Change Proteus Trace Size and Layer for Auto Router
HTML-код
- Опубликовано: 26 авг 2024
- Choosing Layers and trace size for specific nets is a critical feature in any PCB design. Proteus allows you to assign trace size and rules to individual nets or classes within your design. This will work for both the auto-router as well as the automatic trace selection. In this video, I also show how we can choose a specific layer for a net class and a handful of other tips and tricks. I hope you enjoy and I look forward to hearing your feedback and questions.
Thank you!
#Electronics
#Proteus
#PCB
#MakerSpace
#ScottCard
Checkout my webstore:
www.northshore...
proteus trace style
Proteus Trace Size
proteus layer
Proteus change trace style
Scott card
Single layer autorouting
proteus auto routing
autorouter
trace layer
auto routing in single layer proteus
Change trace size
pcb design
electronics basics
pcb layout
pcb cad software
proteus 8
pcb designing
advanced Proeus Design
advanced pcb layout
trace on one side
proteus limited to one side
pcb design software
A setting up design rules video would be very interesting. In particular I'm wondering how to prevent Proteus from auto routing power and ground traces when I already have a power and ground ground plane...
Let me know if this helps!😀
ruclips.net/video/kFsCTkKhkn0/видео.html
Great Video. Thanks for your time. hug from Argentina. Have a good day.
Thanks, glad you like it! 👍
Hi
Please make a video on how to select through hole parts
That sounds like a great idea. Have just the project for that.
Very nice tutorial.
Thank you so much!
Admin.Pls kindly make a tutorial on making gold finger pcb in proteus
Here you go, again. hehe
ruclips.net/video/kFsCTkKhkn0/видео.html
Pls upload making high voltage pcb in proteus
Hope this helps! 😎
ruclips.net/video/kFsCTkKhkn0/видео.html
How can i add a battery on the bottom side of the board?
Thank you for the question. First, import or create the footprint for the battery. If you need to make your own, this video may help: ruclips.net/video/r4WuFrLfqRc/видео.html
Next, simply mirror the part in the PCB layout (Ctrl+M). The silkscreen should now be magenta, indicating that it is on the bottom. You can double check by using the 3D viewer if it is enabled on your version.
Hope this helps 🤓
Please what is the standard thikness and can we change it ?
1.6mm is a standard for FR4. It can be changed by using the Layer Stackup found under the Technology tab.
Hope this helps!
@@ScottCard thank you
Since I don't know how to ask a generic question (outside of the specific topic of this video) I'll do it here. I had a project involving switching 230V AC on a board via SSR, load about 300-500W, depending on which parts on the output side were active at the time. I ordered the boards from Chinese manufacturer and copper there is pretty thin. I've never managed to route the same connection both on top and bottom copper (same route on both). Is it even doable? To have the same track on top and bottom copper?
Regards,
Samo
Yes, you can use a zone as a trace. Once made, coppy it and change layers so you now have it on top and bottom. You can then use the via stich to connect them. Also, if you specify 2oz copper it will help but at 2 or 3 amps this should not be an issue. Hope this helps.
@@ScottCard It does help. While I was going through your videos I was playing with this on the second monitor. I'll check it tomorrow with the Seeed guys if it works, but I may have found a very simple solution. Copy route. Move it aside. Change layer. Move it on top of the original. You get some complaints from the software, but Gerber Viewer seems happy.
How can I make ground grid in proteus
One of the options when you are creating your ground pour is the "Type". It is defaulted to Solid but you can change it to hatch, then modify the spacing. Let me know if this helps or if you would like a specific video on this!
@@ScottCard I want a video
@@ScottCard I need a video on this
@@ScottCard I will if you can make a video on the zone property dialog box and explain function of each command and it uses
OK, I will do my best. Thanks for the suggestion!
Good day Admin. Pls how can I print clone or trace circuit diagram design make new pcb circuit print in proteus
Your best bet would be to convert your image to a BMP then import it into Proteus. You may be able to change layers then or trace over it but, your NET list will not be present. Not the best tool for the job maybe.
How can I add soldermask to vias
The easiest way is to use a pas instead of a via. You can then attach it to a net. Alternatively, you can add via stitching. See this video and let us know if it helps. ruclips.net/video/t5ruPdWfC4Q/видео.html
😜
Pls how can I do soldermasking in proteus
How can I do Cutout in proteus
You can draw your cutout using the board edge layer in the 2d graphics tool.
@@ScottCard Pls can you make a video for me
Pls can you make a tutorial video on it
Sure thing. But in the meantime, you can draw it wining a mechanical layer. The board house will see this as a cut out. Otherwise, just draw the shape as board edge. A little long winded but, this may also help:
ruclips.net/video/UOFwAfBjw6g/видео.html
Hi
Please make a video on how to select through hole parts
Will do. Thanks for the suggestion 😊