Will be awesome! I can't wait to get back to driving once Chairslayer actually sells his manual hand controls so I can set up a car. I've been a double leg amputee since 2014 but started drifting in 2005 been driving since 03 and miss my track days but being ex Australian Army my back up to track days is Range Days lol!
@@reanukeevesauThat ain't the worst way to live! Good on ya doin more than most people. Chairslayer kicks ass, haven't seen him around the socials for a bit is he working on developing a kit to sell?
@@Joebobinator yeah he's not as active on social media as others but he's busy with his roll cage company and the whole time he's been working on how his manual setup for hand controls that he uses to drift has been going through prototype stages so he can develop a full integration setup for other people with disabilities, I know he's going to eventually release a pre made setup, ive had the opportunity to talk with him multiple times about it. He also has his 3d scanning company as well so he's a pretty busy guy, love his attitude and work ethic which has inspired me since my accident as well!
@@reanukeevesau I wonder if the "manual" auto conversion that Adam LZ has been working on would work for him. They got the system to behave like a sequential manual with a clutch and everything for the automatic supras and they are working on a system to do the same with the DCT gearboxes. They use a sim racing shifter lever, no reason they couldn't just put it on a thumb switch or any other kind of button.
@@Joebobinator yeah that's the way chairslayer has it setup on a thumb button on the throttle/brake hand control to change gears, runs through a program to hydraulic activate clutch then hydraulic gear change. The way AdamLZ setup that supra has me interested if I can do a similar setup on any other vehicle just with the a90 supra transmission with dct or I'd get a sequential adapted to hand controls. The tech advancements over the next few years have me excited for what's going to be possible. Like I use to ride a Honda CBR1000RR and also had a Ducati road bike as well. I've been looking at the Electric road bikes that have been coming out, the fact there's no transmission I need to change gears with my feet since I only have prosthetic legs and feet so it's a bit of a hassle, now the new Electric bikes have all the controls on the handlebars makes it possible for me to ride again!! Just need to convince the road transport authority that I can pass my riding test with it lol!!
TRay is so cool and he knows all these dudes but never really shows up in their stuff. He needs to get on that, I'd love to see him shredding with Chelsea/Adam/etc more. He's always around in the background, being more involved with these guys would just boost his channel idk why he doesn't...
I'm stuffed 2x4s or other spacers between the beads and let the tire sit outside in the sun for a few hours and then let it cool down before trying to mount it to spread the beads out. I've even put a heat gun inside the tire with spacers like pieces of wood to spread the tire out
another tip for tires like that, let them sit out in the sun for a bit, or at least when it was warmer. they'll expand a bit and you shouldn't have to try to hard to get the bead to sit
Killer to see that car revived. Never met the guys who drove it there but the license plate is from the same city where our shop is. See you next week at Ebisu.
rachet strap the tire, to get the tire to bulge a little. i feel ya. some tires just SUCK to mount and lift by just the top part of the tread. lifting by the bottom prevents the bottom half from flexing downwards.
For stubborn tyres, inflate a inner tube in the tyre to seat all beads then break one side, pull tube out, fit new valve and should be easy to seat the tyre. ✌️
Definitely, this energy thing works! In my country, we have a saying that roughly translates to "Your thoughts shape your life," or "As you think, so shall you be". 🔥
Tip for tyres that have been at the bottom of the stack is to put a tube in it and let it sit for a while and it’ll be waaayyy easier when you try fitting it. Obviously take tube out aha
I was there when those guys drove that E36 over crazy stuff. Il be keeping an eye out for the touring at matsuri. From my experience of Jzs i think you might struggle for cooling with that fan. Jzxs all run viscous and 2 electric fans stock and even then can struggle
So pumped that you guys are going to japan so I can see this in PERSON. this is something great for the bucket list and I hope that I can get a ride along a few time that weekend
Would love to see you do an AMA/Q&A vid or whats your plans going forward from FD? Trying different motorsports? Drifting world tour? International comps? Plans for Japan? Just Ebisu or more? Either way love watching your stuff. Have fun in Ebisu!
Obviously I can’t speak for him, but as he mentioned multiple times before, he loves to drift just for fun. Competing on a highest level takes away a lot of the “fun part” from it. I’d love to see him on a big stage again, maybe in DMEC, but it’s great to see him follow his heart in what he does.
@@OOoOski yea. But as a guest driver for 1 round xy or z championship, the pressures and strategies of going for a title don't come into it. Also there are more international comps than just the tipity top end. Or various other countries different grass roots comps. Just looking for something of his plans other than "do cool stuff" though v much his choice if he wants to share those details.
Trick for those stubborn tires if you don't want to buy the rubber ring is ratchet strap the tire to squish it and take the tire off the machine and hold it vertical
Just use a motorcycle innertube that is one inch smaller than the tire size... I still use starter fluid one of my wheels to not mess up the lip from the valve on the tube. Also Japan opened up October the 11th, we went last year and this year. But I get it if you didn't have all your shots. They changed the dates on when matsuri was suppose to happen last year and it was amazing having Ebisu almost empty and not dealing with fighting for the tire machine. Plan to go in the Spring if you are down.
The trick of using full tall beer cans to stretch the tyre out in the sun for a while I seen it from the Night ride boys and its works only one I had never seen b4 thought it was cool tip if your not in a rush 🤙
We recently had problems we the stock trans fork was scrapping the clutch on a e36 2jz with the stock bmw transmission ended up getting a Clutch Masters Hydraulic Throw-Out Bearing from drift hq that solve our problem 👌
Hell yea I can't wait to see you dooring all the homies at fall Matsuri. You might be the only one out there drifting a BMW. You definitely got the right people on the job to swap in a 1JZ and fix whatever needs fixing. Side X are a bunch of awesome dude's plus they got one hella crew that builds some badass drift cars. Make sure you put a few black zebra stripes on Adam's door. Im saving up all the cheddar I can so i can make a trip to Ebisu. It's at the top of my bucket list
Yo it’s rad to finally see this whole trip happen! But I’m also kind of surprised we never saw you and Vaughn do a whole trip and series of hitting all the tracks with a couple of Rtr mustangs. That would be rad to see too
Try this next time you’re seating beads. Use the cheetah while you put the air hose QD straight from the compressor on the valve stem. I have better luck doing it that then using the choked down air fitting coming off the machine.
Shiiiiit... I'm going to the Matsuri this November and i'll probably get to meet Chelsea? Or even better drive with him?!!! I'm think i'm gonna get a 404 error in a few seconds!!!
At the tire shop we would put a air fitting on a hose that is wide open we would put it on the valve steam to max the air flow and use a cheetah 🐆 on stubborn tires like that i did ag and tractors and heavy equipment tires most the time and they can be a bitch
From a tyre fitter: two man job,why you use the machines blaster have a mate hit it with the cheater at the same time. It’s simple n you don’t need anything that you don’t have on hand.
So many name on this Japan trip. It’s going to be great to see all the fun. All the content creators should put there names in a hat n pick one, than you gotta buy say $50 or $100us worth of stuff from up garage that the name u picked has to run on or in there car. Could be funny. Like cover the car in dumb stickers ,bedazzled silly shit everywhere or buy as many air fresheners n fill there car, foot long shift knob. You get what I’m saying.
You know your pissed off and over it when you don’t even put on a fresh glove after it’s ripped while your mounting tires🤣 We’ve all been there so many times
The fact you did all that in the isle with all the turbos and youre gonna use a stock turbo lmaooo. I dont have enough will power for that kind of move
We need daily Matsuri vlogs from Chelsea. This Matsuri is gonna be wild this year
Will be awesome! I can't wait to get back to driving once Chairslayer actually sells his manual hand controls so I can set up a car. I've been a double leg amputee since 2014 but started drifting in 2005 been driving since 03 and miss my track days but being ex Australian Army my back up to track days is Range Days lol!
@@reanukeevesauThat ain't the worst way to live! Good on ya doin more than most people. Chairslayer kicks ass, haven't seen him around the socials for a bit is he working on developing a kit to sell?
@@Joebobinator yeah he's not as active on social media as others but he's busy with his roll cage company and the whole time he's been working on how his manual setup for hand controls that he uses to drift has been going through prototype stages so he can develop a full integration setup for other people with disabilities, I know he's going to eventually release a pre made setup, ive had the opportunity to talk with him multiple times about it.
He also has his 3d scanning company as well so he's a pretty busy guy, love his attitude and work ethic which has inspired me since my accident as well!
@@reanukeevesau I wonder if the "manual" auto conversion that Adam LZ has been working on would work for him. They got the system to behave like a sequential manual with a clutch and everything for the automatic supras and they are working on a system to do the same with the DCT gearboxes. They use a sim racing shifter lever, no reason they couldn't just put it on a thumb switch or any other kind of button.
@@Joebobinator yeah that's the way chairslayer has it setup on a thumb button on the throttle/brake hand control to change gears, runs through a program to hydraulic activate clutch then hydraulic gear change.
The way AdamLZ setup that supra has me interested if I can do a similar setup on any other vehicle just with the a90 supra transmission with dct or I'd get a sequential adapted to hand controls.
The tech advancements over the next few years have me excited for what's going to be possible. Like I use to ride a Honda CBR1000RR and also had a Ducati road bike as well. I've been looking at the Electric road bikes that have been coming out, the fact there's no transmission I need to change gears with my feet since I only have prosthetic legs and feet so it's a bit of a hassle, now the new Electric bikes have all the controls on the handlebars makes it possible for me to ride again!! Just need to convince the road transport authority that I can pass my riding test with it lol!!
Ratchet strap around the center of the tire works great with the cheetah tank
Looks like A fresh drivers seat would be a solid upgrade lol
Those at least are super easy to find. Can't wait to see him pick through the local parts stores.
shipping seats is very expensive and seats in japan are quite cheap
I bet theyre going to do an upgarage shopping day before hand
Kudos to the previous owners, that is a solid adventure
It’s nuts how Chelsea quits FD, and immediately we have some of his best chill shop content ever. Like the good ole days came back around
Convince Taylor Ray to join you on the trip. Love seeing stuff with you guys together. 🤘
TRay is so cool and he knows all these dudes but never really shows up in their stuff. He needs to get on that, I'd love to see him shredding with Chelsea/Adam/etc more. He's always around in the background, being more involved with these guys would just boost his channel idk why he doesn't...
@@Joebobinator He's too busy recording 45 minute voiceovers for his videos
I'm stuffed 2x4s or other spacers between the beads and let the tire sit outside in the sun for a few hours and then let it cool down before trying to mount it to spread the beads out. I've even put a heat gun inside the tire with spacers like pieces of wood to spread the tire out
another tip for tires like that, let them sit out in the sun for a bit, or at least when it was warmer. they'll expand a bit and you shouldn't have to try to hard to get the bead to sit
Who doesn’t love E36 content? 🔥
Killer to see that car revived. Never met the guys who drove it there but the license plate is from the same city where our shop is. See you next week at Ebisu.
You guys got a shop in Dieburg? What car do you drive, maybe ive seen it :)
200SX S13, FD RX7 and some E36's.@@feelgoodinc611
Bicycle inner tubes around the bead work for me, once the tire catches the bead you just peel them out.
Flip the wheel face down next time and blast it, it puts the bead closer to the taper and makes it easier to seal.
With that coats machine specifically having the valve stem right where the cheetah shoots is the best way to air up a floppy tire on a wider wheel.
Awesome, Matsuri and E36 touring, that's some sweet different content. I love my E36 320i touring. Also in silver.
Post FD is already looking RAD!
rachet strap the tire, to get the tire to bulge a little. i feel ya. some tires just SUCK to mount and lift by just the top part of the tread. lifting by the bottom prevents the bottom half from flexing downwards.
For stubborn tyres, inflate a inner tube in the tyre to seat all beads then break one side, pull tube out, fit new valve and should be easy to seat the tyre. ✌️
Ever try putting a ratchet strap around the tread to push the bead out? Another good method to help get the bead on.
What I do is before I mount the tire I heat the side wall with a little propane torch not crazy hot but enough for some flex then bead it
Yes! I cant wait to see you ripping there. Im coming to matsuri its going to be sick! 🤙🤙🤙
You help give me hope brother, thanks. Can't put a price on humble & authentic. Best of luck with everything, salute 🤚
Definitely, this energy thing works! In my country, we have a saying that roughly translates to "Your thoughts shape your life," or "As you think, so shall you be". 🔥
Tip for tyres that have been at the bottom of the stack is to put a tube in it and let it sit for a while and it’ll be waaayyy easier when you try fitting it. Obviously take tube out aha
That or 2x4 cutouts and the sun lol
Inflate a tube inside the tyre, once seated break 1 side and remove tube, should be easy once 1 side is seated
The bike tube trick works amazing for seating those tires.
You're welcome ✌🏾
been waiting for this cant wait to see you back in japan your og japan vids with arron got me into drifting
I was there when those guys drove that E36 over crazy stuff. Il be keeping an eye out for the touring at matsuri. From my experience of Jzs i think you might struggle for cooling with that fan. Jzxs all run viscous and 2 electric fans stock and even then can struggle
So pumped that you guys are going to japan so I can see this in PERSON. this is something great for the bucket list and I hope that I can get a ride along a few time that weekend
Race cart tires are hard as hell to seat. So we used a ratchet strap to squeeze it onto the wheel. Awesome vid!
Mad props to the previous owners holy shit, what a baller way to go to ebisu AND selling an E36 touring over there might be even profitable. Respect.
And made an adventure on the way
Would love to see you do an AMA/Q&A vid or whats your plans going forward from FD? Trying different motorsports? Drifting world tour? International comps?
Plans for Japan? Just Ebisu or more?
Either way love watching your stuff.
Have fun in Ebisu!
Vaughan and Chelsea did a why he's leaving FD video if you haven't seen it, can't remember if it's on Chelsea or the RTR channel lol.
@@reanukeevesau why he left fd and doing cool stuff to push his limits. Great. Didnt say any solid plans for the future though.
Obviously I can’t speak for him, but as he mentioned multiple times before, he loves to drift just for fun. Competing on a highest level takes away a lot of the “fun part” from it. I’d love to see him on a big stage again, maybe in DMEC, but it’s great to see him follow his heart in what he does.
@@OOoOski yea. But as a guest driver for 1 round xy or z championship, the pressures and strategies of going for a title don't come into it. Also there are more international comps than just the tipity top end. Or various other countries different grass roots comps.
Just looking for something of his plans other than "do cool stuff" though v much his choice if he wants to share those details.
Put a ratchet strap around the tire tread and crank it down to seat them big pillowey sidewall tires. ❤
"I am one with the tyre" love it welcome to my world 💯❤️🇦🇺🤙
Trick for those stubborn tires if you don't want to buy the rubber ring is ratchet strap the tire to squish it and take the tire off the machine and hold it vertical
Just use a motorcycle innertube that is one inch smaller than the tire size... I still use starter fluid one of my wheels to not mess up the lip from the valve on the tube. Also Japan opened up October the 11th, we went last year and this year. But I get it if you didn't have all your shots. They changed the dates on when matsuri was suppose to happen last year and it was amazing having Ebisu almost empty and not dealing with fighting for the tire machine. Plan to go in the Spring if you are down.
The future videos from Japan are going to be sick👍🏼
we have been so lucky last year, especially on the almost private kita reverse day :)
oh fuck yes this will be EPIC, now this is what you call event prep!
Well,this should be interesting. What an odd site to see that wagon getting shreddy in that location
The trick of using full tall beer cans to stretch the tyre out in the sun for a while I seen it from the Night ride boys and its works only one I had never seen b4 thought it was cool tip if your not in a rush 🤙
i do this with tyres some time i put a tube in side and put a bit of air in leave over night seat easy
Yes I'm keen for these videos
It was pretty cool to see you not just talking about manifesting energy but also showing the results as it happens. Nice!
We recently had problems we the stock trans fork was scrapping the clutch on a e36 2jz with the stock bmw transmission ended up getting a Clutch Masters Hydraulic Throw-Out Bearing from drift hq that solve our problem 👌
Beating those tires. I would put a ratchet strap around the center of the tread, and tighten it down as hard as possible.
Hell yea I can't wait to see you dooring all the homies at fall Matsuri. You might be the only one out there drifting a BMW. You definitely got the right people on the job to swap in a 1JZ and fix whatever needs fixing. Side X are a bunch of awesome dude's plus they got one hella crew that builds some badass drift cars. Make sure you put a few black zebra stripes on Adam's door. Im saving up all the cheddar I can so i can make a trip to Ebisu. It's at the top of my bucket list
Can’t wait to see it all come together!
Yo it’s rad to finally see this whole trip happen! But I’m also kind of surprised we never saw you and Vaughn do a whole trip and series of hitting all the tracks with a couple of Rtr mustangs. That would be rad to see too
Put a ratchet strap around the tire and tighten it works every time
Try this next time you’re seating beads. Use the cheetah while you put the air hose QD straight from the compressor on the valve stem. I have better luck doing it that then using the choked down air fitting coming off the machine.
I tried all that haha
I drew the hotrod flames @6.34 in 2018 and I am also ‘dude flips car’ in your other RUclips video! 🤣 See you at Ebisu. 😎🔥🇯🇵 BP Underdog FTW
Im keen for this build and Japan content
Shiiiiit... I'm going to the Matsuri this November and i'll probably get to meet Chelsea? Or even better drive with him?!!! I'm think i'm gonna get a 404 error in a few seconds!!!
Hell yeah, I'm excited for ya man!
Im my opinion one of theeeee best drifters 💯
No shifter linkage rebuild or dssr? Or did I miss it?
What's the estimated weakpoint? As in what do you want to brake 1st?
Hellll yeahhh! Would love to see T-Ray go with you..
We want to see a full CD spec build on the channel!
Whats CD spec?
@@reanukeevesau Chelsea Denofa
cant wait to see the final result
If u flip it upside down and blast it with the cheetah that works well I hated doing trailer tires because of that
So stoked you are going ro be there! Edit: oh and machine and cheeta at the same time will do it.
Will be so sick to see a 36 ripping around Ebisu
4:28 -- Of course, RAM center caps. Ever an Aries! 🤣
Can someone tell me where you get the metal clutch pedal please.
Anyone?
Yo Chelsea you think spacers are okay to run ? If so what’s the biggest you’d say is okay before it’s gets to sketchy ?
How clutch delay helps for a drift? Deleted stock one on my e39 :D
At the tire shop we would put a air fitting on a hose that is wide open we would put it on the valve steam to max the air flow and use a cheetah 🐆 on stubborn tires like that i did ag and tractors and heavy equipment tires most the time and they can be a bitch
Poor m52 gets no respect. But running a 1j in Japan is the logical choice.
See you there 🤘🏼
I think I remember you having a JZ BMW from another video that you were going to send to Japan? Or am I mistaken?
Those look like the factory forged wheels off a 2002 Ram 2500 I bought new.
ayo thats me in the white laurel on school course with Martin 😅
hope I get to catch up with you at matsuri in a couple weeks dude!
Hope you are there while Grant and Jimmy are there.
Going for skids at the compound later?
You seemed more stoked about mounting that tire than winning fd lmao that’s why you’re the man
Nice you’re gonna be with all the homies soon at Ebisu
Ratchet strap usually works
Had the worst time trying to mount a tire for my walking lawn mower, at least 2.5 hours.
Just bought myself my first e36. M52b20 runs really rich on idle, is that fine, or should I fix something?
Haltech > link. All day, any day.
From a tyre fitter: two man job,why you use the machines blaster have a mate hit it with the cheater at the same time. It’s simple n you don’t need anything that you don’t have on hand.
134lbs on the money! Damn that was good
Best outtro ever hahaha puppers
Next time put a rachet strap around the tread and crank it down till you can’t no mo! ✌🏻
Don’t forget extra hood clips! 😂😂
Was that school course with grass????!!!!! How long ago was that lol
Wont be attending Drifting Appalachia? I live on the road its taking place
BMW/AU Falcon tandems in Japan?
Hell yea!
Use a ratchet strap next time brother. Works like a charm.
you have to hit up Sammit when u get there!
So many name on this Japan trip. It’s going to be great to see all the fun. All the content creators should put there names in a hat n pick one, than you gotta buy say $50 or $100us worth of stuff from up garage that the name u picked has to run on or in there car. Could be funny. Like cover the car in dumb stickers ,bedazzled silly shit everywhere or buy as many air fresheners n fill there car, foot long shift knob. You get what I’m saying.
E36 the World
You know your pissed off and over it when you don’t even put on a fresh glove after it’s ripped while your mounting tires🤣 We’ve all been there so many times
Bro so sick you are coming here. My car should be finish and reqdy to shred for Matsuri. Hope that we can drive together!!!
12:35 what is that???
We did it ! 😂
What happened to the Japan coupe?
Wheel bearings my man.
Hell yea ebisu content
The fact you did all that in the isle with all the turbos and youre gonna use a stock turbo lmaooo. I dont have enough will power for that kind of move
Chelsea about to take fd japan by storm 😂😂😂
oh fuck yea