I purchased the R12 CLX 177 Bolt action brand new 1 week old and did it with me within HALF A TIN of pellets. sent it back and they said in the report to make sure your pellets are seated properly in the magazine. I have 9 air rifles and a good few pistols. so it's my fault guess what did it again how many more times. Traded the gun in for the new FX Panthera 177 absolutely fantastic air rifle happy shooting now😁 😁😁😁😁
Glad I came across this video, my friend John bought one about a month ago and , he phoned me last wk and said the gun wouldn’t cock , cut a long story short , he took the stock off and turned the gun upside down and a pellet dropped out , I will mention this when I review the gun shortly on my RUclips channel , thanks shaneweightman
So glad I found your review, was going to purchase the R12 this weekend, will be getting the hw100 I think. To much hassle with this gun by the look of it. Thank you for your review you have saved me a load of hassle
A year later but I'm at a similar point, choosing between the this R12 or the HW100T. The adjustable cheek-piece & greater capacity bottle options made me look at the R12, but I reckon I'll stick with my first consideration and go with the HW100T. Thanks for the video.
I had Pellets jamming and shaving in the 2 R10se rifles I owned. Shot ok on the level but when hunting shooting up at angle while keeping the rifle on the rest and cycling the bolt both rifles jammed or damaged pellets when loading . I often lost the chance to bag a second bird, If you own a BSA rifle try testing it by safely shooting from a gun rest at a angle cocking and shooting the rifle at various angles to see if it jams.
I’ve had mine in bits today to have a look what’s going on. I am going to chuck it up in the lathe in a fixture I have made so that I can deepen the o ring groove ever so slightly. There isn’t much material to play with but if it fails, I will be remaking the anodised part on the CNC machine. If either of these methods are successful, I will be happy to modify other magazines for people for a very small cost, or i could provide a new inner for the magazines
@@sibfishingadventuresuk1558 I will do. I’m hoping that deepening the groove ever so slightly will allow the o ring to hold on to the pellets much better
That was my thought too. I can't see changing o-rings helping as they will only sit at the same level. If the new o-ring is too fat, it could even prevent it sitting in the bottom of the groove and make matters worse. Yes, the o-ring needs to sit deeper across the pellet aperture. By the way, if you think that magazine is fiddly, try a Daystate Wolverine mag!
Day 1 out of the box and it jammed, yes it pulled pellets back into the block, there is a side plate on the block, remove this and the pellets fall out....The cause was the magnet came out of the mag and jammed the the mag, sent back to BSA, returned in a week with a free mag. Araldite the magnets and since then I've put 2k pellets through it and no issues (using only BSA Gold). Never had issue with pellets falling out.
I was informed by my gun shop that there was a fault with rifle. I went to purchase the 1.77 but was told they would not accept rifle from BSA till fault had be resolved. I can only thank the shop for not allowing me to buy.
This issue also occurred on my .22 Ultra CLX. Again BSA say user issue but I found a pellet stuck to the probe and pulled back into the mechanism even when pointed downwards. I agree the main issue is the size of the aperture into the trigger mechanism and ill fitting of pellets into those very expensive magazines. Shorter pellets seemed to be the main culprit whereas JSB Exact seem to fit better.
It's disgusting how the after service department immediately tell a customer that they are they are the issue when they have had the same complaints from numerous owners of a new to market rifle . I've always believed that the rifles most reviewer's get have been thoroughly checked , tweaked and tuned by the factory before they get sent out , it's either that or most reviewers are dishonest liars and aren't telling us how the rifle broke down on them and needs more QC.
Had exactly the same problem with my BSA Ultra CLX in .22 but the pellet is stuck behind the hammer so has gone back to the shop to be repaired. The guy knew about this problem as soon as i told him what was going on with the rifle. 17:04
Thanks for this. Although I have an AA Ultimate Sporter .177 and a HW100KT .177 I was considering getting one of these in .177 but will not be doing so now. I checked this out and you are right people are having this issue with the magazines. I think it is awful you were told user error and this should have gone straight back to BSA. That is a bad fault! I have had issues with my AA and my HW both with air leaks BUT both went back without question and were repaired under warranty quickly and no problems since.
You would expect being new there are gonna be some issues I understand that and yea probably should have waited for these to be ironed out .. something this simple thou it's really bad. I've actually got to ring my rfd tomorrow has BSA have reached out and want to address these issues
@sib fishing adventures UK Same problem as you rifle dragging pellets back and can't cock! Used the other mag supplied and it seems OK so far,definitely a magazine problem. Keep us all informed what BSA are going to do to remedy this problem. Thanks for highlighting as it's terrible to pay so much money out on this air rifle
Thank you very much for taking the time to do this video I am on the market for a new air rifle and my local rfd has been pushing me towards the r12 and I was just about to order one I intended getting the .22 but having read the comments on here I think I should hold on to my money and look for something else.
I brought a .22 R12 . Leaked like a sieve. Took it back and swapped for a .177 . Had numerous magazine issues and numerous trips back to RFD. The recall was the final straw for me . I was told the regs could explode even though BSA denied this when I wrote to them . The quality stamp on the manual doesn’t mean a wank . I eventually had a full refund and switched to an Air Arms S510 Ultimate sporter R. Never going near a BSA again.
@@sibfishingadventuresuk1558 I was loading flat and loaded 2 .177 pellets, got them out and found it would not cock, all sorted now and I have added a second O rind on the front gauge area to tighten up the housing 👍
I not long ago purchased the BSA Ultra CLX in.22 and have the same issue. I have a pellet jamed behind the hammer. It's in a dangerous condition so it is going in to be repaired. The issue is that sometimes it won't cock properly other times when you pull back on the bolt load and push forward on the bolt it fire's without touching the trigger. BSA need to fix this issue.
I will never load gun pointing up, h+n ftt 177 work well they are a short pellet wonder whether that helps, pluss when i load i wiggle and tap the mag to seat pellet deeper in mag. Shouldn't have to do this, do not not not let it lie keep having a go at them, all the best pal!
I had a BSA SuperTen in about 2001 and the magazines were awful. Amazing that this is still a problem nearly a quarter of a century later! I got myself a Rapid instead and didn't look back.
Watched a guy on YT have to rework the barrel on his 12,had to recrown it ,and he made a longer probe to seat the pellet in further to slightly engage the rifling,if you put a pellet in the chamber and tipped the barrel up the pill would fall out. It shot fine after the extensive rework!!
Shouldn't be able to fall out once the pellet is loaded in barrel The issue was the mag wasn't holding the pellet and the prob hole was as big as a 7.62 ., seems a little off centre the whole.thing too Now they have released the slx r12 which was a year in the making lol to correct all these issues I believe
Very disappointing to see bsa's brand new flagship rifles are not being thoroughly tested at the factory before getting sent out , back in 2008 when bsa revealed the pictures of its new ( yet to go on sale ) flagship rifle that was retiring the super ten ,people were excited , the prototype rifle looked leagues above the super tens ,a quick fill and a gauge , that was a major thing back then , so in 2009 when the first r tens ( the mk1) started to hit shelves , they sold instantly , however most people who bought one were back at the gunshop within a few days , the regulators used in the rifles were failing massively , usually it was power inconsistencies that were the problem ( in turn causing accuracy issues ) . It's a shame the r tens started off so bad , bsa eventually did a MK2 r ten before even releasing that model , the mk 1s ended up with re worked regulator's getting installed ( just to get the rifles to sell ) I bought one of the re worked mk 1s and it served me well for 2 years , not one problem at all . I then bought a super carbine MK2 , again no problems and never once broke down in the 2 years I kept if for .
Had mine for a while sent loads of tins down it. Had no problem what so ever. It awesome. Pellet on pellet 30 40 50 yards. Every gun has their problems. Dont mean you have to throw your dummy out the pram
@sibfishingadventuresuk1558 5yrs. It only 12 months old.. 50 yards I was getting them in a 10p coin group. What was you getting beens you say your grouping was shite. What pellets was you useing??
I bought a nylon hw100 mag in 177. Pellets came out the same. Made the groove a tad deeper with a small round file on each section between the pellet holes. Bingo. Works a treat now.
You’re absolutely right. Unfortunately there is very little material left to enable going too much deeper. I’m going to have a go with mine to see if i can make enough of a difference
Hello, good video, wish i had seen your video before i bought my BSA R12 CLX PRO .177 black pepper laminate, £1000+ I thoght, better try mine, loaded 1 magzine with 3 brands of .177, (WASP 4.5mm made by Bilsley) (JSB EXACT 4.5mm) (BSA GOLDSTAR 4.5mm) loaded 1 pellet at a at a time, turned the mag upside down and banged it the table, not one fell out, even when cocking the the side lever and loading with the rifle muzzel pointing upwards (virtical) so far so good, hope you get your's sorted and happy shooting..
If you are replacing any o ring on the internals of your rifle make surevyou know the shaw ratting of the rubber it's made from , a lot of people go to the normal DIY shops and buy loads thinking they will do the job , they won't if they are holding any kind of air pressure , that's where specific Shaw ratings are required, I'd recommend looking for the white o rings that best fittings and others sell , they last a lifetime , actually I've never had one fail on me , they are great for the oring needed on the bottles of the r tens and 12s .
Okay, I've got a BSA R 10 and R12. The R10 magazine used to misfeed the pellets occasionally. I took the magazine's apart, removed O ring and used a junior hacksaw to cut a deeper groove. End result is a tighter group and no missfeads. R12 is mangling pellets but it's metal so not sure if the same treatment will work. I think it's outrageous that we spend a lot of money and are then told it's user error. It's not user error but a failure to properly test the design. Perhaps we could start a group and gather enough people to put pressure on BSA to fix this design error?
Sounds like they cut the o ring groove in both calibres to the same depth, when drilled for .22 the o ring sits deeper so it holds the pellet firmer. This is a fundamental machining error on bsa’s part. Try making the groove deeper?
I can beat the lot after owing 6 r10s with know problem I purchased a .22 r12 .First time I went out to test it it did not work it would not revolve the magazines so sent it back and got it back I'm still to test it again how can that have happened when they are meant to test the rifles before sending them out to the shops to sale
for £1000 imo there should be NO "quirks" or issues with a gun, for that much money i want flawless. maybe thats unrealistic but if its not flawless for that money i wont buy it. i saw reviews of the Ultra CLX by bsa (£650 rifle) had the mounting nut for the stock too far forward so it caused leverage and also had very little wood on the actual stock to stop the bolt pulling through, also the mag springs were too tight and took shavings off the skirts of pellets and built up in the gun. i got my first PCP today, gamo phox starter kit, pump and all that for £530, it doesnt have a single one of these issues. it really feels like BSA dropped the ball on the "CLX" stuff which is a shame cause it was supposed to be a show of their optimal engineering, the pinnacle of 160 years of being in business, and they all end up having issues. damn shame.
It was highly anticipated for me could wait to get it, the r10 I had was a fabulous bit of kit but only after it was tuned but airtech although it's was a blueprint of johns .. honestly it's been such a disappointment all they have done it's throw a different stock and a buddy bottle in the ultra clx which has exactly the same issue ..
change the o-ring all you want, its not going change the fact the groove needs to be deeper, the o-ring is never going to come in contact with the pellets enough
i had a problem with the o ring snapping on me took the magazine apart its a nightmare to get the spring back on ,i used thicker ones had no problems since
Yea gotta expect the orings to wear and break they are fiddly..I am really tempted to get the slx .. I did say I wouldn't buy another Bsa after the last
As I've just purchased one of these from airgun centre yesterday, this is a little disappointing to me😢 thanks for doing this video, very informative, i left airgun centre yesterday thinking i didn't want to spend a penny more in there sensing a funny attitude and i had to pull them on the fact there should be two magazines with the x demo deal i was purchasing! They checked thier advertisement before giving me another one, not sure what to do now?
@sibfishingadventuresuk1558 Had this gun now since my first post, happy to report no issues whatsoever, very happy 😀 obviously my magazine's are the revised ones, still never going to walk back into Airgun centre though 😉 I've found May's of London, they couldn't be more friendly and helpful 👌🏻👍🏻
Had magazine issues with pellets not feeding correctly but my local gun shop has been told by his BSA rep that there are new magazines and has got a new on the way to the shop for me.
Shocking service , I would be fuming with that!!..you shouldn't have be doing that fix on a new bloody gun..I feel for you.. every BSA I've had , I've always used 4.53 pellets as Bsa barrels tend to like them. Or some sort of pellet sized may help.
i had this on my BSA lightning, the 4.51 air arms diablos would fall out of the barrel if i cocked too hard but 4.52 were tight. his issue isnt a slightly loose tollerance etc, they were falling into the action, shocking oversight i dont know how they havent recalled them over that much of a design flaw
So if you are rabbit shooting off a bipod and drop one and you have to stand up and point the rifle downwards before you can take another shot ? Well done BSA !
It’s such a disappointment that the manufacturers don’t listen to the feedback from consumers. BSA just keep sending out guns with faults. The R10, R10 se, the R12, 🙄 I can only assume that the the management at BSA are only interested in short term profits and have no interest in the products they sell only the cars they drive and the pay check at the end of the month.
Yes it's crazy .. the bsa always had it's problems same as other manufacturers but they were always expected especially regulator issues I think bsa still make there own even thou there are poor and cause 90% of there customer complaints just buy in the huma or airtech reg and be done . But this new clx block and magazine issue really does take the piss, 5 years in the making and still this issue off a manufacturer that's been in the game for 160 years
Yes 3 different tins .. 2 of which came from bsa themselves.. every pellet available of a decent quality. Took to my local rfd 3 weeks ago has I was still having problems. And not happy ( not the rfd where I perchanced but where it got delivered to ) he questioned me alot sticking up for bsa as expected, the famous quote ( let me see ) like I wasnt being untruthful, he cocked it without putting a magazine in and said " yes that's going back "
Them R12s are getting near £1000, not good enough from BSA. Are the likes over Air Arms having issues to the same level rifle ref S510r?? Ive owned the HW100KT and no issues like this. Its a shame as BSA do make accurate rifles but this is a massive issue. My BSA Scorpion SE had mag issue's.
I was about to buy a clx pro within the next 2 weeks but will hold off now I’ve learned about this loading issue. Reading the forums it appears to be the magazine hole size is too big allowing .177 pellets to fall out.Obviously not every rifle has this problem but it’s obviously either a design flaw or quality control issue with some of the magazines. I see no reason why bsa can’t immediately address this issue by slightly redesigning the magazines??
This should not be happening on a rifle of this quality, after all its not a budget rifle. I was considering updating from my R10 i think i will stick with what i have. Thanks for the tip off.
I can't understand these BSA fanboys. Can you imagine buying a brand new car and immediately having to take it apart and replace parts of the engine with after maket bits to get it to run properly and then telling everyone it was a fantastic car? This is not the first video I've watched listing BSA problems, which wouldn't be so bad if it was a £500 gun from China but for the price its disgraceful. A few years back I bought a new FAC BSA R10SE which turned out to have a sticky bolt and an inconsistent regulator. The RFD sent it back to BSA who seemed to have just pumped a load of grease around the bolt. It was no better. Got lots of on-line advice from other owners, like sending it to 3rd party whizz kids who would replace bits and tweak this and that (£££) after which I would have a marvelous rifle! Are you kidding me? It was rapidly swapped for an Air Arms S510 FAC which cost about the same at the time and which worked perfectly out of the box and through a few years of wet weather and cold winters doing pest control. At the same time I also had a new HW100 sub 12 which, like the S510, worked perfectly out of the box.
Nothing ... They say they have been to the supplier of the mags to kick their arse and tighten up the spec but nothing as or yet . Local stop had a new r12 in and the mags are still the same
Simple fix. Buy a weihrauch or an air arms. Had several bsa pile of crap everyone them waste of money. There customers service is next to useless. Only good bsa is one that John bowket has rebuilt.
what youve just showed me is that same with the clx altra, and i couldnt even get mag out of the gun due to pellets jamming up barrel. very poor design. wont bye another one.cheers
the only way to get mag out is to get soft peice of wood and pull hammer back hit it . mine came out first time , hope this helps @@sibfishingadventuresuk1558
You would expect better from a UK made air rifle with the heritage that BSA had. User error, what a joke. You should just be able to buy and shoot for the next 10 years or more, with a bit of servicing. Do you know if the Ultra CLX's have the same issues as someone wants my Air Arms S510 that has been trouble free for the last eight years in part ex for one.
Problem is .. it was £1200 plus didn't work out the box didn't work after the orings and still didn't work after bsa had it back so .. yea that's the fuss
@Urban Spaceman C'mon now. A rifle at this price which is supposed to be the epitome of 160+ years of BSA air rifle manufacturing better damn well have a magazine that holds and cycle ALL the standard pellets wouldn't you agree?
.....carrying on watching mate.....you shouldnt be having to put anything in the fucking gun....its a bad design fault on bsa part.....hope you get some satisfaction....or at least compensation off bsa
95% of my shooting is Hunting Crows pigeon, squirrel, which nearly always involves shooting up into trees. Unfortunately BSA Rifles are not fit for this purpose and worse still BSA have a long record of producing models with the same faults. I can only assume that the BSA management don’t really care about the quality or reliability of their products only making a quick buck , The fate of a lot of Uk businesses ,is management who have no interest in the product just short term profits. It will finish the company 😔one day.
Having had two bsa guns in the last three yrs will never buy another ,,nothing but niggly problems ,leaking air seals I've had 3 in last 6 months,and now the gauge is leaking
I purchased the R12 CLX 177 Bolt action brand new 1 week old and did it with me within HALF A TIN of pellets. sent it back and they said in the report to make sure your pellets are seated properly in the magazine. I have 9 air rifles and a good few pistols. so it's my fault guess what did it again how many more times. Traded the gun in for the new FX Panthera 177 absolutely fantastic air rifle happy shooting now😁 😁😁😁😁
Glad I came across this video, my friend John bought one about a month ago and , he phoned me last wk and said the gun wouldn’t cock , cut a long story short , he took the stock off and turned the gun upside down and a pellet dropped out , I will mention this when I review the gun shortly on my RUclips channel , thanks shaneweightman
So glad I found your review, was going to purchase the R12 this weekend, will be getting the hw100 I think. To much hassle with this gun by the look of it. Thank you for your review you have saved me a load of hassle
A year later but I'm at a similar point, choosing between the this R12 or the HW100T. The adjustable cheek-piece & greater capacity bottle options made me look at the R12, but I reckon I'll stick with my first consideration and go with the HW100T. Thanks for the video.
@@oldfartinthenight9201you won’t go wrong with the Weihrauch, love mine, never had a problem with it.
@@johnseabrook1703 Cheers John, I will be going for the HW100T when I get my 'business case' approved...or spend the same amount on my better half 😃
We glad I watched it I was just about to buy a r12… no thank you … British engineering at its finest again
I had Pellets jamming and shaving in the 2 R10se rifles I owned. Shot ok on the level but when hunting shooting up at angle while keeping the rifle on the rest and cycling the bolt both rifles jammed or damaged pellets when loading . I often lost the chance to bag a second bird, If you own a BSA rifle try testing it by safely shooting from a gun rest at a angle cocking and shooting the rifle at various angles to see if it jams.
I’ve had mine in bits today to have a look what’s going on.
I am going to chuck it up in the lathe in a fixture I have made so that I can deepen the o ring groove ever so slightly.
There isn’t much material to play with but if it fails, I will be remaking the anodised part on the CNC machine.
If either of these methods are successful, I will be happy to modify other magazines for people for a very small cost, or i could provide a new inner for the magazines
Get some pictures
@@sibfishingadventuresuk1558
I will do. I’m hoping that deepening the groove ever so slightly will allow the o ring to hold on to the pellets much better
That was my thought too. I can't see changing o-rings helping as they will only sit at the same level. If the new o-ring is too fat, it could even prevent it sitting in the bottom of the groove and make matters worse. Yes, the o-ring needs to sit deeper across the pellet aperture. By the way, if you think that magazine is fiddly, try a Daystate Wolverine mag!
How did it go?
@@owensparks5013 perfectly! It certainly fixed the issue
Day 1 out of the box and it jammed, yes it pulled pellets back into the block, there is a side plate on the block, remove this and the pellets fall out....The cause was the magnet came out of the mag and jammed the the mag, sent back to BSA, returned in a week with a free mag. Araldite the magnets and since then I've put 2k pellets through it and no issues (using only BSA Gold). Never had issue with pellets falling out.
I was informed by my gun shop that there was a fault with rifle. I went to purchase the 1.77 but was told they would not accept rifle from BSA till fault had be resolved. I can only thank the shop for not allowing me to buy.
This issue also occurred on my .22 Ultra CLX. Again BSA say user issue but I found a pellet stuck to the probe and pulled back into the mechanism even when pointed downwards.
I agree the main issue is the size of the aperture into the trigger mechanism and ill fitting of pellets into those very expensive magazines.
Shorter pellets seemed to be the main culprit whereas JSB Exact seem to fit better.
It's disgusting how the after service department immediately tell a customer that they are they are the issue when they have had the same complaints from numerous owners of a new to market rifle .
I've always believed that the rifles most reviewer's get have been thoroughly checked , tweaked and tuned by the factory before they get sent out , it's either that or most reviewers are dishonest liars and aren't telling us how the rifle broke down on them and needs more QC.
Had exactly the same problem with my BSA Ultra CLX in .22 but the pellet is stuck behind the hammer so has gone back to the shop to be repaired. The guy knew about this problem as soon as i told him what was going on with the rifle. 17:04
Thanks for this. Although I have an AA Ultimate Sporter .177 and a HW100KT .177 I was considering getting one of these in .177 but will not be doing so now. I checked this out and you are right people are having this issue with the magazines. I think it is awful you were told user error and this should have gone straight back to BSA. That is a bad fault! I have had issues with my AA and my HW both with air leaks BUT both went back without question and were repaired under warranty quickly and no problems since.
You would expect being new there are gonna be some issues I understand that and yea probably should have waited for these to be ironed out .. something this simple thou it's really bad. I've actually got to ring my rfd tomorrow has BSA have reached out and want to address these issues
@sib fishing adventures UK
Same problem as you rifle dragging pellets back and can't cock!
Used the other mag supplied and it seems OK so far,definitely a magazine problem.
Keep us all informed what BSA are going to do to remedy this problem.
Thanks for highlighting as it's terrible to pay so much money out on this air rifle
Thank you very much for taking the time to do this video I am on the market for a new air rifle and my local rfd has been pushing me towards the r12 and I was just about to order one I intended getting the .22 but having read the comments on here I think I should hold on to my money and look for something else.
Check out the r12 group on Facebook .. it's a massive design floor .. personally I'd buy the fx
I brought a .22 R12 . Leaked like a sieve. Took it back and swapped for a .177 . Had numerous magazine issues and numerous trips back to RFD. The recall was the final straw for me . I was told the regs could explode even though BSA denied this when I wrote to them . The quality stamp on the manual doesn’t mean a wank . I eventually had a full refund and switched to an Air Arms S510 Ultimate sporter R. Never going near a BSA again.
using the ,510 makes you think why you when with the r12 in the first place ..
Can't believe my bsa ultra ended up with a pellet stuck inside like yours, watched your video and I have now fixed my gun 👍👍👍👍
Glad it was helpful .. still having issues myself
@@sibfishingadventuresuk1558 I was loading flat and loaded 2 .177 pellets, got them out and found it would not cock, all sorted now and I have added a second O rind on the front gauge area to tighten up the housing 👍
I not long ago purchased the BSA Ultra CLX in.22 and have the same issue. I have a pellet jamed behind the hammer. It's in a dangerous condition so it is going in to be repaired. The issue is that sometimes it won't cock properly other times when you pull back on the bolt load and push forward on the bolt it fire's without touching the trigger. BSA need to fix this issue.
I will never load gun pointing up, h+n ftt 177 work well they are a short pellet wonder whether that helps, pluss when i load i wiggle and tap the mag to seat pellet deeper in mag. Shouldn't have to do this, do not not not let it lie keep having a go at them, all the best pal!
I had a BSA SuperTen in about 2001 and the magazines were awful. Amazing that this is still a problem nearly a quarter of a century later! I got myself a Rapid instead and didn't look back.
I did like the super 10 and the r10 I really hope the slx r12 is the improvements
I have had mine since launch date never had an issue but interesting video
Watched a guy on YT have to rework the barrel on his 12,had to recrown it ,and he made a longer probe to seat the pellet in further to slightly engage the rifling,if you put a pellet in the chamber and tipped the barrel up the pill would fall out. It shot fine after the extensive rework!!
Shouldn't be able to fall out once the pellet is loaded in barrel
The issue was the mag wasn't holding the pellet and the prob hole was as big as a 7.62 ., seems a little off centre the whole.thing too
Now they have released the slx r12 which was a year in the making lol to correct all these issues I believe
If h get a goid un..they good..but the problem with bsa...8.out of 10. R crap
thank you for letting me know about the problem I was seriously thinking of buying one today but now I've seen that. not a chance thx again
I know that the magazines are undergoing magor changes so everything is in evolution hopefully it will be what it should because it feels beautiful
Don’t touch one there crap I’ve had several bsa and everyone was faulty.
Very disappointing to see bsa's brand new flagship rifles are not being thoroughly tested at the factory before getting sent out , back in 2008 when bsa revealed the pictures of its new ( yet to go on sale ) flagship rifle that was retiring the super ten ,people were excited , the prototype rifle looked leagues above the super tens ,a quick fill and a gauge , that was a major thing back then , so in 2009 when the first r tens ( the mk1) started to hit shelves , they sold instantly , however most people who bought one were back at the gunshop within a few days , the regulators used in the rifles were failing massively , usually it was power inconsistencies that were the problem ( in turn causing accuracy issues ) .
It's a shame the r tens started off so bad , bsa eventually did a MK2 r ten before even releasing that model , the mk 1s ended up with re worked regulator's getting installed ( just to get the rifles to sell ) I bought one of the re worked mk 1s and it served me well for 2 years , not one problem at all .
I then bought a super carbine MK2 , again no problems and never once broke down in the 2 years I kept if for .
I had that too and yes, it's a shame I sold it and got the GAMO Bullpop, no problems 😉
Had mine for a while sent loads of tins down it. Had no problem what so ever. It awesome. Pellet on pellet 30 40 50 yards. Every gun has their problems. Dont mean you have to throw your dummy out the pram
Not throwing the dummy mate it's £1000 5 years in the making. Groups where shit down because it's was over 50% of guns
@sibfishingadventuresuk1558 5yrs. It only 12 months old.. 50 yards I was getting them in a 10p coin group. What was you getting beens you say your grouping was shite. What pellets was you useing??
Nothing wrong with accuracy.. the rifle was advertised 5years in the making .. watch the vid again
@sibfishingadventuresuk1558 stick to your wanker sport. That's fishing.. Welsh away got a problem with British made
Good video.
Sounds like the groove the O ring sits in should be a touch deeper. This will allow O ring to grip pellets better.
I was gonna Dremel it down alittle but wanted to try the orings first
I bought a nylon hw100 mag in 177. Pellets came out the same. Made the groove a tad deeper with a small round file on each section between the pellet holes. Bingo. Works a treat now.
You’re absolutely right. Unfortunately there is very little material left to enable going too much deeper.
I’m going to have a go with mine to see if i can make enough of a difference
Hello, good video, wish i had seen your video before i bought my BSA R12 CLX PRO .177 black pepper laminate, £1000+
I thoght, better try mine, loaded 1 magzine with 3 brands of .177, (WASP 4.5mm made by Bilsley) (JSB EXACT 4.5mm) (BSA GOLDSTAR 4.5mm) loaded 1 pellet at a at a time, turned the mag upside down and banged it the table, not one fell out, even when
cocking the the side lever and loading with the rifle muzzel pointing upwards (virtical) so far so good, hope you get your's sorted
and happy shooting..
No it went back and refunded
sorry to hear that, what have you got now?..
😮 I got mine the 1st week of release. I've never had an issue
.177 or .22
If you are replacing any o ring on the internals of your rifle make surevyou know the shaw ratting of the rubber it's made from , a lot of people go to the normal DIY shops and buy loads thinking they will do the job , they won't if they are holding any kind of air pressure , that's where specific Shaw ratings are required, I'd recommend looking for the white o rings that best fittings and others sell , they last a lifetime , actually I've never had one fail on me , they are great for the oring needed on the bottles of the r tens and 12s .
Nah I won't be I'm waiting on new probe orings then if it still don't shoot true I'm seeking my options
Okay, I've got a BSA R 10 and R12. The R10 magazine used to misfeed the pellets occasionally. I took the magazine's apart, removed O ring and used a junior hacksaw to cut a deeper groove. End result is a tighter group and no missfeads.
R12 is mangling pellets but it's metal so not sure if the same treatment will work.
I think it's outrageous that we spend a lot of money and are then told it's user error.
It's not user error but a failure to properly test the design.
Perhaps we could start a group and gather enough people to put pressure on BSA to fix this design error?
The O ring groove is not quite deep enough which is why using different rings doesn't reliably retain the pellets.
Does the O ring go into the pellet chamber I assume that’s how they are supposed to hold the pellets in.?
Sounds like they cut the o ring groove in both calibres to the same depth, when drilled for .22 the o ring sits deeper so it holds the pellet firmer.
This is a fundamental machining error on bsa’s part.
Try making the groove deeper?
Very disappointing to hear problems like this with such a premium gun. You’re right, all the reviews were on .22s
I can beat the lot after owing 6 r10s with know problem I purchased a .22 r12 .First time I went out to test it it did not work it would not revolve the magazines so sent it back and got it back I'm still to test it again how can that have happened when they are meant to test the rifles before sending them out to the shops to sale
Cheers mate .....was seriously thinking of getting one.....not a chance in hell now
I wondered why there are so many of these on the second hand market.
for £1000 imo there should be NO "quirks" or issues with a gun, for that much money i want flawless. maybe thats unrealistic but if its not flawless for that money i wont buy it. i saw reviews of the Ultra CLX by bsa (£650 rifle) had the mounting nut for the stock too far forward so it caused leverage and also had very little wood on the actual stock to stop the bolt pulling through, also the mag springs were too tight and took shavings off the skirts of pellets and built up in the gun. i got my first PCP today, gamo phox starter kit, pump and all that for £530, it doesnt have a single one of these issues.
it really feels like BSA dropped the ball on the "CLX" stuff which is a shame cause it was supposed to be a show of their optimal engineering, the pinnacle of 160 years of being in business, and they all end up having issues. damn shame.
It was highly anticipated for me could wait to get it, the r10 I had was a fabulous bit of kit but only after it was tuned but airtech although it's was a blueprint of johns .. honestly it's been such a disappointment all they have done it's throw a different stock and a buddy bottle in the ultra clx which has exactly the same issue ..
change the o-ring all you want, its not going change the fact the groove needs to be deeper, the o-ring is never going to come in contact with the pellets enough
i had a problem with the o ring snapping on me took the magazine apart its a nightmare to get the spring back on ,i used thicker ones had no problems since
Yea gotta expect the orings to wear and break they are fiddly..I am really tempted to get the slx .. I did say I wouldn't buy another Bsa after the last
As I've just purchased one of these from airgun centre yesterday, this is a little disappointing to me😢 thanks for doing this video, very informative, i left airgun centre yesterday thinking i didn't want to spend a penny more in there sensing a funny attitude and i had to pull them on the fact there should be two magazines with the x demo deal i was purchasing! They checked thier advertisement before giving me another one, not sure what to do now?
The rifle might be fine if it is it's bang on .. they are said to have fixed the issue but regular comments on here suggests otherwise..
@sibfishingadventuresuk1558 Had this gun now since my first post, happy to report no issues whatsoever, very happy 😀 obviously my magazine's are the revised ones, still never going to walk back into Airgun centre though 😉 I've found May's of London, they couldn't be more friendly and helpful 👌🏻👍🏻
Ratworks, they will sort that problem. Sorted the exact same problem on my Ultra CLX.
Had magazine issues with pellets not feeding correctly but my local gun shop has been told by his BSA rep that there are new magazines and has got a new on the way to the shop for me.
Ring bsa direct as you speak to Innes ! There are no magazines as of yet who is your local gun shop
I had the same prob!em with my clx, wouldn't have another BSA, so irritating
Shocking service , I would be fuming with that!!..you shouldn't have be doing that fix on a new bloody gun..I feel for you.. every BSA I've had , I've always used 4.53 pellets as Bsa barrels tend to like them. Or some sort of pellet sized may help.
I've tried every size .. the rifle is returned and refunded
i had this on my BSA lightning, the 4.51 air arms diablos would fall out of the barrel if i cocked too hard but 4.52 were tight. his issue isnt a slightly loose tollerance etc, they were falling into the action, shocking oversight i dont know how they havent recalled them over that much of a design flaw
So if you are rabbit shooting off a bipod and drop one and you have to stand up and point the rifle downwards before you can take another shot ? Well done BSA !
My point exactly
My clx is in 22 and jammed up at the moment disappointing hardly covers it !
Shocking for 5years in the making .. and sales pitch everyone should demand a refund
It’s such a disappointment that the manufacturers don’t listen to the feedback from consumers.
BSA just keep sending out guns with faults.
The R10, R10 se, the R12, 🙄 I can only assume that the the management at BSA are only interested in short term profits and have no interest in the products they sell only the cars they drive and the pay check at the end of the month.
Yes it's crazy .. the bsa always had it's problems same as other manufacturers but they were always expected especially regulator issues I think bsa still make there own even thou there are poor and cause 90% of there customer complaints just buy in the huma or airtech reg and be done . But this new clx block and magazine issue really does take the piss, 5 years in the making and still this issue off a manufacturer that's been in the game for 160 years
Bsa stands for Best Shit About Airsporter was good 👍
Ok, AA S510 Ultimate Sporter it is then… thanks 🙏🏼
Wow I was literally just about to push the button and order one.
Fantastic video thanks.
Mmm what do I get now???
Fx or airarms
I echo the last comment thanks for the info.
The R-10 is the same, use different pellets, we tried a number of different ones, the pellet skirts were the issue.
Thats not the only problem with the bsa mags after a while they slip and then the pellet holes dont line up properly with the barrel
What pellets are you using?
Tried alot
The BSA pellets they supplied
Yes 3 different tins .. 2 of which came from bsa themselves.. every pellet available of a decent quality.
Took to my local rfd 3 weeks ago has I was still having problems. And not happy ( not the rfd where I perchanced but where it got delivered to ) he questioned me alot sticking up for bsa as expected, the famous quote ( let me see ) like I wasnt being untruthful, he cocked it without putting a magazine in and said " yes that's going back "
Them R12s are getting near £1000, not good enough from BSA.
Are the likes over Air Arms having issues to the same level rifle ref S510r?? Ive owned the HW100KT and no issues like this.
Its a shame as BSA do make accurate rifles but this is a massive issue. My BSA Scorpion SE had mag issue's.
I was about to buy a clx pro within the next 2 weeks but will hold off now I’ve learned about this loading issue.
Reading the forums it appears to be the magazine hole size is too big allowing .177 pellets to fall out.Obviously not every rifle has this problem but it’s obviously either a design flaw or quality control issue with some of the magazines.
I see no reason why bsa can’t immediately address this issue by slightly redesigning the magazines??
I bought a Daystate Huntsman revere , so glad I did
Have a CLX for two years, no problems.
This should not be happening on a rifle of this quality, after all its not a budget rifle. I was considering updating from my R10 i think i will stick with what i have. Thanks for the tip off.
it does happen with 22 as ive found out
Is it a magazine problem or the rifle too😢
That grove ,the o-ring sites in should be deeper, basic engineering fault.
I can't understand these BSA fanboys. Can you imagine buying a brand new car and immediately having to take it apart and replace parts of the engine with after maket bits to get it to run properly and then telling everyone it was a fantastic car? This is not the first video I've watched listing BSA problems, which wouldn't be so bad if it was a £500 gun from China but for the price its disgraceful. A few years back I bought a new FAC BSA R10SE which turned out to have a sticky bolt and an inconsistent regulator. The RFD sent it back to BSA who seemed to have just pumped a load of grease around the bolt. It was no better. Got lots of on-line advice from other owners, like sending it to 3rd party whizz kids who would replace bits and tweak this and that (£££) after which I would have a marvelous rifle! Are you kidding me? It was rapidly swapped for an Air Arms S510 FAC which cost about the same at the time and which worked perfectly out of the box and through a few years of wet weather and cold winters doing pest control. At the same time I also had a new HW100 sub 12 which, like the S510, worked perfectly out of the box.
I was going to buy one of these, but after seeing this video, I definitely won’t. Are BSA going to do anything about the problem ?
Nothing ... They say they have been to the supplier of the mags to kick their arse and tighten up the spec but nothing as or yet . Local stop had a new r12 in and the mags are still the same
BSA need to sort this problem out it’s not acceptable for a gun this price to have this problem
Does the R10 th have the same problem. I was thinking of getting that second hand.
No the r10 has reg issue's
Bsa just cannot get it right. Best scrap available what it stands for save yourself the heartache and get as it arms or weihrauch
This is going back .. I've a hw100 and s400 sold my r10 before buying this
oh bollox ...my R12 order is arriving on Monday...
so far no probs!
Simple fix. Buy a weihrauch or an air arms. Had several bsa pile of crap everyone them waste of money. There customers service is next to useless. Only good bsa is one that John bowket has rebuilt.
Sure somebody clever out there could knock some new inners up with deeper O ring groove to hold em in better 🤔🤔🤔
Thx. For the warnings...horrible crap, made in China or UK ?
How do you find the accuracy on this?
Poor flyers but when it was good it's was pellet on pellet
what youve just showed me is that same with the clx altra, and i couldnt even get mag out of the gun due to pellets jamming up barrel. very poor design. wont bye another one.cheers
Yea same as all the clx ... Mine was the same
the only way to get mag out is to get soft peice of wood and pull hammer back hit it . mine came out first time , hope this helps
@@sibfishingadventuresuk1558
forgot to mention mags are made bye another company not bsa. ?
Yea not many manufacturers make there own mags all subbed out .. it's the 5 years in the making the extensive testing obviously is not true
That's bang out of order and blaming the problem on user error .that's the best they can come up with that's a terrible excuse!!!!
Got my in .22 and don't have this issue.
Its going to be german gun after reading these posts.
Can't go wrong with the German guns..
You would expect better from a UK made air rifle with the heritage that BSA had. User error, what a joke. You should just be able to buy and shoot for the next 10 years or more, with a bit of servicing. Do you know if the Ultra CLX's have the same issues as someone wants my Air Arms S510 that has been trouble free for the last eight years in part ex for one.
Just change the o rings simple as that no more problems don't get all the fuss.
Problem is .. it was £1200 plus didn't work out the box didn't work after the orings and still didn't work after bsa had it back so .. yea that's the fuss
Try better fitting pellets. I have never had a single issue after many thousands of pellets through it. I have the .177
Care to share ? As said in the video I tried loads .. and your very lucky .. there is a FB group r12 and everyone is having the same issue
@Urban Spaceman C'mon now. A rifle at this price which is supposed to be the epitome of 160+ years of BSA air rifle manufacturing better damn well have a magazine that holds and cycle ALL the standard pellets wouldn't you agree?
@@jakobiller yea absolutely totally agree
@@sibfishingadventuresuk1558 Tried dozens of pellets, never had a problem with any, the least pellet fussy rifle ever made.
Air arms on 5.52 for the 22 or 4.52 for 177
Not fit for purpose. Return for refund would be my advice.
Get some aftermarket magazines
.....carrying on watching mate.....you shouldnt be having to put anything in the fucking gun....its a bad design fault on bsa part.....hope you get some satisfaction....or at least compensation off bsa
It is a user error, why would you ever point the barrel upwards. Even level is fine.
Most of the issues came while bench shooting.. this is an hunting rifle
95% of my shooting is Hunting Crows pigeon, squirrel, which nearly always involves shooting up into trees. Unfortunately BSA Rifles are not fit for this purpose and worse still BSA have a long record of producing models with the same faults. I can only assume that the BSA management don’t really care about the quality or reliability of their products only making a quick buck ,
The fate of a lot of Uk businesses ,is management who have no interest in the product just short term profits. It will finish the company 😔one day.
Having had two bsa guns in the last three yrs will never buy another ,,nothing but niggly problems ,leaking air seals I've had 3 in last 6 months,and now the gauge is leaking
Thanks ,,, BSA are now not worth buying ,,, they almost got my money but much better brands available