Trabajo mucho con cianocrilato y bicarbonato. Desde que lo descubrí se lo enseño a todo el que me quiere escuchar. Los resultados superan mis expectativas la mayoría de las veces. Cuando la situación es tan difícil como la del vídeo intento reforzar la pieza con pequeños trozos de alambre, vástagos y todo lo que se me ocurre. He arreglado piezas inverosímiles y sobre todo piezas cuya reparación no es posible de ningún otro modo. Os animo a probar este método y a experimentar con otros aglomerantes. Casi todos funcionan. No probéis con sal.
😮😮😮 Naaaah es la primera vez en mi vida que veo algo así!! Sos un crack pero mal!! Estoy mirando tus videos soy madre soltera, estudio y aprendo todo lo que puedo, desde electricidad hasta plomería y vos me dejaste con la boca abierta!! Tenes mis likes asegurados en todos tus videos y ya suscripta desde que vi el primero!!😅 GENIOOOO😊🎉 Miiil gracias!!🫂💓
For 60 $, you can buy a plastic welder that comes with everything you need. I use it as a mechanic, and around the house, it paid for itself in the 1st week.
If its like the crazy glue I still have on my fingernail, after using nail polish remover, alcohol, gasoline, carburetor cleaner....and its STILL there....
Very good; should have imbedded small copper wires first, forming a circle,with a soldering iron,if forces will be involved there; I epair laptops and the case,the screw posts, and the hinges i repair similarly; it stays stronger than the original; i do overdo it, where it is feasible; the cianoacrilate + baking soda is amazing; sometimes i reinforce the repair with a small net or with small copper wires where needed and possible.
Surprisingly it works pretty well. I've seen a couple of automotive channels use this technique not on motor parts but on different plastic parts in a lot of different situations. I saw the results and you'd be surprised how strong and well it works
@@lionellosanti Right. As a matter of fact I just mentioned this process to a truck mechanic neighbor of mine who was showing me this plastic part he had to replace. He couldn't get the exact part but the one he got wasn't fitting right. I told him about this simple solution and how strong it was and he was a skeptical at first but when he saw the videos and then Googled it himself he was pretty surprised and very optimistic about repairing the original piece👍🏼
@@andreilucian10 I'm not sure if it was this video or one of the others I saw that mention different substances can be substituted for baking soda. It would be interesting to see if plastic powder would work. Maybe you can run an experiment using it and post the results
How do I repair a car cabin radiator nozzle? The material is fibre-filled PP and it has to withstand a temperature of over 100 degrees... If that's impossible, you'll have to dismantle the whole dashboard to change those bloody plastic nozzles...
Они наивные думают что им показали супер способ, просто им самим не приходилось таким способом клеить. Склеил и положил на полку, чтобы не развалилось. Не встречал ещё такого клея, только пальцы отлично склеивает!
Я пытался "починить" пластиковый контейнер с большими трещинами и отсутствующими кусками. В основном восстановить структуру помог мебельный степлер, но это тема также отлично сработала, даже на угловой полусферической детали которую никак иначе было не укрепить Думаю лучше б было впаять скобы от степлера но паяльника нет а без него не получилось
Uma peça nova deve custar menos que o bicarbonato e a cola instantânea, que vão fazer um reparo sem resistência ideal, pois os pontos de ancoragem do reparo, não oferecem resistência, pois a peça é milimétrica, e tem pouca espessura de contato.
Yeah that 8 seconds of drilling costs an arm and a leg, ESPECIALLY on a rechargeable. So, youobviously know what that part is. What is it, and hide much would it cost? Asking for a friend.
Жидкость это супер клей Циакрин. А порошек это пищевая сода. Можно ещё трещины отверстия заполнять ватой и мочить её клеем. Внимание!!! Исключить попадание на пальцы. Клеит намертво!!! Если случилось смочите места склейки уксусом. Удачи!!!!
Ese trabajo no dura mucho ni aguanta nada si lo cuidas bien sin forzar nada, es como de un mes a dos meses, ya después como qué pierde resistencia y se desmorona con cualquier. En este caso es como para atornillar y donde comiences a apretar se quebrar el truco. Aguanta más el plastiacero y se quebra si se aprieta de más.
I tried it, but it didn’t make the same sounds
😂
😂😂😂
😂
Hahahaha
Thats cause you did it wrong!!! 😂
Super glue a small washer over the hole, quicker and less work and just as effective.
But did you add the cool sound effects?
You're right. If there is no space, weld a washer (cut out as big as neccessary)
Sore loser . !!!
Brilliant idea you gave. Better than the one in the video!!!
Arguably better
Trabajo mucho con cianocrilato y bicarbonato.
Desde que lo descubrí se lo enseño a todo el que me quiere escuchar. Los resultados superan mis expectativas la mayoría de las veces.
Cuando la situación es tan difícil como la del vídeo intento reforzar la pieza con pequeños trozos de alambre, vástagos y todo lo que se me ocurre.
He arreglado piezas inverosímiles y sobre todo piezas cuya reparación no es posible de ningún otro modo.
Os animo a probar este método y a experimentar con otros aglomerantes. Casi todos funcionan. No probéis con sal.
Ce qui va bien c'est la mine de crayon noir pour dessin...essayez ça va très bien 😊
@@henrivandewalle2494
Gracias. Lo probaré. Además muchas veces es más conveniente el color negro de la mina de lápiz que el blanco del bicarbonato.
Pq Sal no ?
@@userok321
Pues no lo sé.
Sé que no porque lo he probado pero no sé la razón.
También he probado la arena de sílice y también va mal.
Cuál es el pegamento que usa? Que nombre tiene?
😮😮😮 Naaaah es la primera vez en mi vida que veo algo así!! Sos un crack pero mal!! Estoy mirando tus videos soy madre soltera, estudio y aprendo todo lo que puedo, desde electricidad hasta plomería y vos me dejaste con la boca abierta!! Tenes mis likes asegurados en todos tus videos y ya suscripta desde que vi el primero!!😅 GENIOOOO😊🎉 Miiil gracias!!🫂💓
For 60 $, you can buy a plastic welder that comes with everything you need. I use it as a mechanic, and around the house, it paid for itself in the 1st week.
Can you also fix broken missing parts? Cuz i have something that is veri small i don't know if i can donit with baking soda
2ヶ月前位に車のミラーカバーが割れたので参考にさせていただきました。ありがとうございます。
最後はブラックのスプレーした方が良いのでは?
epoxy works too
I use cigarette ash mixed with super glue. The best ca glue is the cheap ones from harbor freight.
I'm worried about the strength
Yea?
If its like the crazy glue I still have on my fingernail, after using nail polish remover, alcohol, gasoline, carburetor cleaner....and its STILL there....
Very good; should have imbedded small copper wires first, forming a circle,with a soldering iron,if forces will be involved there;
I epair laptops and the case,the screw posts, and the hinges i repair similarly; it stays stronger than the original; i do overdo it, where it is feasible; the cianoacrilate + baking soda is amazing; sometimes i reinforce the repair with a small net or with small copper wires where needed and possible.
bro is the type of guy who would fix everything with baking soda and super glue apparently
If it needs to mimic plastic, yeah. That's all they make anything out of, so it's pretty welcome.
Will it fix my relationship?
ステンレス線などで補強をしましょう!
El cianoacrilato adhiere sobre polipropileno?
これは重曹+接着剤で修復されていますか?
その通りです。
Eso es lo que usa el video.
It's also quicker to make the same part with a piece of iron sheet
Sobre qué material lo colocaste para que No se pegue. O se despegue con tanta facilidad? Es cuero?
Wax paper or parchment paper, either will do.
Durability time: 2.75 seconds
Surprisingly it works pretty well. I've seen a couple of automotive channels use this technique not on motor parts but on different plastic parts in a lot of different situations. I saw the results and you'd be surprised how strong and well it works
@@mhern57 yes it's true, cyanoacrilate plus baking soda produce a strong bond
I wonder if we change the baking soda with plastic powder will last longer?
@@lionellosanti
Right. As a matter of fact I just mentioned this process to a truck mechanic neighbor of mine who was showing me this plastic part he had to replace. He couldn't get the exact part but the one he got wasn't fitting right. I told him about this simple solution and how strong it was and he was a skeptical at first but when he saw the videos and then Googled it himself he was pretty surprised and very optimistic about repairing the original piece👍🏼
@@andreilucian10
I'm not sure if it was this video or one of the others I saw that mention different substances can be substituted for baking soda. It would be interesting to see if plastic powder would work. Maybe you can run an experiment using it and post the results
En cuanto apriete fuerte se casca
Pamuk dene birde daha sağlam liflı olduğu için
Nice 👍🏻 But I prefer printing
Você tem impressora? Que lindo, falou isso só para se mostrar? Parabéns, pendure uma melancia no pescoço, fará mais efeito.😂
Jerry rig is all they do 😂
Afro Engineering 😂
車のバンパーに使用した事あります。その後破損しなかったため強度は、あると思います
マジで!?!?
接着部から、また分離しない!?!?
This is a common technique. The baking soda causes the super glue to kick off a thermogenic reaction. Be careful, it can get very hot on the fingers.
eu faço com algodão fica muito forte
I’ve seen similar methods used to repair guitar nuts
元の形には戻ってるが強度はどうなんだろう
How do I repair a car cabin radiator nozzle?
The material is fibre-filled PP and it has to withstand a temperature of over 100 degrees...
If that's impossible, you'll have to dismantle the whole dashboard to change those bloody plastic nozzles...
that's so superficial it's only black on the outside
But it identifies as black
Go buy a new part, if you desire perfection.
I wonder why always baking soda? Surely it shows certain strength, but is it the best choice among daily materials?
Пепел от сигарет попробуй за место соды, крепче!
You must have learned that in prison
Paint the whole piece
That does not look like baking soda!
완전 꿀팁입니다
I tried it. Didn’t work!
И выкинуть эту хрень. Своих прежних функций она после таких манипуляций не приобретёт.
Они наивные думают что им показали супер способ, просто им самим не приходилось таким способом клеить.
Склеил и положил на полку, чтобы не развалилось.
Не встречал ещё такого клея, только пальцы отлично склеивает!
Всё сломается...
Я пытался "починить" пластиковый контейнер с большими трещинами и отсутствующими кусками.
В основном восстановить структуру помог мебельный степлер, но это тема также отлично сработала, даже на угловой полусферической детали которую никак иначе было не укрепить
Думаю лучше б было впаять скобы от степлера но паяльника нет а без него не получилось
Is it solid? To the eye neither perhaps but to hold a plate or other the glue breaks immediately.
Will probably hold but a 3d printer could make that whole part in less than 30min
not everybody has a 3d printer in their pants
I’d just use JB weld , it’s a lot faster or All metal auto body bondo
Pake serbuk kopi juga bisa min ama tisu
Thank you . !!!
하지만 내구성은 보장하지 않는다
Glass fibers and carbon fibers, maybe?¿ someone with lots of time can experiment.
👌👏
んー。片方にまともなやつがあるから、粘土か何かで型を取ってそれで作れば面倒な事しなくて良いのに😅
👍👍👍
How about using styrofoam instead of baking soda
Uma peça nova deve custar menos que o bicarbonato e a cola instantânea, que vão fazer um reparo sem resistência ideal, pois os pontos de ancoragem do reparo, não oferecem resistência, pois a peça é milimétrica, e tem pouca espessura de contato.
Pafino y Que pegues esa Gracias por eso bendiciones☺️👍
I give waterproof
Who came here to confirm that it was superglue ⬇️
UPS...otro genio cerebrito..😮😢😢
I call bullshit on this one!
It works, I use it all the time
@@sola2140cigarette Ash works the same.
Esto, y na, es lo mismo. Un engaña bobos
You also are an awesome Idiot and Thank you very little Arti
Is the repair as strong as the original piece?
Eu comprei um novo pra garantir..tanto trabalho para. Fazer uma gambiarra que não presta 😂😂😂
Wow what a craftsman
Проще из трубы сделать канализационной феном нагреть и деталь вырезать
I'd rather buy a new one
I tried it, it's work
wtf bro?? 🤬
Awesome😮😮😮
The price of time and electriccity is more then the new one
Yeah that 8 seconds of drilling costs an arm and a leg, ESPECIALLY on a rechargeable.
So, youobviously know what that part is. What is it, and hide much would it cost?
Asking for a friend.
Gyors és hatékony!
I used a different colored marker
Cotton provide a stronger option
Excelente 🎉👌
Это не на долго
I use bird guano and spit.
Кто пробовал? Тема или фуфло?
Parabéns pela ideia! nesse mundo que vivemos, muitos pensão em trocar ao em vez de concertar.
Cómo se llama el material que usa para restaurar o reconstruir?
Cuando es una pieza sujeta a tensión mecánica esa reparación no es la adecuada
Эта лажа треснет при нагрузке. Напишите лучше пластмассу и сделайте отверстие
Kidding???
فكره فاشله
هى تمفع فقط اذا اردت ان تحتال على احدهم وتبيعها له بعد معالجتها بهذا الشكل
But the repair will not stick properly to the original plastic. Sure!
Yep, it's way too big a repair - any tension on it will snap it off - I know I've tried similar before!
Que geniallllll seria cómo hacer una una jajajajajaja!
А что за сыпучее вещество и что это за жидкость? Может, вам это и очевидно, но я не знаю. Подскажите, пожалуйста.
Жидкость это супер клей Циакрин. А порошек это пищевая сода. Можно ещё трещины отверстия заполнять ватой и мочить её клеем. Внимание!!! Исключить попадание на пальцы. Клеит намертво!!! Если случилось смочите места склейки уксусом. Удачи!!!!
Lisez les premiers commentaires
Hi they say use crazy glue with baking soda
Жидкость - это суперклей; порошок - пищевая сода
GRP has left the chat!
La verdad no, si es algo roto así, se remplaza la pieza y listo
no hay pieza nueva,tiene que soldar a
@@josepeixoto3384 como va a soldar si es plástico 😂
Ese trabajo no dura mucho ni aguanta nada si lo cuidas bien sin forzar nada, es como de un mes a dos meses, ya después como qué pierde resistencia y se desmorona con cualquier. En este caso es como para atornillar y donde comiences a apretar se quebrar el truco. Aguanta más el plastiacero y se quebra si se aprieta de más.
😂 yo pegue con Moco 😢 y es mucho más efectivo 😅
Parece q le hecha plastico en polbo y gota de pegamento fuerte
Funciona mejor el grafito con cianoacrilato.
WoW este el video es muy útil
Una pieza de hierro debe ser reparada con hierro soldado al arco y no engañarse con pegamento eso es cosmético no sirve para nada
it's not the same material, not stable
What paper was it placed on ?
I'm going with parchment or all natural wax paper ?
Na papierze czerpanym.
Y hay que adivinar si es sal y otro producto....y qué más....parece interesante,, pero es para adivinos
"Baking soda " ?
Sucre et colle cyanoacrylate.
Non. Pas sucre. 'Baking soda' c'est le bicarbonate de soude / levure chimique.@@dupaysmetm
@@eekamoose
Merci à vous de rectifier mon erreur
@@dupaysmetm Je vous en prie 😁
@@eekamoosethe description says "baking soda"
Type de plast?
見た目だけ『治った』としても・・・😑
Or just don't break it
Excelente
刃の持ち方危なすぎやろ(笑)
sal ¿Porque no fundes plastico? quedaria igual y no andarias con sal que atrae la humedad.
Es Bicarbonato, No sal.
Que es el polvo que le pone
Baking soda
Bicarbonato de sódio
Bicarbonato de sódio
What was the first thing he put down
Maybe sand
Looks like the same container as the baking soda, so I guess that.
Baking soda, glue, baking soda, glue, then baking soda.
Was ist das für eine Reparaturpaste?
強度的に足りるのか??😅