HUAWEI MateBook 13 - disassemble [4K]
HTML-код
- Опубликовано: 7 фев 2025
- Thx for visit.
We are creating our video tutorials for free and we want to support you!
If this video has been helpful for you, we will be happy about a donation 😊
PayPal.Me/FIXstudioDE
Quick tutorial how to disassemble Huawei Metabook 13, WRT-W29, 2019
fixstudio.de
Munich / Germany
![[How to] Huawei Matebook 2021 14'' display disassemble](/img/1.gif)
Больше спасибо, особенно за показ платы с обеих сторон😊
Thank you so much for the video! Please tell me which company and model to buy SSD for 1 TB for the 2019 model?
Almost any m.2 model should be fine
Is it possible to change the charging port? Seems like it's permanently fixed to the motherboard?
Can you change the motherboard, for one that has the MX250 card?
will it be compatible?
Здравствуйте, подскажите пожалуйста кулера в нем одинаковые или разные?
How can i remove the Keyboard on this model?
is this huawei matebook 13 2019 or 2020 model? because i have the 2019 model i want to upgrade the SSD capacity to 1TB is that possible or supported? thanks.
Yes, it`s possible..
good video, thx for u job !
Спасибо! Как раз сейчас было необходимо. Я правильно понял, оперативная память "с завода" не требует охлаждения
can we remove the keyboard after ?
CPU GPU ?
I have the same laptop and the hinge is very loose, can you post a video on how to tighten it. Thanks alot
Did you find out how to do it? I'm facing the same problem
by any chance is it possible to upgrade the ram ?
I'd like to know this as well but everywhere I checked online says you can't.
You cant
I Need to replace speaker. How Is made connector.
Thanks.
I have a question. I have the same laptop. If I open the back case of my laptop, will it void the warranty?
Basically not.
where is bluetooth on the mainboard?
Hi! What is the type of battery in this laptop? Thank you
hb4593j6ecw
Why not to tell, which tools are necessary?
Can I put 2 SSDs? or there's only slot for 1?
There is only one
Can someone help me put here.
Awhile ago I disassembled my matebook 13 to clean and change the thermal paste. After reconnecting the battery when i tried to turn it on the keyboard light turned on for a couple of seconds than turned off and the laptop wouldn't boot. After troubleshooting for awhile i got frustrated and left it alone and when i tried to boot it again after 15-20 minutes it turned on fine.
Recently I had to disassemble it again for thermal paste change and now I'm facing the same problem again.
Can someone please tell me if there is a specific procedure to bootup after disconnecting and reconnecting the battery, i can't seem to figure it out.
Did you solve it? I have the same problem
tnx, nice work
If the USB Type C power in port stops working. Will I have to replace the whole motherboard?
Hard to say, if you found someone who can fix it, then maybe not.
жаль что у него только один ссд, думал поставить второй но...странно конечно даже у сяоми 13 дюймовом есть второй слот под ссд...вот еще кстати непонятно как добавить оперативку, а то у меня 8 и как то это маловато
Cut my fingers trying to open it lol
Estoy batallando para volver q conectar la batería 🥲
Se puede aumentar la RAM? es que lo 8GB se me están quedando cortos...
@@pamelasarai1 eso mismo quiero saber, yo tengo una igual pero no veo ninguna memoria ram (física) creo viene integrado en la tarjeta madre
Pudieron resolver lo de la RAM?
Saan po pede pagawad14
👍👍👍
Can i replace CPU ??
Unfortunately no
Can I upgrade memory to 16 GB ??
Nope, it is soldered, unless you have a method to desolder the sticks and have compatible sticks, it's not impossible but very difficult, easiest, but costly option is to upgrade the entire motherboard to one with the specs you desire keeping just the display and housing and other components