@@nhabenuocchaychiahai9640Это не для скучающих пенсионеров ,а для бедных. Голь на выдумки нужна. Я пенсионер, но такой херней в жизни не буду заниматься.
Yes, let me take an afternoon, clean up a slimy oil can, sand it, fabricate a special bolt and fashion a drum sander I can probably buy at Harbor Freight or Home Depot for cheap. A waste of five minutes of my life. What's the purpose of these videos? to demonstrate people's mechanical skills?
The purpose of this video is to weed out all the whinny witches before the future gets here....a future where there are no more whinny witches....for some strange reason.
"Perfect for polishing wood", he said. I think he meant to say, "Perfect for ruining whatever you happen to be working on." Please "Fix it fast", FIX IT FAST and stop putting crap all over the internet!
Because even if it's worthless, yt can make money out of the ads, and they used to drip a tiny bit of it to the uploader. Only if the vid fits their agenda.
You can buy this tool and sandpaper drums, threaded rod would save cutting off bolt head, grinder could screw directly into adapter, mounting filter to grinder first and useing it spinning to sand off paint would save labor. Wire brush, special adapter, and double stick tape would cost more than proper tool, tape wouldn't hold up very long. All in all, I give this a D-, or F.
I just learned that you can spend more money, more time and get a lesser sander than what just cost a couple buck to get the real drum sander. I make videos to help people like this guy.
@@FixItFast1 : No. It's not at all worth the time or monetary investment to do so. It is much easier and smarter to use the correct & readily available tools & expendable products for the needed task.
Ladies and gentlemen, after having watched this content creators skills and technique with power tools, I can confidently predict that here we have a budding contender for a Darwin award. It's really just a matter of time.
Normally I complain about loud music. In this case I think the music needs to be louder to completely drown out the dialog. Dumb idea but you get what you wish: a click and a comment.
When I cut a hole in wood I always save the cutout piece for later use, like glueing sandpaper on it, or for spacers. Doesn't cost me anything and gives me several different sizes without any extra work. Take that, you "Fix It Fast"!
He keeps presenting the components like he is some sort of magician, and yet, there is never any magic or even a punchline. I guess the magic is not getting injured when that filter comes flying off at 3600 rpm. And you do know, right, that the bottom arbor of that grinder comes off, too, right? Ima need my five minutes back.
@@ronsamborski6230 : Actually, it's not even simple. It's a lot of time, money, and effort wasted just to make an inferior tool. A tool to be used in lieu of other tools that are much better that are already readily available.
After moving everything around like a magician to show the top, sides, front and back, I was expecting a rabbit would've been pulled out of the final product.
Because it makes the video even longer. Therefore more ads can show up, so more money for the emperor! Yeaah! Tbh: I'd ban such contents from the entire internet.
It doesn't matter how many times I hear it, the term "hack" to me still means someone with no discernible skills doing something that they are not capable of doing properly.
@@FixItFast1 - one look at your gloveless hand next to the cutting wheel tells me how else it might work, too, if it skids off the workpiece and sends you to the ER, faster than you can say "Richard Cranium". Lots of useless, inane and galactically stupid stuff "works" if your on a desert island and have no alternative but I'm guessing you're not in that category. However, you persist in attempting to be your own best candidate for the Darwin Awards. I can use a perfectly good microwave oven as a fishing weight but that doesn't mean it makes sense or is worth doing.
Would be way cooler with it filled with old grimy oil when you spin that old filter!!...drill couple small holes on the side right before going full send with it!!!...No safety glasses and a big smile will cause more likes for you!!!
Huh? No PPE, cutting sandpaper with scissors to dull them. What was the purpose of removing the paint from the filter? Where’d the special bolt come from? I have a sanding disc and wire brushes for my angle grinder.
I love watching people who think they are smart handymen, who come up with dumb ideas on how to waste their day and effort to make something that cost them so much, knowing that they can buy a tool that works much better, much safer, cheaper, does not need to modify a tool they already have, and lasts a thousand times longer than what they are making. 🤷♂🤷♂🤦♂🤦♂
I have been building sanding barrels for over 50 years. I've been a lathe operator, tool and diemaker, cabinetmaker,....and You, Kid, are NUTS.That has got to be one of the biggest waste of time "projects" i've ever seen.
You can buy better sanding drums--of all sizes--almost anywhere. Just because you CAN do something doesn't mean you SHOULD do it. Besides, that hump where your sandpaper overrides is going to leave marks in your work--every revolution.
I’m retired have nothing to do at all through the day but watch these dumb things. And I still wouldn’t waste my time on this one.
Same here!! what a complete waste of time!
Đó là một therapy cho những người về hưu nhàm chán không có gì để hoạt động chân tay 😂
REALLY !!!
@@nhabenuocchaychiahai9640Это не для скучающих пенсионеров ,а для бедных. Голь на выдумки нужна. Я пенсионер, но такой херней в жизни не буду заниматься.
same
Впервые оставляю такой коммент:
На хера я это смотрел!?👎🏻
Отрицательный результат тоже результат! ☝️😂
Чтобы узнать, как проще всего сжечь УШМ!))
I watched it also and I have no idea why.
Не ты один😅
Достали уже эти попрошайки и побирушки, идиотам надарили телефонов, теперь недоблохерами все дружно стали, клянчат деньги за просмотры.
With this same method, I filled the oil filter with holes and made a cheese grater.
The only problem is that the cheese flies all over the room....
😁😁😅👍
lol!!
Now, just invent something to recover the cheese- ( whatever you do, don't CUT THE CHEESE )
Grated cheese probably tastes like used motor oil, too. Actually, the grated cheese would wind up packed into the oil filter, umm.
Ah,ha,ha! How about callous removal.
Yes, let me take an afternoon, clean up a slimy oil can, sand it, fabricate a special bolt and fashion a drum sander I can probably buy at Harbor Freight or Home Depot for cheap. A waste of five minutes of my life. What's the purpose of these videos? to demonstrate people's mechanical skills?
AMEN MY BROTHER, WHAT A WASTE OF VIDEO TIME. I WENT STRAIGHT TO PORN SITES TO REGAIN MY SANITY !!
Maybe he doesn’t have a car?
The purpose of this video is to weed out all the whinny witches before the future gets here....a future where there are no more whinny witches....for some strange reason.
Käse 😅😂
Hilfe 😅😅😅😅😅😅😅😅😅😅
"Perfect for polishing wood", he said. I think he meant to say, "Perfect for ruining whatever you happen to be working on."
Please "Fix it fast", FIX IT FAST and stop putting crap all over the internet!
No $hit!
Столько бесполезного движения, когда можно это сделать из деревянной заготовки и меньше затрат на производство.
Если фильтр от грузовика поставить на большую болгарку эффективность увеличится в пять раз😂😂😂
We are all now dumber after watching this video.
..not me, I was wearing B/S Detect&Reject goggles..!!
..so at least you can now validate Donald Trump 'the rapist' clown as POTUS 🤡👍
I'll say
I want my 5 minutes back.
@@rafaellastracom6411 me too 😂😂
Just one question - Why???
It has to be a troll, a click troll!
Pretty obvious why it isn't patented
Why waste all that time when there's multiple products already on the market that performs better???😢😢😢
Because even if it's worthless, yt can make money out of the ads, and they used to drip a tiny bit of it to the uploader. Only if the vid fits their agenda.
@@baladar1353 exactly, he and YT make money on the wasted time of the millions of viewers
You can buy this tool and sandpaper drums, threaded rod would save cutting off bolt head, grinder could screw directly into adapter, mounting filter to grinder first and useing it spinning to sand off paint would save labor. Wire brush, special adapter, and double stick tape would cost more than proper tool, tape wouldn't hold up very long. All in all, I give this a D-, or F.
@seekerstan : Oh, I'll do ya one better. Grade this guy's idea an F - . 😂
Well that's 5:44 wasted I can never get back. Actually less because I skipped ahead, but still...
What a waste of time
@@dennisisrael640 yes a waste of viewing time
I actually thought that person was sent to a psychiatric hospital. But I see that he is active again.
I wonder if they gave up treating him? 🤣
From looking at this clip, it would seem that he is already beyond any hope of improvement!
I just learned that you can spend more money, more time and get a lesser sander than what just cost a couple buck to get the real drum sander. I make videos to help people like this guy.
I should have gone with my gut feeling and just blocked this channel without watching the video.
You can do it every time, but I'm wondering why youtube won't delete such channels. Actually I think I know that.
I usually just buy a flapper disc and put it on my grinder, they work awesome
Well, isn't this option interesting? Wouldn't you like to make one?
@@FixItFast1 ..ma va a kagare..!
@@FixItFast1 : No. It's not at all worth the time or monetary investment to do so.
It is much easier and smarter to use the correct & readily available tools & expendable products for the needed task.
@@turbodiesel4709 And Safer!
I have a belt sander thank you
A belt sander is great. This "contraption" would make round grooves in everything! 🤦
Nice! An inexpensive, easy DIY hand and face deleter.
And it will probably ruin whatever you're sanding as well.
I Retire my used oil filter by throwing it in my neighbors garbage can
This made my arse leak
Sit on a champagne bottle
If it your arse leak, your not using the tool correctly 🙄 😉 🤣
Complete waste of time when one can simply use a off-the-shelf drum sander.
Ladies and gentlemen, after having watched this content creators skills and technique with power tools, I can confidently predict that here we have a budding contender for a Darwin award. It's really just a matter of time.
Normally I complain about loud music. In this case I think the music needs to be louder to completely drown out the dialog.
Dumb idea but you get what you wish: a click and a comment.
Sandpapier mit der Schere schneiden ? ganz schlechte Idee ,für die Schere
Another RUclips example of "a goofy solution to a non-existent problem."
It's brilliant! Why such emotions?
Super, extraordinaire, génial, même Léonard de Vinci n'y avait pas pensé !!!
Ouais mais tu vois pas la progression toi, au début il avait essayé avec un filtre en carton 🤣🤣🤣 !!!
When I cut a hole in wood I always save the cutout piece for later use, like glueing sandpaper on it, or for spacers. Doesn't cost me anything and gives me several different sizes without any extra work.
Take that, you "Fix It Fast"!
He is so proud of his design. Dunning and Kruger are sitting back and thinking. Yup. A prime example.
No sé cómo pudieron llegar a la Luna,sin semejante artilugio 😢😢😂😂😂😂
Its like watching a Temu Macgyver 😂
He keeps presenting the components like he is some sort of magician, and yet, there is never any magic or even a punchline. I guess the magic is not getting injured when that filter comes flying off at 3600 rpm.
And you do know, right, that the bottom arbor of that grinder comes off, too, right? Ima need my five minutes back.
There goes 5 minutes I'll never get back.
This video is so informative and helpful, thank you for sharing it
Your next video will be "How to turn a coffee machine into a toothbrush".
glad I scrolled to the end
didn't like it? it's brilliant and simple!
@@FixItFast1
Simple, yes. Brilliant, no.
@@ronsamborski6230 : Actually, it's not even simple. It's a lot of time, money, and effort wasted just to make an inferior tool.
A tool to be used in lieu of other tools that are much better that are already readily available.
@@turbodiesel4709
I meant simple in that it’s not an overly complex device like a nuclear reactor. That’s all. 👍🏼
😂 I want my 5 minutes and 44 seconds back!
There's 5 minutes of my life I'm not getting back...
The 44 seconds were precious too
Instead of mounting it on your angle grinder plug it in the back of your telly and get every channel in the world absolutely free
@videos995 : 😂😂😂😂😂
After moving everything around like a magician to show the top, sides, front and back, I was expecting a rabbit would've been pulled out of the final product.
I can understand why he doesn't show his face and leaves the voice to a computer. You must have such an empty head in your family.🙈🙈🙈
Just because you can spin an elephant at 3000 rpm doesn't mean it's a good idea. ✌
And next week I am going to take a scooter engine, add some straps and a water tank and turn it into a garden sprayer - brilliant!
oh... I think I know why this isn't patented
Some people have too much time on their hand. You are fired !!!
very helpful
👍
208K views. Cash register goes "Kaaaah ching!".
I did this with a pineapple so I could have a snack when I was done sanding
Sump Oil & Pineapple sounds like catchy new flavour?
WHAT I DID INSTEAD WAS BUY A SANDING DRUM.
But my method works brilliantly
I'm glad I skipped towards the end, so I didn't end up wasting my time.
Yes, why sand off the paint? It’s not a problem, but taking it off is!!
Because it makes the video even longer. Therefore more ads can show up, so more money for the emperor! Yeaah!
Tbh: I'd ban such contents from the entire internet.
It doesn't matter how many times I hear it, the term "hack" to me still means someone with no discernible skills doing something that they are not capable of doing properly.
Whenever a video starts with "Why isn't this patented?", I've typically found it a waste of time & energy
My engine is going to like the extra sand in the oil!
Time is Money and that was just a waste of both😂😂😂
Whiner alert!
Or... Hear me out... We could've grabbed the sander that was next to the grinder.
Now I know what I can do with my old oil filters.Throw them away.
It’s not patented because some people have more brains than to take this sort of tripe seriously. .
Well, it works! You understand that it's your choice to repeat it or not, but the fact is that it works!
@@FixItFast1 - one look at your gloveless hand next to the cutting wheel tells me how else it might work, too, if it skids off the workpiece and sends you to the ER, faster than you can say "Richard Cranium".
Lots of useless, inane and galactically stupid stuff "works" if your on a desert island and have no alternative but I'm guessing you're not in that category. However, you persist in attempting to be your own best candidate for the Darwin Awards. I can use a perfectly good microwave oven as a fishing weight but that doesn't mean it makes sense or is worth doing.
Would be way cooler with it filled with old grimy oil when you spin that old filter!!...drill couple small holes on the side right before going full send with it!!!...No safety glasses and a big smile will cause more likes for you!!!
Hello, dear viewer! You are a real man! You got it! Thanks for the ideas - I'll take them into account for the next videos!🤩
man that reeks of effort
Huh? No PPE, cutting sandpaper with scissors to dull them. What was the purpose of removing the paint from the filter? Where’d the special bolt come from? I have a sanding disc and wire brushes for my angle grinder.
You cannot make a connecting bolt screw without a lathe. Since few citizens have access to the lathe, this use and procedure is irrelevant.
Or you could just buy an Orbital Sander or a Drum Sander that will do a much better job for a few bucks.
Well that was 5 minutes of my life I’ll never get back.
Yeah. Why isn't this patented? You should do that and get back to us on how that goes.
🤣🤣😂😂🤣🤣😂😂🤣🤣как он ловко нас всех развёл на 6 минут жизни !!!
I did the same thing by using a large hole saw, I needed to sand the inside radius of a part for a large UAV that I was building!
I take my old oil filters to Wal mart to be recycled .
In addition to the comments, all of which are correct, he used a cutting disc as a grinder, foolish and dangerous.
Sadly there are no videos showing such "masters" when the cutting disc shatters during drinding with them.
It looks like everyone else had the same opinion of this one...
Yeah, bunch of hateful folks.
$5 flap wheel lasts 30x longer
I love watching people who think they are smart handymen, who come up with dumb ideas on how to waste their day and effort to make something that cost them so much, knowing that they can buy a tool that works much better, much safer, cheaper, does not need to modify a tool they already have, and lasts a thousand times longer than what they are making. 🤷♂🤷♂🤦♂🤦♂
Whiner alert!
I have been building sanding barrels for over 50 years. I've been a lathe operator, tool and diemaker, cabinetmaker,....and You, Kid, are NUTS.That has got to be one of the biggest waste of time "projects" i've ever seen.
That's nothing. I can turn a kidney dialysis machine into a boat's anchor.
Oh shit, you forget to activate the bullshit detector - and you get caught...
Angle Grinders :-
Rule Number ONE
Only use them as Angle Grinders. ( Using them for anything else is asking for serious injury.)
Darwin award incoming
Im taking this onto 'Dragons Den" Deborah and Peter will fight over this!!!!
Here for the comments!! 😅
Well, at least they will make you happy
Так и думал, что металлической щёткой он себе руку поранит
It would've been much better to watch, I tell you.
WOW thats just what I need to sand the dent out of my new Porsche !!!
A Dent Won't "Sand Out", .. Porsche ......
@@kerriknight After I fill it with cement LOL !!
The thread on a lot of oil filters is the same as the headstock of my wood turning lathe . So I have a large supply of free faceplates.
I am now dumber for having watched this…
Whiner alert!
I agree!!!!! The TITLE of the video is CLICKBAIT!!!! He spent MORE time, money and materials fo a random size drum sander!!!😂😂😂
How to launch an oil filter across your workshop using an angle grinder a a propellant.
Всегда муть одна в этих иностранных видосах 😢😂 просто пипец
Почему иностранный? Это наши небось дрочью маятся. Главное назвать по иностранному.
Os comentários criticando esse trabalho, estão certissimos ! Fazer de madeira é 1000 vezes mais fácil e funciona melhor ! 😂😂😂😂
Wow! thank you so much
You should rename this video "The IQ reducer". Because I actually feel dumber after watching it.
Naw, you were that way to begin with.
This idea has been pattented. It's called a sanding drum. It fits on a a dill.
😂🤝 I love people with humor! I always answer them like that 🤗
To je opravdu neuvěřitelný nápad, taková hovadina by hned tak někoho nenapadla.
You can buy better sanding drums--of all sizes--almost anywhere. Just because you CAN do something doesn't mean you SHOULD do it. Besides, that hump where your sandpaper overrides is going to leave marks in your work--every revolution.
the hand gestures resemble those of a magician...
Whie the brain activity of the presenter...
на хера я это смотрел щас этих насадок копеечных в каждом строительном магазине
good
This is a good example of the internet being used to fool people.
You got me good just used up 6 minutes of quality life time
I gotta remember to read the comments first.
They are just a bunch of whiners.
WHY ????
This video is for people who don’t have a life.
Столько затрат и времени, а толку на грош...
Whiner alert!
Я увидел все инструменты новые, болгарка тисы, ножницы и прочее.
Вопрос: при таком раскладе зачем такой бомжрасходник?