yours....good job, keep up the good work. thanks.
Thanks for this video, very well done. Just a thought though, if you could put the video number in the title, it would be easier to follow them in order. (Solidworks Surface Tutorial 1: Basics, Solidworks Surface Tutorial 2: Surfaces, etc) Thanks again!
okay, very nice tutorial. i went through all steps without any problems, till the last two parts. i failed to trim off the 4 corners after filleting them. nothing happens when i click on the parts. secondly, i can't find the thicken surface tool. it is just not included on the surface tools menu.
Would you mind making a tutorial for crawler crane cat 307cc ? Or at least how to make boom of crane and caterpillar track for cranes, please , please . I am really at a loss here with my project(I have to submit it in a week).
it would be nice if we can have the video how to the paint thickness on solid part and amount of the paint to use on the part when create in solidworks
After selecting the trim tool, it will not select the body, clicking on it does nothing,, will not even highlight. Tried many times. Any suggestions????????
Hello Metab Bhai... Mai aapke channel ka new subscriber ho. Mai abhi 1 used laptop purchase Karne ka plan kr raha hu Mai Janna chahta hu ki Kya___ 8 GB RAM, i5 2nd gen. (Intel HD Grafic 3000) & 320 GB HDD pr CAM program normally run karega ?? Meri sahi madad ke like aap___ Dell latitude e2520m Laptop ki details dekh ligiye please. Mai yahi laptop purchase Karne Wala hu.
Currently teaching myself how to model surfaces and this is one of the most clearly-explained videos! Thank you!
I have learnt more from this channel than the university, thanx a lot
knowing the Flip connectors is a life saver, many thanks! I wasted many hours figuring out what s the issue
Thank you.
I'm an Inventor/Fusion 360 user learning Solidworks for a new job.
So far Solidworks seems perfect in that it is Inventor and Fusion 360 combined.
Makes sense to me.
I'm a design executive....and your videos helped me and my whole design department....a lot
sir where r u working
@@shylack9537 faridabad haryana
This is my first video on surfaces, I thought they were more difficult but your explanations make me feel more confident to make them, thanks bud. Great vid
best cad cam channel all over youtube, many thanks!
I'm learning so much from your briliant tutorials, amazing how you can do such complicated stuff with simplicity style of yours....good job, keep up the good work. thanks.
Thanks for this video, very well done.
Just a thought though, if you could put the video number in the title, it would be easier to follow them in order. (Solidworks Surface Tutorial 1: Basics, Solidworks Surface Tutorial 2: Surfaces, etc)
Thanks again!
Wow! I was so intimidated by surfaces until watching this. Thanks so much
Easy to understand with good explanation. Thanks for your dedication from Korea!
Ohhh man
where have u been?
We need awesome tutorial for spending a day
i fall in love with this video.....oh man u covered all things in a very better way.................
Very good video. I have no idea what I want to make but least I know how to use the tools.
I thank you for all your videos; they have helped me a lot; Thanks again for your time.
Very good teaching😊
New subcriber! thanks alot for this amazing tutorial, first time doing a surface model and this was a huge help!
This video was packed with useful information, thank you!
Great Teacher
Great video, thank you !
well explained , thank you
Fantastic tutorials, am learning a lot. Thank you.
Great stuff! Thanks for the great explanation.
Your videos are great! I've learned a lot in a short amount of time. Can you tell me, what shortcut key do you hold to rotate the view like that?
he presses&holds the scroll button in the mouse
Very well done, learned a lot, thank you. Keep'em coming :)
Useful introduction to the surface tools !! tks a lot !!
okay, very nice tutorial. i went through all steps without any problems, till the last two parts. i failed to trim off the 4 corners after filleting them. nothing happens when i click on the parts. secondly, i can't find the thicken surface tool. it is just not included on the surface tools menu.
Would you mind making a tutorial for crawler crane cat 307cc ? Or at least how to make boom of crane and caterpillar track for cranes, please , please . I am really at a loss here with my project(I have to submit it in a week).
thank you so much...hope u do more surface ??? i want to learn it but i don't have file to learn...
Please make Vedio on analysis in solid work.... example material mass weight etc
Sir please do full design of any one special purpouse machine.
this helped a lot thanks
Just like a wow ❤
Thank you sir for your work
You are the best!
While invoking boundary surface command is it mandatory to use line command in 3d sketch mode.
Sir pls share some more modals using by surface command......
Wow amazing 🔥🔥🔥
it would be nice if we can have the video how to the paint thickness on solid part and amount of the paint to use on the part when create in solidworks
Thanks, great tuition!
very nice teaching
Tell me best pc or laptop configurations to run solidworks smoothly
Great tutorial as usual, good job sir
Thank you for using many commands can you produce one more video by using all commands?
nice explanation
Thank you so much very good video, do you know what technique is used to manufacture kinde of this metal arc ?
punching using a die can be used for sheet metals
sir great work
iske age ke tools ka video link
After selecting the trim tool, it will not select the body, clicking on it does nothing,, will not even highlight. Tried many times. Any suggestions????????
had the same problem. U just don't create the projected curve and select the original sketch as trim tool
simple and awesome tutorial!
Thanks a lot for the video
It's found it really useful, thanks!
Very good video, thank you!
very good ,thank you
thank you sir
Why do boundary when u can simply fill the surface?
excelente tutorial...!
great tutorial
Have you done inverse engineering on a scan prototype with solid works!
Can you turn on the subtitle, thank y
This is awesome thanks for your tutorial I subscribed.
why did you do flip connectors ?
Is it possible to create human body in solidworks surface
Thanks a lot
great tutorial thnx a lot
pls upload more surface design sir.....
im having a self intersecting surface problem on creating semi circle surface at 8:13, what to do?
Thank you
Сколько расплодилось художников, и все лезут в машиностроение, сидели бы в архитектуре, там +- метр нормальное явление
thank you too much , i dont find thickness option on my solidworks !! any syggestion??
@LUQMAN HAKIM yes i got it thanks , plesae I need help would you help me?
Thank for the Video
Ok I didn't use "Surface" to extrude now it works fine
The Trim surface is not the same on solidworks 2019
thanks for the video..
great vid,
Thanks
Thanks keep going
Brilliant
Nice sir
thanks youu
Sir suru sa sekho naa har ek cammand jisa ki hamko toolbox me jana ka bad gear nahi show ho rah ha window pa😢
Muito bom!
Thanks sir
Excellent.
Tanks!
Hello Metab Bhai...
Mai aapke channel ka new subscriber ho.
Mai abhi 1 used laptop purchase Karne ka plan kr raha hu
Mai Janna chahta hu ki Kya___ 8 GB RAM, i5 2nd gen. (Intel HD Grafic 3000) & 320 GB HDD pr CAM program normally run karega ??
Meri sahi madad ke like aap___ Dell latitude e2520m
Laptop ki details dekh ligiye please.
Mai yahi laptop purchase Karne Wala hu.
you cant Run Latest CAD software's, for CAM its OK, if you like to choose above configuration try old version of software's.
Old version !!
Like ???
try 2000,2005,2010, dont go for new version like 2018,2019 software, it will hang your system.
CAD CAM TUTORIAL ok thank
Sir how to download and install solidworks software?pls guide me
While invoking boundary surface command for developing surface is it mandatory to use line in 3d sketch mode.
I really appreciate your teaching. Can you set up a paypal or something I will donate a few dollars.
thankss you
Please tell me whether you understand my comment or not
Can we speking wthi WatsAAP
Можно было и проще сделать, много лишних элементов
😮
+10
Flip 'conntramani' 🤣🤣
Great video. Thanks!
Great work - thank you!
Thank you sir