How to remove trim on a back of VW Sharan (7N, Seat Alhambra). Access to rear blower and door motor.
HTML-код
- Опубликовано: 3 июн 2019
- Video shows removal of VW Sharan trim panels, pillar trim etc.
Here is the link to relevant page at our website (also available in printer friendly PDF format):
www.wheelsandmotors.com/manua...
More stuff about this car - see my website:
www.wheelsandmotors.com/ 
Авто/Мото
Hello. Your videos are very helpful and have often helped me with the 7N. Recently, I had a strange noise in the air conditioning train on the back right. The noise is only present in the air conditioning. It's all right in the heat mode. Greetings from Germany
I don't have any experience yet with AC system at the back.. All I know is compressor and both blower motors.
I may be wrong (I'm not a mechanic), but noise I would blame on a blower. I can control rear blower by switching REAR button. Maybe try to play with that to see if it's blowing that's noisy. If it's not, then I don't know. I can recommend good Facebook group, try asking there, check this link:
facebook.com/groups/1463201880401563/?ref=share
Hello.I have the same problem. Did you solve anything in the meantime? With the strange noise on the Back right!
Thanks a lot. Big help in getting the trim of the other side!
Thanks Jon 👍
continue like that .. I like this gentleman
Thanks boss 👍
Very nice as always :) .
Can you please make a video about how to replace the drawers in the roof..I would really appreciate that.
Thanks Paulo.. When I'll find time - I'll do it. My Mrs was in London last couple days, so I had to stay with kids and had time to process these few videos.
But I will bear in mind - drawers in roof.
Very nice, thanks for your help!
Anytime 👍
Very nice work
Thanks 👍
Hi there, thanks for the video. Its been very helpful. Any idea on why the heat matrix pipes are cold in my car? Looks like the coolant is not running till there. How can I check? Many thanks
Sorry Bruno, I don't have any experience with the heat .matrix yet..
very good video…can you say if you also have a problem with your display for the fuel…i have i think a problem with the fuel gauge
Thanks! The fuel gauge does behave funny sometimes, and it's quite common. I think it has something to do with dynamic calculation of the range. That's why when there is like quarter of a tank, it can suddenly drop to low and then build up again.
@@wawayltd i appreciate your helps…greets from Berlin. Last question: is there a way to get there…thx a lot💪
Sorry, I have not been there yet. I have a video about Skoda Octavia fuel pump.
Thank you very much. Like. :)
You're very welcome 👍
Como tirar as laterais da mala onde apoia a embaladeira
Hi, I want to ask about this fan. When I release it to the maximum, it blows quite weakly. It cannot be compared to what is in front. I don't know if that should be the case. Thanks for the info
Hi Roman, I don't know. Mine is also weaker than front. But I don't know how weak is yours. Not sure what could be the problem, there's no filter at the back to be clogged up.
@@wawayltd Hi, many thanks for the reply. I'll have to compare it to the same car model. Otherwise, thank you very much for your videos. They have helped me many times. Yeah, and one more note. When changing engine wiring, I often had a problem replacing grafts. I always succeeded, but it delayed me a lot. Now I bought a product that will speed it up a lot. Have a nice day. www.triumfcz.cz/vytahovak-steftu-1-2-pro-pr-8-mm-1
Cześć, robisz świetne filmy, może byś zrobił film jak zamontować oryginalny hak do Sharana z podłączeniem modułu i wiązki, bo nigdzie tego nie mogę znaleźć.
Спасибо, брат, за приятные слова о моих видео ;) Może zrobię to w przyszłości, ale na razie nie ma czasu i potrzeby. Ale pomysł jest dobry - dzięki!
the rear fan of the blower in the trunk on the right-hand side no longer switches off. Is there an easier way to solve this by pulling the corresponding fuse? Is there a separate fuse for this? No one has been able to answer this so far.... THANK YOU
Fuse 52 in drivers fuse panel (RHD)
Hi,
I have seat Alhambra 2017. one Automatic door makes to much noise .when I open or close.
I went to dealer they said need to replace door motor that will cost me £995. did any of you face the same problem?
Thanks
My car has done 326.000 miles - still same door motors. And it's a taxi - doors are opening many times a day.
But it's hard to say for me why your motor is noisy... Try to check with independent specialists?
Hi, il love your videos, very helpfull and well explained. What is the symptom of your rear blower fan failure? I have a problem with mine, it just never stops and drains the battery even when key is removed and car locked... Very ver annoying. Maybe there is a relay somewhere, but is it inside the blower itslef?
Sorry, I have no idea why it keeps running. My problem was simple - it died, I replaced it.
It's beyond my competence, sorry...
@@wawayltd no problem, thanks for the response!
@@marcgx465 Hi I have the same problem. Did you fix it? And if, how?
@@alphubel1000 yes, fixed by replacing the blower resistor close to the blower. Found on amazon. Easy to replace thanks to this video.
Reference of the part is 7L0907521B.
Hello
I wonder why the heating of the rear part of the car is not working for me. It only blows cold air
I had the same problem. I didn't work it out. Now, the car is gone together with that problem :)
Try asking on Facebook groups, like this one:
facebook.com/groups/1463201880401563
So I have to do this if I wanted to change the rear shock absorbers?
Not sure yet, possibly, I don't have experience with rear shocks yet, sorry.
@@wawayltd is the rear shock mount visible when you remove the cover?
@@AMGGish I didn't pay attention, sorry. Funny enough, just on Monday replaced that rear blower, still don't know. Narrow vision 😎
Hi.do u know where is the rear parking buzzer for sharan 7n? Is it in the right back trim?
Sorry, no idea... and I've lost my manuals for Sharan.
Any idea where can we get the service manual?
This one is very good. Probably best use it via computer:
erwin.volkswagen.de/erwin/showHome.do
Hello, can i install seatbelts at back 2 seats ? I bought 7seats but didnt had back seatbelts. Thank you
All seats must have seat belts. I didn't pay much attention to how they connected, but I'm pretty sure that if you remove trim, it should be not too difficult.
@@wawayltd Yeah i asked previous owner and he said it was 5seats and he installed back 2 seats and when i checked after it didnt have any belts in the back. So belts can be added also? Thank you
@@mongol9793 I believe so, but I don't have experience with them yet. Does trim have hole and holder for seat belt?
I think such specific parts can be ordered from dealership, or you can have a look at car breakers.
@@wawayltd no there wasnt any hole in back trim and in the seat also. But in the seat can be installed there was bolt holes.
@@wawayltd Hello, WAM i have question. I found same year seat alhambra seatbelts. Do you think it will fit? The trim also. Thank you
Привет,а где там радиатор?Есть еще какая то причина почему задние ряды обдуваются холодным?
Извини, но с радиатором не имею опыта. Да и машины этой у меня больше нет..
Hello, i bought belts and do i need remove whole side panel or just the top one ? Thank you
3rd row seats
Sorry, Mongol, I don't remember how deep it went under trim. Top panel is easy to remove, try that and if you see that that it goes deeper - remove big panel.
What was not working on yours
I think this is just a "how to video". It seems to work fine :)
This video is proper mixture :) I started filming it couple years ago, when I had problem with electric door, I thought it's a motor. It appeared to be problem in door sensor. Then, year later I had problem with rear blower motor - I had some files how to strip it, so I used them, but finished video in different country and different haircut year later :)
I did have problem with the blower, but we cleared it with air compressor and it seemed to be working fine. Now it's not good anymore, so I want to get new one eventually.
I have put all files together and made this video, because of some guy on my Facebook group, who wants to know how to strip trim to install wiring for camera at the back.
That's the story..
Thanks for sharing.
did you hear something from learning and teaching?