Howboutcha Hank , I would go with the 2wd That’s all we had on the farm. They worked great, even with a loader, the front tires were the same with the center rib, and when you had to turn with a load on the front just had to use a little assistance from the right or left brake pedal.... God Bless, Terry
Good point Terry. Derrick actually talked about using independent braking, ,but I had to edit that part out because of some technical difficulties. Thanks for commenting. God bless!
Awesome video as usual, I love my 4550 4wd and has been great on farm with plowing, disc, pulling corn planter, Bush hog, now at 150 hrs no problems. I still have my older 2wd that is my choice for most Bush hog work and blade work. 4wd is useful in loader operation and on hillside work in which I do a lot of.
I considered 2wd. My bx2200 was so light I HAD to use 4x4 almost all the time. I thought a heavy tractor wouldn't need it except for mud. I'm glad the group talked me into 4x4
I grew up in a rual community with lots of small farms and land owners, everybody had small utility type tractors and all of them were two wheel drive tractors that always seem to get the job done.
I have the same tractor, I did swap out the front wheels and tires to wider. Made a big difference lifting 2500 lb pallets. Great machine, 4wd would have been nice but have really never needed it. Like he said, hard to get stuck with a loader.
I just measured the max back spacing and took a wheel and tire with me to the co-op. They have a reversible rim that did the job and the tire is just a steer tire that they had in stock. It's way wider and slightly taller. Don't know how to put a picture .
Have had a 4540 for almost a year now in Texas Hill Country. My MF finally gave up and I went shopping. I found Deere and Kubota WAY overpriced. MF was better, but still several thou more. I bought 4540 because it is an older, more mature design and simpler. 4WD is hydrostatic front wheel drive and adds whole new dimension of complexity for maintenance and repairs, not just up-front price. If you need it, you need it. I am very happy with 4540 2WD. I ESPECIALLY like quick change skid steer front end. Have always had a bucket loader, but am now in love with pallet forks. M2c
So do I need to double clutch on my 4540 to keep the greats from scraping. Mahindra said I need to run the pot and that would stop . Well 2years later and it still does it . And most of the time ideal down to change gears and it’s still make noise
Does that Mahindra have separate rear brakes to help make turns? That's really the only reason I can see not to buy 4wd these days. Had a Ford 2610 & MF 35, you could whip them around using the brake when bush hogging & road repair. Neither had a bucket on the front.My new MF GC1705 4WD R4s with loader is way more modern & much smoother, couldn't imagine using the loader without 4WD. Although, as low as the GC is, I would have taken the 2610 in muddier places with full Ag tires than I'd take the GC. Much more clearance underneath.
Hank! Nice video! Thats cool that you got to head out there and check out that rig! Being in New England with the wild winters we have I couldnt get a 2wd! I got my kubota BX as you know for a good deal so I couldn't pass it up but you guys both had some great points on the differences!
@@HomesteadJay lol. That's right you weren't. I remember now. I watched that video several hours ago, so as an old guy, I have an excuse for forgetting the details. Hahaha
Good evening Sir ! Very nice tractor, personally each of them have good and drawbacks but Joe's tractor is a real bushwack tractor and it's not a 4wd !!! Very nice video Sir and great tractor and Yes I agree with Joe you going to be very popular !!! Ho I forgot SIR !!! It's Joe Lesage birthdays on the 14 Sep !!! Cheers !!!
Hank, I have been watching severa of yourl videos. I have been considering a 4540 4x4, with loader and backhoe. You asked about a backhoe on the 2wd. You mentioned possibly a 3pt hoe. A 3 pt backhoe puts a lot of stress on the tractor itself. Depending how much use ore hoe rough the work is... it could break a tractor in half or at least cause damage. I would never use or buy a 3pt backhoe. A backhoe should always be mounted on a sub frame (some call it a sled) this is sub frame is mounted to the tractor, which displaces the stress on the tractor frame or bolts. Of course the backhoe mounts on the subframe.
Lots of people have two wheel drive tractors and put heavy duty chains for extra traction . They have there advantages for certain things like you said turning sharp Ploughing etc . For the average hobby farm there great . I must admit though after having four wheel drive tractors for over thirty years I dont think I could go back . Ok so when do I get too see the 50 hp cab 4x4 review 😂 . I have been staying away from my dealer . I need some motivation too go spend some money too stay warm this winter 😬 .I still think you look like a Mahindra sales guy with those sun glasses 😂. Good review Hank 👍
If it doesn't have a loader I prefer 2wd. I mostly do small scale hay and if it's too wet for my 2wd then I probably shouldn't be in it. I've done some acres tilling food plots with 2wd and understand how other operations might gain from it. IMO, gently used 2wd tractors are some of the best buys on the market because they deprecate quicker, and cost less from the start.
I prefer the 4wd Kubota Grand 60 series tractors. My dad has a MF 383 and a MF 275, both 2wd. He wishes that the 383 was 4wd since it has a loader on it. So far this year, I have only had to pull him out once with my Kubota. Although comparing my Kubota to his two tractors isn't a fair comparison since both of his our larger than my Kubota L3560HSTC. Yet, mine being 4wd and lighter has allowed me to get into places where his bigger tractors just sink down (we have been doing work around the creek bottom and it has been a wet year). As it was pointed out in your video, if you know the limitations of your tractor and work within them, you are going to be successful. If you don't work within them, just make sure you have a second tractor to pull you out. :)
My 2 cents on it is maybe without a FEL but front weights instead cutting hay/rough cutting in a pulling type role on flatter land seems more suitable. Guessing a FEL is okay on flat ground just on an as needed occasion is okay with 2wd. That FEL would be hard on that front end if continuously used. Better suited for 4wd. Otherwise a 2wd has many applications.
I think that is a beautiful Tractor. Like someone said below in the comments there is not another Mahindra Tractor I would consider in their line. My preference would be 4540 4 WD. Great machine for the money. Real winner. Hank, when you become rich and famous, don't forget us little people . 🤓 Mark.
I just bought a used 2018 4540 4wd with a loader, box blade and bush hog with 300 hours on it for $17,000. I needed it for a Lane Shark so I also added their third function kit, and those 2 added another $7k to it. So I'm in it for 24 and have about a mile of roads with trees to trim, and 3 miles of fence lines to maintain. I'm told once I find the gear that works best for that job it will take me hours instead of days🤷🏻♂️
@@HamiltonvilleFarm hope you are well sir. I miss the Hamiltonville Farm 4540 videos. You loved that Tractor. I was so close to buying one because of you. Ended up with 2 LS Tractors and a 50 hp JD. Take care brother.
I have 4WD Mahindra Max XL 28, My property is hilly. I leave my tractor in 4WD Low majority of the time. The only time I use 2wd is when I move down the road.
Sliding Mesh Trans are Proven and will do the job they are just not as user friendy in the long run but any good operator will make them work well . I am suprised that hes got a 2 wheel drive tractor and not one with Front assist like most are . In my applications of heavy large acre work its no contest the 4 wheels will avg a good 1 mph faster which results in more work done and less fuel burned since all of todays tractors are designed to be 4 by 4. And up til about 20 years ago most 4 wheel drive tractors did not work well in Row crops . But if you look at the tractors made today they have figured out a lot to make them track rows. They raised engines to sit up higher and also made the Front Radiator sit ahead of the front wheels for better Turning and weight Dist plus most frames were sculpted for the wheels to turn in the frame without rubbing
Derrick get you a pallet fork. You will love it. I got the same tractor. Also built a nice carryall box like diymyway built here on RUclips. Very handy.
Great video. I say if you can afford a four-wheel drive you won't regret it. Better to have it and not use it than to need it and not have it. I have a two-wheel drive for my hunting club and find myself and situations where a four-wheel drive is really needed
Nicely done, Hank. You're really getting this interview role down pretty dang good. So, I'm wondering...am I going to see you on Fox News next? 😊 Great job, brother. Full-watch.
my uncle had this tractor and and john deere 3032e i think he sold the mahindra im not sure on the mahindra whenever he disced with it he would often spin a lot but hey its a good tractor and its a 2wd not gonna complain it gets the job done also idk if you know this but you got two levers on the right one to let implement down and another to make it go further into ground and my uncle would have fun on it like locking the brakes up and trunign sharp making it spin the wheels it was pretty hilarious
John, your comments always go to my spam folder. lol. Doesn't matter if you say "hello" or write a 500 word essay in the comment section. Every time, wonder why that is? lol Anyways, I know I can always find your comments there. Hope you have a good day buddy.
Uh, 4x4 in 3 words... Mud and snow🤪👍 also you stop eating donuts after the last one is eaten🤪. As to when it’s “right” we’ll, that’s a tasty debate, hopefully a lengthy tasty debate😝👍
Check out more tractor videos here: ruclips.net/video/Tnuc7Lb9z_8/видео.html
Howboutcha Hank , I would go with the 2wd That’s all we had on the farm. They worked great, even with a loader, the front tires were the same with the center rib, and when you had to turn with a load on the front just had to use a little assistance from the right or left brake pedal.... God Bless, Terry
Good point Terry. Derrick actually talked about using independent braking, ,but I had to edit that part out because of some technical difficulties. Thanks for commenting. God bless!
All tractors were 2wd not too many rears ago! Love my 2wd 4540!
Awesome video as usual, I love my 4550 4wd and has been great on farm with plowing, disc, pulling corn planter, Bush hog, now at 150 hrs no problems. I still have my older 2wd that is my choice for most Bush hog work and blade work. 4wd is useful in loader operation and on hillside work in which I do a lot of.
Interesting and cool that you get to choose between two tractors👍 thanks for the comment 👍
I considered 2wd. My bx2200 was so light I HAD to use 4x4 almost all the time. I thought a heavy tractor wouldn't need it except for mud. I'm glad the group talked me into 4x4
I hear ya. A 2wd has its role, but I'm happy with a 4wd too.
I grew up in a rual community with lots of small farms and land owners, everybody had small utility type tractors and all of them were two wheel drive tractors that always seem to get the job done.
Yeah they definitely have their place. Thanks for watching 👍
I have the same tractor, I did swap out the front wheels and tires to wider. Made a big difference lifting 2500 lb pallets. Great machine, 4wd would have been nice but have really never needed it. Like he said, hard to get stuck with a loader.
I hear ya. If you treat them right, you can get away with a lot of stuff. I appreciate the comment. Thanks for taking the time to watch.
What tires and wheels did you use? Would love to see a pic
I just measured the max back spacing and took a wheel and tire with me to the co-op. They have a reversible rim that did the job and the tire is just a steer tire that they had in stock. It's way wider and slightly taller. Don't know how to put a picture .
Driving up a hill with the bucket full will be almost impossible without 4 wheel drive or a bunch of weight on the rear.
Yeah, John you really need to know what you're gonna be using the tractor for. Thanks for the comment and thanks for watching! Have a good night.
Back up the hill in that case or leave a heavy bushhog on it. Love my 4540 2wd.
@@tenncutt that's a good idea👍
@@tenncutt doesn't work in tight areas, too much sticking out the back, your case maybe, mine not
yeah my uncle mahindra 4540 often started spinning when he tried to push some brush off or discing
Thanks for all the great info on the 4540! Help me make my decision on the purchase on my 4540
Thanks for watching!
Have had a 4540 for almost a year now in Texas Hill Country. My MF finally gave up and I went shopping. I found Deere and Kubota WAY overpriced. MF was better, but still several thou more. I bought 4540 because it is an older, more mature design and simpler. 4WD is hydrostatic front wheel drive and adds whole new dimension of complexity for maintenance and repairs, not just up-front price. If you need it, you need it. I am very happy with 4540 2WD. I ESPECIALLY like quick change skid steer front end. Have always had a bucket loader, but am now in love with pallet forks. M2c
Right on! Good input. Thanks for the comment and thanks for taking the time to watch. ,👍
So do I need to double clutch on my 4540 to keep the greats from scraping. Mahindra said I need to run the pot and that would stop . Well 2years later and it still does it . And most of the time ideal down to change gears and it’s still make noise
I just bought the two wheel drive 4540 .can't wait to get busy .
👍👍
Does that Mahindra have separate rear brakes to help make turns? That's really the only reason I can see not to buy 4wd these days. Had a Ford 2610 & MF 35, you could whip them around using the brake when bush hogging & road repair. Neither had a bucket on the front.My new MF GC1705 4WD R4s with loader is way more modern & much smoother, couldn't imagine using the loader without 4WD. Although, as low as the GC is, I would have taken the 2610 in muddier places with full Ag tires than I'd take the GC. Much more clearance underneath.
Yes it has independent brakes to allow for sharper turning. Thanks for the comment. It is appreciated.
Good evening. Application is key. 4wd & 2wd each have their applications.
You sir are correct. Thank you for taking the time to make the comment I appreciate it.
Appreciate your time spent on vlogging. I'm up here in Michigan.
Hank! Nice video! Thats cool that you got to head out there and check out that rig! Being in New England with the wild winters we have I couldnt get a 2wd! I got my kubota BX as you know for a good deal so I couldn't pass it up but you guys both had some great points on the differences!
Thanks Jay. I know since you drove the Mahindra in your last video, we may see one at your place😂😂😂
@@HamiltonvilleFarm I wasnt driving haha so I didnt get the bug yet hahah :)
@@HomesteadJay lol. That's right you weren't. I remember now. I watched that video several hours ago, so as an old guy, I have an excuse for forgetting the details. Hahaha
@@HamiltonvilleFarm Hahah its all good! What i want to get my hands on is the 25k Wood-Mizer in the back ground hahaha
Good evening Sir ! Very nice tractor, personally each of them have good and drawbacks but Joe's tractor is a real bushwack tractor and it's not a 4wd !!! Very nice video Sir and great tractor and Yes I agree with Joe you going to be very popular !!! Ho I forgot SIR !!! It's Joe Lesage birthdays on the 14 Sep !!! Cheers !!!
Lol. Right on brother. Thanks for watching and commenting 👍
Hank, I have been watching severa of yourl videos. I have been considering a 4540 4x4, with loader and backhoe. You asked about a backhoe on the 2wd. You mentioned possibly a 3pt hoe. A 3 pt backhoe puts a lot of stress on the tractor itself. Depending how much use ore hoe rough the work is... it could break a tractor in half or at least cause damage. I would never use or buy a 3pt backhoe. A backhoe should always be mounted on a sub frame (some call it a sled) this is sub frame is mounted to the tractor, which displaces the stress on the tractor frame or bolts. Of course the backhoe mounts on the subframe.
I agree 💯.
4wd. Southwestern PA, we get snow. 4wd is handy
I hear ya Jason. Need that for snow.
Lots of people have two wheel drive tractors and put heavy duty chains for extra traction . They have there advantages for certain things like you said turning sharp Ploughing etc . For the average hobby farm there great . I must admit though after having four wheel drive tractors for over thirty years I dont think I could go back . Ok so when do I get too see the 50 hp cab 4x4 review 😂 . I have been staying away from my dealer . I need some motivation too go spend some money too stay warm this winter 😬 .I still think you look like a Mahindra sales guy with those sun glasses 😂. Good review Hank 👍
LOL>>>I'll tkae them off for the next video! It was really bright that day. 😎 I appreciate the comment my friend.
If it doesn't have a loader I prefer 2wd. I mostly do small scale hay and if it's too wet for my 2wd then I probably shouldn't be in it. I've done some acres tilling food plots with 2wd and understand how other operations might gain from it. IMO, gently used 2wd tractors are some of the best buys on the market because they deprecate quicker, and cost less from the start.
Yeah good points👍 thanks for the comment!
massey ferguson 135 2WD 45hp or compact tractor 4WD 20-25 hp? use for plowing 10 acres.
I prefer the 4wd Kubota Grand 60 series tractors. My dad has a MF 383 and a MF 275, both 2wd. He wishes that the 383 was 4wd since it has a loader on it. So far this year, I have only had to pull him out once with my Kubota. Although comparing my Kubota to his two tractors isn't a fair comparison since both of his our larger than my Kubota L3560HSTC. Yet, mine being 4wd and lighter has allowed me to get into places where his bigger tractors just sink down (we have been doing work around the creek bottom and it has been a wet year). As it was pointed out in your video, if you know the limitations of your tractor and work within them, you are going to be successful. If you don't work within them, just make sure you have a second tractor to pull you out. :)
Yeah thats right. Those Kubota's are strong machines for sure. Good thing dad has you to pull him out when he gets stuck👍
My 2 cents on it is maybe without a FEL but front weights instead cutting hay/rough cutting in a pulling type role on flatter land seems more suitable. Guessing a FEL is okay on flat ground just on an as needed occasion is okay with 2wd. That FEL would be hard on that front end if continuously used. Better suited for 4wd. Otherwise a 2wd has many applications.
Good comment. Thanks brother 👍
4wd loader 4045. I wouldn’t want another tractor made by Mahindra or any other color. It’s engineered perfectly.
They did do a good job on this one for sure. Thanks for the comment 👍
I think that is a beautiful Tractor. Like someone said below in the comments there is not another Mahindra Tractor I would consider in their line. My preference would be 4540 4 WD. Great machine for the money. Real winner.
Hank, when you become rich and famous, don't forget us little people .
🤓 Mark.
Lol. You got it Mark. 👍 I appreciate you being part of the community. You're an "OG" on my channel. I'm grateful for your support..
I just bought a used 2018 4540 4wd with a loader, box blade and bush hog with 300 hours on it for $17,000. I needed it for a Lane Shark so I also added their third function kit, and those 2 added another $7k to it. So I'm in it for 24 and have about a mile of roads with trees to trim, and 3 miles of fence lines to maintain. I'm told once I find the gear that works best for that job it will take me hours instead of days🤷🏻♂️
You got a great deal and great Tractor.
Hey mark!
@@HamiltonvilleFarm hope you are well sir. I miss the Hamiltonville Farm 4540 videos. You loved that Tractor. I was so close to buying one because of you. Ended up with 2 LS Tractors and a 50 hp JD. Take care brother.
I’ve been looking for a good priced 4wd, it’s hilly here in se Ohio, but probably going with 2wd and chains for winter due to $
Thanks for watching
Great video Hank! Definitely helpful information for new tractor owners, thanks for all of the great videos! Take care my friend!
Thanks buddy
Derrick has a very nice Tractor. Nice Farm. Derrick is a big dude I bet he could turn that Tractor over. Great video Hank. Mark.
I kept asking him if he wanted to arm wrestle and he kept saying NO. 😂😁
I have 4WD Mahindra Max XL 28, My property is hilly. I leave my tractor in 4WD Low majority of the time. The only time I use 2wd is when I move down the road.
4wd works great on the smaller frames don't it👍
Sliding Mesh Trans are Proven and will do the job they are just not as user friendy in the long run but any good operator will make them work well . I am suprised that hes got a 2 wheel drive tractor and not one with Front assist like most are . In my applications of heavy large acre work its no contest the 4 wheels will avg a good 1 mph faster which results in more work done and less fuel burned since all of todays tractors are designed to be 4 by 4. And up til about 20 years ago most 4 wheel drive tractors did not work well in Row crops . But if you look at the tractors made today they have figured out a lot to make them track rows. They raised engines to sit up higher and also made the Front Radiator sit ahead of the front wheels for better Turning and weight Dist plus most frames were sculpted for the wheels to turn in the frame without rubbing
Good comment AJ. Thanks for the insight. Always look forward to reading what you have to say. 👍
Exquisite video Hank! That beer roll is looking really sharp! Very well done my friend!
Gotta love that beer roll😂😂😂. Thanks buddy. Gotta love auto correct 👍
Derrick get you a pallet fork. You will love it. I got the same tractor. Also built a nice carryall box like diymyway built here on RUclips. Very handy.
👍
Great video. I say if you can afford a four-wheel drive you won't regret it. Better to have it and not use it than to need it and not have it. I have a two-wheel drive for my hunting club and find myself and situations where a four-wheel drive is really needed
Yeah I hear ya.👍
Nicely done, Hank. You're really getting this interview role down pretty dang good. So, I'm wondering...am I going to see you on Fox News next? 😊 Great job, brother. Full-watch.
LOL. Derrick was easy to talk to ! Thanks for watching. I appreciate it.
I went with the 4 wheel drive.
You’ll regret not getting the 4WD but you’ll never regret getting the 4WD.
What tire pressure do you use? I have a Mahindra 4540 2 wd. Thanks.
my uncle had this tractor and and john deere 3032e i think he sold the mahindra im not sure on the mahindra whenever he disced with it he would often spin a lot but hey its a good tractor and its a 2wd not gonna complain it gets the job done also idk if you know this but you got two levers on the right one to let implement down and another to make it go further into ground and my uncle would have fun on it like locking the brakes up and trunign sharp making it spin the wheels it was pretty hilarious
Lol. That's cool👍
I have a 2 wd that is hard to keep from grinding gears please help.
That’s a standard Mahindra issue for every 4540/4550 You just gotta find the sweet spot.
Have the 2wd also the only thing I've found to keep those gears from grinding is throttle all the way down. Wait a little bit then shift gears.
I vote 4wd!! We cannot do hardly anything here on our sloped land, especially if it’s wet!
Right on👍 you need a 4wd on your "farm" for sure 😂. .....that always cracks me up. JM....it's a farm!!!!
I almost got him to admit it on tonight’s video!! So funny!
One of my properties is basically flat pasture, my other is hilly with a flat ridge on top. Looking at a 2wd 4025
Right on 👍
@@HamiltonvilleFarm wow quick reply! Thanks for the mahindra videos, its pretty much sold us on the 4025. Also the dealer seems great
@@HamiltonvilleFarm also just saw yhe John 3:16 at the end. GOD BLESS YOU AND YOUR FAMILY IN THESE TIMES
Big like my friend 👍👍
John, your comments always go to my spam folder. lol. Doesn't matter if you say "hello" or write a 500 word essay in the comment section. Every time, wonder why that is? lol Anyways, I know I can always find your comments there. Hope you have a good day buddy.
Mahindra 🇮🇳❤️🇮🇳
Very good video! I was always told. If you get a FEL make sure it's a four wheel drive!! Have a good one!!
Thanks for the comment John, Hope you have a great week!
I prefer the 4X4 in Maine
Yes sir👍
Lookin good lookin good, great info right there!!!!!🍒🍒
Thank you Larry. Thank you for watching.
4 wheel for what I use mine for.
yes sir. 👍
I think 4wd where I'm at would be better
Yeah I hear ya. Definitely got to make your decision based on your particular needs👍
@@HamiltonvilleFarm yeah hills wet spots
2 wheel drive
right on big man!
4wd like the extra traction.
Yeah there's that. Especially depending on the tire type. Thanks for comment👍 I appreciate it
Another great tractor video Hank
Thanks Joey. Hope all is well.
🥾🚜
whoop whoop
Uh, 4x4 in 3 words... Mud and snow🤪👍 also you stop eating donuts after the last one is eaten🤪. As to when it’s “right” we’ll, that’s a tasty debate, hopefully a lengthy tasty debate😝👍
Lol. True and true👍
2wd looks better like old school