It's even easier to do this via the inside of the wheels. Steer al the way to the right (and left for the other side) and unscrew 2 torx screws. You can easily reach the rear of the foglights from there. Takes about 2 minutes per side and your done, no risk of scratching or damaging your bumpers! :)
Yes, I have a 2014 A4 Quattro and the bulb may be the same but the outer lens/fascia is a rectangle. I accessed my right bulb super easily by steering hard right, then reaching behind the wheel well trim.
hi there ! i just wanted to say that i follow you for alot of A4 tips and upgrades etc etc...... and thanks for all the videos you do, very helpful. I just changed my fog grille and put new fog lights in on my 2012 Audi A4 as well because i was watching this video and helped me alot, but i was wondering, for the fog lights, can you adjust them because they might not be lined up? After i installed them, i know the passenger side is a little higher then the drivers side. I aimed my lights against a wall on a level ground , but they dont really line up. Do you have a video on these fog lights and how to adjust them ? When i got my new fog lights, i notice they might have an adjustment on the light , maybe ?
and how do you change it ???? you just showed me the light bulb !!!! show me how to take the burned out bulb out of the fork and put a new light bulb ???? show me the whole operation !!!😢😢😢
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
▬▬▬▬▬▬▬▬▬ஜ۩۞۩ஜ▬▬▬▬▬▬▬▬▬
T H A N K Y O U F O R W A T C H I N G !
P L E A S E L I K E A N D S U B S C R I B E !▬▬▬▬▬▬▬▬▬ஜ۩۞۩ஜ▬▬▬▬▬▬▬▬▬
Thanks for the easy to follow instructions and not making this video any longer than it needed to be.
Welcome! 👍🏼
Just changed cracked lense on my fog light after watching your video, thanks very helpful
Great! Welcome!
It's even easier to do this via the inside of the wheels. Steer al the way to the right (and left for the other side) and unscrew 2 torx screws. You can easily reach the rear of the foglights from there. Takes about 2 minutes per side and your done, no risk of scratching or damaging your bumpers! :)
Thanks for the info 👍🏻
You're awesome fella thanks 👍 exactly what I needed to see.
Welcome!
Legend, worked perfectly!
Awesome!
Thanks, it was helpful for me!
Welcome!
Salut! Am si eu un B8 si as dori sa imi schimb luminile pe ceata, vreau sa trec pe ceva led. Ma poti ajuta cu o recomandare? Multumesc!
Salut. Nu pot sa iti recomand decat sa iei unele de firma si omologate. Nu prostii pe care scrie ca sunt doar pentru off road.
Thank you very much... Very helpful
Welcome!
What year this Audi is but I have a B8 and my fog light looks nothing like that
It'a from 2010. You might have the facelift.
Yes, I have a 2014 A4 Quattro and the bulb may be the same but the outer lens/fascia is a rectangle. I accessed my right bulb super easily by steering hard right, then reaching behind the wheel well trim.
Thank you for the info 👍🏻
will the same spots for getting off the grill same for an audi s3 2010 8p
Sorry, but I do not know this.
Help! Replaced fog lights assembly and dash shows fogs with x through them!
Were the new ones in working order? Did you replace with same type or you tried to upgrade to something?
@@UltimateDIY I replaced both sides with entirely new assembly's because one side was cracked, and they are from Amazon from a brand called Labworks.
I have no idea.
hi there ! i just wanted to say that i follow you for alot of A4 tips and upgrades etc etc...... and thanks for all the videos you do, very helpful. I just changed my fog grille and put new fog lights in on my 2012 Audi A4 as well because i was watching this video and helped me alot, but i was wondering, for the fog lights, can you adjust them because they might not be lined up? After i installed them, i know the passenger side is a little higher then the drivers side. I aimed my lights against a wall on a level ground , but they dont really line up. Do you have a video on these fog lights and how to adjust them ? When i got my new fog lights, i notice they might have an adjustment on the light , maybe ?
Hi! If I remember right, they have an adjusting "screw" on them. Rotate that screw until you get the desired height.
Exelent! Thanks again!
Welcome!
A much faster way is to just come on from inside the tire space. Got it done on 5 minutes both sides. I also have a video on my channel.
Thank you for the info!
Thanks good guide.
Welcome!
thanks
Welcome!
thanks!
Welcome!
This isn’t a projector….that’s just a housing
In my country they are genericaly called projectors, indifferent of the technology used.
@@UltimateDIY I see, well great video any way!
Thanks! 👍🏻
and how do you change it ???? you just showed me the light bulb !!!! show me how to take the burned out bulb out of the fork and put a new light bulb ???? show me the whole operation !!!😢😢😢
Ciudat ca tot un roman se plange. Restul s-au descurcat cu cat am aratat.
@@UltimateDIY m-am lămurit singur, se schimba becul cu tot cu suportul din plastic și 50 Ron
Pai tu credeai ca se schimba fara? De asta ziceai ca e video incomplet? 🤣
Did you find out a way of changing the bulb? I'm stuck at that part.
You can't change the bulb without the plastic support. The plastic is actually part of the bulb.