This video was really educational and allowed me to speak intelligently to the parts suppler I deal with. For a DIYer ordering over the internet, this video is a slice of heaven. Thank you for a much needed tutorial.
Very educational! A family member ordered a complete set online and the diverter had too much stem on the base and no-one from the 2 giants (hd and lows) had any knowledge of the specifics. Was a complete waste of time and of course didn't carry this specific piece. I now have more than enough knowledge to shop the online store. Thank you
Tim, Six years ago a family member gave us two upscale, quality bathroom faucet sets for our new house. I was guessing they were not made in the US but lost track of the box they came in. (Despite having installed a number of different faucet sets with cartridges peaders please note not to make the mistake of losing any literature that comes with them if only the manufacturer's name. ) So I was faced yesterday with a leaking epiphany that surely some intelligent and caring American already had all that knowledge AND had taken the time to share it. Mr. Google helped me find Tim who has prepared this extremely well organized, easy to understand, definitive, and packed with lots of helpful hints which are going to save me, and possibly you the reader. A big thumbs up Tim. Jack Davis Sarasota, FL
Home Dumpo Expo had a lot of import shower valves, tub valves, roman tub valves, as well as faucets. They went belly up and all the aftermarket replacements are not Ca. lead-free compliant. So you find it then need to go to Arizona "one way or another to get it. Of course our actual water from the municipality has more lead in it than any of these parts ever did.
Hi Turbo Tim, I have a dilema with replacing stem cartridge for an old Pegasus Faucet. I know the right part number: 3S-11C and H. The problem is the cap to hold the stem completely crumbled and I am having a difficult time finding someone who actually carries these caps. Without the Caps the stems just shoot right out of the socket when I turn the water on. Your assistance is greatly appreciated!
Hello, Those caps are hard to get. If it uses a delta style cap then you might be in luck. Those are available on my site. We will need to get the measurements to see if it will work. www.faucetpartsplus.com
Your examples are not exhaustive. The one I have is different both in terms of spine, mine is 20, and overall design. Still trying to figure where I could get my hand on one to fix my leak. Failing which I will try changing the washers. Thanks
Trying to identify a shower valve for cartridge replacement. Single handle not push pull rotates first cold then hot. Has splines for handle not square
That's only works if you have a hardware store near you that has every part ever made. Otherwise, you may have to order it from the internet. "Revised" The people you take it to have to be knowledgeable about faucet parts. Otherwise, your probably wasting your gas.
That doesn't work. I took my stem cartridge out and took it to 2 hardware stores only to find out they don't carry it nor could they tell me the size so I could go find it from a plumbing supply store, so this method is the only way I could figure out a close enough size.
This video was really educational and allowed me to speak intelligently to the parts suppler I deal with. For a DIYer ordering over the internet, this video is a slice of heaven. Thank you for a much needed tutorial.
Very educational! A family member ordered a complete set online and the diverter had too much stem on the base and no-one from the 2 giants (hd and lows) had any knowledge of the specifics. Was a complete waste of time and of course didn't carry this specific piece. I now have more than enough knowledge to shop the online store. Thank you
Tim,
Six years ago a family member gave us two upscale, quality bathroom faucet sets for our new house.
I was guessing they were not made in the US but lost track of the box they came in. (Despite having installed
a number of different faucet sets with cartridges peaders please note not to make the mistake of losing any
literature that comes with them if only the manufacturer's name. ) So I was faced yesterday with a leaking
epiphany that surely some intelligent
and caring American already had all that knowledge AND had taken the time to share it. Mr. Google
helped me find Tim who has prepared this extremely well organized, easy to understand, definitive, and
packed with lots of helpful hints which are going to save me, and possibly you the reader.
A big thumbs up Tim.
Jack Davis
Sarasota, FL
Very helpful, i appreciate the breakdown on important measurements.
Thank you for this video!
Amazing detail and clear instruction, really appreciated!!
Thank you.
Thank you!
Home Dumpo Expo had a lot of import shower valves, tub valves, roman tub valves, as well as faucets. They went belly up and all the aftermarket replacements are not Ca. lead-free compliant. So you find it then need to go to Arizona "one way or another to get it. Of course our actual water from the municipality has more lead in it than any of these parts ever did.
Thanks mate,i dont have the old stems but i can measure the fitting to get the ball rolling.
It's www.faucetpartsplus.com Thanks
Hi Turbo Tim, I have a dilema with replacing stem cartridge for an old Pegasus Faucet. I know the right part number: 3S-11C and H. The problem is the cap to hold the stem completely crumbled and I am having a difficult time finding someone who actually carries these caps. Without the Caps the stems just shoot right out of the socket when I turn the water on. Your assistance is greatly appreciated!
Hello, Those caps are hard to get. If it uses a delta style cap then you might be in luck. Those are available on my site. We will need to get the measurements to see if it will work. www.faucetpartsplus.com
My stem doesn't have splines to count, it is smooth brass. The rest of it is white plastic. Do you have any of those?
Your examples are not exhaustive. The one I have is different both in terms of spine, mine is 20, and overall design. Still trying to figure where I could get my hand on one to fix my leak. Failing which I will try changing the washers. Thanks
You spelled your website wrong in the intro. The site you have shown seems suspicious.
Trying to identify a shower valve for cartridge replacement. Single handle not push pull rotates first cold then hot. Has splines for handle not square
Just send me a picture of the cartridge. I should be able to find a replacement. faucetpartsplus@yahoo.com
बहुत अच्छे spandle हैं
What's the fourth one's brand or model? (from left to right at the begining of the video) I'm actually looking for that exact one... 🤔
www.faucetpartsplus.com/product_p/412165.htm
This is the link to that part
That's more difficult than it needs to be. Why measure? Just take out the old one, remember if it's for hot or cold and go to hardware store.
That's only works if you have a hardware store near you that has every part ever made. Otherwise, you may have to order it from the internet. "Revised" The people you take it to have to be knowledgeable about faucet parts. Otherwise, your probably wasting your gas.
That doesn't work. I took my stem cartridge out and took it to 2 hardware stores only to find out they don't carry it nor could they tell me the size so I could go find it from a plumbing supply store, so this method is the only way I could figure out a close enough size.
Aside from open sourcing , the dame things should have brand names on them , at least on the faucet !
Should be called “how to measure your Cartridge”
THEY ARE ALL CERAMIC TYPES, NOT very helpful