100% agree but could do the same easy with a double spring seat keep it old school even a back rest would just push this bike so much farther and blow everything else out of the water
@@kevinjohnson9372 then technically what would that be mild stage 3 Tillotson are different then predator in a lot of ways 212 cc but around 8 hp out the box but the predator makes a little more torque due to its flat top piston design over Tillotson dish at some point your going to go to a flat top piston to make more compression and if you got the head of porting and polishing just as well swap it out that's kind of a double edged sword
@@heathenprojects2639 Heathen the flatop or dished has got nothing to do with the amount of torque it generates: your just repeating hearsay parrot fashion. Trev New Zealand 😇🇳🇿
Man it's such a tough decision between these n the other suspension kit u guys carry. I got a 90s sensation mike bike. I do take it off roading quite abit is to y I'm leaning towards the hydraulic kit
I believe the look is the main selling point. If you're looking for performance, the Mega Moto Front Suspension Kit is pretty smooth for how small they are.
@@fatbuddycat company out of CA made a kit for my bad dog springer seat with removable back rest I tracked the kit down threw ebay the steel is still good I'll have to make a seat and new back rest as the one on it is toast but if this bike had something to this effect it would be the best thing on the bike on the kit bike on market
I like it. But to my eyes it seems the shock and the bar should be swapped with the tube going in front of the tire instead of behind. Like I said it's an esthetic thing.
Thank you to everyone for checking out our Leading Link Suspension Kit!
I'd love to review one on my channel
Leading Links are so nice looking!
Know the only thing ya'll need rear suspension it looks great
100% agree but could do the same easy with a double spring seat keep it old school even a back rest would just push this bike so much farther and blow everything else out of the water
The front suspension design will be very good for Africa cargo and rough bumpy roads
I totally agree!
Just need a spring seat kit this will be the best kit mini bike on the market guys
I love the idea!
When it warms up again I will buy a tillotson 212 and if I like it I'll buy the stage 2 kit because I already have the stage 1 kit
I can't really tell much of a difference between stage 1 governor removed and stage 2 same bottom end few more mph top good luck and enjoy
@@heathenprojects2639 ok
@@heathenprojects2639 what if we fella fully ported and milled the head and may fiddle with the valves a bit and then do the stage 2 kit
@@kevinjohnson9372 then technically what would that be mild stage 3 Tillotson are different then predator in a lot of ways 212 cc but around 8 hp out the box but the predator makes a little more torque due to its flat top piston design over Tillotson dish at some point your going to go to a flat top piston to make more compression and if you got the head of porting and polishing just as well swap it out that's kind of a double edged sword
@@heathenprojects2639 Heathen the flatop or dished has got nothing to do with the amount of torque it generates: your just repeating hearsay parrot fashion. Trev New Zealand 😇🇳🇿
How does it perform on the trails
Looks great. Are you guys still planning to release a rear suspension kit for the mm105 frame?
Yes we are!
@@GoPowerSports were waiting
I really liked your doodlebug slam you think this suspension would also have a slam “look”
Probably not as slammed as you are used to. Still a great stance.
Man it's such a tough decision between these n the other suspension kit u guys carry. I got a 90s sensation mike bike. I do take it off roading quite abit is to y I'm leaning towards the hydraulic kit
This will fit your look better.
Why did you do a leading link vs trailing? Ive always heard trailing rides better, so I am curious if leading has some benifits.
Good video I liked it, thanks from india🎉❤😂
Glad you liked it!
I have this suspension and it’s okay but I wish I would of gone with the universal instead
is it bumpy?
I have mid 70s Alexander renalds minibike it looks like it would be great on my bike
Taylor is kinda like the mini bike Yoda 👍
Looks great! Is there any advantage of having this leading link kit instead of the front fork kit? Ride difference, suspension travel, smoother?
I believe the look is the main selling point. If you're looking for performance, the Mega Moto Front Suspension Kit is pretty smooth for how small they are.
@@GoPowerSports ok, thanks!
I had a couple questions about the kit if you could give me some measurements of it
This may work on my owasso Explorer
Will your 10” aluminum wheel with 90/65/10 tires on it fit in this leading link suspension?
Looks aside, How does it handle at high speeds? Overall do they handle better or worse than the universal kit?
Will it fit on a Coleman CC100X? Its the same as a Doodlebug db30
Yes it should
@@GoPowerSports awesome! I'll be trying one soon!
Will these fit a Coleman 196cc with a 12 in front tire ?
Will this fit on a motovox mbx10
Reminds me of the old vespa front end
It sure does
@@GoPowerSports what sure does
oh wait nevermind
@@WesleySnyder vespa front ! Hello
@@trevinskiking2165 what's up trev
Do you think it can fit on murray track 2 please let me know it thanks
Haven't tried, I bet you could make it work.
Will that work in a lil rascal?
Double all that beef.....😳
I'm saying old school double spring seat with a back rest this bike would blow ever thing else out of the water on the market
@@heathenprojects2639 Backrest!!!! 🤯 Soooo comfortable!
@@fatbuddycat company out of CA made a kit for my bad dog springer seat with removable back rest I tracked the kit down threw ebay the steel is still good I'll have to make a seat and new back rest as the one on it is toast but if this bike had something to this effect it would be the best thing on the bike on the kit bike on market
Will this fit the lil rascal ?
This will be too tall for the Lil Rascal.
What are the stock valve springs size in the tillotson?
The Tillotson 212E is around 22lb-24lb
Which front kit fit coleman cc100x
This kit would work
Can this fit a ct100u?
Yes it should
Will it fit on a Coleman ct200u?
No, it would be too small. It would fit the smaller Coleman 100s though.
Great video. Just missing a helmet for your test ride.
What size tire n rim is that?
Is this forks suspension universal 🤔?
Durn, wish it fit my BMW
How much it cost a built from you
We currently just sell parts, not full assemblies.
Dragging that all around on the metal bench is like chalk on a chalkboard.
Hahaha sorry about that
8:15 😂😂
Thats a bad rig dude
I like it. But to my eyes it seems the shock and the bar should be swapped with the tube going in front of the tire instead of behind. Like I said it's an esthetic thing.
Then it would not be a Leading Link fork