BEGINNER'S GUIDE - Onefinity CNC - How to Program & Run Your First Job Using Vectric - PART 1 of 2
HTML-код
- Опубликовано: 6 сен 2024
- Details on how you can get started with your @Onefinity CNC using V Carve Pro can be found in this video. We go over how to import a tool database to your software, design a basic profile tool path, learn about 3D toolpath animations and how that can help you seal the deal when pitching a project to a client, and saving the file as G-Code as well as a regular working project on your computer. The Part 2 video comes out next week and shows you all the steps to complete the job starting from turning on your machine to homing, probing for XYZ, router speed setting, and so much more! I am a beginner CNC user and am sharing things in real time as I learn them because I find that teaching forces me to learn it better for myself. Please comment with any suggestions you may have or feel free to reach out to me on Instagram @oakhillmillworks. Cheers!
Thanks for checking out the video today! Christy can also be found:
- Instagram @oakhillmillworks - / oakhillmillworks
- Facebook @oakhillmillworks - www.facebook.c...
- TikTok @oakhillmill - vm.tiktok.com/...
- RUclips: / @oakhillmillworks
- Website: www.oakhillmil...
Links mentioned (non-affiliate):
www.bitsbits.com
www.toolstoday.com
Mark Lindsay on teaching Vectric for the Absolute Beginner: • Job Setup - Part 1 - V...
The links below are affiliate links and will earn me a commission at no extra cost to you - I appreciate your support!
Items shown in this video:
3M Respirator from Taylor Toolworks: lddy.no/13322
Amana Tool - 46202K spektra coated ¼” spiral down cut: amzn.to/33AlQF0
Makita Trim Router - amzn.to/3p05MV0
Powertec T-track & clamps - amzn.to/3mbQNWi
Double Sided Tape - amzn.to/3rVwu2v
Full CNC List - a.co/7tKDvil
Alternate links:
Support Christy's Small Business Journey by Shopping through her links below!
Shop with Taylor Toolworks & Support 2 small businesses! - lddy.no/131nk & use XTRACT10 for 10% off your purchase of any 3M cubitron or Xtract abrasives!
CMT ITK Extreme - 10" 80T Ultra Finish Cross-Cut Blade - lddy.no/13pji
CMT ITK Extreme - 10" 40T General Purpose Blade - lddy.no/13pjh
ALL CMT Blades - lddy.no/13pjg
Shop my respirator set-up for paint and/or dust - lddy.no/13322
3M 710W - Best abrasive out there - lddy.no/13pjf
Shop on Amazon - www.amazon.com...
Shop Home Depot - homedepot.sjv.i...
Shop BAD North America - badnorthamerica... & use OHM10 to save 10%
Amazon Idea List Group Links:
Respirator - a.co/10bAt7U
CNC - a.co/7tKDvil
Power Tools - a.co/dLzLdd3
Woodworking Tools - a.co/gvYrd7V
Shop Necessities - a.co/bOvJfGk
Titebond Products - a.co/iTomGrt
Office & Shipping - a.co/2d4ezBl
Daily Gear - a.co/93G1DTg
Dust Collection - a.co/7yb7FPv
Tool Maintenance - a.co/f3HBLPL
Home Furnishings - a.co/iS5Bmvg
learning how to use a cnc, cnc woodworking, onefinity cnc, v carve pro, learning vectric, vectric, cad, cam, cnc machining, cnc, cnc business, onefinity, onefinity woodworker, onefinity journeyman, onefinity machinist, toolpath, what is a toolpath, what is g-code, how to make a cnc file, etsy
This is part 1 of a 2-part series aiming to specifically help new Onefinity CNC users who are using V Carve Pro but I believe any new Onefinity user could learn something from this. Thanks so much for watching - drop a comment and let me know what software you are running! 🤘🏼
I cannot begin to tell you how much this helped me!!!! So simple and straightforward and doesn't assume that as beginners we know all the "buzz" words. I have been struggling for months trying to get started. I watch both parts of this and headed to the shop and FINALLY it all came together and I was able to cut something. Nothing dramatic, but at least now I know what to do. THANK YOU so much!
Thank YOU for taking the time to tell me this. This is why I do what I do. I’m so happy for you! Time to rock and roll!!
It's crazy how much stuff you have to learn to drive into these machines. Vectric really makes it easy to learn for sure. Cool to watch you learning this stuff'
Thanks, Mike! It’s like the machines are pretty easy to use but the programming to get to that point is what takes some learning.
These are those videos that I learn the most from. From start to finish. Thank you again
Awesome to hear! My pleasure. I love that you find value in them. That is absolutely my goal.
Damn girl, I really appreciate your clear and concise teaching style
Woo hoo! Thanks for feedback and I’m so glad it was helpful.
I think you do an excellent job with explaining how to use Vectric V-Carve.
Thank you, Carl! I’m learning too!
This is a awesome video for a newbie!
I have been using the vcarve for four years, I really came here just to see what post processor you were using in the vcarve for the onefinity…
But watched the whole video because you are just an excellent teacher.
Great job 👏
Dang that’s so nice of you to take the time to give me that feedback. Thank you so much. I really enjoy doing it. I myself have been paralyzed by fear in the past so I’m hoping to help people get over that same hurdle.
@@OakHillMillworks just found out we are practically neighbors, we are in potter township Pa. So cool
So now I gotta subscribe 😂
@@BuildswithBrian Aw! I wish that were still true. We just moved to central Indiana this past August. Life has been nuts and that’s why I haven’t put out many RUclips videos since we moved. I have two coming out in a couple weeks though!
@@OakHillMillworks well good luck to you in Indiana! I’ll be watching your channel grow 👍
@@BuildswithBrian thanks, Brian!!
You are a great instructor! I know a little about cnc (I have shapeoko which I hate) but I learned something new from you about the cheat method! Thanks Chica 😊
Aw thank you very much! I have heard some not-so-great things about Shapeoko. I love the onefinity!
Its 1am, CST, I just finished putting together my 1F, and actually got V-Carve Pro. Can't believe I fell upon your video. I haven't a clue here so hopefully you can make it clear as mud for me. Here goes, and I'll let you know after I finish
That’s quite late to be learning that sort of stuff! You didn’t let me know how it went so I assume you didn’t finish or you fell asleep on your CNC table. 😂😴
Very easy to follow and just the right amount of information. Looking forward to part 2!
Thanks for the feedback!! I had to make them easy to understand because that’s what I myself needed.
Besides your site, I have to say Mark Lindsay is one of the best tutorials on vcarve.... bar none.
I started out blind with cnc. I knew nothing and expected nothing in the beginning. Watching Mark can be a little annoying because he talks slow, but you'll realize quickly he does this because he packs so much information in each tutorial. I soon was digging in vcarve and learning more on my own.
I don't plan to sell anything. I make things for the local neighborhood with children for free. Getting a note from the kids is all I need:)
So... Thank you for sharing your progress and info.
I agree! Mark really teaches it well. Sounds like you are very fortunate to get to make things for others. How cool is that? Thanks for the feedback! ❤️
@@OakHillMillworks Your welcome. Probably why I'm poor all the time... but the kids really do appreciate it and that is my payment. Worth every cent.
Keep making your great content!
@@wm973 haha! Well you’re rich in experiences… those are the things that matter in life anyway. We are moving out of state so videos will be delayed for a bit but excited to get the CNC back up and running in the new shop!
@@christymiller3789 You and your family be safe during your move.
Thank you so much for this info. Most CNC RUclips channels act like it’s top secret on how or where they get their bit databases.
Really?! I had no idea. It just seemed like an intimidating factor for me to know how to program that stuff and I still have much to learn but the databases are a great starting point. Thanks for the watch and comment!
boom! One more super helpful cnc video! Great Job!
Thank you!! Onefinity has given me the chance to become empowered myself so I am eager to pass that along.
This is a really good video/intro to aspire. Great job!
Thanks! Super basic but hopefully helpful to get over that initial hump!
Christy-so much good information in this video! I can’t wait to see the next one!
Thanks, Ryan!! We’ll see if I decide to post the next half before WBC or during it. 🤔🤔
Thank you for putting your time into this.
Thank you for watching it! I am glad you found it to be useful!
Good Video Christy. A lot of good info in this. Great for the beginner learning. Keep it up
Thanks, brother. Appreciate ya.
Great video, Christy! Looking forward to the next one!
Thanks, Tom! Your machine will be here before ya know it!
Great video! Please keep it up! And thank you for the shout out!
Thank you, Mark! I’m not going to act like seeing your comment didn’t make me totally giggle to see your name pop up on MY RUclips. I hope I can help others get started on their CNC journeys the way your videos helped me!
I’ve been considering getting V-Carve Pro. This gives me quite a few reasons more, seeing these steps!
What do you use currently for CAD/CAM?
Oh awesome. What do you currently use, Bruce?? Easel?
@@OakHillMillworks yeah, I design in Illustrator and then import to Easel Pro. I don’t love it.
@@BruceAUlrich man, Jef sings Easel’s praises seems like. It seems to be easy to use but maybe not as many bells as whistles?
@@BruceAUlrich I am curious if you'd be interested in doing some design work in illustrator for some extra $. I can import the DXF or SVG into Fusion at that point. Thanks for consideration.
Wow! Lots of content here! Nice work. Waiting for part 2!
You’re the best, Pops. ❤️
Great job! 🙌🏼
1F buddies 🤘🏼 wait a second. That sounds terrible and at the same time I want to put it on a t-shirt. 😂
Great video Christy! 👏👏
Thank you so much! New software can be scary and overwhelming. Hoping to break down those barriers. 👍🏼
Im greener then you. Nice job explaining
pay close attention to the chip load and stay within their recomeneded setting as it will change as you increase or decrease your rpm and feed rate in ipm. Chip load is important for tool life
Fantastic video, Christy! As you know I use Fusion 360. But I may dip my toes in to the V-Carve world here soon when I get the woodworker X50 in. I use Fusion because it was fitting my needs more than V-Carve would have by a mile. But I would like to do some actual carving with the new machine lol. (I seriously can't wait to get that thing in). Lol I almost offered OF up in Toronto to literally drive up, assemble it in their shop, test it and pack it back up. No joke. When you have stuff that you need to get done and waiting on the machine that is going to do it...a little frustrating to have to wait.
I have heard that fusion 360 is awesome! I don’t know people who use it with the 1F but I would encourage you to join the Facebook onefinity group if you haven’t already. Great place to network. You could always sub out some work in the meantime to not lose clients if it’s really time sensitive.
@@OakHillMillworks well this is for my own company. I don't have an FB account, deleted it years ago.
@@JF32304 I stopped using Facebook forever ago too! I made a business page recently and I tell ya what, that group is worth getting back on Facebook if only for onefinity group interactions. ❤️
You r awesome, keep going,
That means a lot. Thank you!!
Always dig the content! While I am still waiting on my journeyman, I have downloaded The car Pro trial. I will be purchasing it just not quite yet as it's a hefty chunk of change. Do you know if you can download the speeds and speeds from places like bits and bits before you have a machine? Just looking to get some of those things up and running to help reduce down time when the machine arrives.
Hey Jeremy! Thanks for watching! I’m excited to share the next half next week. Probably on Wednesday. - you can absolutely download the tool database at any point. The tools today version comes in a regular file you can print out and then you could highlight the bits you plan to use and just have the settings on paper. I didn’t try to open the bits and bits file in anything other than vectric but it is just a regular file you can download.
Corel Draw rocks!!
I would have to agree!!
I started with Corel 4 many many years ago,. Buying a onefinity. Should I learn the software that comes with it?
Do you know if these programs can be used with iMacs?
I believe Vectric programs only run on Windows. Check out something called Parallels. It acts as an app on a Mac so that you can run windows applications on Macs. Best of both worlds so I hear!
Bacon cheeseburger
🥓🍔 haha thanks for the love!