According to these baseline numbers and others I’ve seen online, this engine is rated very conservatively. 270hp with a low 20% driveline correction puts the 5.0 Cummins closer to 324hp and 648tq......
Drives like it too. I want to tune mine myself but I don't know enough about the fuel tables yet. However the table appears to call for a little bit over 700ft.lbs of torque, some of that is going to be lost to the engine itself before it even makes it to the transmission mind you.
Nest LIAM, where we picked up was in the lower horsepower and torque curve where the truck needs it the most. We picked up 48HP to the ground (~57HP Flywheel) and the torque numbers are a very close estimate of 96lbs to the ground.
Our products are tested on stock applications, however we do have many customers use them on deleted vehicles. We do offer a 30 day money back guarantee on the product. Thanks!
How are you guys able to make the same hp/torque as some competitor module without touching the boost levels? The "other" modules adjust boost levels to make more power and yet you only adjust "fuel" levels?? You add more fuel, one would think you would add more air but no??
SPNFENDER, good question. Yes, some of our competitor modules use the MAP sensor and adjust boost if will. The thing is, there is a window of adding fuel and getting the horsepower/torque with the factory turbo flow rates without having to change it. With our modules we try to keep your truck running as factory as possible to get you the horsepower/torque. When we started the development with this module, we found that the factory flow rate was just fine to add fuel only and not have to mess with your turbo to get the performance. I hope that this answers your question, if not, please give us a call and we can talk about it further. 812.618.9168
Ag Diesel Solutions Thanks for the reply. Ordered one from parleys diesel, received it next day air for free looks like a quality unit!! Am not having any luck getting the plugs connected/disconnected what a PITA where cummins had to put this plug, nearly impossible. Thanks, look forward to it once I get it installed.
Very glad that you where able to get it from one of our dealers! I also agree with you on the location of the plug, it can be challenging of ones patience to get it on. Make sure and check out our installation video of this module, might help you out a bit to get it put on, but trust me, it will be worth it when you get it on!
We manufacture and tune our modules here in southern Indiana, and we find they increase horsepower by about 30% and improve fuel efficiency by 10%-20% on average. If it is done properly, a dyno tune will likely improve engine performance as well.
@@abelgomez2726 dyno tuning is when someone flash tunes the ECM on a dyno to ensure that the tune is working correctly. Here at Ag Diesel Solutions, we do not do any deleting on the ECM, but we make a performance module that works with the ECM. We have an in house dyno where we test the performance of our products, so they are dyno proven as well.
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
According to these baseline numbers and others I’ve seen online, this engine is rated very conservatively. 270hp with a low 20% driveline correction puts the 5.0 Cummins closer to 324hp and 648tq......
Drives like it too. I want to tune mine myself but I don't know enough about the fuel tables yet. However the table appears to call for a little bit over 700ft.lbs of torque, some of that is going to be lost to the engine itself before it even makes it to the transmission mind you.
So what are the true Dyno results for the HP and TQ with the unit on the truck?
Nest LIAM, where we picked up was in the lower horsepower and torque curve where the truck needs it the most. We picked up 48HP to the ground (~57HP Flywheel) and the torque numbers are a very close estimate of 96lbs to the ground.
I have a question i used this product does not mean I dont need a ez link tunner if I removed my delete on Nissan tita xd
mode 3 makes smoking black??
No, no black smoke here. Fuel savings and horsepower for everyday driving and towing.
function if egr and dpf delete?
Our products are tested on stock applications, however we do have many customers use them on deleted vehicles. We do offer a 30 day money back guarantee on the product. Thanks!
How are you guys able to make the same hp/torque as some competitor module without touching the boost levels? The "other" modules adjust boost levels to make more power and yet you only adjust "fuel" levels?? You add more fuel, one would think you would add more air but no??
SPNFENDER, good question. Yes, some of our competitor modules use the MAP sensor and adjust boost if will. The thing is, there is a window of adding fuel and getting the horsepower/torque with the factory turbo flow rates without having to change it. With our modules we try to keep your truck running as factory as possible to get you the horsepower/torque. When we started the development with this module, we found that the factory flow rate was just fine to add fuel only and not have to mess with your turbo to get the performance. I hope that this answers your question, if not, please give us a call and we can talk about it further. 812.618.9168
Ag Diesel Solutions Thanks for the reply. Ordered one from parleys diesel, received it next day air for free looks like a quality unit!! Am not having any luck getting the plugs connected/disconnected what a PITA where cummins had to put this plug, nearly impossible. Thanks, look forward to it once I get it installed.
Very glad that you where able to get it from one of our dealers! I also agree with you on the location of the plug, it can be challenging of ones patience to get it on. Make sure and check out our installation video of this module, might help you out a bit to get it put on, but trust me, it will be worth it when you get it on!
Ag Diesel Solutions Sweet 😎
Very happy with my module! Have had it installed for a 2/3 months now. What setting should I set the knob at for towing a 8000lb trailer???
How do i get yer product
Al, you can find our products at agdieselsolutions.com or you can contact us directly at our production center here in Newburgh, IN at 812-618-9168.
That odd shaped curve is cause the transmission slipped lol
No that odd shaped curve is because these idiots showed a chart that has the rating compared to speed instead of engine RPMs.
Do you know where i can get a DYNO TUNE on my 2016 Nissan Titan? I live in San Bernardino,CA... Getting the dyno tune, will it give it more power!?
We manufacture and tune our modules here in southern Indiana, and we find they increase horsepower by about 30% and improve fuel efficiency by 10%-20% on average. If it is done properly, a dyno tune will likely improve engine performance as well.
@@agdieselsolutions793 what's dyno tune.. yes im new to diesel I will buy the module btw
@@abelgomez2726 dyno tuning is when someone flash tunes the ECM on a dyno to ensure that the tune is working correctly. Here at Ag Diesel Solutions, we do not do any deleting on the ECM, but we make a performance module that works with the ECM. We have an in house dyno where we test the performance of our products, so they are dyno proven as well.
Very underwhelming