Need a first aid or trauma kit? medicalgearoutfitters.com/?aff=117&gad_source=1&gclid=Cj0KCQjwltKxBhDMARIsAG8KnqWeDu2Ew0ee2cXsFpjl6SJm-Fl-kLnUHWlnRomWfQdAImRJYpSBNDQaAqRCEALw_wcB
I would have thought at 100 yds the bullet would drop enough that you wouldn't have to make that much correction. But I guess since it was hitting that high at 30 yrds it would only get worse up to the point it starts to drop. It might be dead on at 150 yds.
A few weeks ago Sportsman’s had one for $949.00 and I went early to get it . Upon examining it at the sales counter it had terrible cylinder end play . So bad that you had to hold the cylinder to the rear to close it . If you didn’t the cylinder would hit the barrel shank . I left it there .
Since you asked, my 6” model arrived 2.5” right, and 1.5” low. Using the adjustable sights I was able to match the POI with the POA and put it dead center. So, mine has been great.
I believe this revolver takes the same sights as the Python/Anaconda. EWK Arms makes replacement front fiber optic sights for it that are +.025" that should do the trick. Only requires loosening the allen screw at the muzzle to replace. The rear sight is garbage, though...as is the OEM rear on the new Python & Anaconda. These deserve the Wilson Combat Python/Anaconda rear sight. Not cheap but a major upgrade in quality! You shouldn't have to do any of this to a $1,000 revolver, but that's the world we live in.
Exactly! I have a Glock conversion slide that has special mags and they only hold 10 rounds. Love the idea of a 10 round revolver that easily extracts and I can load in about the same time. Gorgeous gun too. Approx $900+ is a steep price though. Might put this on my list to Santa
@@trainedtiger Hahaha! I'm in Texas, so its more about the adapter mags just holding 10 rounds. But this would be a good revolver for California, max rounds
I am definitely a Colt-Snake gun guy; however, I do have a finely-tuned 4" S&W 617 that I absolutely love. If I could find a 6" King Cobra, I would definitely jump on it. Something about the 6" barrel, its longer sight radius and the way it looks . . .
You might find a taller front sight. I recently purchased the Walther P99 and had the same problem. But Walther did include 4 other front sights, so you can make that correction. I almost bought the Colt, but the Final Edition P99 won. It does need better grips. Their little bumps won't allow for much traction.
Hi sir I would have to say that I would be calling the support line for that company and they would be hearing a whole lot of explicit words then my wife would take phone an be much nicer an may be just may be get new one or mine fixed
I bought the 10-shot Ruger GP100 which was my choice due to three points of cylinder support versus only two in the S&W model 617 and the Colt King Cobra 22 LR model. The barrel profile is a 5.5 inch semi-lug on the GP100 Ruger 22 LR revolver and full lug profile on the S&W and Colt models. Ruger has recessed chambers as does the S&W 617 but the Colt is not a recessed chamber cylinder. So the Ruger GP100 was my choice.
Really beautiful pistol. My grandfather had a 357 King Cobra and I've always wanted to own one, eventually, I will pick one up, I'm thankful Colt started producing the snake revolvers again.
I have the 4" and the 6" colt 22's and they shoot exactly like you describe. Not point of aim for me either. It took some getting used to. I love them but I totally agree with you on sighting situation.
I have the new Python 2 1/2" and Anaconda 4" so a 4" king Cobra is next on my bucket list! I love all these new Colt snake guns! All of mine are concealed carry defense guns.
God I hate ai comments. I set this god awful channel to “don’t recommend.” Shows up in my feed and is now haunting the comment section of gun channels. Awesome.
I like mine so much I bought a 2'nd one. The most accurate load I found is believe it or not the Federal Punch 22 LR. It shoots to the POA at 25/30 yards. Try is and see what you think. Now I'm waiting for their upcoming 3" version later this year.
Does the new Wilson Combat rear sight for the Python fit the .22 King Cobra? Everyone was disappointed in the rear sight Colt put on the new model Python, as well. If it fits, that could be your answer....
@@donaldbutts My Gunsmith had to do a little filing to install the Wilson rear sight..he found that the hole for the pin to secure the rear sight was a hair tooo far forward...as far as its accuracy is NOT a target grade weapon..the S&W M17 will beat it badly in ANY accuracy test.
Had the same issue with the sights. The Anaconda, Python and King Cobra front sights are interchangeable. Swapped out the King cobra with the Python and that resolved the hitting high issue. Unfortunately I have an issue with the red ramp and my eyes picking it up well. Will be picking up a gold bead to replace it.
I swapped out the front sight for a Patridge style blade and replaced the rear sight with an Elliason adjustable sight on my KC. Unfortunately, I can't do too much about the off-the-scale, 5-lb. plus single-action trigger pull.
Well, I just bought one today and hopefully it turns out to be as good as you claim and maybe I don’t have the issues with the site that you were experiencing hopefully
I had suggested to Colt that since they now have the 22 lr cylinder they should come out with a 2, and 3 inch barrel Cobra in 22 lr. If not they should at least offer a 3 inch 22lrKing Cobra target
With no budget what would be your favorite .22 competition pistol? Would you say something like a Walther GSP500? Or still a Volquartsen such as the Black Mamba? I currently use the Ruger Mark IV Competion model with almost every Volquartsen upgrade I could put on it. Volquartsen triggers are amazing.
I already have a 617, but I did pick up a Colt 22 in 4.25" today. I have not shot it yet, but so far, it seems impressive. It definitely has much better finish, and doesn't have the Hillary hole. I picked mine up for $999. The Smith is 949 most places, so I guess each his own between the two.
Hey buddy! Beau here from TX. Met you @ the NRA Convention. May have to change the front sight to different height. I had a HK USP with the same issue. It was the front sight that was the problem.
Not sure why but I am getting light primer strikes at least 1 per 10 sometimes 2 per 10. Using CCI mini-mag and CCI standard velocity. I hate to have to send it back because it is only 4 months old. 🤬
Hey Plinkster, i watch yor trick shot vidz & show'em to my buddyz. Watch all ah your vidz. Kirsten Joy Weiss, she's got some good trick shots vidz too. Shoot- Mannn I'd watch yall kick empty shell casings. Keep makin trick shot vidz.
I honestly prefer the old model 17. 6 rounds only, yes. But much better balance, and trigger. The 617 is far too frontheavy to me. The 17 just points perfectly.
Had to change the rear sight on my Python which uses the same as the King Cobra. Though I did not have a reason to change it on the King Cobra interesting yours shoots so high.
I just got one of these with a 6” barrel.. I’m wandering if the sight index is different as far as having to hold low. I ran into this problem with the Glock 44. I haven’t fired this colt yet but I’ll be looking closely at it now that I watched this video.
Uhhh......why did you go down with rear sight...as in, sounded like you were trying to "lower" the rear sight...if you Raise the rear sight, it will Raise your shot....if you lLower your rear sight, it will Lower your shot....when i was a kid the "up\down, left ight" thing always confused me
It could be your ammo and perhaps its a Six o'clock hold? Hickok45 was reviewing a Springfield 1911 and had difficulty hitting much. After a couple of magazines he tried the 6 o'clock hold and then started hitting everything he aimed at. The manual on the Springfield 1911s clearly state a 6 o'clock hold and most people complain about the inaccuracy but then feel a little foolish because the didn't read the owners manual that clearly states 6 o'clock hold.
I just picked up a 6” gun. The set screw for the windage was loose so I tightened before shooting. It shot high and left at 10 yards. About 3 inches in both directions. I ordered the Wilson Combat rear sight as soon as I got home. The Colt rear sight is garbage.
If it’s shooting above point of aim and you have to aim low to get hits you should need to raise the rear sight up. If you have it bottomed out all the way down, that might be your problem. I don’t have one of these, but I listened to what you said 3 times and unless you misspoke or I misunderstood, that would seem to be the case.
I have a S&W 617 with a 4 inch barrel and i really enjoy it. I also have a S&W 63 with a 3 inch barrel and 8 shot. I have the same problem you have, it shoots high. wry frustrating. It has a great action, but if are always guessing for POA, crazy. I'd be interested if there is a solution or what the root of the problem is. Great Video.
i just picked up the 6 inch one at sheels in kansas city, 999.99. love the way it looks, but have not had a chance to shoot it yet. they had a couple of them, first ones i have seen for sell around my area.
I Haven’t shot mine yet, so I can’t comment on the sight issue, but my issue so far is the grips. So frigging small. I have large hands (large or xl gloves) and I can’t get three fingers on the grip. My pinky hangs under the bottom of the rubber Hogues. Really Colt? Recoil dampening, concealed carry grips on a target .22?
Hey plinkster would think you like to see the colt cylinder with recessed shells instead of the rounds sitting open on the outside of the cylinder like they are now? Personally, I like them to be recessed. Thought I’d ask a pro.
A quick tip for you man if you see this comment I don’t think you will you should wear the ear plugs and the headset together when your shooing that way when your old you hearing is not lost
Having a POA lower than POI is exactly what you want for good shooting. Prevent you from looking at the target. I would suggest a POI 3" high at 25yards.
Why? On a 22 revolver/pistol 1000 feet per second 40 grain bullet zeroed at 50 yards POA and POI the same, shots will be .2” high at ten yards, .8” high at 25 yards and dead nuts at 50 yards and around 4.5” low at 100 yards.
Could you do a video on 22 primer powder.... I let my wife carry a 22 snub nose for a couple months and went to fire it and half the rounds didn't shoot. I then gave her another 22 lr. Pistol with same results. Did some back ground investigating and found when carrying 22lr daily the powder must shift away from the hammer strike. Any thoughts from you would be a help my friend 🤔
Interested in seeing wat you do about those sights I can't imagine you leaving it that way I have a few of the 2020 pythons and I agree the sights on such a iconic gun are crap Wilson combat makes a replacement sight but I have pulled the plug yet it just sucks I have a $1400 gun and I have to spend another $100 and something to fix the sights.
When my long-range range is ready. Should be the end of May. I love making trick shot videos, but no one hardly watches them anymore. My average trick shot videos only get 20% of views compared to what my normal videos get.
@@22plinkster that’s, odd…. To me anyway. Thanks for the update! I look forward to the LR content. A buddy of mine and myself have gotten into .22LR long range recently. It’s a lot of fun! And good practice.
I just was fortunate to join a gun range in my area and I was wondering if someone could steer me in the direction of a light weight 22 rifle for me. They have a 22 range just for 22's, I'm getting excited 😊
I have the S&W 617, really wanted to get a Colt as well but the reviews I've watched are not as good as I would like considering the premium price tag. Beautiful gun otherwise.
Bought one 1 week ago and it won’t lock the cylinder closed. Had to send it back first day. Never got to fire it! Sent it back. No excuse for a $1000 gun
Need a first aid or trauma kit?
medicalgearoutfitters.com/?aff=117&gad_source=1&gclid=Cj0KCQjwltKxBhDMARIsAG8KnqWeDu2Ew0ee2cXsFpjl6SJm-Fl-kLnUHWlnRomWfQdAImRJYpSBNDQaAqRCEALw_wcB
Heck yea!
I would have thought at 100 yds the bullet would drop enough that you wouldn't have to make that much correction. But I guess since it was hitting that high at 30 yrds it would only get worse up to the point it starts to drop. It might be dead on at 150 yds.
I love when you make those metal targets sing ... truly music to one's ears.
A few weeks ago Sportsman’s had one for $949.00 and I went early to get it . Upon examining it at the sales counter it had terrible cylinder end play . So bad that you had to hold the cylinder to the rear to close it . If you didn’t the cylinder would hit the barrel shank . I left it there .
Since you asked, my 6” model arrived 2.5” right, and 1.5” low. Using the adjustable sights I was able to match the POI with the POA and put it dead center. So, mine has been great.
I believe this revolver takes the same sights as the Python/Anaconda. EWK Arms makes replacement front fiber optic sights for it that are +.025" that should do the trick. Only requires loosening the allen screw at the muzzle to replace. The rear sight is garbage, though...as is the OEM rear on the new Python & Anaconda. These deserve the Wilson Combat Python/Anaconda rear sight. Not cheap but a major upgrade in quality! You shouldn't have to do any of this to a $1,000 revolver, but that's the world we live in.
I like that it’s a 10 shot cylinder
Exactly! I have a Glock conversion slide that has special mags and they only hold 10 rounds. Love the idea of a 10 round revolver that easily extracts and I can load in about the same time. Gorgeous gun too. Approx $900+ is a steep price though. Might put this on my list to Santa
California has entered the chat.
@@trainedtiger Hahaha! I'm in Texas, so its more about the adapter mags just holding 10 rounds. But this would be a good revolver for California, max rounds
Also means we can get it in Australia 🇦🇺
100 bucks a hole and can't shoot straight.
I am definitely a Colt-Snake gun guy; however, I do have a finely-tuned 4" S&W 617 that I absolutely love. If I could find a 6" King Cobra, I would definitely jump on it. Something about the 6" barrel, its longer sight radius and the way it looks . . .
Had mine for about 6 months now. LOVE IT!
You might find a taller front sight. I recently purchased the Walther P99 and had the same problem. But Walther did include 4 other front sights, so you can make that correction. I almost bought the Colt, but the Final Edition P99 won. It does need better grips. Their little bumps won't allow for much traction.
My 6” barrel length came a little high and left from the factory but it adjusted and locked down just fine.
They charge a $1,000 and the sights are 6” off. I would send it back. It’s beautiful but that’s unacceptable.
Hi sir I would have to say that I would be calling the support line for that company and they would be hearing a whole lot of explicit words then my wife would take phone an be much nicer an may be just may be get new one or mine fixed
*_IMPORTANT INFORMATION :_*
Products by The Skinny Medic are absolutely not endorsed or affiliated with The Fat Electrician.
I bought a S&W 617 in 2019. Possibly my favorite revolver. No one likes the key lock but a 10 run 22 is a lot of fun.
If Plinkster can't shoot it, I'm not buying it.
I bought the 10-shot Ruger GP100 which was my choice due to three points of cylinder support versus only two in the S&W model 617 and the Colt King Cobra 22 LR model. The barrel profile is a 5.5 inch semi-lug on the GP100 Ruger 22 LR revolver and full lug profile on the S&W and Colt models. Ruger has recessed chambers as does the S&W 617 but the Colt is not a recessed chamber cylinder. So the Ruger GP100 was my choice.
Yeah, we all know a medium frame rated for .357 mag needs 3 point lockup for .22 rimfire
Great looking gun.
Really beautiful pistol. My grandfather had a 357 King Cobra and I've always wanted to own one, eventually, I will pick one up, I'm thankful Colt started producing the snake revolvers again.
I have the 4" and the 6" colt 22's and they shoot exactly like you describe. Not point of aim for me either. It took some getting used to. I love them but I totally agree with you on sighting situation.
I have the new Python 2 1/2" and Anaconda 4" so a 4" king Cobra is next on my bucket list! I love all these new Colt snake guns! All of mine are concealed carry defense guns.
The 22LR caliber offers a perfect balance of power and precision, making it an ideal choice for both recreational shooting and training purposes.
God I hate ai comments. I set this god awful channel to “don’t recommend.” Shows up in my feed and is now haunting the comment section of gun channels. Awesome.
I like mine so much I bought a 2'nd one. The most accurate load I found is believe it or not the Federal Punch 22 LR. It shoots to the POA at 25/30 yards. Try is and see what you think. Now I'm waiting for their upcoming 3" version later this year.
Beautiful little pistol. Thank you for sowing it.
Does the new Wilson Combat rear sight for the Python fit the .22 King Cobra? Everyone was disappointed in the rear sight Colt put on the new model Python, as well. If it fits, that could be your answer....
Yes, either Wilson or Elliason will work.
@@donaldbutts My Gunsmith had to do a little filing to install the Wilson rear sight..he found that the hole for the pin to secure the rear sight was a hair tooo far forward...as far as its accuracy is NOT a target grade weapon..the S&W M17 will beat it badly in ANY accuracy test.
That's a beautiful looking gun
That site would be a deal breaker for me.
Price tag is hefty too for a 22LR revolver. Jmho
I have a 6” and 7 1/2” New Frontier .22 from the 1970’s and they both shoot 8” high.
Had the same issue with the sights. The Anaconda, Python and King Cobra front sights are interchangeable. Swapped out the King cobra with the Python and that resolved the hitting high issue. Unfortunately I have an issue with the red ramp and my eyes picking it up well. Will be picking up a gold bead to replace it.
I swapped out the front sight for a Patridge style blade and replaced the rear sight with an Elliason adjustable sight on my KC. Unfortunately, I can't do too much about the off-the-scale, 5-lb. plus single-action trigger pull.
Shoulda been a Diamondback!
Love the look of this Colt. That polished stainless is sexy!
Blued Steel is better.
@@joshuagibson2520 The original Colt Royal Blue is amazing but on this particular model I'm likeing the polished stainless
$1300 here on the west coast of Florida!
Well, I just bought one today and hopefully it turns out to be as good as you claim and maybe I don’t have the issues with the site that you were experiencing hopefully
I had suggested to Colt that since they now have the 22 lr cylinder they should come out with a 2, and 3 inch barrel Cobra in 22 lr. If not they should at least offer a 3 inch 22lrKing Cobra target
With no budget what would be your favorite .22 competition pistol? Would you say something like a Walther GSP500? Or still a Volquartsen such as the Black Mamba?
I currently use the Ruger Mark IV Competion model with almost every Volquartsen upgrade I could put on it. Volquartsen triggers are amazing.
you should do a review on the magnum research switchbolt 22lr
Can we see a comparo with the Cobra vs. Smith 617
Hickock 45 already did that if you're interested.
@@philschaefer4651 sweet!! Thanks.
They are both awesome but my preference is the Smith…
I already have a 617, but I did pick up a Colt 22 in 4.25" today. I have not shot it yet, but so far, it seems impressive. It definitely has much better finish, and doesn't have the Hillary hole. I picked mine up for $999. The Smith is 949 most places, so I guess each his own between the two.
How does it compare to the Ruger GP100 22lr? Looks like this would be very comparable.
Hey buddy! Beau here from TX. Met you @ the NRA Convention. May have to change the front sight to different height. I had a HK USP with the same issue. It was the front sight that was the problem.
You can put a ramp front sight from a Python 2020 model to get a classic sight picture. I did it with mine and it works perfectly.
Not sure why but I am getting light primer strikes at least 1 per 10 sometimes 2 per 10. Using CCI mini-mag and CCI standard velocity. I hate to have to send it back because it is only 4 months old. 🤬
Have had mine for months no issues whatsoever.
a great video and the wheel gun.have a good one Mr.
How about the front sight........can one get a taller front sight, and possibly just a plain black target style ??
Mine’s in WA background check purgatory :(
Don't you just hate the democrats of Washington for what they did to us? !!!
Hey Plinkster, i watch yor trick shot vidz & show'em to my buddyz. Watch all ah your vidz. Kirsten Joy Weiss, she's got some good trick shots vidz too. Shoot- Mannn I'd watch yall kick empty shell casings. Keep makin trick shot vidz.
Good to see you, bud. Trying to decide to bid on one or…thanks for the vid.
S&W 617s are hard to beat.
The recessed cylinder 😎
I honestly prefer the old model 17. 6 rounds only, yes. But much better balance, and trigger. The 617 is far too frontheavy to me. The 17 just points perfectly.
@@WH250398what size barrel? 4" feels fine on mine
Do you like it better than the 617?
Be sure and bring that with you to the Metal Madness Homecoming this June. We can play with the wheel guns!!
Had to change the rear sight on my Python which uses the same as the King Cobra. Though I did not have a reason to change it on the King Cobra interesting yours shoots so high.
I just got one of these with a 6” barrel..
I’m wandering if the sight index is different as far as having to hold low. I ran into this problem with the Glock 44. I haven’t fired this colt yet but I’ll be looking closely at it now that I watched this video.
My 6" version came dead on out to 60 yards (the end of the pistol range where I shoot).
Uhhh......why did you go down with rear sight...as in, sounded like you were trying to "lower" the rear sight...if you Raise the rear sight, it will Raise your shot....if you lLower your rear sight, it will Lower your shot....when i was a kid the "up\down, left
ight" thing always confused me
It could be your ammo and perhaps its a Six o'clock hold?
Hickok45 was reviewing a Springfield 1911 and had difficulty hitting much. After a couple of magazines he tried the 6 o'clock hold and then started hitting everything he aimed at.
The manual on the Springfield 1911s clearly state a 6 o'clock hold and most people complain about the inaccuracy but then feel a little foolish because the didn't read the owners manual that clearly states 6 o'clock hold.
i want one but i am holding out in hopes of them releasing them in blued versions.
I just picked up a 6” gun. The set screw for the windage was loose so I tightened before shooting. It shot high and left at 10 yards. About 3 inches in both directions. I ordered the Wilson Combat rear sight as soon as I got home. The Colt rear sight is garbage.
The S&W 617 speedloaders work in the Colt, fyi.
Love it! Debating with my 15 years old 617 to see he needs a brother from another mother. 😂😂😂
If it’s shooting above point of aim and you have to aim low to get hits you should need to raise the rear sight up. If you have it bottomed out all the way down, that might be your problem. I don’t have one of these, but I listened to what you said 3 times and unless you misspoke or I misunderstood, that would seem to be the case.
Plinkster is right, if it's shooting high, you move your sites to match where it's hitting, either lower the rear or raise the front.
Did you ever get the rear sight issue fixed???
Surprised Colt would do that with the sights.
Those Pythons were the gun to have back in the day...what am I saying, They are the gun to have today. I love mine
On my colt the cases bulging some more so on different chambers. Was told by colt it within specs for the gun
I have a S&W 617 with a 4 inch barrel and i really enjoy it. I also have a S&W 63 with a 3 inch barrel and 8 shot. I have the same problem you have, it shoots high. wry frustrating. It has a great action, but if are always guessing for POA, crazy. I'd be interested if there is a solution or what the root of the problem is. Great Video.
Over 1K and the sights suck? Wow, I think I'll pass
i just picked up the 6 inch one at sheels in kansas city, 999.99. love the way it looks, but have not had a chance to shoot it yet. they had a couple of them, first ones i have seen for sell around my area.
Picking mine up next Monday!
Can’t wait. I wonder if Wilson Combat has or will have replacement sights?
Mine is perfect point of aim. 6”
I have a pre 17 Smith and wesson uses a 6 O'clock hold on bullseye matches , which would you consider more accurate?
I Haven’t shot mine yet, so I can’t comment on the sight issue, but my issue so far is the grips. So frigging small. I have large hands (large or xl gloves) and I can’t get three fingers on the grip. My pinky hangs under the bottom of the rubber Hogues. Really Colt? Recoil dampening, concealed carry grips on a target .22?
Hey plinkster would think you like to see the colt cylinder with recessed shells instead of the rounds sitting open on the outside of the cylinder like they are now? Personally, I like them to be recessed. Thought I’d ask a pro.
Would Wilson Combat sights 1053FG180 FRONT SIGHT, COLT PYTHON/ANACONDA, SNAG FREE, GOLD BEAD, .180 work?
A quick tip for you man if you see this comment I don’t think you will you should wear the ear plugs and the headset together when your shooing that way when your old you hearing is not lost
very nice... I think I'd buy 4 different 22s for the same price but yeah!
Hey Plinkster, doesn't Wilson Combat make replacement sites for Colt revolvers? Check it out.....
Try High Velocity 36gr Hollow point ammo, may lower your point of impact...
Colt needs to send you a taller front sight.
Hi viz front sights pattern high to my eye.
Having a POA lower than POI is exactly what you want for good shooting. Prevent you from looking at the target. I would suggest a POI 3" high at 25yards.
Why? On a 22 revolver/pistol 1000 feet per second 40 grain bullet zeroed at 50 yards POA and POI the same, shots will be .2” high at ten yards, .8” high at 25 yards and dead nuts at 50 yards and around 4.5” low at 100 yards.
@@steveniemyer9288 Go back and read my comment until you understand.
Could you do a video on 22 primer powder.... I let my wife carry a 22 snub nose for a couple months and went to fire it and half the rounds didn't shoot. I then gave her another 22 lr. Pistol with same results. Did some back ground investigating and found when carrying 22lr daily the powder must shift away from the hammer strike. Any thoughts from you would be a help my friend 🤔
Plinkster do you know if Colt is going to offer the Snake revolvers in 8 inch?
Interested in seeing wat you do about those sights I can't imagine you leaving it that way I have a few of the 2020 pythons and I agree the sights on such a iconic gun are crap Wilson combat makes a replacement sight but I have pulled the plug yet it just sucks I have a $1400 gun and I have to spend another $100 and something to fix the sights.
Is it not possible to change the Front sight to a higher one?
How's the recoil on it? I'd assume not much, considering the mass of the gun and it firing .22s lol
I seen one at my local store. I was looking at this, the Taurus TX22 compact and the Walther P22.
Which one did I buy? Lol
When are we going to see more long range content? And or trick shots?
When my long-range range is ready. Should be the end of May. I love making trick shot videos, but no one hardly watches them anymore. My average trick shot videos only get 20% of views compared to what my normal videos get.
@@22plinkster that’s, odd…. To me anyway. Thanks for the update! I look forward to the LR content. A buddy of mine and myself have gotten into .22LR long range recently. It’s a lot of fun! And good practice.
I just was fortunate to join a gun range in my area and I was wondering if someone could steer me in the direction of a light weight 22 rifle for me. They have a 22 range just for 22's, I'm getting excited 😊
4th shot on the 4in plate at 100 you hit it. Very faint. But that 22 dont ring hard at that far
Change the front sight to a red ramp
I really want a snake gun and I'm starting to think this is the one I'll get. those 3 inch Pythons are epic looking though.
It's a great way to train and have fun without breaking the bank on ammo.
Instead you “break the bank” on firearms.
I put the Wilson Combat rear sight on both my Python and Anaconda. The stock Colt rear sight sucks.
I have the S&W 617, really wanted to get a Colt as well but the reviews I've watched are not as good as I would like considering the premium price tag. Beautiful gun otherwise.
For that price you would think it would shoot to point of aim.
Showing it! LOL...darn autocorrect.
It's cool but still think the H&R Sportsman's Model 999 is cooler
Bought one 1 week ago and it won’t lock the cylinder closed. Had to send it back first day. Never got to fire it! Sent it back. No excuse for a $1000 gun
How long was the turn around on your Colt back to S&W ?
Mine also. Never got to fire my brand new gun! Sent it June 6. Not done yet😩called yesterday. Said it’s next in line😁last colt I’ll buy.
Does NOT look like a King Cobra.....
Am I stupid?
👍
If I'm going to spend $1000 on a pistol, it's not going to be a .22.