I've been working as a diagnostic tech for 25+ years, and I'm so impressed with the width of knowledge that Jarod has. He knows his stuff about literally everything auto mechanical. Usually one has expertise in one or two areas, he knows it all. Hats off bud. 👍🏽
Anyone has the ability to know alot about alot or little bout nothing. All depends on how much time you want to spend working with the stuff, reading service information, absorbing it. The ability to decipher alot of the service information is there for the taking when if you work in a shop and every shop has service information available for makes, models across the markets. People ask me at times how do you know so much about so many brands of vehicles. I tell them all shops subscribe, pay, if dealer get it from mfr so we have to go look the proper information up. Some people just think we're geniuses. OH wait we are as long as you know how to do what the hell ur doing..... Industry knowledge, years of being in the industry you see various stuff if you hit the Indy shops...
Tips for modern diesels: ALWAYS DELETE, and if you don't plan on doing that or building the truck, then lease (or trade in before warranty is up). I'm sure this engine and the turbo assembly would last 3-4x as long as it did stock if it wasn't breathing in a bunch of debris its whole life. Also the Titan XD isnt a 3/4 ton truck, its more like a half ton (I've heard people call it a 5/8ths ton) but many people push the little titan too hard and blow it up
I agree except if they were hauling 1 car in a covered trailer it should not have been anywhere close to too much of a load. If I remember right it can tow 12k on the hitch and close to 19k on a 5th wheel.
I remember looking into these trucks, and size wise it's like a 1 ton, drivetrain is that of a 3/4 ton. But I seen the frame on it, and it's kind of pathetic. I've seen thicker frames on 1/2 tons. So yes 5/8 ton seems like the best classification.
Ok i think some follow up is due because the comments being made in this video is missing some key points here. All diesel trucks including fords, ram, and duramax will have turbos get plugged up with soot just like this when the dpf plugs. The dpf plugs because of regen issues or def fluid delivery that doesnt help burn the soot out of the dpf. To keep this from happening you do need to make trips at freeway speed for some distance and hope regen is happening properly. Additionally the 5.0l is very common in commercial applications so when looking for parts it is better to go direct to cummins dealer rather than nissan.
The before and after picture was hilarious. I think they took them 1 minute apart and just turned the lights off. [click] "see, Tavarish's bald spots are gone!!"
@@r0b3rt_959 yeah but bro you can get kirkland's minoxidil for literally 1/4 of the price that keeps sells it for. I've been using kirklands and it 100% works. same with the finasteride.
News guy: "Breaking news, severe shortage of brake cleen in Kansas, the governor has declared a state of emergency, several truckloads of Covid vaccine dumped on the side of the road in favor of bringing in the desperately needed parts cleaner..."
.... Carburetor Cleaner is Far Far more effective at cleaning the Carbon build up, it has stronger Chemicals in it... 🤔 Break Cleaner isn't as effective as Carb Cleane. You just have to let it soak overnight, to breakdown the carbon sludge that has built up. It worked on my EGR passageway.
@A-a-ron probably for the best. If you want to go diesel it's either ford or dodge. I hear some good things about the duramax but for my money I'm taking dodge with the cummins or the power stroke especially the 7.2.
Its not a Titan issue, it's a diesel emmisions issue. I have a Titan XD with the gas 5.6 and i love it. Go gas or get a 6.7L in a Ram if you want a diesel. There's a reason Nissan discontinued the Cummins engine option.
@@Snoscoot Nissan is warrantying and replacing engines for 100k miles if it does do that. I actually hope mind does it before my warranty runs out. I get a new (and updated) engine in my truck. Then I should be able to get 350k miles out of it instead of 250k.
@@Snoscoot yup ..... all 8 of mine excused themselves is been at Nissan for 2 weeks now.... cylinder 5 & 7 are the worst and it only has 43k oil changes on time
Jared: Thanks for the help Wizard, how much do I owe for taking up shop space? Wizard: Nothing Jared: Thanks man! Wizard: Here's your cleaning bill >>Hoovie faints somewhere
That comment is very funny... wiz is not stupid... every time hoovie gets a estimation, how much his "cheapest of everything" cost... wiz always shows, what he will buy for the money... a yacht... house.. hoovie makes him rich 🤑
As a former Nissan Diesel Technician/ Master, the Titan Diesel was bad since the beginning. Turbos goings out, EGR coolers cracking internally, oil leaks from the upper oil pan, DEF pump failures, and also the injectors going out
I give them mad props for even showing this. The Titan could have just ‘disappeared’ with the excuse of needing something more ‘wife friendly’ (or whatever). Good luck.
Renault group need to be called out on their bullshit parts distribution. They can't blame Covid, they have been like this for years, and now its spread to Nissan and Mitsubishi.
@@Beer_Dad1975 I`m sorry but to me it seems more like an issue with cummins making an engine exclusively for 1 vehicle that nobody bought, and than not providing the parts to keep them going when they give up on said engine after a rather short production run... Hate Renault all you want, bit I do`t think this is their fault
@@andreanastacio9548 I'd rather blame Renault... My dad owns a Megane Scenic 1st gen with 1.6 16v. It's working good but intake pipe, first one, is rather impossible to get or with price so high, that You can buy 2nd engine for it. And funny part is, that it is so common for those engines, that You can't find one on scrapyard in one piece. At least it isn't necesary for engine to run. :D
@@andreanastacio9548 That makes no sense at all - Nissan sold the vehicle and therefore have the responsibility for supporting the customer - I'm not sure if Cummins supplied the turbo system or just the long block, but regardless, it's Nissan's fault if they didn't order enough parts from whoever the turbo manufacturer was to support a truck that's been out of production for less than 2 years. By your logic since almost every car on the market has multiple parts supplied by 3rd party manufacturers, no car company can be held to blame if you can't get parts for their cars unless they make the part in house. That's just not how the customer relationship works. Renault group have an appalling after market support reputation, and they are now ruining their child brands Nissan and Mitsubishi in the same way.
Thanks... Now I have something to look forward to during my 1,000 mile x 4 road trip with mine in a couple months... Chicago Illinois to Portsmouth Virginia moving a z31 and an e30 two separate trips.
Jared is just A Machine when it comes to working on those really hard jobs! Jared has raised the Titanic! Congrats! It promptly sunk slowly to the bottom. The budget does not include raising it again.
@@Daemonarch2k6 You know that the intakes on diesel engines with EGR are supposed to be cleaned thoroughly every 150.000Km to avoid problems like this one right? It's basically considered maintenance. One that most people don't do until the car has problems. It's because of the EGR and FAP and all that crap, but the EGRs have been around for more than 20 years now. On gasoline engines is not as bad as with the diesel ones, but it still gets dirty and cause problems. I wonder how that truck was driven, because normally it's because people drive like old grandmas all the time and causes that build up. Nonetheless, since the FAP was introduced diesel engines have suffered a lot of problems. The part about not getting able to find parts... where I live the makers must provide spare parts for 10 years after the model is no longer produced. I bet they could get parts, but not on time or too expensive. 🤷♂️
Hi Jarid and Tireach nice truck 🚚 🛻 and workmanship!!! Love the truck 🚚 🛻!! Maybe there was a clug still in there after start maybe that why it did not smoke or old gas from old shops !! If u still got it give it a fuel injector clean and what u still provided !!!
possible, but I don't know. I think if Ram had used this engine their would be a lot more parts on the market since Ram moves more trucks then Nissan (I think) so I feel repairs would be easier... however as far as the original issue that caused it.... well yea if you look at it like that, I could also see why Ram gave it a hard pass.
try using archoil from powerstroke specialty, it tends to help a lot with coking in diesels with dpf and scr systems. I use for all of my fleet and it has been great. Also, I would see if you can manually do a static regen, in order to burn some of soot and carbon out of the DPF to reduce the backpressure in the system.
This isn't just isolated to the Nissan, this is an issue with just about every diesel truck currently sold in America due to all this emissions crap that choke the hell out of these engines
As someone who lives next to an emission deleted diesel truck, I’m very thankful for emissions. My neighbors truck makes my whole house smell like diesel. And that’s one truck, imagine if every vehicle didn’t have the emission “crap”. We would never have clean air.
@@erikkarlonas180 and that’s exactly why I’m thankful we have the EPA. Immaturity and pure disregard for other people’s well being. It’s always the immature people who make a bad name for diesel truck drivers.
@@Hempujonsito I have told the guy but he doesn’t have any options. There is no where else for him to park and he has to let it warm up to unthaw his windows. Only option is for him to spend thousands to put the emissions back in. Do I expect him to do that? No. But I glad cars have emissions from factory.
As a shop owner and we specialize in diesel I’ve seen it all. The new lp5 Duramax trucks are trash, the 6.7 Powerstrokes are trash and the Cummins has it’s issues but is by far the best mechanically in the Ram platform. We don’t have any customers with the Nissan but 3 and all 3 have been flawless so far.
its just bad engineering, from the crankcase vent that dumps oil into the intake when the engine is under load (its supposed to only take oil vapour but dirty oil foams up under load) to the EGR that fills the intake with carbon deposits, to the DPF/cat that gets dirty and over heats the oil in the turbo, the dirty intercooler can't keep up, intake temps go up, EGTs go up ... and its downhill from there
Holy shit... Dumping oil into the intake is an incredible fuck up. I'm surprised they weren't recalled to be honest, that's obviously going to destroy these things over time.
@@gingerd2098 its a common practice in turbo diesels, mine would suck up oil from the vent when the air filter gets dirty, the dealer said a gallon of oil in 2000 miles is within the acceptable oil consumption, they even showed me the service manuals (1 liter per 1000km)
I know that most modern diesels gum up like this. I have read that it has something to do with the type of oil used with the DPF filters. The older oils weren’t as much of an issue with the engine but would plug up a DPF filter. The modern oils, even though they are synthetic really need to be changed at 3000K mile intervals because of the sludge they produce.
@@slowdaze more about the soot content in the diesel and how often and how hot you can get the CAT and DPF to clear them, its just the wrong solution for the problem, from EGR to DPF and CAT, you're trying to solve the emissions of incomplete combustion, lean produces NOx, rich produces fuel particulates, so its all about having the right tune and keeping EGTs in check, also they need to control the flow of air instead of react to it, its just bad engineering from the start
Agreed, right in the feels cause I bought one too. A sweet deal, 2018 with only 13K miles on it, just turned 22K. Now I know what I have to look forward to. I'll have to start planning on offloading it by the 80K mark, I guess....
@@shamanosarcasm9800 hopefully in the meantime Nissan/Cummins can figure out the issue and/or produce more spare parts so you won’t have to. I doubt Cummins wants the negative attention...
I have considered getting the Titan with the 5.0 diesel but this video confirms my fear. I just can't bring myself to getting one of these, just seems like a headache.
It's so awesome having you both on the show. You guys rock. I never go on RUclips to learn something I always seem to learn something from Professor Jared.
I had the 2016 version of this truck, and had the linear actuator that operates the turbos fail as well. Went to my local dealership in Portsmouth VA, and there were none in stock. Called down in Florida and had one overnighted to me. Swapped it (took it to the dealership to program the limits) and it was good, for about 700 miles. Started hearing some weird noises from the turbos and didn't want to chance it. Found out back then (June or July of 2018) that they were on national backorder, and CFT hadn't released their single turbo setup at the time. Next day I traded it in on a Tundra. I miss the comfort of the truck, but glad I got rid of it.
so instead of particles coming out of the tailpipe and ending up on the ground, they now build up in the engine, cause it to fail, and still end up on the ground. Government Regulation at work.
I use a plastic tote full of about two gallons of the harbor freight heavy duty degreaser and COLD water enough to cover the parts, and then let everything soak for a day or two, maybe three, then rinse. No scrubbing necessary, and doesn't quickly harm aluminum, as long as you don't use hot water.
To be fair I have noticed a very real difference in Tavarish's hair. Before I was like "Oof, dude just let it go," but now it looks fairly salvageable. Bald looks good on Car Wizard through makes him look wise and knowledgeable.
Is the Wizard calculating a supplies and shop rental bill at 11:45? It looked like it, but he wasn't rubbing his hands together like he does with Hoovie.
Now I'm older I only buy mass produced vehicles with excellent parts availability and everyone knows how to work on them. Like my F150 and my Camry. This is exactly why, All the best to the both of you!
Jared is the best part of this channel and Tavarish's channel... Such a genuinely nice guy and super entertaining.... Sorry Tavarish, but Jared is my favourite.
@@jimbob4485 I know two people specifically who would disagree with you. One owned a rogue. 105k blew the transmission. The other one owns a Armada. Blew a little rubber line on the transmission cooler, drained all of his fluid and blew his transmission up. Nissan vehicles aren’t good vehicles.
@@FoolOfATuque so you knew two people that owned Nissan’s that have had problems. Drive by any Ford Chevy Toyota dealership right now, pretty sure there is one of their vehs on the rack with problems. I know a guy with f250 bought after my Titan that’s been in shop 4 times, my Titan has not. You think it’s only Nissan? Ok
@@jimbob4485 yeah? I also knew another guy who shredded his rear differential in his Titan, but you can believe what you want to believe. I won’t be buying a Nissan anytime soon. Will stick with companies that make good trucks.
This reminds me of the carbon cleaning that has to be done on BMW Intakes. This also explains why Tavarish is trying to fix his truck. Very glad I didn't buy a Nissan Titan. :D
3 года назад+2
nothing to do with nissan! ALL ENGINES HAVE THIS PROBLEM TODAY BCS OF EGR!! EGR DELETE AND UR ENGINE WILL LIVE FOR EVER!!!!!!
On the VW TDI manifold when they get like that you soak the inside with some brake clean and light it on fire. Once they get burning, add a little bit of air from a blow gun and watch the flaming chunks come flying out. You'll have a spotless manifold quickly and easily.
I have used Lucas Diesel DEEP CLEAN additive in my fuel. I'm an owner/operator contractor with a Detroit Diesel DD16 600HP truck. I do a LOT of idle pto time while in service. This is detrimental with soot buildup as engine doesn't build up enough heat. So far I have 15,000 hours of operation and haven't had to do any maintenance on DEF systems other than changing DEF pump tank filter. Lucas isn't cheap to be sure. But it's Hella lot cheaper than shop visits and downtime. Just my 2 cents.
That sucks that the Titan finally met its demise. Thankfully you were (hopefully) close enough to The Wizard to be able to use his shop to try to bring it back to life before it finally died due to lack of parts. Looking forward to the next video where we fully see the outcome of all of this (Spoiler: they reveal it on the Instagram account).
They build these trucks about 45 minutes from my house. I’ll go by and check the dumpsters to see if there are any parts y’all can use. Great vid! Crazy problems though...
Good scary modern light duty diesel video recording, thanks much for posting. I cannot imagine the labor charges at a dealer for this work, a few thousand to clean up that mess? Is that overheating of unburned fuel? I've never seen anything like that.
I have a ‘18 titanic with a gas motor, lost the tranny at 38k miles and truck is currently at the dealership getting a new motor with 41k ... guy at the dealership said Nissan’s are not built like they used to be. My dad had 4 frontiers and never worked on any of them, It’s a dang shame
A few years ago nissan vehicles had the highest lemon law rate among all manufacturers, I don't know if they still hold that record. Nissan vehicles always have radiator failures which turns the transmission into strawberry milkshakes, I have rebuilt hundreds of nissan re5r05a transmissions due to coolant contamination and it almost always destroys the tcm in the process.
if one non-emission diesel lasts the life of 2 emissioned motors, what the ecological impact of having to make two motors ? all of my pre egr/dpf trucks lasted longer than the later models.
Dpf, egr delete and a "tune" . Would highly recommend running a couple oil changes with engine flushes. That carbon shit can get to the oil pickup, at least it does on mazda cx5 have done a few recalls.
You should get a custom emblem made that says "Titanic" and swap out the "Titan" emblem with it. Film Jared when you unveil it to him. It would make my day.
I wouldn’t say don’t buy a Titan period, but avoid the diesel ones. I’ve heard nothing but bad things about them. Every other Titan I’ve done at work has been bulletproof, one even with Toyota level of high mileage.
In the end it really doesn't matter what engine is in it. They put a man on the moon, so it seems to me that Nissan or Cummins or whomever bears ultimate responsibility could have proven out the emission system before getting it in consumers hands. They are experts at leading men to shell out as much for one of these things as a decent house would cost, yet a slow, smoky old F250 with a non-turbo 7.3L would have already arrived home while that Nissan was still getting it's reach around. Then on top of that it broke down again! Just more of the modern campaign to convince people that things which are terrible are actually GOOD.
Redesign to future proof any diesel. Block off the factory EGR port on the exhaust manifold and EGR water cooling if it has it then run a bit of exhaust pipe and tap into the exhaust behind the DPF But before the Cat / add blue thingy and connect the pipe into where the EGR valve is so that it now provides filtered air cooled exhaust gasses and not hot dirty gas. This system is used on some Caterpillar Diesel engines. It works well providing the turbo doesn’t provide more boost pressure at the times the EGR is open than is present in the exhaust. The EGR should not be open at those times however.
Dude no, because of stuff like this the gov is trying to force through the Rpm Act. Just obey factory exhaust treatment and engineer around it. We've been running around with dpfs opfs and catalytic converts for ages in Germany, whilst in the states everbody whines about this. Engineering around is more than manageable and on a global climate scale relevant.
I want to thank you guys for this video! It could not have come at a better time, as I was seriously looking at buying a Titan XD. I even thought that if I could find a late model, it would be getting one with the bugs worked out. Guess not. I was really hoping this would be a good truck too. And who knows, it might have been ... if not for EPA mandates. I think I'll keep driving my Tundra a little while longer, and start looking for a decent gaser.
Just avoid buying any newer truck if you plan on keeping it a while. Older GM trucks are solid and pretty much any Ford's with the 6.2 are a good example of a common and reliable truck. Avoid dodges and Nissan's. Toyota makes a great truck but leaves anyone who needs a 3/4 or 1 ton in the dirt unfortunately
I was afraid that the diesel would be a bad idea, I have an 06 that I love, there has been some bumps along the road. But, I would by another first generation Titan again if it ever becomes necessary, hope not. Thanks to you all for the great info.
These became available in Australia last year, all imports have the Cummins diesel. Deep into the six figure dollar range to buy so very rare to see one in the wild. Bit odd that the Cummins is playing up, they have a reputation (in the trucking world) for being very reliable and long lasting.
I have a brother in Texas that bought his Titan XD Diesel new, and he's had a few issues during the first 9 months! He pushing about 75-80k miles. I guess I better suggest to him to get rid of it while its still running ok!
Hi guys, I have diesel engine cars for a long time and one thing that I use to do for a years is to cancel or block the EGR valve which is the cause of the dirt, the EGR valve opens the exaust into the intake so, cancelling it will improve the engine performance a bit and keeps it clean for much longer... once I have to go to the anual inspection I take the blockage away and than re-block it once the inspection is over... easy
Sorry this happened to you, there is a service bulletin that came out for this DTC back in October of 2020. Speaking as a Nissan diesel tech, they are not great. I was very excited when this was announced but once I went to training and drove one, I passed on this and got a 6.7 Cummins. Also they stopped Cummins XD production for the 2019 MY. If you need any help or other information, HMU.
@@goodone5590 unfortunately nobody imports hd trucks into the united states, so honestly you are stuck with the big three if you want a real truck here.I would love to see the epa roll back the emissions bullshit and see everyone producing super reliable diesels again but it won't ever happen. Gas engines will continue to be more reliable than modern diesels because they had a 40 year head start on ironing out emission control problems.
I might hit you up. For the price on Diesel trucks you can't find a better deal. I unknowingly bought "THIS" truck 2 days ago. But I'm going to stick with it for now.
I appreciate the upload , especially since Mr Jared himself replied to me ages ago, about how great the truck is and the myths of broken cranks, turbo problems, service and parts , that the internet has created. That's is exactly the reason I would rather get something more reputable with aftermarket parts available. Not saying others don't have issues because they do, but you can find parts cheaper and easier.
I’ve always found that filling the EGR cooler and intake with brake cleaner and lighting them on fire turns the black to loose soot... then a quick blow out and done. How many miles did this thing have on it?
Hope you trade it in for a new Ram 3500 with a aisin transmission and the Cummins 6.7. I just bought one and they are incredible! I haul 20k regularly it’s amazing how well they trucks handle it. The new Ford super duty is awesome too!
Glad to help you guys out! Great friends!
You are a merciful god among men!
i hope u made them clean up lol
These spontaneous collaborations are pioneering events. A small part of how we will expand the definition of community.
Hopefully, they cleaned up afterwards... watching them spray the black goo all over the top of the cart... 😕
You guys... nice to see the good vibes
I've been working as a diagnostic tech for 25+ years, and I'm so impressed with the width of knowledge that Jarod has. He knows his stuff about literally everything auto mechanical. Usually one has expertise in one or two areas, he knows it all. Hats off bud. 👍🏽
Not true, many people have the ability to know more than 2 fields.
Sounds to me like you boys can't stand a little bit of computition . look at who built the engine.
Anyone has the ability to know alot about alot or little bout nothing. All depends on how much time you want to spend working with the stuff, reading service information, absorbing it. The ability to decipher alot of the service information is there for the taking when if you work in a shop and every shop has service information available for makes, models across the markets.
People ask me at times how do you know so much about so many brands of vehicles.
I tell them all shops subscribe, pay, if dealer get it from mfr so we have to go look the proper information up.
Some people just think we're geniuses. OH wait we are as long as you know how to do what the hell ur doing..... Industry knowledge, years of being in the industry you see various stuff if you hit the Indy shops...
Excellent use of the underwater Bond Lotus.
Thought I was the only one that noticed it. Lol
17:05
Jared’s hood struts don’t work.....
he’s got a Wizard tool on the strut
(Vice grip pliers do the same thing)
Tips for modern diesels: ALWAYS DELETE, and if you don't plan on doing that or building the truck, then lease (or trade in before warranty is up). I'm sure this engine and the turbo assembly would last 3-4x as long as it did stock if it wasn't breathing in a bunch of debris its whole life. Also the Titan XD isnt a 3/4 ton truck, its more like a half ton (I've heard people call it a 5/8ths ton) but many people push the little titan too hard and blow it up
I agree except if they were hauling 1 car in a covered trailer it should not have been anywhere close to too much of a load. If I remember right it can tow 12k on the hitch and close to 19k on a 5th wheel.
@wadeslayback9338 ummm, not even close.
More like 10k hitch and 12 goose
I remember looking into these trucks, and size wise it's like a 1 ton, drivetrain is that of a 3/4 ton. But I seen the frame on it, and it's kind of pathetic. I've seen thicker frames on 1/2 tons. So yes 5/8 ton seems like the best classification.
Ok i think some follow up is due because the comments being made in this video is missing some key points here. All diesel trucks including fords, ram, and duramax will have turbos get plugged up with soot just like this when the dpf plugs. The dpf plugs because of regen issues or def fluid delivery that doesnt help burn the soot out of the dpf. To keep this from happening you do need to make trips at freeway speed for some distance and hope regen is happening properly. Additionally the 5.0l is very common in commercial applications so when looking for parts it is better to go direct to cummins dealer rather than nissan.
I love how Jared can deliver the Keeps script with a straight face.
The before and after picture was hilarious. I think they took them 1 minute apart and just turned the lights off. [click] "see, Tavarish's bald spots are gone!!"
finasteride and minoxidil actually works. but keeps is way too expensive.
@@aaronsanchez803 That made me laugh WAY too much. Thank you sir!
@@ssa0026
I'm sure that at least is somewhat cheaper than going to a doctor... Maybe?
@@r0b3rt_959 yeah but bro you can get kirkland's minoxidil for literally 1/4 of the price that keeps sells it for. I've been using kirklands and it 100% works. same with the finasteride.
Suddenly, It becomes clear why Freddie was working on his truck....hope it all sorts out in the end.
If you follow Jared over on Instagram you already know what happens
Yeah, and Freddie also did show that trailer in his 7.3 video.
ruclips.net/video/eq25-hsJtwIy/видео.htmltt
Parts guy: "How much brake cleen do you need?"
Jared: "Yes."
News guy: "Breaking news, severe shortage of brake cleen in Kansas, the governor has declared a state of emergency, several truckloads of Covid vaccine dumped on the side of the road in favor of bringing in the desperately needed parts cleaner..."
.... Carburetor Cleaner is Far Far more effective at cleaning the Carbon build up, it has stronger Chemicals in it... 🤔 Break Cleaner isn't as effective as Carb Cleane. You just have to let it soak overnight, to breakdown the carbon sludge that has built up. It worked on my EGR passageway.
I really wanted a Diesel Titan but now I'm glad I went with the gasser.
You saved yourself a lot of bs and money. I have the 1st gen titan. Best truck I've owned so far.
@A-a-ron probably for the best. If you want to go diesel it's either ford or dodge. I hear some good things about the duramax but for my money I'm taking dodge with the cummins or the power stroke especially the 7.2.
@@garrydhintz8017 Me too... i really wanted the ford with the 7.2 but i couldn't find any
@@truckguy6.7 7.2? What engine is that? Do you mean 7.3 gas engine? Or old 7.3 powerstroke diesel?
@@technicalitems731 It's the reason i couldn't find any
Jared’s knowledge about literally everything never ceases to amaze me. Hope to meet him at C&O one day and just talk. What doesn’t he know?!
Its not a Titan issue, it's a diesel emmisions issue. I have a Titan XD with the gas 5.6 and i love it. Go gas or get a 6.7L in a Ram if you want a diesel. There's a reason Nissan discontinued the Cummins engine option.
@Alpha Wërks automotive I never knew that.
Until cylinder number 7 excuses itself from that 5.6
@@Snoscoot Nissan is warrantying and replacing engines for 100k miles if it does do that. I actually hope mind does it before my warranty runs out. I get a new (and updated) engine in my truck. Then I should be able to get 350k miles out of it instead of 250k.
Yep. I seen the inline 6 3500 dually
@@Snoscoot yup ..... all 8 of mine excused themselves is been at Nissan for 2 weeks now.... cylinder 5 & 7 are the worst and it only has 43k oil changes on time
Waiting for a certain person's next video to drop with the title "I bought the CHEAPEST Nissan Titan in the USA"
Great video as always
Scotty?
Jared: Thanks for the help Wizard, how much do I owe for taking up shop space?
Wizard: Nothing
Jared: Thanks man!
Wizard: Here's your cleaning bill
>>Hoovie faints somewhere
They could just call BP to come recollect the crude Jared pulled out of the Titan. There's gotta be close to $20K in there alone :-P
Hell take the 20k BP pays him and get a better towing truck like any of the domestic threes 2500/250 diesel variant
That comment is very funny... wiz is not stupid... every time hoovie gets a estimation, how much his "cheapest of everything" cost... wiz always shows, what he will buy for the money... a yacht... house.. hoovie makes him rich 🤑
Tonight before I go to sleep I'm going to get on my knees and I am going to thank Jesus that I have a 1975 Dodge with a fresh engine Nirvana
As a former Nissan Diesel Technician/ Master, the Titan Diesel was bad since the beginning. Turbos goings out, EGR coolers cracking internally, oil leaks from the upper oil pan, DEF pump failures, and also the injectors going out
Was it Nissans fault or Cummins?
For the oil leak, from what I was told, it was a Cummins issue. There wasn't enough silicone applied at the factory.
Weird haven't had any issues on mine and I'm at 81,000
I give them mad props for even showing this. The Titan could have just ‘disappeared’ with the excuse of needing something more ‘wife friendly’ (or whatever). Good luck.
Renault group need to be called out on their bullshit parts distribution. They can't blame Covid, they have been like this for years, and now its spread to Nissan and Mitsubishi.
@@Beer_Dad1975 I`m sorry but to me it seems more like an issue with cummins making an engine exclusively for 1 vehicle that nobody bought, and than not providing the parts to keep them going when they give up on said engine after a rather short production run...
Hate Renault all you want, bit I do`t think this is their fault
@@andreanastacio9548 I'd rather blame Renault... My dad owns a Megane Scenic 1st gen with 1.6 16v. It's working good but intake pipe, first one, is rather impossible to get or with price so high, that You can buy 2nd engine for it. And funny part is, that it is so common for those engines, that You can't find one on scrapyard in one piece. At least it isn't necesary for engine to run. :D
@@andreanastacio9548 That makes no sense at all - Nissan sold the vehicle and therefore have the responsibility for supporting the customer - I'm not sure if Cummins supplied the turbo system or just the long block, but regardless, it's Nissan's fault if they didn't order enough parts from whoever the turbo manufacturer was to support a truck that's been out of production for less than 2 years.
By your logic since almost every car on the market has multiple parts supplied by 3rd party manufacturers, no car company can be held to blame if you can't get parts for their cars unless they make the part in house. That's just not how the customer relationship works.
Renault group have an appalling after market support reputation, and they are now ruining their child brands Nissan and Mitsubishi in the same way.
@@andreanastacio9548 Nah. This is partly due to Nissan Renault not buying parts to have on hand to sell to customers. plain and simple.
Like the most heartbreaking thing about this is that Freddy just paid off the loan on the Titan for Jared before Christmas.
Sounds like it's time to swap a 12V Cummins in it! Ditch that super complicated garbage Nissan turbo setup haha.
@@gingerd2098 it’s still a Cummins.
@@lawnmowerdude At least you could buy a gasket for it .
He traded the Nissan and already has a denali dualy by now..
Time to trade up to a Sierra Denali HD gasser. Boss and FIL both have the big gas Denalis and they love them.
Jared is so optimistic, this is the kind of guy who tells you with a smile you have to buy another engine
It means next week he will be able to make his boat payment.
"We're not in Kansas anymore!"
'Ha, but Freddy and Jared totally are!'
Thanks... Now I have something to look forward to during my 1,000 mile x 4 road trip with mine in a couple months... Chicago Illinois to Portsmouth Virginia moving a z31 and an e30 two separate trips.
Wait, so somewhere in Witchita there is a girl floating on a Titan door mumbling "I won't let go Jack, I won't let go" ?
Does she need the jack to change a tire?
Ya, but plot twist. It's actually a guy and his name is Westen.
Jared is just A Machine when it comes to working on those really hard jobs! Jared has raised the Titanic! Congrats! It promptly sunk slowly to the bottom. The budget does not include raising it again.
That truck was screwed the moment Freddie paid for it as a Christmas resent to Jared... it self-destructed. 🤣
It's called planned obolescence, worked perfectly fine. That's a car to lease 4 years or 100k miles, and then onto the scrapyard
@@Daemonarch2k6 You know that the intakes on diesel engines with EGR are supposed to be cleaned thoroughly every 150.000Km to avoid problems like this one right? It's basically considered maintenance. One that most people don't do until the car has problems.
It's because of the EGR and FAP and all that crap, but the EGRs have been around for more than 20 years now.
On gasoline engines is not as bad as with the diesel ones, but it still gets dirty and cause problems.
I wonder how that truck was driven, because normally it's because people drive like old grandmas all the time and causes that build up.
Nonetheless, since the FAP was introduced diesel engines have suffered a lot of problems.
The part about not getting able to find parts... where I live the makers must provide spare parts for 10 years after the model is no longer produced. I bet they could get parts, but not on time or too expensive. 🤷♂️
@@redfox435cat I skipped a little bit while watching the video... Kind of sad really that they have such a bad spare parts system.
reprogram the ECU so the EGR never opens and let the crankcase vent to atmosphere. No more engine shite. The DPF will still work fine too.
Hi Jarid and Tireach nice truck 🚚 🛻 and workmanship!!! Love the truck 🚚 🛻!! Maybe there was a clug still in there after start maybe that why it did not smoke or old gas from old shops !! If u still got it give it a fuel injector clean and what u still provided !!!
I remember when you got this truck, that there were so many comments about how bad this engine was in the Titan. Now your learning it first hand.
Yep, and they are damn lucky to have friends with lots of cars, connections, and a auto shop business willing to put up with them to bail them out.
didn't you just post a few months ago about how this was an awesome reliable modern diesel that nobody knows about lol
Exactly
And everyone commented it wasn’t
The "Titan"ic animations had me laughing way too hard. Don't change guys.
This is why Ram said "no thank you" to this engine. Hope you enjoyed Kansas!
possible, but I don't know.
I think if Ram had used this engine their would be a lot more parts on the market since Ram moves more trucks then Nissan (I think) so I feel repairs would be easier... however as far as the original issue that caused it.... well yea if you look at it like that, I could also see why Ram gave it a hard pass.
This engines still better than the pos Fiat they got in the current ram 1500s
@@brandonmick9191 Nah. The ecodiesel isn't very good but it's better than this. Not everything that cummins makes is good.
@@brandonmick9191 That's not saying much.
@@brandonmick9191 That’s a lie. The EcoDiesel, there’s nothing wrong with them
try using archoil from powerstroke specialty, it tends to help a lot with coking in diesels with dpf and scr systems. I use for all of my fleet and it has been great. Also, I would see if you can manually do a static regen, in order to burn some of soot and carbon out of the DPF to reduce the backpressure in the system.
This isn't just isolated to the Nissan, this is an issue with just about every diesel truck currently sold in America due to all this emissions crap that choke the hell out of these engines
As someone who lives next to an emission deleted diesel truck, I’m very thankful for emissions. My neighbors truck makes my whole house smell like diesel. And that’s one truck, imagine if every vehicle didn’t have the emission “crap”. We would never have clean air.
@@onelogue ill make sure to park my F350 2000 7.3 next to you then 😁😁😁. No mods no nothing.
@@onelogue sounds like you need to grow a pair and talk about the situation with your neighbor
@@erikkarlonas180 and that’s exactly why I’m thankful we have the EPA. Immaturity and pure disregard for other people’s well being. It’s always the immature people who make a bad name for diesel truck drivers.
@@Hempujonsito I have told the guy but he doesn’t have any options. There is no where else for him to park and he has to let it warm up to unthaw his windows. Only option is for him to spend thousands to put the emissions back in. Do I expect him to do that? No.
But I glad cars have emissions from factory.
I work at a nissan dealership in the UK, so I feel your pain ! We have a yard full of trucks waiting for parts on back order !!
Are those UK trucks also with cummins engine?
@@sinusgolf no they aren’t, they’re just a 2.3L 4 cylinder Renault engine
I have also a 1.5l Renault diesel engine in my nv200, changing oil every year and timing belt when needed it's okey
If your able to delete/ make a plate to cover EGR will stop it from getting gummed up as much.
As a shop owner and we specialize in diesel I’ve seen it all. The new lp5 Duramax trucks are trash, the 6.7 Powerstrokes are trash and the Cummins has it’s issues but is by far the best mechanically in the Ram platform. We don’t have any customers with the Nissan but 3 and all 3 have been flawless so far.
"We can call The Wizard over, but I am not putting that in my mouth."
Words to live by my friends!
its just bad engineering, from the crankcase vent that dumps oil into the intake when the engine is under load (its supposed to only take oil vapour but dirty oil foams up under load) to the EGR that fills the intake with carbon deposits, to the DPF/cat that gets dirty and over heats the oil in the turbo, the dirty intercooler can't keep up, intake temps go up, EGTs go up ... and its downhill from there
Holy shit... Dumping oil into the intake is an incredible fuck up. I'm surprised they weren't recalled to be honest, that's obviously going to destroy these things over time.
@@gingerd2098 its a common practice in turbo diesels, mine would suck up oil from the vent when the air filter gets dirty, the dealer said a gallon of oil in 2000 miles is within the acceptable oil consumption, they even showed me the service manuals (1 liter per 1000km)
@@gingerd2098 it's common in most forced induction engines. These can be helped with an oil catch can.
I know that most modern diesels gum up like this. I have read that it has something to do with the type of oil used with the DPF filters. The older oils weren’t as much of an issue with the engine but would plug up a DPF filter. The modern oils, even though they are synthetic really need to be changed at 3000K mile intervals because of the sludge they produce.
@@slowdaze more about the soot content in the diesel and how often and how hot you can get the CAT and DPF to clear them, its just the wrong solution for the problem, from EGR to DPF and CAT, you're trying to solve the emissions of incomplete combustion, lean produces NOx, rich produces fuel particulates, so its all about having the right tune and keeping EGTs in check, also they need to control the flow of air instead of react to it, its just bad engineering from the start
Talk about making Lemonade out of Lemons though - this disaster turned out to be a great video!
i agree! put a nail in nissan titan's coffin though. never buy one.
Well with the titan"ic" sinking he used it as an opportunity to make some youtube dollars off it
Wow, that one hurt Jared, his normal eye sparkle was so dimmed at the end
he spoke so highly of it
Agreed, right in the feels cause I bought one too. A sweet deal, 2018 with only 13K miles on it, just turned 22K. Now I know what I have to look forward to. I'll have to start planning on offloading it by the 80K mark, I guess....
@@shamanosarcasm9800 hopefully in the meantime Nissan/Cummins can figure out the issue and/or produce more spare parts so you won’t have to. I doubt Cummins wants the negative attention...
@@dcarts5616 cummins stopped producing the engine.
And this is one of the reasons diesel guys delete all of the emissions stuff. We need clean , reliable and not overcomplicated
When I read that Nissan had already canned the Cummins. I KNEW something was amiss. Wow what a pain. Also no parts available! Fantastic Peter
Loved the Bond Lotus swimming on background.
Can't wait how this turns up.
I have considered getting the Titan with the 5.0 diesel but this video confirms my fear. I just can't bring myself to getting one of these, just seems like a headache.
Just get it deleted. But at that point better for getting a ram with the 6.7. Much more reliable and more power. And be sure to delete that as well.
Ill stick with my old 5.9 common rail. No egr, no dpf, no def
My nephew bought one brand new. 100% nightmare. Almost sunk his business. Stay away.
Car and drivers Titan was the least reliable long term test vehicle they have ever had for a long term test. Coincidence?
@@rickcollins7172 thanks for the note. This is the type of info I've searched for.
It's so awesome having you both on the show. You guys rock. I never go on RUclips to learn something I always seem to learn something from Professor Jared.
Okay that lens blow fog clear up was weirdly impressive
I had the 2016 version of this truck, and had the linear actuator that operates the turbos fail as well. Went to my local dealership in Portsmouth VA, and there were none in stock. Called down in Florida and had one overnighted to me. Swapped it (took it to the dealership to program the limits) and it was good, for about 700 miles. Started hearing some weird noises from the turbos and didn't want to chance it. Found out back then (June or July of 2018) that they were on national backorder, and CFT hadn't released their single turbo setup at the time. Next day I traded it in on a Tundra. I miss the comfort of the truck, but glad I got rid of it.
Great group of guys, Jared, Tavaresh and the Car Wizard
Jared, you should seriously consider getting a tundra, Toyota is the way!
Toyota is always an answer.
Agreed, but he posted his new truck on Instagram and it's not a toyota :'(
I think he would need a diesel though, and the tundra is gas only.
@@sergep7770 that what he posted probably is cheaper in USA to maintain.
What did he get
EGR, DPF and crankcase vent deletes/reroutes are a must on diesels...
And doing that will get diesel's banned faster 🙂
@@sismofytter 🤷♂️ my truck is old and the EPA crap destroyed my engine once. Not going to pay for that a second time.
so instead of particles coming out of the tailpipe and ending up on the ground, they now build up in the engine, cause it to fail, and still end up on the ground.
Government Regulation at work.
And took a truck that should last 5-600,000 miles and makes it totaled at 100k
I use a plastic tote full of about two gallons of the harbor freight heavy duty degreaser and COLD water enough to cover the parts, and then let everything soak for a day or two, maybe three, then rinse. No scrubbing necessary, and doesn't quickly harm aluminum, as long as you don't use hot water.
The lighting difference on the keeps ad Picture is just gold 🤣😂
What i find funny is the Keeps ad in a video with a bald car wizard
@@thatonetacobellguy they even sponsor Emelia Hartford, its pretty funny.
To be fair I have noticed a very real difference in Tavarish's hair. Before I was like "Oof, dude just let it go," but now it looks fairly salvageable. Bald looks good on Car Wizard through makes him look wise and knowledgeable.
@@TheRealAlpha2
Yeah, I got used so much to watch the Car Wizard bald that when I look at him with hair on Tyler's old vids it kinda creeps me out lol
@@r0b3rt_959 That old show he made just got put on motor trend and it's pretty jarring to see the wizard back then
Is the Wizard calculating a supplies and shop rental bill at 11:45? It looked like it, but he wasn't rubbing his hands together like he does with Hoovie.
Hahaha his inner grabbler was coming out.
Hes just adding it to hoovie's diablo repair bill
Now I'm older I only buy mass produced vehicles with excellent parts availability and everyone knows how to work on them. Like my F150 and my Camry. This is exactly why, All the best to the both of you!
I do the same except with stick trans Accords and 1/2 and 1 ton Ford trucks.
That's why I love my 85 S10. It's so damn old, but parts are everywhere for it. Even GM still makes OEMs for it.
Thanks for the video, I plan on doing a good cleaning on mine before it goes down. Awesome video learned a lot from it.
Jared is the best part of this channel and Tavarish's channel... Such a genuinely nice guy and super entertaining.... Sorry Tavarish, but Jared is my favourite.
Owning a Nissan and having a channel called "wrench every day", a coincidence, I think not.
Been buying Nissan all my life and you apparently dont know what your talking about. This isnt a Nissan problem anyway, its Cummins.
@@jimbob4485 You must be fun at parties
@@jimbob4485 I know two people specifically who would disagree with you. One owned a rogue. 105k blew the transmission. The other one owns a Armada. Blew a little rubber line on the transmission cooler, drained all of his fluid and blew his transmission up. Nissan vehicles aren’t good vehicles.
@@FoolOfATuque so you knew two people that owned Nissan’s that have had problems. Drive by any Ford Chevy Toyota dealership right now, pretty sure there is one of their vehs on the rack with problems. I know a guy with f250 bought after my Titan that’s been in shop 4 times, my Titan has not. You think it’s only Nissan? Ok
@@jimbob4485 yeah? I also knew another guy who shredded his rear differential in his Titan, but you can believe what you want to believe. I won’t be buying a Nissan anytime soon. Will stick with companies that make good trucks.
This reminds me of the carbon cleaning that has to be done on BMW Intakes. This also explains why Tavarish is trying to fix his truck. Very glad I didn't buy a Nissan Titan. :D
nothing to do with nissan! ALL ENGINES HAVE THIS PROBLEM TODAY BCS OF EGR!! EGR DELETE AND UR ENGINE WILL LIVE FOR EVER!!!!!!
@ Last I checked, EGR deletes are illegal everywhere in the US.
@@roberthernandez7564 Dude, he must be right. He typed it in all caps.
@@roberthernandez7564 nope.. EGR delete that is perfectly legal in all states.... convert it to electric.
@@motome8 Hahahaha! Well played.
This has to be when Freddie popped up in the back of Hoovies Woody? Think it was last week?
Yeah, he had the exact sludge on his hands
On the VW TDI manifold when they get like that you soak the inside with some brake clean and light it on fire. Once they get burning, add a little bit of air from a blow gun and watch the flaming chunks come flying out. You'll have a spotless manifold quickly and easily.
I have used Lucas Diesel DEEP CLEAN additive in my fuel. I'm an owner/operator contractor with a Detroit Diesel DD16 600HP truck. I do a LOT of idle pto time while in service. This is detrimental with soot buildup as engine doesn't build up enough heat. So far I have 15,000 hours of operation and haven't had to do any maintenance on DEF systems other than changing DEF pump tank filter.
Lucas isn't cheap to be sure. But it's Hella lot cheaper than shop visits and downtime.
Just my 2 cents.
Well back order 200 plus sounds like that truck breaks all the time
I believe Scotty Kilmer said don't buy one for this very reason of what happened to the guys here.
That sucks that the Titan finally met its demise. Thankfully you were (hopefully) close enough to The Wizard to be able to use his shop to try to bring it back to life before it finally died due to lack of parts. Looking forward to the next video where we fully see the outcome of all of this (Spoiler: they reveal it on the Instagram account).
They build these trucks about 45 minutes from my house. I’ll go by and check the dumpsters to see if there are any parts y’all can use. Great vid! Crazy problems though...
Good scary modern light duty diesel video recording, thanks much for posting. I cannot imagine the labor charges at a dealer for this work, a few thousand to clean up that mess? Is that overheating of unburned fuel? I've never seen anything like that.
Don't forget clean it up the turbo intercooler, sure it's full of sludge also
I have a ‘18 titanic with a gas motor, lost the tranny at 38k miles and truck is currently at the dealership getting a new motor with 41k ... guy at the dealership said Nissan’s are not built like they used to be. My dad had 4 frontiers and never worked on any of them, It’s a dang shame
A few years ago nissan vehicles had the highest lemon law rate among all manufacturers, I don't know if they still hold that record. Nissan vehicles always have radiator failures which turns the transmission into strawberry milkshakes, I have rebuilt hundreds of nissan re5r05a transmissions due to coolant contamination and it almost always destroys the tcm in the process.
That's because ur titan is a lemon. This happens to all brands. Most titans last a very long time even newer ones.
if one non-emission diesel lasts the life of 2 emissioned motors, what the ecological impact of having to make two motors ?
all of my pre egr/dpf trucks lasted longer than the later models.
Great vid fellas,I have to side with Freddy on this one,don't buy a Titan
or any nissan with a 5.6L
@@Uniquestanced the 5.6 is a great motor. their titan is a cummins, not a vk56.
just get the petrol version
great trucks
Personally I'd go with a Gas Ford F-250, or a Toyota Tundra.
Ghosn-era Nissan at its most abysmal. Stay. Away.
Dpf, egr delete and a "tune" . Would highly recommend running a couple oil changes with engine flushes. That carbon shit can get to the oil pickup, at least it does on mazda cx5 have done a few recalls.
You should get a custom emblem made that says "Titanic" and swap out the "Titan" emblem with it. Film Jared when you unveil it to him. It would make my day.
*looks at Nissan “hamburger” logo*
“Hey look, they circled the problem for you!”
So buying parts for that is like Beetlejuice sitting in the waiting room at the end of the movie.
I actually have a 17 titan with the Cummins in it and I've made it to 80k miles and no.problems at all so far
I'd knock on the nearest piece of wood if I were you, lol.
This has 97k so wait for it
@@xwhels 2016 with 115, coolant tank sensor and lift pump but that's it.
I wouldn’t say don’t buy a Titan period, but avoid the diesel ones. I’ve heard nothing but bad things about them. Every other Titan I’ve done at work has been bulletproof, one even with Toyota level of high mileage.
In the end it really doesn't matter what engine is in it. They put a man on the moon, so it seems to me that Nissan or Cummins or whomever bears ultimate responsibility could have proven out the emission system before getting it in consumers hands. They are experts at leading men to shell out as much for one of these things as a decent house would cost, yet a slow, smoky old F250 with a non-turbo 7.3L would have already arrived home while that Nissan was still getting it's reach around. Then on top of that it broke down again! Just more of the modern campaign to convince people that things which are terrible are actually GOOD.
Redesign to future proof any diesel.
Block off the factory EGR port on the exhaust manifold and EGR water cooling if it has it then run a bit of exhaust pipe and tap into the exhaust behind the DPF But before the Cat / add blue thingy and connect the pipe into where the EGR valve is so that it now provides filtered air cooled exhaust gasses and not hot dirty gas. This system is used on some Caterpillar Diesel engines.
It works well providing the turbo doesn’t provide more boost pressure at the times the EGR is open than is present in the exhaust. The EGR should not be open at those times however.
Dude no, because of stuff like this the gov is trying to force through the Rpm Act. Just obey factory exhaust treatment and engineer around it. We've been running around with dpfs opfs and catalytic converts for ages in Germany, whilst in the states everbody whines about this. Engineering around is more than manageable and on a global climate scale relevant.
@@Joe-nc2ox Dude What I said is not a delete it's a fix for the crap house design that's already been proven
@@Joe-nc2ox are you really lecturing the US about exhaust treatment?? ever heard of Dieselgate?! lol you guys cheated the world already
I want to thank you guys for this video! It could not have come at a better time, as I was seriously looking at buying a Titan XD. I even thought that if I could find a late model, it would be getting one with the bugs worked out. Guess not. I was really hoping this would be a good truck too. And who knows, it might have been ... if not for EPA mandates. I think I'll keep driving my Tundra a little while longer, and start looking for a decent gaser.
Just avoid buying any newer truck if you plan on keeping it a while. Older GM trucks are solid and pretty much any Ford's with the 6.2 are a good example of a common and reliable truck. Avoid dodges and Nissan's. Toyota makes a great truck but leaves anyone who needs a 3/4 or 1 ton in the dirt unfortunately
5:27 Junior Mint photobomb.
Gotta love emissions green wash totaling out vehicles in no time at all.
I was afraid that the diesel would be a bad idea, I have an 06 that I love, there has been some bumps along the road. But, I would by another first generation Titan again if it ever becomes necessary, hope not. Thanks to you all for the great info.
Nissan suck. When they hit the 2000's they went down hill.
Yup. The 4th gen Sentra's were amazing cars. Minus the butterfly valve problem.
Yep I cant say it enough.
Exception being the Frontier, Titan (not diesel obviously) and the Armada.
My 1000hp track hawk gets about 5-8mpg and around 10 on highway when not doing hard pulls lmao!
Your Nissan made 100,000 miles? Amazing! Many Nissan owners wish they could be so lucky.
These became available in Australia last year, all imports have the Cummins diesel. Deep into the six figure dollar range to buy so very rare to see one in the wild. Bit odd that the Cummins is playing up, they have a reputation (in the trucking world) for being very reliable and long lasting.
The only ones to get those compounding turbos to work is the volvo heavy trucks segment cat, detroit,cummins all tried
Hope you cleaned the Wizards shop!!!
Dont worry flex tape will fix that
Lets see Titan repair delete videos...will be huge popular...solve the problem for the 200 people on the wait list.
I have a brother in Texas that bought his Titan XD Diesel new, and he's had a few issues during the first 9 months! He pushing about 75-80k miles. I guess I better suggest to him to get rid of it while its still running ok!
Hi guys, I have diesel engine cars for a long time and one thing that I use to do for a years is to cancel or block the EGR valve which is the cause of the dirt, the EGR valve opens the exaust into the intake so, cancelling it will improve the engine performance a bit and keeps it clean for much longer... once I have to go to the anual inspection I take the blockage away and than re-block it once the inspection is over... easy
Jared is a hefty boi and it kills me to watch him hang out of the engine bay with his feet up in the air 😂
Sorry this happened to you, there is a service bulletin that came out for this DTC back in October of 2020. Speaking as a Nissan diesel tech, they are not great. I was very excited when this was announced but once I went to training and drove one, I passed on this and got a 6.7 Cummins. Also they stopped Cummins XD production for the 2019 MY. If you need any help or other information, HMU.
He needs a toyota truck, not garbage like american trucks
@@goodone5590 unfortunately nobody imports hd trucks into the united states, so honestly you are stuck with the big three if you want a real truck here.I would love to see the epa roll back the emissions bullshit and see everyone producing super reliable diesels again but it won't ever happen. Gas engines will continue to be more reliable than modern diesels because they had a 40 year head start on ironing out emission control problems.
@@goodone5590 over priced tin cans ! And as a American we do build great trucks you don’t know what your talking about kid!
I might hit you up. For the price on Diesel trucks you can't find a better deal. I unknowingly bought "THIS" truck 2 days ago. But I'm going to stick with it for now.
aye guys diesel mechanic here, any diesel after 07,08 ish will have these sorts of issues. only way to fix em is to delete em
You obviously don't know what the f**k you're babbling about.
@@jadedjay7861 uhhhh how so boss?
One reason why I love my 2003 Cummins 3500. Yeah, the dash looks like a jumbled jig-saw puzzle but the engine pulls like a freight train.
I appreciate the upload , especially since Mr Jared himself replied to me ages ago, about how great the truck is and the myths of broken cranks, turbo problems, service and parts , that the internet has created. That's is exactly the reason I would rather get something more reputable with aftermarket parts available. Not saying others don't have issues because they do, but you can find parts cheaper and easier.
😂😂😂 I thought Jared said this truck was a good truck
😜
It was then, and if you could get parts it still would be.
We all knew better
@@TheQuestionableGarage give it up Jarred, it’s a POS Nissan
@@TheQuestionableGarage Sounds like Jared needs a 12 valve cummins swap :D
This is what i've been waiting for! Big F for the Titan! 😢
Not a Titan problem, it’s a Cummins problem. After 4 years’ Nissan dumped that engine.
@@ronaldpoley4357 hahaha.....they never sold. That's why. Buy a Ram if you want Cummins.
Nissan is lowest selling truck
Titan 5.6 has been reliable for me, never been sure about this cummins engine
Oven cleaner works wonders!
Lol even on graffiti
I’ve always found that filling the EGR cooler and intake with brake cleaner and lighting them on fire turns the black to loose soot... then a quick blow out and done.
How many miles did this thing have on it?
Hope you trade it in for a new Ram 3500 with a aisin transmission and the Cummins 6.7. I just bought one and they are incredible! I haul 20k regularly it’s amazing how well they trucks handle it. The new Ford super duty is awesome too!