I’m happy you still have all your fingers. My god man, I almost could not finish this video. The stress of watching you misuse that table saw is stressing me out!
A table vice and router would've done the job equally... But maybe he's used to using that saw like that. It's kinda like contractors that ALWAYS remove the guard from the hand held GRINDER because it always gets in the way...lol
Beautiful Job ! To all the trolls 👿 I’m sure we would all do the electrical differently but he’s inspiring everyone to do a DIY project he wasn’t looking to get harassed about his ethnicity or skill set. This video has 1 million views 🎉 congrats 🎈🍾
I suggest 12vdc LED, cutting wires to two lenght, use shrink tubing and weld the wires. At 12VDC and LED it will be safer and it will last years. The project by itself is impressive, good job
Nice..just a tip....for extra safety cut one wire shorter where they connect so the negative and positive break/ connection isn't beside each other..cheers!!!
that is always a good idea. also, making the exposed wire sections smaller and using a heat shrink will make it safer and stronger. you can check my way of splicing wire in my video ruclips.net/video/OoC-g3wZ4Mc/видео.html
The end product is beautiful being married to an electrician and helping him from time to time I was side eyeing some of the electrical work. We have some outdoor lighting its called Sylvania Smart+Zigbee Outdoor Full Color Accent Light it would be better its already wired and you can remove the garden stakes and mount each individual bulb to the end of each piece of wood I believe would give you the same effect plus you would be able to have a huge color selection and color dynamic scenes. Also I'm no carpenter or anything but I'm pretty sure the dumbell proped up against the wood while sawing is most likely a safety hazard but I get it I've seen the hubby do some shit that makes me question how he's still living but hey he is an electrician so yeah but I hope the electrical last the idea and finished product is beautiful.
Yes putting anything against lumber while ripping like that is a good way to find out about kickback. Those saws are extremely powerful and can bury lumber in dry wall.
A table saw is the most dangerous power tool in a wood shop. What they need is a feather board to properly hold the wood to the fence. Enough has been said by others about the wiring 😲
@@cmitch3087 I would not and would want to see that very conflicting lol I have a hard enough time using a router or really any power tool they are too heavy and go too fast for my liking. My husband makes fun of me because I use just a regular old school screw driver instead of a drill.
@@rogermccaslin5963 I don't know what a feather board is but I will be googling as soon as I'm done writing this. I actually enjoy woodworking I've done a few things here and there and I've found it to be very satisfying when having the proper tools.
I found this comment useful, but the lights I looked up that you mentioned aren't available on Amazon anymore and I found them for sale on a few websites only to be (and this is posted 2 years after you posted your comment) $100+ dollars for outdoor lighting? Does that sound right? Are there other options? I've been looking for a colored option for this design because I want to do it on a small wall in my living room and I'm having trouble finding anything worth a damn. Thanks! Hope you see this after 2 years. 😆
Good for you. I know that some might think that you were somewhat unprofessional, but hey, this is all about do it yourself. But being careful with our tools is something that everyone should make a priority. Still you appear to have escaped any serious damage and the project came out nicely. Well done.
First of all, this is an excellent idea to accent a wall. So props to both of you! I love it! My only suggestion is to google some different ways to wire up the backside for a cleaner look, as well as to insulate the wiring. The other suggestion I have is before starting the project is to bring the outlet on the other side of the wall and hide among the black pieces. The overall visual is amazing.
Yes, the wall looked great when done. Very interesting concept. The electrical work aside, this may be something I may want to try. Perhaps even using different materials. But the wood is an interesting choice, however. Curious! That was low voltage that was used. Correct?
You should always have the larger part of the material against the fence on the table saw. Having that little sliver against the fence can cause a bind/kick back.
I think the idea and finished product are fantastic, but even as an old woman who still does her own DIYs, I would use led light strips and a remote control to get the same affect. ' Much safer and less work, too! However, I thank you for the layout as I want to do something very similar! It's beautiful!
Hi hi can I check with you on the dimensions of each strip please. I want to know if I can use a 30mm bulb to fit in. 😊 This looks amazingly beautiful ❤❤ I want to do one for my house too now
Hey amazing video love the concept. Just as a electrician a little recommendation, use heat shrink over the cable extension for a safer joint. Not being negative just something for a another project. ❤️🙌🏽
@@gedionsamuel2256 @SJ Magic is correct, these are likely a low voltage system, I'd imagine not more than 12v. Thus heat shrink would make a lot of sense to clean up the wires, I'd personally also recommend soldering the wires at the joint too before adding heat shrink, but probably not all that necessary.
For sure, I would recommend using solder & seal connectors. They make wire connections easy without the need for soldering equipment. Also I would hot glue the wires into place to ensure they stay in place. Great job on the wall it turned out looking very nice.
Beautiful job in the fabrication, lighting and installation. As others have noted, the electrical wiring, while functional, is unable to pass an inspection due to the use of Class 2 cabling for a Class 1 circuit. When you sell the home, this will likely be noted by a home inspector and be flagged. But, really nice work and I think the outcome is fantastic from a design and lighting standpoint.
Looks great! I wish you would have provided commentary so we could do this. I know nothing about electrical and a novice to wood working but getting better. I would love to be able to do this.
Good job, looks nice -and- looks fun to build. One suggestion, as an electrician I would always off-set my splices. A) It takes less bulk space B) it avoids any possibility of the wires touching. Not necessary here, but a better practice. Great work.
check the trim work for nails because they are usually nailed into studs I Use a strong magnet and that will also find studs for you as it is attracted to the nails. Stud finder’s work but I don’t think they’re necessary
Esta precioso lo que hicieron..... tengo una pregunta respecto a que aparato usaron para pintar que no vi manguera que se conecte a compresor de aire. Saludo desde Guatemala y gracias por enseñar lo que hacen esta lindo.
Oh Gosh, The woodwork and electrical leave a lot to be expanded on and corrected. The artistic design however is awesome and the artistic view is what I have taken away and admire! The use of pvc tape as an insulator on a joined wire is sub-optimal. I would recommend soldering and then hear shrink, and where it is on a 'T' join, Expoxy 2 part glue, or even hot glue would work really well, and wouldnt mean tape on the face meeting the wall. When applying wood glue between timbers, apply the glue as you have, but then spread the glue with a brush in an even and thin layer, It will result in a much higher joining force and wont risk the timbers spreading once the glue hardens. When attaching the supporting slats to the wall, avoid drilling through, already piloted timber, by doing this, you risk boring out the pre-drilled hole which will allow the timber to move when drilling the fixing. Remember 2mm off at the bottom can be 20mm off at the top. When installing, it would have been proper to begin at the corner wall and work out. This would allow for any mis-measurements and would mean a much easier fix on installation of the final section. DON"T GETR ME WRONG! I LOVE this install!! I just hope to share a little of what could be improved with other DIY''ers. Much Much Love and Appreciation!
I’m not much for know it all tradesman, but I’m not sure there was one thing, electrically speaking, that was code here. The fact they had enough knowledge to wire everything properly and in parallel, yet completely disregard all things safety is mind boggling.
i like it but the tape is no good txt time use shrink tube safer plus the wire going to the other room on the side no good look but . my question after u painted all black did u varnish the other wood and did u do the same for the black wood? but look beautiful..
I applaud what you've done - it looks fantastic. And I love the fact you've done it with basic tools and a very definite "DIY" approach. Top marks. But too often in the video I found myself taking a sharp intake of breath! Enough has been said about the wiring - please - if it's not 12v get it changed ASAP. Don't use tape. It stops being sticky. Just mix a bit of epoxy or even silicon bathroom sealant to hold the cables in the grooves. Try clamping things before screwing and use some kind of straight edge to line everything up. Screwing with such a big electric drill without a torque setting - very brave. Finally - please wear proper shoes - power tools, large pieces of wood and flip flops are not a good combination! safety always comes first But, as a say, stunning idea that looks wonderful andninwa t to try the same. But please consider the execution! Best of luck with your future projects!
I read the other comments abut the electrical but no real solutions. As thick as the wood was. A paddle bit could have easily made a cavity at each junction. Then you would have been able to use wire nuts or crimp connectors instead of just electrical tape. You never see electrical tape in light fixtures because it is not a mechanically sound connection. Very cool project. Remember to make cavities for all of your wiring connections.
small thing "dont wear gloves or loose stuff (sleeves chains wristbands etc ) on anything rotating as when the blade or drill catches the stuff it will pull you in , it cattched the bare hand too but at least it will taer a small chunk off when you pull it out not pull you in up to youre armpit the end result looks realy nice though if you flipped it upside down it wouldve make an awesome headboard for a bed (uplighting)
hmm great idea! Just a couple of questions - how do you change the bulbs? (!!) Im not a leccy man, so might be a silly question, but it looks like your wiring this in parallel directly into the mains - drawing more current as you add bulbs - at what point do you know you've reached the max number of bulbs for the gauge wire you are using and current you are drawing through one mains power point? How do you know if you need resistors and/or transformer (we use 240V mains in the uk). And does this setup need to be earthed? Because in your setup, your mains socket was in the other room, couldnt you have routed the wire through the stud wall and then trunked towards the mains socket? seems a bit bold having wires trailing around an entranceway where someone / kids /pets could accidently pull/trip/chew over it :-)
Hi thanks for the comment. 1. The holes are big enough to access the bulbs with a plier. 2. I am not sure about the max bulbs the gauge can hold. Before fixing to wall I connected all bulbs and checked if it’s working or not. As far as I know if the gauge wire draws more current than it can hold the power will trip. 3. The bulbs which I chose have transformer inside them which steps down appropriately . So you would have to choose a bulb which converts the same for 240v 4. Just for the video, the wire is exposed out. I later placed it under the carpet 😊
Great idea!!! But there are some things, I would not recommend for immitations: - 26 bulbs (each 30 Watt?), cabled with low voltage cables? - 230V or 110V, drilled wires, isolated with e-tape. Did you ever heard about e.g. WAGO? ;-) hopefully that this installation will not cause any fire. - how can you change a bulb when one is over? - wouldn't it be easier to dye the wood before mounting? ;-) But really excellent idea! I like it!
I’m happy you still have all your fingers. My god man, I almost could not finish this video. The stress of watching you misuse that table saw is stressing me out!
A table vice and router would've done the job equally... But maybe he's used to using that saw like that. It's kinda like contractors that ALWAYS remove the guard from the hand held GRINDER because it always gets in the way...lol
its all good , he has his safety gloves on
What I admire about anyone making this kind of furniture is the cable or wire management. including you. very neat.
It's lethal. It will kill someone.
Beautiful Job !
To all the trolls 👿 I’m sure we would all do the electrical differently but he’s inspiring everyone to do a DIY project he wasn’t looking to get harassed about his ethnicity or skill set.
This video has 1 million views 🎉 congrats 🎈🍾
Facts... Those same Trolls just duplicated their design... Now it's a million and one views(me😊)
Beautiful??? I hope you are joking 🤦🏻♂️
This is where hobbiest and electricians begin to gap in functionality!
The use of weights to keep boards in tight against the blade was clever!
What a WOW wall. Magnificently done!!
I suggest 12vdc LED, cutting wires to two lenght, use shrink tubing and weld the wires. At 12VDC and LED it will be safer and it will last years. The project by itself is impressive, good job
Nice..just a tip....for extra safety cut one wire shorter where they connect so the negative and positive break/ connection isn't beside each other..cheers!!!
that is always a good idea. also, making the exposed wire sections smaller and using a heat shrink will make it safer and stronger. you can check my way of splicing wire in my video ruclips.net/video/OoC-g3wZ4Mc/видео.html
Tyuyuy
@@tsope1 Watch it. Nice!
The end product is beautiful being married to an electrician and helping him from time to time I was side eyeing some of the electrical work. We have some outdoor lighting its called Sylvania Smart+Zigbee Outdoor Full Color Accent Light it would be better its already wired and you can remove the garden stakes and mount each individual bulb to the end of each piece of wood I believe would give you the same effect plus you would be able to have a huge color selection and color dynamic scenes. Also I'm no carpenter or anything but I'm pretty sure the dumbell proped up against the wood while sawing is most likely a safety hazard but I get it I've seen the hubby do some shit that makes me question how he's still living but hey he is an electrician so yeah but I hope the electrical last the idea and finished product is beautiful.
Yes putting anything against lumber while ripping like that is a good way to find out about kickback. Those saws are extremely powerful and can bury lumber in dry wall.
A table saw is the most dangerous power tool in a wood shop. What they need is a feather board to properly hold the wood to the fence. Enough has been said by others about the wiring 😲
@@cmitch3087 I would not and would want to see that very conflicting lol I have a hard enough time using a router or really any power tool they are too heavy and go too fast for my liking. My husband makes fun of me because I use just a regular old school screw driver instead of a drill.
@@rogermccaslin5963 I don't know what a feather board is but I will be googling as soon as I'm done writing this. I actually enjoy woodworking I've done a few things here and there and I've found it to be very satisfying when having the proper tools.
I found this comment useful, but the lights I looked up that you mentioned aren't available on Amazon anymore and I found them for sale on a few websites only to be (and this is posted 2 years after you posted your comment) $100+ dollars for outdoor lighting? Does that sound right? Are there other options? I've been looking for a colored option for this design because I want to do it on a small wall in my living room and I'm having trouble finding anything worth a damn. Thanks! Hope you see this after 2 years. 😆
Thank you universe,what a amezing 😊
So nice i love it
Well I'm impressed!!
Good for you. I know that some might think that you were somewhat unprofessional, but hey, this is all about do it yourself. But being careful with our tools is something that everyone should make a priority. Still you appear to have escaped any serious damage and the project came out nicely. Well done.
Beautiful!!!
Hello, Wow, Congratulations Cool 👍👏👏👏 I am impressed. I love it. It looks like Heavenly Lights……..Golden Lights……like that.
Amazing duo
Looks awesome !!
Just Wow! Very beautiful and something unique
Whaou 🤩 Bravo 👏super original et professionnel !!!
First of all, this is an excellent idea to accent a wall. So props to both of you! I love it! My only suggestion is to google some different ways to wire up the backside for a cleaner look, as well as to insulate the wiring. The other suggestion I have is before starting the project is to bring the outlet on the other side of the wall and hide among the black pieces. The overall visual is amazing.
Looks awesome!
Oh so dope. Love it!
I got an "Eeeek!" moment when seeing the way the bulb wires got connected and insulated...
Thank you guys for uploading this video again, I think I shall do this at my place
Good Job my friends
- VERY, VERY BEAUTIFUL piece of craft. Thanx for sharing & giving the details.
Always cut your wires to different lengths, solder them and use both individual shrinking shrouds on the wires and one to shrink the cable!
wow great work and patience, love it ;)
Very cool project. :)
Yes, the wall looked great when done. Very interesting concept. The electrical work aside, this may be something I may want to try. Perhaps even using different materials. But the wood is an interesting choice, however. Curious! That was low voltage that was used. Correct?
Nice Job!!
You should always have the larger part of the material against the fence on the table saw. Having that little sliver against the fence can cause a bind/kick back.
I think the idea and finished product are fantastic, but even as an old woman who still does her own DIYs, I would use led light strips and a remote control to get the same affect. ' Much safer and less work, too! However, I thank you for the layout as I want to do something very similar! It's beautiful!
Remote - Yes, but I don't think light strips will give you the kind of lighting effect he wanted to achieve.
Vvv'vgvvvvvvg'
Great work! The flip flops tho 😂
Hi hi can I check with you on the dimensions of each strip please. I want to know if I can use a 30mm bulb to fit in. 😊 This looks amazingly beautiful ❤❤ I want to do one for my house too now
Fabulous vid! Thank you so very much for sharing your entire journey with this project. Done beautifully.
It looks difficult but this final project is worthy, it looks truly beautiful.
Omg, awesome, for me the biggest win is that she helped and she know what she is doing...
Mine never cooperates...😞
really loved seeing the process. I hope you are able to do more like this Thanks for all your hard work😀
wiring----very professional. Realy ! LOL
Magical
It was a very interesting video my friend, I hope you will always be successful
😍👍👍👍
Cant believe you took the time to show us how to drill a hole
Wow super cool love it 😍
Wow that is beautiful. Very impressive. Great job.
Very nice!
Chapeau bas 🎩🎩🎩🎩
Hey amazing video love the concept. Just as a electrician a little recommendation, use heat shrink over the cable extension for a safer joint. Not being negative just something for a another project. ❤️🙌🏽
Heat shrink? What kinda electrician r u bud?
@@gedionsamuel2256 @SJ Magic is correct, these are likely a low voltage system, I'd imagine not more than 12v. Thus heat shrink would make a lot of sense to clean up the wires, I'd personally also recommend soldering the wires at the joint too before adding heat shrink, but probably not all that necessary.
@@jamarforsythe7262 To be honest, it looks like the wiring is connected directly to a wall plug.
For sure, I would recommend using solder & seal connectors. They make wire connections easy without the need for soldering equipment. Also I would hot glue the wires into place to ensure they stay in place. Great job on the wall it turned out looking very nice.
On the contrary, it is a great recommendation. Safety above all

Beautiful job in the fabrication, lighting and installation. As others have noted, the electrical wiring, while functional, is unable to pass an inspection due to the use of Class 2 cabling for a Class 1 circuit. When you sell the home, this will likely be noted by a home inspector and be flagged. But, really nice work and I think the outcome is fantastic from a design and lighting standpoint.
Thanks for the idea! I love the look of this accent wall!
Its hard job.. u deserve to subscribed..
Looks great! I wish you would have provided commentary so we could do this. I know nothing about electrical and a novice to wood working but getting better. I would love to be able to do this.
He doesn't know anything about electrical or woodworking either. You're good.
Oh very nice 👍🏼
Excellent job 👏 👍
I wish all the bulbs work's fine always
well done
Nice work... congratulations
Let’s just add electrical tape to those under size wires. People will think wow it looks great I’m going to copy this in my home🤣🤣🤣
Good job, looks nice -and- looks fun to build. One suggestion, as an electrician I would always off-set my splices. A) It takes less bulk space B) it avoids any possibility of the wires touching. Not necessary here, but a better practice. Great work.
check the trim work for nails because they are usually nailed into studs
I Use a strong magnet and that will also find studs for you as it is attracted to the nails.
Stud finder’s work but I don’t think they’re necessary
Love this guys!! Thanks
Esta precioso lo que hicieron..... tengo una pregunta respecto a que aparato usaron para pintar que no vi manguera que se conecte a compresor de aire. Saludo desde Guatemala y gracias por enseñar lo que hacen esta lindo.
СУПЕР ! Отличная работа ! Молодцы !
Nice..very nice! Looks fabulous!
Definitely gonna try
Oh Gosh, The woodwork and electrical leave a lot to be expanded on and corrected. The artistic design however is awesome and the artistic view is what I have taken away and admire!
The use of pvc tape as an insulator on a joined wire is sub-optimal. I would recommend soldering and then hear shrink, and where it is on a 'T' join, Expoxy 2 part glue, or even hot glue would work really well, and wouldnt mean tape on the face meeting the wall.
When applying wood glue between timbers, apply the glue as you have, but then spread the glue with a brush in an even and thin layer, It will result in a much higher joining force and wont risk the timbers spreading once the glue hardens.
When attaching the supporting slats to the wall, avoid drilling through, already piloted timber, by doing this, you risk boring out the pre-drilled hole which will allow the timber to move when drilling the fixing. Remember 2mm off at the bottom can be 20mm off at the top.
When installing, it would have been proper to begin at the corner wall and work out. This would allow for any mis-measurements and would mean a much easier fix on installation of the final section.
DON"T GETR ME WRONG! I LOVE this install!! I just hope to share a little of what could be improved with other DIY''ers.
Much Much Love and Appreciation!
Looks great
⚡️ 🔥 Who is bringing the marshmallows? 😂
I’m not much for know it all tradesman, but I’m not sure there was one thing, electrically speaking, that was code here. The fact they had enough knowledge to wire everything properly and in parallel, yet completely disregard all things safety is mind boggling.
@@bpeterson81 Yep. At least a dab of solder on the splices! Nice creative project though.
Im bringing 3 bags HAHAHAH
@@belaygorg2659 I’ll bring the sticks.Who’s bringing the chocolate and graham crackers?
@@fieromike1 I'm adding hotdogs, be having a stopover to the market HAHAHA
I didn't see you add any slack to the wiring in the slats with the lights so how are you going to change a light bulb when one burns out?
Amazing idea. How much this project may cost in Canada?
nice work my desi bro
Awesome idea 👍🏼
i like it but the tape is no good txt time use shrink tube safer plus the wire going to the other room on the side no good look but . my question after u painted all black did u varnish the other wood and did u do the same for the black wood? but look beautiful..
Beautiful
It's very nice, but how do you replace a defective bulb ?
Stunning!
Wow so cool
I applaud what you've done - it looks fantastic. And I love the fact you've done it with basic tools and a very definite "DIY" approach. Top marks. But too often in the video I found myself taking a sharp intake of breath! Enough has been said about the wiring - please - if it's not 12v get it changed ASAP. Don't use tape. It stops being sticky. Just mix a bit of epoxy or even silicon bathroom sealant to hold the cables in the grooves. Try clamping things before screwing and use some kind of straight edge to line everything up. Screwing with such a big electric drill without a torque setting - very brave. Finally - please wear proper shoes - power tools, large pieces of wood and flip flops are not a good combination! safety always comes first But, as a say, stunning idea that looks wonderful andninwa t to try the same. But please consider the execution! Best of luck with your future projects!
what a fudge, plugged into a socket
Awesome Job!
Ammmmmazing!!!! Love it. I also love that y’all are a couple doing this fun project!!
Amazing!!!
Bellissimo 👏👏👏👏👏👏👏👏
Gorgeous!❤️
Where I can buy these kind of lights?
very nice, awesome job looks beautiful
Ganda
Looks nice but how do you change the bulbs?
Shocking 😱😱😱
I read the other comments abut the electrical but no real solutions. As thick as the wood was. A paddle bit could have easily made a cavity at each junction. Then you would have been able to use wire nuts or crimp connectors instead of just electrical tape. You never see electrical tape in light fixtures because it is not a mechanically sound connection. Very cool project. Remember to make cavities for all of your wiring connections.
Beautiful!
small thing "dont wear gloves or loose stuff (sleeves chains wristbands etc ) on anything rotating as when the blade or drill catches the stuff it will pull you in , it cattched the bare hand too but at least it will taer a small chunk off when you pull it out not pull you in up to youre armpit
the end result looks realy nice though if you flipped it upside down it wouldve make an awesome headboard for a bed (uplighting)
And why not get the wires through the wall instead of around.
Love the idea you created🔥
wow... awesome idea... BTW, where you guys lives
Absolutely beautiful 😻
Thank you for sharing 🥰❤
Looks very nice but I'm not sure if using electrical tape for all those connections is up to code.
Thanks. We felt electrical tape would suffice but there are surely more ways of doing these wirings more secure..
Definitely a nice feature. Good job.
hmm great idea! Just a couple of questions - how do you change the bulbs? (!!) Im not a leccy man, so might be a silly question, but it looks like your wiring this in parallel directly into the mains - drawing more current as you add bulbs - at what point do you know you've reached the max number of bulbs for the gauge wire you are using and current you are drawing through one mains power point? How do you know if you need resistors and/or transformer (we use 240V mains in the uk). And does this setup need to be earthed? Because in your setup, your mains socket was in the other room, couldnt you have routed the wire through the stud wall and then trunked towards the mains socket? seems a bit bold having wires trailing around an entranceway where someone / kids /pets could accidently pull/trip/chew over it :-)
Yeah i would have used a low voltage transformer and 12v lighting. And heat shrink wire wrapped all my connections
Hi thanks for the comment. 1. The holes are big enough to access the bulbs with a plier. 2. I am not sure about the max bulbs the gauge can hold. Before fixing to wall I connected all bulbs and checked if it’s working or not. As far as I know if the gauge wire draws more current than it can hold the power will trip. 3. The bulbs which I chose have transformer inside them which steps down appropriately . So you would have to choose a bulb which converts the same for 240v 4. Just for the video, the wire is exposed out. I later placed it under the carpet 😊
Led light strip on amazon 16.99 same effect and safer...nice job though
Great idea!!!
But there are some things, I would not recommend for immitations:
- 26 bulbs (each 30 Watt?), cabled with low voltage cables?
- 230V or 110V, drilled wires, isolated with e-tape. Did you ever heard about e.g. WAGO? ;-) hopefully that this installation will not cause any fire.
- how can you change a bulb when one is over?
- wouldn't it be easier to dye the wood before mounting? ;-)
But really excellent idea! I like it!
This was fun to watch, but clearly, I’m not going to do that! That’s a man’s work!
Good project. Furthermore it was a well presented video which allowed easy following. Well done.