Backyard built TURBO LS1 on the DYNO! Its time to GO or BLOW! | [The Turbo Tonner] - Ep5. Torq Hub
HTML-код
- Опубликовано: 4 окт 2024
- Welcome back to The Turbo Tonner build series.
Come with us as we take this already stout street car and look to punch above the goal of 500rwhp.
THIS IS WHAT WE'VE ALL BEEN WAITING FOR!
Time to load up, and head to Tune Corp so the Turbo Tonner can hit the dyno and show us all what its got! The SBE LS1, LJMS Stage 2 turbo cam, and ASE T800 turbo kit are all ready to be put to work.
Massive Thankyou to Shannon Summers @ Tune Corp for the killer tune up. We personally highly recommend that if you're in Western Australia and looking for a tuner to get in touch with him.
www.tunecorp.c...
/ tune-corp-465193203608941
Check it out, and leave us a comment with your feedback.
Follow us on our socials!
YT: / torqhubmedia
FB: torqhub
Insta: torqhub
TikTok: www.tiktok.com/@torqhub 
Авто/Мото
![Driving his TURBO LS for the FIRST TIME! + How much did it COST!? | [The Turbo Tonner] - Ep6.](http://i.ytimg.com/vi/qOP4ldS7s3g/mqdefault.jpg)
![Driving his TURBO LS for the FIRST TIME! + How much did it COST!? | [The Turbo Tonner] - Ep6.](/img/tr.png)
Sounds nuts when it comes on boost!!!! Gotta love making way more than planned!! Good job. Red 32 gtr looks absolutely stunning too 😍
Turbo cars always sound that bit extra special when the gate swings open! We always look to under promise and over deliver 😉
That 32R was a really neat item.
Shannon is the best. He takes care of my tunes. Big Jeep on the hoist makes a sneaky 1000+hp at the hubs 😉
Yeah that looked like a serious bit of kit!
dunno if anyone cares but if you're bored like me atm you can watch pretty much all of the new series on InstaFlixxer. I've been streaming with my girlfriend for the last couple of days xD
@Kason Thaddeus definitely, I have been watching on instaflixxer for since november myself =)
Holy shit boys, awesome numbers and video quality is through the roof!
Oh stop it you! 😍 Just having a crack and still plenty to learn! Been editing a bit on the next one, but literally just sitting down to give your new drop a bit of a razz 😉
P.S. how cool was the shirt in last week's video? 😁
Great job on the Turbo Tonner 👌
Thanks for watching Big Al. Hope you enjoyed the series mate! Can't wait to get stuck into some other projects
Nice work lads!!! Nice street cruising power!!
Hmm think I need to turbo mine now!!!!!
Would be rude not to 🤷🏻♂️😂
Nice work , some fog lights would finish that ute off nicely
I think so too Clintonio. But the missing foggie on the passenger side at least makes for a great cold air intake!
Thanks for watching mate 👍🏻
Good job
Good info, trying to decide between turbo or stroking and staying na.
Like the little Mexican girl on TV always says...
Por que no los dos? 🤷🏻♂️😂
@@TorqHub lol i'm getting old and the handbrake says one or the other
As we'll hopefully be able to show n the next video, as far as drivability, and cruising, turbo is hard to beat. Drive like stock, until you put the boot in!
But like you, we're also pretty fond of that old school style rumble of a tough N/A combo too!
Good one boys.
Oh keen! 👍🏾
Nice 1.
Nice content lads 😉
Is there a parts list somewhere that you used on this build ?
In the final instalment of the series we went through parts and costs mate, you can find it here;
ruclips.net/video/qOP4ldS7s3g/видео.html
Nice work boys 👌🏼👌🏼🤜🏼
Thankyou dude 😁
Wholly shit . Rob well done
Wow thats alot of power out of a LS1 😂 Subscribed lol
We were very happy with the result for this turbine limited combination. Thanks for watching! And welcome aboard.
Niiice boys. What Garrett turbo was that again? Can you remeber what size turbine housing? When did it start spooling in relation to revs and when was it on full boost..??
It's a GT4088r turbo mate, 1.06 rear housing from bad memory...
Has had a 70mm billet compressor wheel fitted by Per4manz Turbo. Full boost by 3400rpm, carries it all the way to peak power at 6k
@@TorqHub mate thats so awesome, really useable power it seems great job
Perfect for what Rob wanted mate. Next video we'll be taking it for its maiden voyage! With any luck we'll be able to show everyone how grunty but streetable it is! Hopefully we don't show it broken down or crossed up off the road 😂
How much did you put in that motor I wanna make a junkyard ls1 with 400hp with only 2.5k is it possiblev
We did a full cost breakdown in the next video in the turbo tonner series mate.
You could definitely do 400rwhp N/A LS1 for $2.5k if you're handy on the tools and the keyboard 👌🏻
What state you guys from??
We're in south west WA mate.
What sorta cam do you have in it?
BTR/LJMS stage 2 turbo cam mate.
There's a video in the series of us doing the install with cam specs 👌🏻
@@TorqHub awesome thanks heaps m8
Muchly appreciated 👍
@@TorqHubIve got vy SS 303rwkw na Higgins race heads 6 speed magnum twin plate but I dunno if I would yield best results with my cam vcm13 238_242@112 basically like a turbo killer cam plan is turbo killaboost manifolds pulsar turbo xpurt 1000cc injectors Walbro 525 intank also run pro series Aeroflow cooler,will I still make decent numbers with cam? And if it's no good can always swap cam for a little stage 1or 2 btr turbo cam
That is so pretty 🤩
What is the transmission?
T56 6-speed manual, Sam 👍🏻
👍👍👍
Woaaahhh!!! Mine next!! Haha
Just join the queue mate, we'll call your number when you're up 😂😂
Great job guys.
Thanks mate! Thanks for watching as always!
E85?
Pump 98 mate. The 60lb injectors don't have enough head room for E85, and it's not readily available in Robs area.
Wow impressive.. yes my 60s ran out at 5psi on e85.