This video showed up in my feed at the perfect time. I had seen a top in the store that would have needed this exact adjustment. I didn't buy it because I wasn't sure I could tackle the alteration. But now with this video, I can buy the top. Thanks for an excellent tutorial!
Thanks for showing re-doing the under-stitching. Tailors often skip out of that in haste, and leave people wondering why their lining starts popping out after having something altered.
My sister shared your video after I’d asked her input on the exact same alteration on a dress I’d purchased. I found your video extremely informative and have no doubts about how to accomplish my alteration. I love your dress. My only question would be, “Where did you buy that? I want one!” 😂
I’m glad the video is going to help you do your alteration. I bought the dress from Boden. They are my weakness. They almost always have nice prints and I love prints
It is true that it is hard to find clothes the way you want them to fit! Good point is the largest part of your body is the size to get because you can always alter the rest! Thank you. That is beautiful dress!
I learned how to sew lining to seam allowance of the dress leaving a hole to slipstitch last. I reviewed this bit many times to get the roll and flip correctly. Saves me time and the finish result is great. Thanks.
The slipstitch really is a great stitch. I've had to open up the lining of a winter coat to repair a seam and used the slip stitch to close the hole in the lining when I was done - can't even tell.
So glad this showed up on my recommended videos. I received a dress for my niece's wedding that needs the bodice brought in and was wondering how to do it. I plan to watch the steps presented as my guide. Thank you!
Just what I was looking for-thank you! I’m taking up an unlined top with a similar style as your dress. Basically I just wanted to confirm that my plan was the right approach. I’m new to sewing but I’m already in love with being able to make my clothes fit well.
I am in love with this dress. I have absolutely no idea how to sew at all but kept watching hoping you’d share where you found it…& now I really want to learn too.
Ha! The dress is the way I lure more folks into sewing 😄 I bought the dress last summer online at Boden.com. They always have the best prints (my opinion, of course). Learning the basics of sewing isn't hard at all, and you can take it as far as you want. I recommend learning a bit just to fix things like buttons & rips and do simple alterations (hence the videos ;-) Thanks for watching and the comment, made me smile.
This is a complex procedure, let's be honest. Painstaking. One thing I do when altering a garment is put it on inside out to pin it smaller. It makes marking a new seam line much easier & I'm less likely to make one of my world class arithmetic errors LOL.
I do put it on inside out sometimes. I read somewhere to pin clothes when they are right side out so I’m trying that now. Honestly, I can’t tell a difference- not yet at least. You’re right about it being easier because less steps
I've been sewing clothing and upholstery for about 60 years. My mother taught me to always pin right side out because each side is different. True for clothing and uupholstery. Fit will always be right the first time!
I just loved this video so helpful and takes away the anxiety of making the alterations. Also your speaking voice and way of explaining…lovely The close up of the sewing amazing is as if I was standing right next to you…. Got to go I have some alterations to get to😊
Thank you. I try to be clear and concise in explaining the "how-to". Alterations - all of them- seem harder than they actually turn out to be - so, you got this!
Your videos on alterations are terrific. You cover everything. I have many clothes I love but must alter them after a 30 lb weight loss. I also need to hem lots and all this is too costly if I have someone else do it.
Thanks and I hear you on the cost. Hemming and altering take time which is why the professionals charge what they do (ok, and skill/knowledge. It takes that too) But if you have patience and perseverance (and I also like a good audiobook), you'll get through your stack of hemming projects. So hang in there. The next alteration video I'm working on is taking in a dress when it's too full in the lower half. (wish me luck 😉)
So glad I found your video. I have lost weight-hooray! Unfortunately, none of my clothes fit anymore and I do not want to buy a new wardrobe. Now I will be able to wear my favorites until I get new clothing.
Thank you for this video. I recently purchased a beautiful woven tank top on sale for $4.00 but the arm holes are too big. Your tips will help me get a great fit!
That’s a great find. If this technique isn’t what you need check out my blog post on adjustments for when the armholes are too large thedailysew.com/blog/2016/01/how-to-adjust-the-bodice-and-sleeve-pattern-when-armholes-are-too-large/
I have the same problem with some of the dresses I have. I now feel confident enough to do this alteration. Great videos and you explained in a very easy way .Thank you Polly
I hope you enjoy teaching. I think the main thing you need is just remembering what it's like to be a complete beginner well, and a knowledge of what you're going to teach ;-)
This video has given me hope for the future. I bought a zigzag machine so I can make a bandanna dress (Been sewing on my grandmother's 1929 Singer for 50 years. Love you, Gramma.) and haven't started it yet bc I've been so afraid of trying an attached lining. I've watched a lot of videos but yours is the best even though it's not the main focus. I thank you.
So many interesting things here; a bandana dress (going to google that next) and a 1929 Singer machine. Plus, figuring out your own lining pattern. That's always the fun but challenging part. I'm sure you'll have success with it.
And this method can work on other seams too if your dresses have princess seams or center front and center back - Although you don't want to throw the dress off balance by only taking in one side sometimes where you need to take in is asymmetrical. For example, a friend has a narrow rib cage and a large bust. So she takes in from the back more than from the front. So sometimes you have to tweak the rules a bit. Also, be careful not to "overfit". Pin out the excess, then sit, move, and raise your arms, all that stuff to be sure your garment lets you do that. When you like the look and can move, then sew it ;-)
My mother made me rip out and redo my home ex teacher’s work. SO many times. I have a lucrative alteration business. I tell her that I blame her!! If you do it correctly, you will never know that it is taken up. Great instructions.
I pretty much do this with every dress I buy because I'm a different numerical size in tops versus bottoms. It costs me about $40 every time and I just add it on to the cost of the dress. I recently lost a bunch of weight and now every single dress I own needs alteration. If I can master this one, it's going to save me a ton of money...
That’s smart of you to just add the cost of the tailoring to the garment when you’re planning a purchase. But, you’re right that if you did the alterations yourself you will save some money (enough to buy more clothes 😉) just don’t let other people get you to do their alterations. Keep it a secret that you know how
Second hand is a great way to shop. And knowing some simple alteration skills makes a huge difference. Actually, who am I kidding, I need alteration skills buying new clothes too. glad I could help get you started
I have a jumper that buttons in front the length of the dress. The bodice has embroidery just above the waist/bodice seam. The arm holes are now too large at bust height after my double mastectomy (w/o reconstructive surgery), however, I love this jumper still! Thank you for concisely explaining not only what & what not to do while providing rational behind your directions. There’s so many beautiful women’s clothing that would otherwise exclude small/zero breasted women from being able to wear them otherwise!! Greatly appreciate you sharing your alteration knowledge❣️👍🤗
Thanks. I have been thinking about how to alter clothing for a small/zero chest. I am wondering about taking out the side seam under the arms, and a few inches of the sleeve seam (along the length of the sleeve) then taking the bulk out there. More fabric would come out of the front than the back piece to keep the side seam on the side. But this way you don’t mess with the front closure (buttons or zipper). I have to try it but I think that’s the way to go. Thanks for the comment. Got me thinking again.
The jumper is sleeveless. The contour of the shoulder straps have a seam on top which attaches the front bodice to the back bodice straps. I’m thinking the contour of both straps needs to be cut a little more narrow on the outer edges of the strap. You gave exceptional info about the tapering down to zero at the waist seam so the pockets aren’t affected. The adjustment on a dress sleeve I would think also depends on the style of sleeve. I continue to hear many women lament about so few clothing options for small/zero bust still! What you do has made a difference for me & I sincerely appreciate you.
@@mgs783 I’m so glad you can alter your jumper. You’re right, not all styles are going to be easy to alter (if at all). And thanks- I enjoy talking about clothes 🤓
Thank you so much for this tutorial! You are a fantastic teacher and I learned so much from you. As a beginner, it would have been even more helpful to see you sew the garment on the machine (especially for the understitching part) but this was still very helpful. Thanks again!
Thank you - I'm so glad you found the video helpful and I appreciate the constructive feedback (It helps). If you still want to know, I have a video on how to understitch: ruclips.net/video/fuZHvMlaxHo/видео.htmlsi=vTckwbom65zIEFsY
Hi, I’m very grateful to you that you uploaded this alterations video. Please my problem is that whenever I stitched a pant for myself and it’s always get tight from my tummy (belly). Because of my big belly. Can you please guide me that, how should I alter my pants or how to take the correct measurements of the pant. I once again thank you for sharing your good work and your precious time. Bye for now🎉
The trick is to add extra room where you need it. Is it the front only then add to the center front seam and maybe to the side seam above the hip only on the front pattern piece. If you are nicely round you would add extra to all 4 pieces (2 backs and 2 fronts) First, find out how much extra room you need. Measure the front and back pant pattern pieces (leaving out seam allowance and darts or pleats) 3" down from the waist seam (approximately). Add the measurements together. Double this. This number is what the pants are all the way around as drafted. Now measure yourself and compare. You want the pattern to be at least your measurement plus 1 to 1 1/2 " of ease (so you can sit). Subtract the pattern measurement from your measurement plus 1-1.5" ease. This is how much you need to add to the pattern. Second, where do you need to add extra room? All over? divide the amount you need to add by 4 and add that to both front and back side seams. Or do you need it mostly in the belly area? If you need 3" or less then divide your amount by 2 and that to the front. If you need more than 3" some will be added to the front and some will be added to the back. (You can add more to the front) To add room use the slash and spread technique. Draw a line parallel to the grain line about 3" away from center front. (if there is a dart(s) on the pattern draw the line through the dart closest to the center front) cut on the line from the waist to about 1/4" above the hem. put some paper under the pattern. Spread the top of the pants open until you have the amount you need (Remember this is half if you need 3" or less) Tape the pattern down to the paper. Try to keep the grainline in its original position. I'll make a video about this soon, so keep your eyes open and thank you for the video idea ;-)
Hi, I heartily thank you for your prompt reply and appreciated that you briefed in detail. I will definitely try this time according to your instructions. My problem is only on Front part, because of the belly. I’m glad that you will be soon uploading the video. Thanks once again and God bless you, Bye for now 🇨🇦
Part of the beauty of sewing and alterations is making clothes that fit the body you have, in a way that suits how you want to wear them. Yeah... some bodies are easier to design and sew for than others, but ultimately, once you have a bodice block that fits your body and your aesthetic preferences... You're much freer from the expectations of current styles and the tyrany of being asked to fit into what's convenient for manufacturers. Your body is adequate as it is.
Good video, thanks. I don’t see the need for ripping the side seams open beforehand. Just iron them flat, mark, pin, and sew. Then use pinking shears to trim off excess. Seem reasonable?
If your taking in enough you can totally do that. And iron your new seam allowance flat after pinking the excess off. I believe on this dress I had to take it out because of where it intersected the waist seam. I couldn’t have sewn a neat seam.
I have to make minor alterations to my fiancée’s wedding dress, as it’s slightly too big in the bodice, and hiring a seamstress is out of our budget. This video has been a great help.
Being a pear shaped body-type woman, I have this problem a lot with dresses, where they fit well at the waist and hips and are large at the bust area. That’s one reason why I like to make dresses myself, in my “half one size, half another size” size. 😅
Me too. I like clothing, (a lot) so I buy pieces too but it’s so nice to have a garment that fits you how you want it to (and how it should). Some folks skip fitting when they sew and yet, here’s the perfect opportunity to get the fit right.
Sewing us becoming a specialized skill. You deserve to get paid a fair amount. No one expects a woodworker or mechanic to wirk for free. Why should a fabric worker? A young coworker wanted scrunchies. As soon as I offered to teach her how to make them, she wasn't so interested.
Is a garment worth altering (How I decide whether to embark on a project like this) Garment quality: - Are the materials going to hold up long enough that it's worth my efforts? - Does it have pockets? / Will the style/construction allow me to add pockets? (Some people can enjoy a garment without them. I can't) - Do the difficult to alter parts fit really well? (Garments with sleeves need to fit the shoulders. That's a challenging alteration. Bust cups that don't fit can be a troublesome alteration on an existing garment, but if you're working from a pattern, prioritize shoulders fitting and alter the bust. - Sewing with Nancy) - Stay tape in the shoulders/neckline, bodice linings, pattern matching, and understitched seems are details indicating better quality construction. Time/Cost: - Do I already own it? - Could a garment which fills the same niche, but actually fits me, be found? - Cost to acquire + cost of materials to alter + time to alter at your hourly rate (unless you genuinely enjoy this process and it's not taking time away from something you'd rather do) = cost of garment - Does this seem like an interesting/appealing challenge?
Yes, all great considerations. Time is something you can't make more of so you do have decided is altering something worth it? Is having a tailor alter it worth the money that you have to spend X hours to earn? And so, therefore, if you don't already own the garment, is it worth buying or even saying yes to if offered as a hand-me-over/down. I'm guessing you are someone who thinks before you act ;-) Saves a lot of everything when you do. Thanks for your comment.
@@TheDailySew Find a designer who bests suits your figure and stick with it. I'm two sizes different from top to bottom, I love dresses but primarily I buy separates.
Yes, a lot of people pin the garment to alter worn inside out. Off the top of my head I don't think there is anything wrong with this unless the garment is asymmetric in design, or you have one shoulder or hip higher than the other. Wearing a garment right side out for alterations is how I learned, so that's my default
Sure - I just have to find a dress to use as an example. It is a little tricky if you have pockets, plus opening up the waist seam (if there is one) where you are taking it in. Sort of like the bodice reduction but upside down ;-). I'm on it.
It’s going to be the reverse, basically. If you have a lining or partial lining you have to get under it and see how much seam allowance your side seam (or center front seam) has. Then you’ll undo those seams in the area you want to expand and re-sew them with a narrower seam allowance. To know how much you need to add, measure your body, then measure the dress. You want the dress to be an inch or 2 more than your body so it isn’t skin tight and you can move in it. If I need to add 2 inches, and I have 2 side seams I need to get an inch out of each seam. So I’ll try to move the seam over 1/2” into what’s currently the seam allowance. 1/2” x2 is 1”. If you don’t have enough seam allowance to extend enough you may be able to add a little fabric under the arm. So much easier if the dress is sleeveless. I hope this is helpful and thanks for the video idea 💡
Clothes off the rack that are sleevless and too big in the underarm area is actually a pattern made to have sleeves. Not intended to be sleeveless. Cheap manufacturing
A sleeve can be taking in slightly at the seam that goes from under the arm to the bottom of the sleeve. Use the same method of pinning out the excess and then measuring how much and where your start and end points are. Some sleeve styles are just puffy. That fullness comes from the sleeve cap (top of sleeve) and you can’t make it a skinny sleeve by just tapering in the sleeve seam. So pin out the bagginess and see if makes much difference. You’ll know then if you can taper that particular style sleeve.
yes, this can be done. It might be a little tricky for me to explain only with words but here goes: Pin out the excess on both sides as in the video except you are not pinching evenly from front and back. You're just pinching out excess where it is. When you're done look in the mirror with a critical eye for the fit. Does either side look better than the other? (if you prefer one to the other you can just measure the favorited side (the next few steps) and use those measurements for both sides - unless you are noticeably asymmetrical then ignore that and measure both sides) Leave the pins in and take off the dress. Have a good look then measure what you pinched out. Notice how far down from the underarm seam you started to pinch out the side seam. Write this down. Where did you pinched out the most fabric? Write this down. How far down the side seam did you stop pinching out excess fabric? Write that down. Then measure the other side and compare. You can blend these reference points together. Example: The right side starts 1" down from the underarm seam. The left side starts 3/4" down. You could split the difference and start them both at 7/8" down or pick one to use for both sides. Same for where you pinched out the most and where you stopped. Then measure how much you pinched out at the place you pinched out the most. For example: You may see you pinched out 1/8 from the front and 3/4 of the back on the right side and on the left you pinched out only 1/2" of the back and a minuscule amount from the front. (You'll know from the side seam what you pinched from the back and front) Unless you know you are noticeably asymmetric (one high hip, curving spine, dropped shoulder) add the amounts you took out from the back together. So 3/4" + 1/2" = 1,1/4". Ignore the tiny amounts from the front because, as you said, the front fits as it is. Divide that total in 2 1,1/4" /2 = 5/8" You will unpick the side seams where you pinned and a little beyond. Then repin the seams following your notes. You'll be shifting in the back pieces so it will not line up with the edge of the front piece. Using the example above; at the point you started pinching out the back the edge of the front and back will match. Then you will measure down to where you pinched out the most. There you will move the back piece in so that it sticks out 5/8" from the edge of the front. Where you stopped pinching, the edges will again line up. Now you need to pin the back to the front (where it's open) so it smoothly goes from 0 to the deepest point to 0 again. If the total length of all of this is over 7", or if you feel more comfortable with more info, You could have another point down from the underarm seam as a reference for how much you took out of the back piece. whew, I hope that makes sense. I'll add this to the blog post that accompanies this video (link in the description) and there I will add pictures/drawings and more detail. Thanks for the question. It's helpful to others as well.
This will be so helpful, thank you! Also, I’m a new subscriber and somewhat new to sewing, if I could ask, what’s the most that a person could resize a dress, like it is possible to alter a size 8 dress to a 4, or 0? 🤔 There are no fitted waists on any of these dresses, just seems down the sides, and zippers on the back. Also, they are all unlined, and made of that popular scuba style material, (Calvin Klein/DKNY/Kasper). Thanks so much in advance! 🙏🏼🤍🙏🏼
Thanks for subscribing 💛 A center back zipper will definitely make it easier to take in everything at the sides. However, there might be a problem above the underarm seam when you resize the dress drastically. And that is above the side seam the dress could be too big. A sleeveless dress may not show the excess as much as a dress with a sleeve and shoulder seam. Pin in the sides of the dress and check how the upper bodice looks, not just how the body of the dress looks.
hello I ask request very nicely respectfully please kindly film your solution how to stop the runaway sewing machine electric foot pedal and demonstrate it actually being used to sew please kindly consider this video request please OK,?thank you very much
Let me try some different ways to stop the foot from sliding away and then I will make the video. This is a good topic for a video. Thanks for the suggestion
I wish I could but it’s no longer made. It is a Boden dress from 2022. Maybe you can find it on Poshmark? Or check out Boden.com they usually have great prints and colors and this style comes out almost every spring.
This is trickier - because of the zipper. When you remove excess width from the side seams you do have to take an equal amount out from each side. On the side with the zipper, you'll have to unpick the zipper but maybe not the entire zipper, just where you are taking in the dress. And then you can trim down the bodice front & back where the zipper was and sew the zipper back in. Example: You need to remove 2 inches from the bust area but 6" below the bust the dress fits - nothing needs to be changed. I take out 1" from the right side seam and 1" from the left side seam. The right side is done like the video above but the left side has a zipper. I have to unpick / take out the first 7" of the zipper. I have to trim the left edge (where the zipper was attached) of the front & back bodice pieces, 1/2" each at the top and blending to trimming 0" at 6" down. Cut off the 1/2" to 0" then, using the same seam allowance as the dress originally used, sew the zipper back in.
Just found your channel. ❤. Could you possibly help myself and others with unusual concern. Serger seams itch. What is your recommendation for redoing retail blouse seams OR covering them? AND sewing blouse seams with NO serger seams. I thought of French seams, lined OR sewing seams and turning each side under 2x. I have not tried yet. IF Anyone else has same problem please comment. I need support. JOY
This is a great and interesting question. My first thought is not to bother taking out a serged seam to re-sew it. I would cover the seam allowance with a soft strip of fabric. If it's knit fabric you could simply fold it over the seam allowance - the serged stitches - and sew it down to the seam allowance close to the seam, catching both layers of the strip as you sew. If you cut a strip to cover the serged stitches out of a woven fabric, cut it double the width you need so you can turn under the raw edges. Like bias binding, which you could make or buy already made at places like Walmart and Joanns. If I were making the garment, or remaking it (altering it) I would definitely use French seams - especially the side seams of the shirt and the sleeve seams. Well, I say that, but sometimes I sew a straight seam, press it open, and leave it. Depends on the fabric. A French seam with a heavy or bulky fabric is not always pleasant, and a fabric that is prone to fraying needs a French seam. You could also try what used to be called a Hong Kong finish. It's when you bind the two raw edges of the seam allowance individually with binding. You'll see it used in unlined jackets. You're idea of folding each seam allowance under itself and then sewing is good, but if you fold them together, as one, (Like a French seam but not sewn wrong sides together) you'll only have to make one pass under the machine per seam instead of two. Thanks for this question.
For me to do this would be the same thing as making Princess Diana's wedding gown. This is wayyyy too hard. Off to the alterations shop it goes. I'm glad I watched this, and I recognize your skill, but this is why I hate sewing (and cooking.)
you want to take a size 3x dress down to a size 2x dress? You would take in both side seams slightly as shown in the video. You have the option of taking the dress in all the way down the side seams or stopping above any pockets.
You are not the only one. (I really need to figure this out so I can tell everyone) In principle, the way to reduce fabric is by making a dart, tuck, pleat or gathers, depending on where you're reducing (the side seam, the waist seam or the shoulder seam) . Maybe you could give me some more info on what exactly you're trying to do and that would give me a place to start my research. For example; the style of the dress now, does it have darts? what kind of darts, sleeves? neckline type, how you want the dress to look when you're done altering it and any other details. Thanks
@@TheDailySew it’s a skater dress, it has a v with a zip at the back, sleeveless and all the pieces are full length from top to hem. The front is a slash neckline and the problem I have is the middle top is shaped for a bust, I tried putting a dart either side but it looks odd. It’s a lovely fit everywhere else and I don’t really want to have to take it apart, I’m looking for a quick fix. I’m not able to sew much now after I had a stroke, so the simpler, the better. Thank you.
it's a little bit of a pain to have to alter your clothes after spending to buy them but it's more of a pain having nothing that fits right. So I have to get over it and make the alterations ;-)
I would try to take it in at center back, yes. First, pinch out the excess in the back with clips or pins. Anything temporary. Then see how the garment looks. Check that the side seams aren’t pulled too much too the back. If everything looks good and the garment still falls as it should (not swinging to the back) then, yes, you can take out the extra width at the center back seam. Hooray!
Actually, that is a chalk marker I use. The chalk line just dissapers but you can "brush" it off with a dry wash cloth. (Clover makes the marker. It's called Chacoliner and they come in a lot of colors. I use them all the time and really like them)
Ha! Knowing where you can save time is very helpful. I have a friend who alters patterns and clothing by eye. She swears humans can judge distances better than they realize. Granted she works with her hands all day, measuring. She's a bookbinder so she has a trained eye. But still, she's correct when it comes to some people, and maybe all of us.
You are an AMAZING TEACHER!!!! Thank you sooo much! Few people teach how to alter ready-to-wear clothing!
Ah, shucks. Thank you. I hope it helps anyone who needs to do this adjustment.
Absolutely the best demonstration using the burrito method. I loved the written concise directions on marking the alteration. Thank you!
Thank you very much!
Wonderful video. I'm pear shape and need to learn how to alter almost everything. You are so concise and understandable. Great teacher!
Thank you so much. I think most of us need to alter ready-to-wear. We just try to avoid it 😆
This video showed up in my feed at the perfect time. I had seen a top in the store that would have needed this exact adjustment. I didn't buy it because I wasn't sure I could tackle the alteration. But now with this video, I can buy the top. Thanks for an excellent tutorial!
This is what I love to hear. Thank you. If you have any questions while altering the top just pop them in here.
Thanks for showing re-doing the under-stitching. Tailors often skip out of that in haste, and leave people wondering why their lining starts popping out after having something altered.
Oh, I didn’t realize that- I’m glad I put that in too then. It’s those little (and not so little) steps that can make a difference.
This was amazing! You are a rare & gifted seamstress! Thank you for sharing your talent! The dress is gorgeous! ❤
thank you, very much
My sister shared your video after I’d asked her input on the exact same alteration on a dress I’d purchased. I found your video extremely informative and have no doubts about how to accomplish my alteration. I love your dress. My only question would be, “Where did you buy that? I want one!” 😂
I’m glad the video is going to help you do your alteration. I bought the dress from Boden. They are my weakness. They almost always have nice prints and I love prints
It is true that it is hard to find clothes the way you want them to fit! Good point is the largest part of your body is the size to get because you can always alter the rest! Thank you. That is beautiful dress!
I learned how to sew lining to seam allowance of the dress leaving a hole to slipstitch last. I reviewed this bit many times to get the roll and flip correctly. Saves me time and the finish result is great. Thanks.
The slipstitch really is a great stitch. I've had to open up the lining of a winter coat to repair a seam and used the slip stitch to close the hole in the lining when I was done - can't even tell.
So glad this showed up on my recommended videos. I received a dress for my niece's wedding that needs the bodice brought in and was wondering how to do it. I plan to watch the steps presented as my guide. Thank you!
I hope it helps you get a great fit. If you have any questions as you go along just pop them in here.
Thank you for sharing this skill. I have always wanted to know how to do this!
thanks for watching the video
Just what I was looking for-thank you! I’m taking up an unlined top with a similar style as your dress. Basically I just wanted to confirm that my plan was the right approach. I’m new to sewing but I’m already in love with being able to make my clothes fit well.
yes, it's the best thing about sewing - making clothes that fit (or look) how You want them to.
Especially if one is asymmetrical.@@TheDailySew
The burrito method is super helpful! Thanks for this video.
The burrito method is helpful. You’ll use it a lot with sleeveless garments
Prior to cutting the excess fabric, I would try the garment on again to make sure I had the proper fit.
Yes. Thank you. It could save a lot of heartache if you did this. Sorry I left that out. Oops 😬
You sound like me. I don’t cut anything without re-trying it on just to be certain & abiding by trying on twice cutting once rule of thumb.
Your detailed description was very understandable.
I sew a bit but this was exactly what I needed ❤
that's great to hear. Thanks
Great info and directions for a complex but basically simply easily. Good job. Just what I needed for garment reconstruction.
Great to hear, thanks. I like looking how ready to wear is constructed. Not always the same as sewing patterns instruct.
I am in love with this dress. I have absolutely no idea how to sew at all but kept watching hoping you’d share where you found it…& now I really want to learn too.
Ha! The dress is the way I lure more folks into sewing 😄 I bought the dress last summer online at Boden.com. They always have the best prints (my opinion, of course). Learning the basics of sewing isn't hard at all, and you can take it as far as you want. I recommend learning a bit just to fix things like buttons & rips and do simple alterations (hence the videos ;-) Thanks for watching and the comment, made me smile.
Thank you so much! It's exactly what I'm altering for another woman!
I'm happy the video is helpful.
This is a complex procedure, let's be honest. Painstaking. One thing I do when altering a garment is put it on inside out to pin it smaller. It makes marking a new seam line much easier & I'm less likely to make one of my world class arithmetic errors LOL.
I do put it on inside out sometimes. I read somewhere to pin clothes when they are right side out so I’m trying that now. Honestly, I can’t tell a difference- not yet at least. You’re right about it being easier because less steps
I do the same great time saver
I thought of the inside out thing, but one breast is much larger so it would be wonky on me.
I've been sewing clothing and upholstery for about 60 years. My mother taught me to always pin right side out because each side is different. True for clothing and uupholstery. Fit will always be right the first time!
I think alterations are complicated, I won't attempt...😮
Thank you for this clear tutorial, I was able to take in a lined dress and it doesn’t gape under the arms anymore, yay!
Yay!
The burrito method is a great ideat!! Thank you 🙂
It’s used in for constructing a few garments. Sleeveless garments in particular. But also garments with shoulder yokes. It looks trickier than it is.
Great video! I learned a lot! I appreciate the narration supporting the visuals. Well done!
Thanks. I appreciate your feedback. I’m a visual learner so I really try to show the steps. But the language is important too.
I just loved this video so helpful and takes away the anxiety of making the alterations. Also your speaking voice and way of explaining…lovely
The close up of the sewing amazing is as if I was standing right next to you….
Got to go I have some alterations to get to😊
Thank you. I try to be clear and concise in explaining the "how-to". Alterations - all of them- seem harder than they actually turn out to be - so, you got this!
That really is a beautiful dress! Thank you for the video!
Your videos on alterations are terrific. You cover everything. I have many clothes I love but must alter them after a 30 lb weight loss. I also need to hem lots and all this is too costly if I have someone else do it.
Thanks and I hear you on the cost. Hemming and altering take time which is why the professionals charge what they do (ok, and skill/knowledge. It takes that too) But if you have patience and perseverance (and I also like a good audiobook), you'll get through your stack of hemming projects. So hang in there. The next alteration video I'm working on is taking in a dress when it's too full in the lower half. (wish me luck 😉)
So glad I found your video. I have lost weight-hooray! Unfortunately, none of my clothes fit anymore and I do not want to buy a new wardrobe. Now I will be able to wear my favorites until I get new clothing.
@@laurajones338 yes! I really like when we can get more wear out of our clothes - especially our favorite clothes
Beautiful summer dress ☀️
Thank you
Thank you for this video. I recently purchased a beautiful woven tank top on sale for $4.00 but the arm holes are too big. Your tips will help me get a great fit!
That’s a great find. If this technique isn’t what you need check out my blog post on adjustments for when the armholes are too large thedailysew.com/blog/2016/01/how-to-adjust-the-bodice-and-sleeve-pattern-when-armholes-are-too-large/
I have the same problem with some of the dresses I have. I now feel confident enough to do this alteration. Great videos and you explained in a very easy way .Thank you Polly
Thank you for watching. It’s really nice having your clothes fit you like you want them to. Now you can. 😉
That’s a pretty spendy dress to have to alter. $160!
@@babadeedee214 I hear you! But that’s the shape of my body. I have to alter most dresses if I want them to fit right.
Nice! My trick is to put the item on inside out...easier to pin where you're going to sew and the seams are already inside the garment
Yes, sometimes I do it inside out too.
awesome! thank you so much. it's wonderful to be able to alter your clothes to look your best! love it. 🩷
Thanks!
Thanks. I am considering teaching some basic alterations. This gives me an idea of what it might entail.
I hope you enjoy teaching. I think the main thing you need is just remembering what it's like to be a complete beginner well, and a knowledge of what you're going to teach ;-)
This video has given me hope for the future. I bought a zigzag machine so I can make a bandanna dress (Been sewing on my grandmother's 1929 Singer for 50 years. Love you, Gramma.) and haven't started it yet bc I've been so afraid of trying an attached lining. I've watched a lot of videos but yours is the best even though it's not the main focus. I thank you.
So many interesting things here; a bandana dress (going to google that next) and a 1929 Singer machine. Plus, figuring out your own lining pattern. That's always the fun but challenging part. I'm sure you'll have success with it.
T y, I'm about to give it a try. Got the bandannas out yesterday.@@TheDailySew
Oh, this was so informative and easy to understand. Thank you!
Thank you!
So happy to have found your channel and this video! I need to do the exact same thing to a dress. Thank you!😊
Thanks, I’m glad I could help you fix your dress. Let me know if you have any questions along the way
Finally managed to lose 55 pounds and now find some of my most favorite dresses look silly on me now. Thank you for posting this
And this method can work on other seams too if your dresses have princess seams or center front and center back - Although you don't want to throw the dress off balance by only taking in one side sometimes where you need to take in is asymmetrical. For example, a friend has a narrow rib cage and a large bust. So she takes in from the back more than from the front. So sometimes you have to tweak the rules a bit. Also, be careful not to "overfit". Pin out the excess, then sit, move, and raise your arms, all that stuff to be sure your garment lets you do that. When you like the look and can move, then sew it ;-)
Congratulations on the weight loss!
My mother made me rip out and redo my home ex teacher’s work. SO many times. I have a lucrative alteration business. I tell her that I blame her!! If you do it correctly, you will never know that it is taken up. Great instructions.
thank you very much. Alterations is a skill - much more to it than people realize.
This is so helpful! Thank you!
thank you
I pretty much do this with every dress I buy because I'm a different numerical size in tops versus bottoms. It costs me about $40 every time and I just add it on to the cost of the dress. I recently lost a bunch of weight and now every single dress I own needs alteration. If I can master this one, it's going to save me a ton of money...
That’s smart of you to just add the cost of the tailoring to the garment when you’re planning a purchase. But, you’re right that if you did the alterations yourself you will save some money (enough to buy more clothes 😉) just don’t let other people get you to do their alterations. Keep it a secret that you know how
Perfect, I am altering a nice jumpsuit.
thanks. I hope this helps you get a good fit
Love the video, love even more dresses like yours and with pockets 🎉🎉🎉❤❤❤
Thanks - everything needs a pocket ;-)
Thank you for the clear video!
thank you for watching
Love this video. Can’t wait to try. Thank you.
thank you
Hi. Thank you. Cute dress.
Excellent tutorial. Thank you so much! You just got a new subscriber.
thank you very much!
Just found you today! Appreciate your tutorials, easy to follow.
Thanks - I do try to make them organized & to the point. Sometimes I do a better job than others ;-)
Ive got a dress that is the same style and I bought it too large 2 nd hand but got confused on how to start, thank you so much!😊
Second hand is a great way to shop. And knowing some simple alteration skills makes a huge difference. Actually, who am I kidding, I need alteration skills buying new clothes too. glad I could help get you started
Beautiful dress
thanks
I love that dress....
thanks
Informative, great video! You are a great teacher.
thank you
Absolutely
Great tip …thank you i need to alter most garments
Thank you. Most of us need to alter our garments. You are not alone
Awesome video - thank you for your help!!
Yay! Thanks for watching
Thank you Fab tutorial
thank you
Thanks this is what I needed
Yay - that's great to hear - thanks for watching
Thank you so much for this great tutorial! Beautiful dress!
thank you
I have a jumper that buttons in front the length of the dress. The bodice has embroidery just above the waist/bodice seam. The arm holes are now too large at bust height after my double mastectomy (w/o reconstructive surgery), however, I love this jumper still! Thank you for concisely explaining not only what & what not to do while providing rational behind your directions. There’s so many beautiful women’s clothing that would otherwise exclude small/zero breasted women from being able to wear them otherwise!! Greatly appreciate you sharing your alteration knowledge❣️👍🤗
Thanks. I have been thinking about how to alter clothing for a small/zero chest. I am wondering about taking out the side seam under the arms, and a few inches of the sleeve seam (along the length of the sleeve) then taking the bulk out there. More fabric would come out of the front than the back piece to keep the side seam on the side. But this way you don’t mess with the front closure (buttons or zipper). I have to try it but I think that’s the way to go. Thanks for the comment. Got me thinking again.
The jumper is sleeveless. The contour of the shoulder straps have a seam on top which attaches the front bodice to the back bodice straps. I’m thinking the contour of both straps needs to be cut a little more narrow on the outer edges of the strap. You gave exceptional info about the tapering down to zero at the waist seam so the pockets aren’t affected.
The adjustment on a dress sleeve I would think also depends on the style of sleeve.
I continue to hear many women lament about so few clothing options for small/zero bust still! What you do has made a difference for me & I sincerely appreciate you.
@@mgs783 I’m so glad you can alter your jumper. You’re right, not all styles are going to be easy to alter (if at all). And thanks- I enjoy talking about clothes 🤓
This is an alteration for a more experienced not professional but experienced with the needle !
Yes, it is or for someone who is fearless 😉. But it’s all straight stitching. It probably takes more patience than sewing skills
Thank you so much for this tutorial! You are a fantastic teacher and I learned so much from you. As a beginner, it would have been even more helpful to see you sew the garment on the machine (especially for the understitching part) but this was still very helpful. Thanks again!
Thank you - I'm so glad you found the video helpful and I appreciate the constructive feedback (It helps). If you still want to know, I have a video on how to understitch: ruclips.net/video/fuZHvMlaxHo/видео.htmlsi=vTckwbom65zIEFsY
Beautiful dress on you.
Thank you
Thank you so much for this tutorial. I am petite and even if I buy a size XS , it is still big for me. Now I. am confident to do ut myself.
You totally can do this yourself 😊
Good job
thank you
this was helpful, thank you
Thanks
Thank you, very helpful!
Hi, I’m very grateful to you that you uploaded this alterations video. Please my problem is that whenever I stitched a pant for myself and it’s always get tight from my tummy (belly). Because of my big belly. Can you please guide me that, how should I alter my pants or how to take the correct measurements of the pant. I once again thank you for sharing your good work and your precious time. Bye for now🎉
The trick is to add extra room where you need it. Is it the front only then add to the center front seam and maybe to the side seam above the hip only on the front pattern piece. If you are nicely round you would add extra to all 4 pieces (2 backs and 2 fronts)
First, find out how much extra room you need. Measure the front and back pant pattern pieces (leaving out seam allowance and darts or pleats) 3" down from the waist seam (approximately). Add the measurements together. Double this. This number is what the pants are all the way around as drafted. Now measure yourself and compare. You want the pattern to be at least your measurement plus 1 to 1 1/2 " of ease (so you can sit). Subtract the pattern measurement from your measurement plus 1-1.5" ease. This is how much you need to add to the pattern.
Second, where do you need to add extra room? All over? divide the amount you need to add by 4 and add that to both front and back side seams.
Or do you need it mostly in the belly area? If you need 3" or less then divide your amount by 2 and that to the front. If you need more than 3" some will be added to the front and some will be added to the back. (You can add more to the front)
To add room use the slash and spread technique. Draw a line parallel to the grain line about 3" away from center front. (if there is a dart(s) on the pattern draw the line through the dart closest to the center front) cut on the line from the waist to about 1/4" above the hem. put some paper under the pattern. Spread the top of the pants open until you have the amount you need (Remember this is half if you need 3" or less) Tape the pattern down to the paper. Try to keep the grainline in its original position.
I'll make a video about this soon, so keep your eyes open and thank you for the video idea ;-)
Hi, I heartily thank you for your prompt reply and appreciated that you briefed in detail. I will definitely try this time according to your instructions. My problem is only on Front part, because of the belly. I’m glad that you will be soon uploading the video. Thanks once again and God bless you, Bye for now 🇨🇦
Great job . Thank you… I wish I had your figure 🤓🤓🤓🤓
Ha! Genetics (and a chronic health issue)
Part of the beauty of sewing and alterations is making clothes that fit the body you have, in a way that suits how you want to wear them. Yeah... some bodies are easier to design and sew for than others, but ultimately, once you have a bodice block that fits your body and your aesthetic preferences... You're much freer from the expectations of current styles and the tyrany of being asked to fit into what's convenient for manufacturers.
Your body is adequate as it is.
@@lynn858 100% totally agree. I really like how you said it as well.
Thank You!
Great job.
Thanks
Great video! Liked and subscribed.
🤗 thanks so much
I hope you washed the dress before altering, to allow for shrinkage.
Yes, Washed and lined dried because that's how I launder it. An excellent point that I should have mentioned.
Good video, thanks. I don’t see the need for ripping the side seams open beforehand. Just iron them flat, mark, pin, and sew. Then use pinking shears to trim off excess. Seem reasonable?
If your taking in enough you can totally do that. And iron your new seam allowance flat after pinking the excess off.
I believe on this dress I had to take it out because of where it intersected the waist seam. I couldn’t have sewn a neat seam.
Great video
thanks
Thank you!
I followed this until the burrito part, but it was still very helpful, thank you
Glad you found it (any of it) helpful.
I have to make minor alterations to my fiancée’s wedding dress, as it’s slightly too big in the bodice, and hiring a seamstress is out of our budget. This video has been a great help.
I’m really happy that it was. Thanks for letting me know and congratulations 🎉
the burrito technique 🤩
It’s very handy. 😁
Being a pear shaped body-type woman, I have this problem a lot with dresses, where they fit well at the waist and hips and are large at the bust area. That’s one reason why I like to make dresses myself, in my “half one size, half another size” size. 😅
Me too. I like clothing, (a lot) so I buy pieces too but it’s so nice to have a garment that fits you how you want it to (and how it should). Some folks skip fitting when they sew and yet, here’s the perfect opportunity to get the fit right.
And this is why I get so annoyed with people who don’t want to pay a fair price for clothing alterations if they can’t do it themselves!
right. It takes a lot of time. And you have to know what you're doing.
Not everyone is privileged enough to pay some one hun. U born from Sa silver spoon and judge everyone 😅
Sewing us becoming a specialized skill. You deserve to get paid a fair amount. No one expects a woodworker or mechanic to wirk for free. Why should a fabric worker?
A young coworker wanted scrunchies. As soon as I offered to teach her how to make them, she wasn't so interested.
Is a garment worth altering
(How I decide whether to embark on a project like this)
Garment quality:
- Are the materials going to hold up long enough that it's worth my efforts?
- Does it have pockets? / Will the style/construction allow me to add pockets? (Some people can enjoy a garment without them. I can't)
- Do the difficult to alter parts fit really well? (Garments with sleeves need to fit the shoulders. That's a challenging alteration. Bust cups that don't fit can be a troublesome alteration on an existing garment, but if you're working from a pattern, prioritize shoulders fitting and alter the bust. - Sewing with Nancy)
- Stay tape in the shoulders/neckline, bodice linings, pattern matching, and understitched seems are details indicating better quality construction.
Time/Cost:
- Do I already own it?
- Could a garment which fills the same niche, but actually fits me, be found?
- Cost to acquire + cost of materials to alter + time to alter at your hourly rate (unless you genuinely enjoy this process and it's not taking time away from something you'd rather do) = cost of garment
- Does this seem like an interesting/appealing challenge?
Yes, all great considerations. Time is something you can't make more of so you do have decided is altering something worth it? Is having a tailor alter it worth the money that you have to spend X hours to earn? And so, therefore, if you don't already own the garment, is it worth buying or even saying yes to if offered as a hand-me-over/down.
I'm guessing you are someone who thinks before you act ;-) Saves a lot of everything when you do. Thanks for your comment.
@@TheDailySew Find a designer who bests suits your figure and stick with it. I'm two sizes different from top to bottom, I love dresses but primarily I buy separates.
@@gw22 yes. I know which brands of pants fit me best and it's not the same as which brands of dresses fit me best.
🙄
Thank you for the instructions. Can you tell me where you ordered this dress? It is very pretty.
I ordered it through Boden in spring 2022 so if they still have it it will be in their sale section (which is even better).
When I alter a garment especially underarm areas I try on dress and pin inside out.
Yes, a lot of people pin the garment to alter worn inside out. Off the top of my head I don't think there is anything wrong with this unless the garment is asymmetric in design, or you have one shoulder or hip higher than the other. Wearing a garment right side out for alterations is how I learned, so that's my default
@@TheDailySew it turned out really nice
Please show a video on how to do the lower half of a dress when there's too much volume?
Sure - I just have to find a dress to use as an example. It is a little tricky if you have pockets, plus opening up the waist seam (if there is one) where you are taking it in. Sort of like the bodice reduction but upside down ;-). I'm on it.
I'd like to know how to extend a dress around the bust area
It’s going to be the reverse, basically. If you have a lining or partial lining you have to get under it and see how much seam allowance your side seam (or center front seam) has. Then you’ll undo those seams in the area you want to expand and re-sew them with a narrower seam allowance. To know how much you need to add, measure your body, then measure the dress. You want the dress to be an inch or 2 more than your body so it isn’t skin tight and you can move in it. If I need to add 2 inches, and I have 2 side seams I need to get an inch out of each seam. So I’ll try to move the seam over 1/2” into what’s currently the seam allowance. 1/2” x2 is 1”. If you don’t have enough seam allowance to extend enough you may be able to add a little fabric under the arm. So much easier if the dress is sleeveless. I hope this is helpful and thanks for the video idea 💡
Clothes off the rack that are sleevless and too big in the underarm area is actually a pattern made to have sleeves. Not intended to be sleeveless. Cheap manufacturing
that's interesting and makes sense. A cost-saving shortcut 😡
I'd like to know how to make the sleeve more tapered cause its really baggie.
A sleeve can be taking in slightly at the seam that goes from under the arm to the bottom of the sleeve.
Use the same method of pinning out the excess and then measuring how much and where your start and end points are.
Some sleeve styles are just puffy. That fullness comes from the sleeve cap (top of sleeve) and you can’t make it a skinny sleeve by just tapering in the sleeve seam. So pin out the bagginess and see if makes much difference. You’ll know then if you can taper that particular style sleeve.
Thank you. My dress. Is only too large (wide) on the back from armhole to waist is this something you can help me with please?
yes, this can be done. It might be a little tricky for me to explain only with words but here goes:
Pin out the excess on both sides as in the video except you are not pinching evenly from front and back. You're just pinching out excess where it is. When you're done look in the mirror with a critical eye for the fit. Does either side look better than the other? (if you prefer one to the other you can just measure the favorited side (the next few steps) and use those measurements for both sides - unless you are noticeably asymmetrical then ignore that and measure both sides)
Leave the pins in and take off the dress. Have a good look then measure what you pinched out. Notice how far down from the underarm seam you started to pinch out the side seam. Write this down. Where did you pinched out the most fabric? Write this down. How far down the side seam did you stop pinching out excess fabric? Write that down. Then measure the other side and compare. You can blend these reference points together.
Example: The right side starts 1" down from the underarm seam. The left side starts 3/4" down. You could split the difference and start them both at 7/8" down or pick one to use for both sides. Same for where you pinched out the most and where you stopped.
Then measure how much you pinched out at the place you pinched out the most. For example: You may see you pinched out 1/8 from the front and 3/4 of the back on the right side and on the left you pinched out only 1/2" of the back and a minuscule amount from the front. (You'll know from the side seam what you pinched from the back and front)
Unless you know you are noticeably asymmetric (one high hip, curving spine, dropped shoulder) add the amounts you took out from the back together. So 3/4" + 1/2" = 1,1/4". Ignore the tiny amounts from the front because, as you said, the front fits as it is. Divide that total in 2 1,1/4" /2 = 5/8"
You will unpick the side seams where you pinned and a little beyond. Then repin the seams following your notes. You'll be shifting in the back pieces so it will not line up with the edge of the front piece. Using the example above; at the point you started pinching out the back the edge of the front and back will match. Then you will measure down to where you pinched out the most. There you will move the back piece in so that it sticks out 5/8" from the edge of the front. Where you stopped pinching, the edges will again line up.
Now you need to pin the back to the front (where it's open) so it smoothly goes from 0 to the deepest point to 0 again. If the total length of all of this is over 7", or if you feel more comfortable with more info, You could have another point down from the underarm seam as a reference for how much you took out of the back piece.
whew, I hope that makes sense. I'll add this to the blog post that accompanies this video (link in the description) and there I will add pictures/drawings and more detail.
Thanks for the question. It's helpful to others as well.
I find it easier to wear the garment inside out for marking. I also use safety pins to mark because I have poked myself! Thanks for the video!
Safety Pins are definitely the smart way to mark for a fitting.
This will be so helpful, thank you! Also, I’m a new subscriber and somewhat new to sewing, if I could ask, what’s the most that a person could resize a dress, like it is possible to alter a size 8 dress to a 4, or 0? 🤔 There are no fitted waists on any of these dresses, just seems down the sides, and zippers on the back. Also, they are all unlined, and made of that popular scuba style material, (Calvin Klein/DKNY/Kasper). Thanks so much in advance! 🙏🏼🤍🙏🏼
Thanks for subscribing 💛 A center back zipper will definitely make it easier to take in everything at the sides. However, there might be a problem above the underarm seam when you resize the dress drastically. And that is above the side seam the dress could be too big. A sleeveless dress may not show the excess as much as a dress with a sleeve and shoulder seam. Pin in the sides of the dress and check how the upper bodice looks, not just how the body of the dress looks.
Thanks so much for your reply, I appreciate it very much! 💖 @@TheDailySew
hello I ask request very nicely respectfully please kindly film your solution how to stop the runaway sewing machine electric foot pedal and demonstrate it actually being used to sew please kindly consider this video request please OK,?thank you very much
Let me try some different ways to stop the foot from sliding away and then I will make the video. This is a good topic for a video. Thanks for the suggestion
I glued pieces of a rubber mousepad to the bottom of mine. Solved.
I love the dress. Whose the maker?
Boden made the dress. Their clothing is always well made and they usually have fun prints.
Can you provide the link for this pretty dress?
I wish I could but it’s no longer made. It is a Boden dress from 2022. Maybe you can find it on Poshmark? Or check out Boden.com they usually have great prints and colors and this style comes out almost every spring.
I want to downsize the dress that has zip at one side under arm.. how to get done equally?
This is trickier - because of the zipper. When you remove excess width from the side seams you do have to take an equal amount out from each side. On the side with the zipper, you'll have to unpick the zipper but maybe not the entire zipper, just where you are taking in the dress. And then you can trim down the bodice front & back where the zipper was and sew the zipper back in. Example: You need to remove 2 inches from the bust area but 6" below the bust the dress fits - nothing needs to be changed. I take out 1" from the right side seam and 1" from the left side seam. The right side is done like the video above but the left side has a zipper. I have to unpick / take out the first 7" of the zipper. I have to trim the left edge (where the zipper was attached) of the front & back bodice pieces, 1/2" each at the top and blending to trimming 0" at 6" down. Cut off the 1/2" to 0" then, using the same seam allowance as the dress originally used, sew the zipper back in.
Just found your channel. ❤. Could you possibly help myself and others with unusual concern. Serger seams itch. What is your recommendation for redoing retail blouse seams OR covering them? AND sewing blouse seams with NO serger seams. I thought of French seams, lined OR sewing seams and turning each side under 2x. I have not tried yet. IF Anyone else has same problem please comment. I need support. JOY
This is a great and interesting question. My first thought is not to bother taking out a serged seam to re-sew it. I would cover the seam allowance with a soft strip of fabric. If it's knit fabric you could simply fold it over the seam allowance - the serged stitches - and sew it down to the seam allowance close to the seam, catching both layers of the strip as you sew.
If you cut a strip to cover the serged stitches out of a woven fabric, cut it double the width you need so you can turn under the raw edges. Like bias binding, which you could make or buy already made at places like Walmart and Joanns.
If I were making the garment, or remaking it (altering it) I would definitely use French seams - especially the side seams of the shirt and the sleeve seams. Well, I say that, but sometimes I sew a straight seam, press it open, and leave it. Depends on the fabric. A French seam with a heavy or bulky fabric is not always pleasant, and a fabric that is prone to fraying needs a French seam. You could also try what used to be called a Hong Kong finish. It's when you bind the two raw edges of the seam allowance individually with binding. You'll see it used in unlined jackets.
You're idea of folding each seam allowance under itself and then sewing is good, but if you fold them together, as one, (Like a French seam but not sewn wrong sides together) you'll only have to make one pass under the machine per seam instead of two.
Thanks for this question.
For me to do this would be the same thing as making Princess Diana's wedding gown. This is wayyyy too hard. Off to the alterations shop it goes. I'm glad I watched this, and I recognize your skill, but this is why I hate sewing (and cooking.)
I hear you. It's good that you know where you want to put your time and energy
How. Do. I. My. 3x. To. 2x. Dress. From. Sides. Using. Hem. Tape. Can't. Afford. Cleaners
you want to take a size 3x dress down to a size 2x dress? You would take in both side seams slightly as shown in the video. You have the option of taking the dress in all the way down the side seams or stopping above any pockets.
Pretty sure I could never do this! 😂
I’m struggling to find instructions on how to reduce the material on dresses in the bust after having a double mastectomy.
You are not the only one. (I really need to figure this out so I can tell everyone) In principle, the way to reduce fabric is by making a dart, tuck, pleat or gathers, depending on where you're reducing (the side seam, the waist seam or the shoulder seam) . Maybe you could give me some more info on what exactly you're trying to do and that would give me a place to start my research. For example; the style of the dress now, does it have darts? what kind of darts, sleeves? neckline type, how you want the dress to look when you're done altering it and any other details. Thanks
@@TheDailySew it’s a skater dress, it has a v with a zip at the back, sleeveless and all the pieces are full length from top to hem. The front is a slash neckline and the problem I have is the middle top is shaped for a bust, I tried putting a dart either side but it looks odd.
It’s a lovely fit everywhere else and I don’t really want to have to take it apart, I’m looking for a quick fix. I’m not able to sew much now after I had a stroke, so the simpler, the better.
Thank you.
@@AnnLester-i2e Thanks for details. I'm going to have to do a bit of research but I will get back to you
I am a pear shape with size A breasts. This is exactly what I need to do. My new dress fits well everywere except for the chest area.
it's a little bit of a pain to have to alter your clothes after spending to buy them but it's more of a pain having nothing that fits right. So I have to get over it and make the alterations ;-)
because POCKETS!
I have to have at least one pocket.
If it is a side zipper, do you take it in at the back?
I would try to take it in at center back, yes. First, pinch out the excess in the back with clips or pins. Anything temporary. Then see how the garment looks. Check that the side seams aren’t pulled too much too the back. If everything looks good and the garment still falls as it should (not swinging to the back) then, yes, you can take out the extra width at the center back seam. Hooray!
Do you wash it off? I may have missed that.
Actually, that is a chalk marker I use. The chalk line just dissapers but you can "brush" it off with a dry wash cloth. (Clover makes the marker. It's called Chacoliner and they come in a lot of colors. I use them all the time and really like them)
I just eyeball my seams and it seems to work lol
Ha! Knowing where you can save time is very helpful. I have a friend who alters patterns and clothing by eye. She swears humans can judge distances better than they realize. Granted she works with her hands all day, measuring. She's a bookbinder so she has a trained eye. But still, she's correct when it comes to some people, and maybe all of us.
Where could I order the dress? ❤
The dress is from Boden (www.bodenusa.com/en-us) but I ordered it in 2022. Still might check their sale section