I tried and tried, it didn't work. I'm using a ChipsBank flash drive but every thing I tried didn't work. I'm trying to get back my 2TB 😭😭
5 месяцев назад+1
BROOOO THAANK YOUUU 😭😭😭😭😭😭😭😭 ITS BEEN 3 DAYS LOOKING FOR A SOLUTION AND I STUMBELED ONTO YOUR VIDEO AND THIS TIME IT WORKED YOU ACTUALLY HELP ME THANK YOU SO MUCH BRO THANK YOU
I followed the instructions and managed to get the USB to be recognized by Disk Management. However, my former 1TB USB stick is now showing as a 30GB USB stick. It now works though without issue. **NOTE: When you're downloading the ChipGenius files, you're antivirus will likely flag it was malware. This is quite normal when downloading programs that are considered "hacker tools." You can either allow exceptions for the file and remove it afterwards when you're done, running a full scan later to be safe. The other option is to simply not take the risk and buy a new USB stick.
HELPPPP what should I do? I tried all the process but on the last part where need to scan, When I pressed start, it can't start scanning because it's written on the upper left UNKNOWN FLASH ID, what should I do pls?
Does this also fix my flash works on my pc and is detected on my TV but doesn't open the content on the tv also says drive not supported on my phone but it used to work
hey - do you have the winrar software installed on your computer - if not, then you need to install the winrar app on your pc by downloading it from this link filehippo.com/download_winrar-64/ once installed on your PC - then try opening it again and it should work
Hey can you please help me when i open up the first chip mptools it says unknown flass and in the box beside it says lockport fail and it wont let me start
My 500 gb hdd not recognized by pc nor i devices managment.. Am unable to see it in my computer.. But when i try to connect i hear voice as its pluged.. Tried to update driver and uninstall with no luck at all..! Am unable to change drive letter as its unrecognized any help..! My hdd has no noise like its broken.. Or faulty and never fall on ground..! Any help please
my usb is crashed and i couldint even see it disk part and disk manager even my computer cant read it after i run the my usb vendors repair thing pls help
@@InformationTechnologyZM Yes and Unfortunately, I gave up. I put in my USB Pendrive in another pc and then It locked due to the unnecessary security reason, and I even don`t know that pc damaged the software or hardware. thank you.
hi after i flash my pendrive with ecther and rufus for linux on the same day. my pendrive cant be use, it keep disconnecting for a few second after connected i cant use diskpart and nothing on disk management.is there any way i can refix i?
my issue to my Flash drive is before i try to copy the file from "acer travel mate ,Resource DVD" to my 128 Flash drive , then this happen cant recover my flash drive , please help me .
My sd card has stopped working even i connect on different devices but it is not showing any where may be it got dead will this method can be applicable ? For dead sd card
@@InformationTechnologyZM 500GB HDD (Seagate). I Bought an Enclosure so I can plug it in my PC. In the Device Manager, it is showing "No Media" and Zero bytes.
Bro my usb pen drive is not showing in any device not even in disk management 😭😭😭 and I have very important data in my pen drive what can I do pls reply me
Have you tried copying the link and downloading it from a different browser - see if that can help. You might also wanna watch out for any pop up message on the top of the browser and allow the downloading of the file
@@alsejohnartiaga1803 We can't do anything now,I tried many ways to get 64gb but failed,only way we can do was calling to SanDisk service support.I am trying it .
I tried and tried, it didn't work. I'm using a ChipsBank flash drive but every thing I tried didn't work. I'm trying to get back my 2TB 😭😭
BROOOO THAANK YOUUU 😭😭😭😭😭😭😭😭 ITS BEEN 3 DAYS LOOKING FOR A SOLUTION AND I STUMBELED ONTO YOUR VIDEO AND THIS TIME IT WORKED YOU ACTUALLY HELP ME THANK YOU SO MUCH BRO THANK YOU
You are welcome 🤗 I am happy to hear it worked for you
I followed the instructions and managed to get the USB to be recognized by Disk Management. However, my former 1TB USB stick is now showing as a 30GB USB stick. It now works though without issue. **NOTE: When you're downloading the ChipGenius files, you're antivirus will likely flag it was malware. This is quite normal when downloading programs that are considered "hacker tools." You can either allow exceptions for the file and remove it afterwards when you're done, running a full scan later to be safe. The other option is to simply not take the risk and buy a new USB stick.
Redo it again u will get the fill size
Great idea
@@godfredyeleboue are you sure?
same to me, I have 64GB flash drive but now is like 8GB
U r genius sir ....I watched different videos ...noone help me...but ur video helps ....thanks a lot
Most welcome - I am happy to help
HELPPPP what should I do?
I tried all the process but on the last part where need to scan, When I pressed start, it can't start scanning because it's written on the upper left UNKNOWN FLASH ID, what should I do pls?
buy a new usb drive
after using Firstchip Mptool then scanning, However my former 128 USB is now showing as "insert a disk"
Mmm, I means you cannot access your USB data, am I right
@@InformationTechnologyZM yes
my flash drive change to DVD disk
I have a Kingston DTSE9 16gb flash drive.It doesn't show on the software.I tried refreshing it but it didn't worked.What can I do now?
Thank you fery fery much.. It work with me and I am from Egypt 🇪🇬♥♥♥
That is so amazing to hear - glad my video helped you
finally a solution that really worked !!!!!!! thanks so much
You are welcome 😊
my usb flash drive not showing in chipsbank tool, any solution?
Bro my 64 GB pendrive was Breck and with this solution I solve it but there is one problem it is showing size of pendrive 15gb instead of 64gb
controller vendor showing as unknown. can u pls help me out of this?
Which company is your usb from - which vendor
@@InformationTechnologyZM wD Blue ssd 510
Thanks mate very helpful 👍
Your are most welcome
Does this also fix my flash works on my pc and is detected on my TV but doesn't open the content on the tv also says drive not supported on my phone but it used to work
Hi - are you able to format the flash drive on computer?
i cant do here b/c it says that WinRAR diagnosis message chipgeinus cannot execute... how can i solve this error...sir
hey - do you have the winrar software installed on your computer - if not, then you need to install the winrar app on your pc by downloading it from this link
filehippo.com/download_winrar-64/
once installed on your PC - then try opening it again and it should work
I can't download the firstchip file it says I'm not allowed to access the file
That’s strange
Hey can you please help me when i open up the first chip mptools it says unknown flass and in the box beside it says lockport fail and it wont let me start
I'm having the same problem
Can i use this method twice??
I actually did this yesterday and it worked successfully but now the same problem returns what should i do plzz💔
Give it a try - it may work
Thank you Veryyyyyyy Much. The only person who actually helped me!!!!!!!
Hey friend - I am glad the video was helpful and thanks for subscribing the channel
In disk part there is not showing no media my pendrive SanDisk not working reply
Did you download the software
Did u have SanDisk cruzer blade 8gb pendrive
Also I have that drive, but it is 32gb. and i could not found the firmware there… anybody has the same problem?
@@elsapallo6697 me 😭
The last choice is throw it to thrash bro 😔
I tried and tried, it didn't work. I'm using a alcor micro flash drive but every thing I tried didn't work. I'm trying to get back my 64gb
Maybe get a new one
I dont want to run it sais everything is malware and when i try to run it say it malitious, I dont want virus please help
when i put the password for chipgenius it says "cannot execute"
Mmm 🤔
@@InformationTechnologyZM Hello For SSS VENDOR WHICH MPTOOL WE HAVE TO USE
Not able to get the controller vendor name...saying unknown while my pendrive is SanDisk
mmm did you try inserting the USB in a different port?
Life is too short men, buy another one
😋😋😋
"Generic external 1.14" not available here, pls help
the test rack is not showing on mine please help
Which vendor
@Information Technology my pen drive shrank to 30 gb from 64gb
What to do?
Hey - have you tried redoing the process? I am not sure if that can help - as it happened with some other users too
@@InformationTechnologyZM I also tired but nothing changed.
the first scan fails , what can i do
Did you give it another try
OMG WHYYYY! I keep clicking the link but it won't start downloading...
Hey friend - try copying the link and pasting it in another browser and see if that can work - try to download it from another browser.
My 500 gb hdd not recognized by pc nor i devices managment.. Am unable to see it in my computer.. But when i try to connect i hear voice as its pluged.. Tried to update driver and uninstall with no luck at all..!
Am unable to change drive letter as its unrecognized any help..! My hdd has no noise like its broken.. Or faulty and never fall on ground..! Any help please
one question, my data will be lost or not? because i dont want to lose them
Yes, the data will most likely be lost
@@InformationTechnologyZM what can I do to save or receive my data again.. recovery possible or not
thanks man .. but how to insert the flash into the usb slot ???
You are welcome 😊
@@InformationTechnologyZM I can't find this flash (FC1178E)
I tried the others but it doesn't work
thank you! you saved me!
You're welcome!
Thanks Bro it worked.
Great to hear
I am sure I have faced with such problem which I couldn’t solve but now I know how to fix it next time
Great
The Chip Genius software contains a Trojan:Win32/Occamy.CD4 - not good.
That's strange
I tried this but my vendor Virbatim is not on the list for MP tools.
i can't find part number in this site which showed by chipgenius.please help
wow..thx dude u save me..
Happy to help
this really helps! thanks mate
Glad it helped!
my usb is crashed and i couldint even see it disk part and disk manager even my computer cant read it after i run the my usb vendors repair thing pls help
please help me it doesnt show up in disk management and in computer,please help me i need my usb to make bootable usb please reply fast
Does it make a sound 🤔when you plug in the usb?
@@InformationTechnologyZM no it doesn't
Also have you updated your windows recently
Was it working before this
@@InformationTechnologyZM yeah it was working last time i used it
it worked! but my 128gb PD ab 30gb show hora hai isse kese thik krna hai
Mmm that’s strange but hope better than having nothing
If your Controller Vendor is Phison, all the scenarios will be different. I couldn`t finish the process, unfortunately.
Oh so sorry 😞 to hear that - did you try redoing the process
@@InformationTechnologyZM Yes and Unfortunately, I gave up. I put in my USB Pendrive in another pc and then It locked due to the unnecessary security reason, and I even don`t know that pc damaged the software or hardware. thank you.
Thank you family
You are so welcome
It shows that controller vendor: Alcor controller part -Number:AU6366/AU6371 how to solve this problem
tried so many versions but it didn't work
Mmm interesting 🤔- maybe it's broken
Thank you !!!
hi after i flash my pendrive with ecther and rufus for linux on the same day. my pendrive cant be use, it keep disconnecting for a few second after connected i cant use diskpart and nothing on disk management.is there any way i can refix i?
Try again by using a different PORT
Will I be able to recover my data after fixing pen drive
Thats something I haven't tried but most probably not
actually i don't have the option of changing the letter
instead I have initialize disk
please help me out
Me too. Oh... Damned! I don't get a solution yet
Usb dev tool not showing flash id code
Thanks , for the help...It has worked now
You're welcome!
but how about the recovery of files?
If your USB is at this stage - will be hard to recover anything
Mine doesn't show anything even in the disk management it's only showing in the devices and printers how can I fix it plz
Change the drive letter in the devices and printers
I can't able to download the softwares....
Windows detects a virus...
@@demispap8552 what to do then sir
Just allow the download/install
I followed all instructions carefully & this Alcor Micro can't show in website & everything did not work 💀
How to find the controler vendor it requires powerful detection
Damn..man..u earned a sub👍
Thank you for subscribing - hope you'll find other contents in this channel useful as well
my issue to my Flash drive is before i try to copy the file from "acer travel mate ,Resource DVD" to my 128 Flash drive , then this happen cant recover my flash drive , please help me .
But can you format the USB
@@InformationTechnologyZM cant format my flash drive
Not download
mmm did you try again - shouldn't be a problem
@@InformationTechnologyZM ok
My pendrive is now showing .bt it got formatted.so lost all my data.so now how can I get back my data..plzzz replyyy
ruclips.net/video/c24fTuCktHs/видео.html watch this video and see if can help
How can I recover the files on my drive if this happens
it works but when i take out the usb and plug it in again it returns to no media and doesn't show up anymore what should I do
Mmm maybe it's badly broken
wow ! so nice your youtube keep it up
Good job glad to help
This is good video
Glad you liked it
@@InformationTechnologyZM my pen drive shrank to 30 gb from 64gb
What to do?
sir?i have Alcor Micro usb controller vendor.I cannot find a good file for my usb
Hey 👋 is your usb write protected?
Great video
Thanks 🙏
I have the manufacturer as Alcor Micro and there are so many download links I don't know which one is like you had
What if nothing shows up in the scan but the USB drive shows up in devices and drives.
In that case - it's very simple to fix. In the devices and drives Just right click on the USB and assign a new letter for it. Let me know how it goes
I AM FOLLOW THE ALL METHUD BUT MY USB NOR SCANE
im really desperate to recover the files on my Seagate Hard drive. How do I know the Device Controller for my Seagate Hard drive?
See if this video can help you recover your files ruclips.net/video/c24fTuCktHs/видео.html
Please help.. the second scanning is sometime it decreases the numbers when it is scanning and sometimes it freez? Please help me sir
Keep trying and let it go till the end - as said in the video - it will take up to a few hours
I can't download the chipgenius
Have you allowed the download in your browser - make sure you allow download in the pop up message under the URL or try it in another browser
after follow your instruction by not show controller vendor
Thanks so much it works for me
You are welcome my friend - so happy to hear that it's working
My sd card has stopped working even i connect on different devices but it is not showing any where may be it got dead will this method can be applicable ? For dead sd card
Give it a try - it might work - what's the capacity of the SD card
@@InformationTechnologyZM 16gb
Give it a try - I am not sure you will be able to get full capacity. 😉
mine is not showing the device controller. how can I know? The hard drive which undetected and showing zero bytes is seagate
What's the actual size of your hard drive? If you use this method, it will erase all the media -
@@InformationTechnologyZM 500GB HDD (Seagate). I Bought an Enclosure so I can plug it in my PC. In the Device Manager, it is showing "No Media" and Zero bytes.
my 2tb has become 14gb
Was it a USB stick
Bro my usb pen drive is not showing in any device not even in disk management 😭😭😭 and I have very important data in my pen drive what can I do pls reply me
mmm - then don't use this method cuz it will delete all media inside the USB -
thank you very much
Bro it not showing my usb
From which company is your USB
@@InformationTechnologyZM Hp bro
How to fix if unknown id occurs?
It doesn't scan two times sir it takes 52 min for first scan but still can't recover my pendrive sir what can i do sir
Can I scan two times like this sir
Sure give it a try
@@InformationTechnologyZM ok sir but still not recover sir I tried all the way sir 😭
My usb is not detected by firstchip Mtools. I tried with all usb ports.
Does it make a sound when you insert the USB into the port
@@InformationTechnologyZM yes
why mind is like this?? Unknown flash drive id then
when i press start button it will not scan
have you tried putting the flash into a different usb slot
@@InformationTechnologyZM yes
I can't download the chip USB I can't see the file to install it
Have you tried copying the link and downloading it from a different browser - see if that can help. You might also wanna watch out for any pop up message on the top of the browser and allow the downloading of the file
My other cannot complete format. How do I work on that please
What's the size of the USB
@@InformationTechnologyZM 8GB
Hi there, unfortunately the password you gave on the above video does not work to open the .exe
It should work - make sure you type exactly how it's shown on the video - give it a try again
@@InformationTechnologyZM thank you, yes it did, unfortunately the USB drive was not able to be saved, but it's within it's warranty, so all good.
thanks man, it worked :)
Awesome 👌
u r god thx it worked
Glad to help
Mine was same as yours FirstChip and FC1179, 64gb ,when I done it I got 32 gb ,I think you to got the same ,can u pls tell me what to do
Also mine.. but my 64gb become 14gb
@@alsejohnartiaga1803 We can't do anything now,I tried many ways to get 64gb but failed,only way we can do was calling to SanDisk service support.I am trying it .
Just contact sanDisk service center and replace it,If pendrive was authentic .Mine was fake one.
Redo the process to get the full size
Blue color Samsung 16gb hdsc memory card
Controller vendor...unknown
Can anybody give Controller vendor...for this....
Did you have success finding your controller vendor
Winrar password isn't working.
doesnt show up at all
when i download usbdev it download as notpad help please
mmm
lock port fail and my problem is not solved
Did you try it in a different port
Too fast i cant follow