The magnets work because as the anvil vibrates, the magnet has to accelerate towards the anvil since it isn't physically bonded, this lag is out of phase with the vibration so it has the effect of dampening it.
Excellent way to lock down an anvil! What you did would be considered "tornado-proofing" your anvil here in Mississippi. Th' shop might be gone, but the anvil didn't budge.
Reminds me of one of the smiths north of here after flooding a few years ago. A friend was helping to clean up scooping mud out with a skid loader. The loader came to an abrupt stop, he had found the 400 pound anvil.
@@BlackBearForge Do you happen to be familiar with sand underground for anvil or a sheet (2-3 mm, guess that's about 1/10 inch thick) of lead between the block and the anvil to reduce clinging noise? Anyhow mounting it on silicone seems to work awesome too, and with the extra metal clamps it will probably hold.
Awesome ! My anvil rings my hearing aids so much that I have to cut them off when using it - this system you developed should be the perfect answer to my problem . THANKS !!!
hey mate i wanted to say thank you so much i spent 3 weeks straight trying to change my mic and audio to stop the shattering anvil ring. it never ever occurred to me to fix (or that you even could) fix the anvil. thank you so so so much
@@Anon_Omis some people describe my voice as frog like shrill and my face as a bad face to beard ratio. I do have the best windows media player trasitions money didnt buy tho. People love them dont they?
RUclips, the place where I can learn to lock pick, blacksmith, cook, probably make lock picks, make it through prison, beat a game, learn about games, watch games, and do things with just my bare hands.
Hey Black bear. Use leather friend. It helps drastically and also looks good. Best place to wrap it would be around the neck of the anvil. Also, the ring helps with metal working anyhow. Take care and keep up the craft. Hopefully you can pass your craft off to a grand kid or child. These are crafts that need to always exist. I personally have been working with extracting iron from what most would just a call a rock. Cool stuff.
Whoa, that worked way better than I would have expected. Damn, the difference is amazing. The anvil is practically silent compared to the ring it had before!
I miss blacksmithing... As a child i was often at my godfather. He is art smith and makes realy cool things out of metal. Most of the time i made small items such as nails or small animals (a snail is realy easy, great for beginners). There was a history festival one time while i was visiting him and we where showing kids how small and easy things are made (again small animals, small metal smiley for the key and such things). That was great because that was exactly what i used to make and i had a great time while making everyone exactly what they wanted :D Good old times... I wish there where a bigger market for blacksmithing here in germany. I would love to work as one but you cant life from what you get paid because not many people want something handmade anymore. I like this channel, i will stay a while and listen ;)
Looks like you have a nicely appointed shop. A much simpler way to "deaden" an anvil is to attach a ring (2- 3") to a spring from a "bangety bang" screen door, and attach the other end of the spring, to the base of the anvil block. Then just slip the ring over the horn of the anvil. If you need to use the horn for a particular operation, then just slide off the ring. This kept my anvil quiet for more than 20 years.
Growing up the grandfather's were still alive & well. I would be included in any trip to another tradesman's shop. I clearly remember grandda giving any anvil he walked by a firm but gentle slap to listen to the bell ring. Although the opportunity is not very common; I walk in their shoes and will give an anvil a spank. It surprises me how many people who own an anvil don't know about the bell inside of it. Thank you for allowing us to visit with you at your shop.
Hi John! I just wanted to tell you how much this video helped me! I just started blacksmithing a short time ago and have a small piece of railroad track for an anvil. The first time I struck it, the sound was so loud, high pitched, and piercing that dogs 2 blocks away started barking. It was absolutely not going to work. But, a little silicone and strapped it down tight with some pipe strap and now it sings much more beautifully. Thanks for the video! It really helped.
This was in my recommended box because I watched a music video with the band Anvil, and I don't regret clicking on it. You're doing good work, algorithm.
As a longtime 'maker' and 'handy' type, but blacksmithing noob, I always learn so many additional little tricks from your videos, like for example those simple but cool custom-made clamps, and your general overall 'approach'... plus you're also a great teacher, thx!
My Grandpas anvil was mounted on leather to a tree stump buried in his shop floor. He had home made U clamps at angles that crisscrossed and fit into notches in the stump. It had a dull thumpy ring to it but didn't hurt your ears even after hours of use. Good vid, try the leather
Enjoyed that. Just bought my first anvil at 54 off a retired craftsman. It came on a big solid oak block of wood. I noticed that was bolted down onto the wood with plasticine underneath it. Now I know why. The anvil is pretty quiet tbh. It obviously works.
Thank you for this. I finally got around to doing some of this and it made a world of a difference my neighbors are probably just as grateful for you than I am now. ❤
I like your style!! I did nothing more than to make clamps to secure my hay budden to the block. It is solid and quiet. Other anvils have a rubber mat or chain wrapped waist with forged nails to secure in place. The clamps perform best. They serve to hold secure and quiets the ring to a thwack!
WoW! John, That really did the trick. I built a stand for my new to me 300lb Henery Wright last week and set it on a piece of belting. It helped but your clamp system is next. Thanks
thumbs up for you john! another instructive video. I will do the same thing as soon as I can get a real anvil. I got a notebook to take note and wear my safety glasses! lol hello from Belgium
Wow, what a great video! You explain things clearly and to the point. I must also say you are an excellent teacher. What a difference your anvil quieting project made. I watched 2 other of your videos before this one (your most popular one) Subscribed! Thumbs up! 👍🏼 PS I've been looking for a quality anvil for a while now, the large Peter Wright anvils are my favorite and it seems are the most rare & expensive.
My 308lb Soderfors rings loud I'm using a big tow chain and it helps a lot. That's the same way i put mine on the stump with a 2x8 ramp. I think I'm going to mount mine this way. Great idea.👍
Thumbs up for the dramatic improvement. I have some magnets on my anvil to keep it from ringing. But sometimes those magnets do funny things to what I'm working on. Which is annoying.
It most certainly is a "small" task, but a huge improvement. Working with that anvil will be a lot more pleasant as well, not just for the video quality. Great job!
When your welding magnets get completely wrecked with that iron dust, a lit oxy acetylene torch works well. Hammer the oxygen thumb valve wide open like you are about to start cutting. It blows and burns the fuzz right off the magnets without heating them up too badly at all. Old millwright trick.
That animal is strong as an OX !! He has been lifting and moving heavy stuff since he was in pampers i bet ! LOL He dont need help with that little steel toy ....
Spent many an hour listening to my dad’s anvil and my brother’s when they were shoeing horses and making things. I liked the ring then and I like it now.
Fantastic video! Love to see a good blacksmith problem solve. I have a thick h-beam as my anvil and using similar methods it was10/10 on noise to about 3/10. As you said, makes the process much more enjoyable for you and anyone watching. Well done!
There are thin sheets of elastomer vibration damping material available. Some have adhesive on one side. These sheets are very thin, and don’t look like they will do much, but they do. They’re also cheap. The aluminum 2 x 4 foot version from McMasterCarr, is about $30. I haven’t tried it on an anvil, but putting it on the bottom surfaces of the horn and rear, could help a lot.
Finally YT sent me to a type of channel I actually like, when I was 13 I experienced Blacksmithing for the first time and I've wanted my own forge and anvil ever since! Cool video especially how you figured out how to move the anvil by hand haha, I would've used an motor crane!
I built a sand filled metal base similar to the one in the book, Back Yard Blacksmith, by Lorelei Sims, for my smaller European Wrought iron laminated anvil, and I got to tell you, zero ring. Now I got to figure out how to eliminate the ring on my Pendinghaus, which is mounted on a wood base. I'm going to try a rubber mudflap and strap it like you did. I got strong magnets on it which helps, but they keep grabbing the metal from me. If that don't do it, I'll have to weld up another base.
I met Lorelei Sims a couple weeks ago and she showed me her anvil stand like that, it's ingenious. She had a friend with a nice HB anvil for sale that I ended up buying. You couldn't ask for a nicer, more helpful person to deal with, I even got a copy of her book too. Great experience for sure.
The anvil did tip somewhat during use, so the latest modification was to add 2 ea. 3/4 threaded rods welded to the bottom of the base, and thru the top plate the anvil rests on to apply compression to the sand filled column. Soon as the initial settling stops we shall see if the bolts will eliminate the tilting. One thing I like with this type of base is it is height adjustable. I really enjoy Lorilei's book, I think she did a great job and the photos are excellent. I have also copied her post vice stand on page 37 mounted to a large plate attached to the floor, and I am in the early stages of designing another one similar to the first, but with a 36" round base that you stand on while using, that employs the principle of opposing forces canceling each other, so no movement of vice stand no matter how hard you wrench on vice handle, while at the same time providing the benefit of merely tilting the entire vice stand and rolling across the shop floor to a new location when desired.
I dont own an anvil
I've never done any smithing
Shit I've never even seen an anvil in person
And yet here I am
Thanks youtube
EZ Darren Robson not seeing an anvil in person is so true lmao
yup lmao
EZ Darren Robson same
Not even in minecraft?
@@seongho37 😂
And now he can finally get his sharpness 5 he's been wanting to
Now he can enchant his bow with *silencer III*
He can now finally name his horse "Dinnerbone"
He can finally name his watersheep "Jeb_"
He can finally enchant to mending V
Oh no here they come!! Fellow minecrafters!! Rruuuunnnn before it's too late!
lets see what the youtube algorithm has pulled out today
not bad
Its your lucky day
@@BlackBearForge You, sir, just earned a subscribe. Love the accent and love smithing vids.
I agree
Nice profile pic and name, very good!
@@aleksanderlenartowicz5659 what accent?
Never had an interest in smithing.... EVER.
But for some reason. I have to watch the whole thing. I need to witness this man defeat the noisy anvil.
Proud Boyz ikr I literally watched the whole thing
Yep watched the whole thing, was not disappointed
19:30
Tutorial HQ ?
Top 10 anime boss battles
Not sure how I got here but now I want an anvil
same, how much do they cost though?
Around 500 for one that size
@@mdmdnndndn4824 huh, surprisingly not as much as I thought one would be.
Try a grand.
@@StormWidgeon that seems more reasonable lol
I grew up without a grandfather, but I would imagine the perfect grandpa would sound a little like you.
same but in spanish
same here :)
I thought I watching my dad. But he don't blacksmith.....that I know of
My jaw dropped to the floor when I heard the difference, it's time to update my anvil stand. Great video.
Mr4nt0ni0 dude!!!! My reaction EXACTLY!! My anvil sucks with the sound and I did this after i saw it and boom NOTHING....
@@hardknocktacticsllc2935 wait....yall actually got an anvil
@@uraverageskeleton6480 fr that's what I'm thinking
@@SAMMYTIME11 CREEPER
Sᴋᴇʟᴇᴛᴏʀ The boy awwwww man
The magnets work because as the anvil vibrates, the magnet has to accelerate towards the anvil since it isn't physically bonded, this lag is out of phase with the vibration so it has the effect of dampening it.
isn't it crazy how magnets work?
@@ototo4508 its magic
Thanks dad.
@@SilvaaFabio you make a joke like that then upvote your own post?
SCIENCE!
I know next to nothing about blacksmithing but this really cool to witness.
yeah I have no idea why this was recommended to me but I know someone who may appreciate this.
Same.
QuinnSucksAtVideogames I was literally just watching fortnite and I somehow got here?
@@CausingChaos. dead game
It’s amazing how this guy knows his main audience are smiths, and his outro is the best outro i’ve seen in a while
Obviously his main audience are smiths 😂
It's amazing how gamers know that their main audiences are gamers
I think I've found Jamie hyneman's dad
His Dad was a Walrus.
tbh
Why is this too accurate
Subscribed. Holy cow that was impressive to listen to the difference! 2:00 - 18:53
Thanks for the timestamp PAPA
You da best!!!
Lol kinda sounds the sane
Anthony Guzman you are deaf
Lol it sounds the same
I not even a blacksmith this was on my recommend. Very educational.
It was also on my recommend.
Mads Larsen Same here. Been watching wood turning and 3D printing videos.
Thanks youtube
Now I can finally kill the road-runner with my new stealth anvil
Meep meep
@@gregoryashton I'm operating under the assumption that it muffles the slide whistle as it's falling
Yes
Meep Meep Very good.
Meep meep?
Honestly you are the Bob Ross of blacksmithing! I realy enjoy wathcing you work!
Thank you for sharing your knowledge!
Next we'll be forging happy little clouds, or something like that
Happy little scroll
Maybe he should say something like "And remember my friends, Anvils are our friends" at then end of each video!
That is funny and true Hartsock Thompson
@@BlackBearForge
That's a good one
I love seeing people who make videos about there hobbies/jobs that are really cool like black smithing
Excellent way to lock down an anvil! What you did would be considered "tornado-proofing" your anvil here in Mississippi. Th' shop might be gone, but the anvil didn't budge.
Reminds me of one of the smiths north of here after flooding a few years ago. A friend was helping to clean up scooping mud out with a skid loader. The loader came to an abrupt stop, he had found the 400 pound anvil.
Haha!!
Black Bear Forge is
I don’t know why this was recommended... or why I watched the entire thing... but i found it really entertaining
I thought, "Yeah yeah… Chains and magnets…" But I clicked to watch anyway. I'm blown away by the results.
It came out better than I hoped, so I'm happy
@@BlackBearForge
Do you happen to be familiar with sand underground for anvil or a sheet (2-3 mm, guess that's about 1/10 inch thick) of lead between the block and the anvil to reduce clinging noise? Anyhow mounting it on silicone seems to work awesome too, and with the extra metal clamps it will probably hold.
for the past week this has been in my recommendations and i don’t regret watching this now lol
put the chains back on just for the aesthetics always looked cool. but still leave your clamps on they worked well
Awesome ! My anvil rings my hearing aids so much that I have to cut them off when using it - this system you developed should be the perfect answer to my problem . THANKS !!!
I know nothing about smacking metal into things but somehow, youtube told me I needed to watch this. And in no way am I complaining.
I remember my grandfather using a piece of strop leather under his anvil. It seemed real effective. Great video, thanks for sharing.
working with your hands is
one way to truly enjoy your life
I wish I could have taken shop class and had a teacher like you.
Thanks
hey mate
i wanted to say thank you so much i spent 3 weeks straight trying to change my mic and audio to stop the shattering anvil ring. it never ever occurred to me to fix (or that you even could) fix the anvil.
thank you so so so much
It is amazing how much louder an anvil sounds on camera than it seems to in person
Black Bear Forge that is very very true
@@greywolf0 you're a blacksmith and a gamer? Why arent you making more videos?!?
@@Anon_Omis some people describe my voice as frog like shrill and my face as a bad face to beard ratio. I do have the best windows media player trasitions money didnt buy tho. People love them dont they?
There is no way that I thought you could tone that anvil down to that extent. Very impressive results and solution.
RUclips, the place where I can learn to lock pick, blacksmith, cook, probably make lock picks, make it through prison, beat a game, learn about games, watch games, and do things with just my bare hands.
ABushInDisguise and cats, don't forget cats.
Yeah I like to make cats with my bear hands too.
@@exoware6479 lol
A fellow LPL watcher?
You will be the best bush there ever was
Hey Black bear. Use leather friend. It helps drastically and also looks good. Best place to wrap it would be around the neck of the anvil. Also, the ring helps with metal working anyhow. Take care and keep up the craft. Hopefully you can pass your craft off to a grand kid or child. These are crafts that need to always exist. I personally have been working with extracting iron from what most would just a call a rock. Cool stuff.
I think the ears appreciate that little trick quieting the Anvil. Looks lots cleaner than the chains. That will be on my to do list. Thanks John.
Whoa, that worked way better than I would have expected. Damn, the difference is amazing. The anvil is practically silent compared to the ring it had before!
I don’t have an anvil I don’t do blacksmithing but I still watched all 20 minutes of this video and finally happy with a RUclips suggestion video 👌🏽
Thank you Ron Swanson!
I miss blacksmithing... As a child i was often at my godfather. He is art smith and makes realy cool things out of metal.
Most of the time i made small items such as nails or small animals (a snail is realy easy, great for beginners). There was a history festival one time while i was visiting him and we where showing kids how small and easy things are made (again small animals, small metal smiley for the key and such things).
That was great because that was exactly what i used to make and i had a great time while making everyone exactly what they wanted :D
Good old times... I wish there where a bigger market for blacksmithing here in germany. I would love to work as one but you cant life from what you get paid because not many people want something handmade anymore.
I like this channel, i will stay a while and listen ;)
I watched a demonstration of a blacksmith making a nail. I really appreciated the ease that we can get a nail today.
Looks like you have a nicely appointed shop. A much simpler way to "deaden" an anvil is to attach a ring (2- 3") to a spring from a "bangety bang" screen door, and attach the other end of the spring, to the base of the anvil block. Then just slip the ring over the horn of the anvil. If you need to use the horn for a particular operation, then just slide off the ring. This kept my anvil quiet for more than 20 years.
You must have a lot of XP to use the anvil that much
Thanks man, 10/10
You must have worked sooooo hard on that joke i haven’t seen the exact same thing 3 times already at alll
Wanted to do this to mine for ages but I think this sealed the deal. Also posted on my birthday so it’s a sign
12:03 *when shit's starting to be serious*
😂
Growing up the grandfather's were still alive & well. I would be included in any trip to another tradesman's shop. I clearly remember grandda giving any anvil he walked by a firm but gentle slap to listen to the bell ring.
Although the opportunity is not very common; I walk in their shoes and will give an anvil a spank.
It surprises me how many people who own an anvil don't know about the bell inside of it. Thank you for allowing us to visit with you at your shop.
I don’t anything about blacksmithing or anvils, but for some reason I found this really interesting
Great video, I really like the anchoring system ... 100% improvement. I am going to use that system on my 200 pounder.
Thanks
"Make an improvement in your shop" -- what a great piece of advice, and something I actually did today. Thanks for another useful video.
Hi John! I just wanted to tell you how much this video helped me! I just started blacksmithing a short time ago and have a small piece of railroad track for an anvil. The first time I struck it, the sound was so loud, high pitched, and piercing that dogs 2 blocks away started barking. It was absolutely not going to work. But, a little silicone and strapped it down tight with some pipe strap and now it sings much more beautifully. Thanks for the video! It really helped.
I'm glad it helped out. Keep forging
Thanks, now I can put Mending to my stuff without waking up my neighbors.
I love the comments of people saying things about how they need to do this to their anvil! Almost as if it's something everyone has in their home
Anvils make good pets. They are very clean and never bark at the mailman.
This was in my recommended box because I watched a music video with the band Anvil, and I don't regret clicking on it. You're doing good work, algorithm.
I re-watch this video over few months just because the change in the ring is so drastic. 12/10 good job.
Wow!! Huge difference, John. I am so stealing this. Thanks!
As a longtime 'maker' and 'handy' type, but blacksmithing noob, I always learn so many additional little tricks from your videos, like for example those simple but cool custom-made clamps, and your general overall 'approach'... plus you're also a great teacher, thx!
Thank you
My Grandpas anvil was mounted on leather to a tree stump buried in his shop floor. He had home made U clamps at angles that crisscrossed and fit into notches in the stump. It had a dull thumpy ring to it but didn't hurt your ears even after hours of use. Good vid, try the leather
Enjoyed that. Just bought my first anvil at 54 off a retired craftsman. It came on a big solid oak block of wood. I noticed that was bolted down onto the wood with plasticine underneath it. Now I know why. The anvil is pretty quiet tbh. It obviously works.
Never thought I'd find such a relatively basic project to be so fascinating, but those 20 minutes went by *real* fast
I liked this video, not only on RUclips but also personally.
I don’t even have an anvil but I subbed...
He’s so calming to listen to
Thank you for this. I finally got around to doing some of this and it made a world of a difference my neighbors are probably just as grateful for you than I am now. ❤
I like your style!! I did nothing more than to make clamps to secure my hay budden to the block. It is solid and quiet.
Other anvils have a rubber mat or chain wrapped waist with forged nails to secure in place. The clamps perform best. They serve to hold secure and quiets the ring to a thwack!
Dudes legit as hell reminds me of ron Swanson
The actor of Ron Swanson reminds me of Ron Swanson
Nick offermen if I spelled it right. It’s the voice similarity
A clean, tidy and well executed solution that worked incredibly well!
Thanks for sharing! I have an anvil I an wanting to mount and watching your videos I have learned a lot!
WoW! John, That really did the trick. I built a stand for my new to me 300lb Henery Wright last week and set it on a piece of belting. It helped but your clamp system is next. Thanks
That was excellent. I was on the edge of my seat waiting to hear the "after" ring. So dead! Love it. Good idea well excecuted!
Awesome video as a mechanic I had a hard time watching you manually wrench without grabbing a cordless impact but slow and steady always wins
Nil, watching blacksmiths who just enjoy what they do really makes me want to join that career as an apprentice and help them out
I bet you just clamped it down because you were worried that someone might pick the anvil up and run away with it.
Yep, last week I walked away with two ( one in each arm). Really easy, will do again.
The sound of the anvil is a big part of what makes blacksmithing cool.
and a big part of why so many blacksmiths are deaf
1.15 minecraft update looking good 😤😤
Very wholesome i have never watched blacksmithing on this profile but yt still recommended, not disappointed
Asphalt roofing shingles work really well to quite and level the anvil.
going to have to wear my hearing aids when I watch you again.. Great job I quess mine next.
thumbs up for you john! another instructive video. I will do the same thing as soon as I can get a real anvil. I got a notebook to take note and wear my safety glasses! lol
hello from Belgium
Someone really does listen 😉
He made it look all so easy for us, so we can thank his years of experience of being a master smithy. Tip Top!
I really liked this video. You sir have gained a new subscriber
The difference is incredible!
Wow, what a great video! You explain things clearly and to the point. I must also say you are an excellent teacher.
What a difference your anvil quieting project made. I watched 2 other of your videos before this one (your most popular one)
Subscribed!
Thumbs up! 👍🏼
PS I've been looking for a quality anvil for a while now, the large Peter Wright anvils are my favorite and it seems are the most rare & expensive.
Man.. I love when people that know what they are doing, explain what they are doing in such amazing way.
My 308lb Soderfors rings loud I'm using a big tow chain and it helps a lot. That's the same way i put mine on the stump with a 2x8 ramp. I think I'm going to mount mine this way. Great idea.👍
I also have a Söderfors, 434lb made in 1907 from cast steel, it rings like a church bell :)
Know what, I appreciate the passion he has for this. That's all I ask of any channel, even if it does sound boring.
I've found that a sheet of lead (1/8" thick)underneath the anvil works well. Regards, Matthew
Loved the video. It's incredibly impressive how self reliant You are in putting together all of these accoutrements
to your workshop.
Awesome job man this was an amazing experience watching your video keep up the good work!
John here made a big difference. Good job well back to work lol. Enjoy
Good idea I keep a heavy rubber mat under my anvil and then strap it down living in the middle of Cumberland MD I need it as quite as possible
Thumbs up for the dramatic improvement. I have some magnets on my anvil to keep it from ringing. But sometimes those magnets do funny things to what I'm working on. Which is annoying.
"One method is just to wrap chains around them"
Exactly what I do when my gf gets noisy too.
It most certainly is a "small" task, but a huge improvement. Working with that anvil will be a lot more pleasant as well, not just for the video quality. Great job!
Before I watched the video: Okay, RUclips, I'll watch it.
After I watched the video: Huh, that anvil was pretty noisy. Neat.
Halfway through the video and I'm asking myself why am I here .... And I love it
When your welding magnets get completely wrecked with that iron dust, a lit oxy acetylene torch works well. Hammer the oxygen thumb valve wide open like you are about to start cutting. It blows and burns the fuzz right off the magnets without heating them up too badly at all. Old millwright trick.
Thanks
That was a great improvement
Great tips, thanks! However, a helping hand moving that anvil is sorely needed. Life's too short to risk injury, and it would've been much easier.
That animal is strong as an OX !! He has been lifting and moving heavy stuff since he was in pampers i bet ! LOL He dont need help with that little steel toy ....
@@warrenmichael918 ....That man never wore pampers.
pampers/ loin cloth, same thing !! LOL
@@warrenmichael918 fuck off warren
Spent many an hour listening to my dad’s anvil and my brother’s when they were shoeing horses and making things. I liked the ring then and I like it now.
You seem so nice and wholesome, I'm subscribing
Fantastic video! Love to see a good blacksmith problem solve. I have a thick h-beam as my anvil and using similar methods it was10/10 on noise to about 3/10. As you said, makes the process much more enjoyable for you and anyone watching. Well done!
Glad it helped
There are thin sheets of elastomer vibration damping material available. Some have adhesive on one side. These sheets are very thin, and don’t look like they will do much, but they do. They’re also cheap. The aluminum 2 x 4 foot version from McMasterCarr, is about $30. I haven’t tried it on an anvil, but putting it on the bottom surfaces of the horn and rear, could help a lot.
THIS is the kind of wholesome stuff we need on RUclips tbh.
Finally YT sent me to a type of channel I actually like, when I was 13 I experienced Blacksmithing for the first time and I've wanted my own forge and anvil ever since! Cool video especially how you figured out how to move the anvil by hand haha, I would've used an motor crane!
Very successful way to Reducing the.noise of anvil thank you.nice job
I built a sand filled metal base similar to the one in the book, Back Yard Blacksmith, by Lorelei Sims, for my smaller European Wrought iron laminated anvil, and I got to tell you, zero ring. Now I got to figure out how to eliminate the ring on my Pendinghaus, which is mounted on a wood base. I'm going to try a rubber mudflap and strap it like you did. I got strong magnets on it which helps, but they keep grabbing the metal from me. If that don't do it, I'll have to weld up another base.
I have never used a base like that. Does the anvil ever tip as you work in one area more than another?
I met Lorelei Sims a couple weeks ago and she showed me her anvil stand like that, it's ingenious. She had a friend with a nice HB anvil for sale that I ended up buying. You couldn't ask for a nicer, more helpful person to deal with, I even got a copy of her book too. Great experience for sure.
The anvil did tip somewhat during use, so the latest modification was to add 2 ea. 3/4 threaded rods welded to the bottom of the base, and thru the top plate the anvil rests on to apply compression to the sand filled column. Soon as the initial settling stops we shall see if the bolts will eliminate the tilting.
One thing I like with this type of base is it is height adjustable.
I really enjoy Lorilei's book, I think she did a great job and the photos are excellent. I have also copied her post vice stand on page 37 mounted to a large plate attached to the floor, and I am in the early stages of designing another one similar to the first, but with a 36" round base that you stand on while using, that employs the principle of opposing forces canceling each other, so no movement of vice stand no matter how hard you wrench on vice handle, while at the same time providing the benefit of merely tilting the entire vice stand and rolling across the shop floor to a new location when desired.
Roderick storey d
hank Quinones love seeing this blacksmith shop and the other thing in it.