I was running this saw for about 2 hours at about a 30-50% duty cycle ruclips.net/user/postUgkxfQm1wmg0ItKDLavxj1nXtQY9HP7EF504 and it did a great job. I used the lever for the built in sharpener to clear chip buildup out more than to actually sharpen the chain. It managed to cut some hardwood stumps much larger than it's size without bothering the neighbors with hours of 2 stroke noise.
This brings back memories of a embarrassing chain saw demonstration I did back in the day, assembled the new saw the night before started cutting nothing the chain was on the wrong way round just like this one.
Sad, I was so impressed until he did not clean the jets in the carb or change the rings. Bearings would have been nice too. THe chain on backwards was a dead give away
It wasn't as bad as many that are brought to me for repair. Half the time the cylinders are completely encrusted in filth and the recoil starter will barely move for the same reason.
I rebuilt a car once. I totally replaced the body. Then I replaced the chassis and suspension components. I replaced the engine and interior and all related parts. But I used the original gas. It never did start again. HA! Seriously; this was a terrific feat, a wonderful accomplishment and a terrific video! KUDOS!
я угораю,чудо мастер особенно когда поршень обтачивал и карбюратор без прокладочек собирал)))ни оценки состояния деталей что заменить взял почистил да помыл и опять всё в кучу))
Looks like a medium used chain saw that just needed cleaning. I have several chinese saws that look very similar. And he dipped the chain in some solution to make it look rusty. I appreciate the cleaning efforts
good thing you were filming when you happened to discover an abandoned chainsaw in the woods. what luck and it makes everything on the channel more trustworthy.
настоящий профессионал! по реставрации. А то на заводах инженера никчемные микроны какие то подгоняют, да нафиг надо, болгаркой уебал со щеткой, в старые подшипники смазки пожирнее намазал да старую тупую цепь другой стороной поставить. Для демонстрации наверняка недели 2 еще перебирал, настраивал. а может вообще на авито в рабочем состоянии потом купил)
I had no idea you could just soak a scortched piston and scored cylinder in gasoline then just use a tooth brush and wire wheel to bring them back to life. This pro tip will save me thousands of dollars. Thanks for sharing 🥸
I was really hoping that i wasnt the only one that noticed that he originally put it on backwards. Too bad he didn’t film himself putting it on the correct way
I can't believe all of the people on here telling the guy what he did wrong. If you don't want to watch the video for its pure entertainment value, then don't. This was obviously a lot of time-consuming work that the guy did on video for others to watch. It was pretty cool seeing an old rusted piece of equipment being brought back to life. Nice job buddy.
Looks almost like you through dirt on it and an oxidizer to make it look old and abandon because that clutch looked brand new if it was old in in the weather that would be completely rusted out
@@swimrski I agree with the thought of the saw being artificially aged. I repair old saws and one with a bar "rusted" that bad would have a forever hold on the chain. The drive teeth would have rusted solid inside the bar. I just don't see clutches that clean in old saws, with old being 30 years or more old.
yah, the rust was all way too superficial. Actual rusted bolts/fastners don't just come free with a squirt of WD40. The ones around the exhaust & under the saw, those rust the worst. Can take ages to nurse each one out without stripping the fastner heads or breaking them & having to re-tap & thread. Takes a few special tricks... but they all came out like butter for him? Nah.
Let me get this straight. You are complaining that ChainSaw is not "Dead Enough" Are you going to say, "I HAVE WORKED ON CHAINSAWS FOR YEARS AND YEARS". Really? Look at his "Likes and Dislikes".
Regardless of where this gentleman found this saw, he managed to disassemble it, clean off the mess and put it back together so it operates. That's the point and the only point. Outstanding job. Five Stars!!!!!!👍
Вот как только вижу дико ржавую вещь , типа мопеда 100 лет пролежавшего в море, так сразу и сомнения берут, а не наебывают ли меня. Все так прекрасно реставрируется. Прям сразу как новое.
Те кто шарят в реставрации, поймут, что он херово реставрировал карбюратор. Снаружи то фуфло, он должен был во внутрь заглянуть. По мимо этого он кучу других ошибок сделал
Cause he knows it ain't dirty. Like the half of the chainsaw blade protected by the cover and the gearing, it was all perfect. 😂 Who TF he thinks he fooling?
It would start easier with fresh rings and not filling the crank bearings full of grease lol Chain was backwards at first, and amazingly the clutch was mint. Also if that bar was actually that rusty you would never be able to use it again. That was flash rust and was intentional.
Когда ты гуляешь по лесу - за тобой всегда идёт кто-то следом и снимает?))))) When you walk in the forest - is someone always following you and filming?))))))
Это не реставрация а банальная чистка с полным разбором. Цепь установлена задом наперед. This is not a Restoration - just complete cleaning. The chain has a wrong install - it must work in other side of blades...
К доктору дью его надо! Но эта цепь в другую сторону😂😂и сколько надо было ей лежать, чтобы так херово выглядеть. А самый смак в том, что карбы такие не чинится, а просто меняются они одноразовые
@@ЕвгенийКомов-е2в Я думаю он ее просто рядом с водой и под пленку на недельку , предварительно заткнув где надо оставил и вуаля сверху слой "типо" злой ржавчины а на деле она и в таком бы состоянии завелась. Отмыл и пздц.
Its in Texas.....🧐 there are many chainsaws laying on the road.... I don't recall very well the movie.... Texas chainsaw...... something massage i think 😂
Мастер сделал все что бы бензопила не запустилась. Оставил заданную поршневую. Смазал густой смазкой подшипники, запихал старые сальники. И непонятно как состыковал поршневую с карбюратор ом. И каким то чудом она запустилась. Наверное если после такого реставратора отнести эту пилу мастеру, он бы охренел.
I sat here and watched the video, and I was thinking that too bad we can't fix people that have been discarded at one time or another and given a new life like you gave to the chainsaw,what a wonderful world this would be if we could !!!!😎
I have never seen a saw that looked that bad , come apart so easy. Does not seem to be any missing or broken screws, the the inside of the rope pull was bright white, I have broken and had to drill out many. Does not seem to be any damage to rubber parts, intake boot, fuel lines or motor mounts, Hmmm. Good looking finished product though.
Non credo che sei pratico di meccanica. Questo tizio. A massacrato ancor di piú questa motosega. In primis. Il gruppo termico va cambiato x che e tutto danneggiato, cuscinetti di banco para oli. Da schifo con il martello. Hahaha. Il grasso. Poi non ti dico. Sarebbe stato meglio buttare tutto che sprecare tempo li.
Chainsaws are mostly made of magnesium, aluminium, plastic and sometimes chinesium, none of which rust very much! Brown poster paint and puddle water are fairly easy to remove, the black stuff looks a bit more believable though! Piston is badly scored too, so I wouldn't expect a lot of compression. Interesting video though!
I don’t know about in this case but often it’s much more expensive to do a restoration than buy new. Even more so when you consider some of the tools some of the top guys have, like lathes and powder paint ovens. It’s about the challenge of getting things as close to perfect as you can and improving one's own skills. People like my mechanics don't sell what they’ve restored, they'll either use the restored tool or keep them on display. There again, if you make your living off RUclips it’s a totally different story. Then spending £100 on restoring a £3 oil can can become very profitable.
We all know it’s BS about finding it but let’s not forget he broke it down into a million pieces and put it back together, I always have at least two bolts or screws left, well done. 🏴🇬🇧
I have an Old McCulloch chainsaw my brother in law was throwing away. Not quite as nasty looking as your one. But you've inspired me to try and restore it. Great channel.
Все эти клипы начинаются одинаково. То игрушки находят в глухом лесу, то скутер на свалке, то бронзовый самовар прямо возле гаражей. Просто постановка, если не называть цирком.
I still can’t understand how all these restaurateurs from RUclips walk around their land and find chainsaws, scooters, motorcycles and cars in the bushes, no matter how much I searched in the bushes on my land, I didn’t find anything!
If it ran before it won't run long. The bearings are not to be greased. They are open to the inside with seals on the outside. Inside lubrication is provided by the 2 cycle oil that he didn't put in the gas. The run time on the video is all he had to provide before the cylinder walls and rings were shot.
I too keep stumbling over neglected old chainsaws on my forest walks. So I took to urban hikes. Where I kept slipping on neglected watches and tools. Its a curse I tell you.
Lol . It's amazing how many rusty items like hunting knives and bowies are piling up everywhere too. All these restorers seem to have piles of them lying around 😂
А ещё такая фишка. Поехал пацанчик на квадрике покататься. Отмахал км 15 по буеракам в самую что ни есть глухоманку. И тут ёёёбушки- воробушки, какая НЕОЖИДАННОСТЬ! Прямо в болотине электромотоцикл подростковый валяется. Ну ни дать, ни взять- леший на блятки у прошлым годе поехал, да по синьке его там и бросил. С этими находками уже так тему пообсосали, что клип смотреть в падлу.
What type of chainsaw runs on water? Figure that out and you have the answer. Portability gets to be an issue. A chainsaw needs to run upside down. BTW: a blown one.
De nuevo otra gran muestra de su habilidad para la restauracion esta ves con esta motosierra de gasolina oxidada y abandonada, resultado impecable mis respetos y saludos desde Venezuela.
I was running this saw for about 2 hours at about a 30-50% duty cycle ruclips.net/user/postUgkxfQm1wmg0ItKDLavxj1nXtQY9HP7EF504 and it did a great job. I used the lever for the built in sharpener to clear chip buildup out more than to actually sharpen the chain. It managed to cut some hardwood stumps much larger than it's size without bothering the neighbors with hours of 2 stroke noise.
Интересный ремонт и реставрация бензоинструмента ,водой помыл корщеткой почистил, хоп и все работает!
Super majstor
так и есть, в ихнем климате бросил на неделю без защиты от дождя и всё - реставрация. зачем только внутрянки пересматривать? они же в масле
RCTI
2015
MUGI RAHAYU
Great job restoring that chain saw to working order. Way to go.
Asmupo
AERTUIOPMLKQDFHLLMDBT? NuKasss 3:14
BISOUS BONJOUR DE LA FRANCE BIENVENUE JADORE CONTINUER MERCI
Seeing teardown stuff makes me appreciate the ingenuity of the person who designed it in the first place!
Cut to chase dont care about ur lil walk
Power tools dude
Kids are on
Agustus 2008
ANTV
Bruh it's fake did u notice the screws weren't rusty where the plastic was?
That spray! It's like Majik Eraser!
This brings back memories of a embarrassing chain saw demonstration I did back in the day, assembled the new saw the night before started cutting nothing the chain was on the wrong way round just like this one.
Done that too 😂
Yup. I was like "That isn't going to cut anything", but it was right-way-around in the end. I'm sure most of us have done it.
Sad, I was so impressed until he did not clean the jets in the carb or change the rings. Bearings would have been nice too. THe chain on backwards was a dead give away
TOTUL E SUPER PÎNĂ LA PISTON .PISTONU ĂLA E PREA UZAT.💯💯💯👍👍👍🤝🤝🤝
nice video. no talking. no music. good video
I’ve rebuilt chainsaws for years and I must say that’s the biggest load of crap I’ve seen in a long time
Because it's fake af
China's finest , probably spent more time " ageing " it then restoring it lol
I thought it was funny that since it was missing a nut holding the muffler on he didn't bother putting one on when he restored it. lol
It wasn't as bad as many that are brought to me for repair. Half the time the cylinders are completely encrusted in filth and the recoil starter will barely move for the same reason.
He put the chain on backwards that made me cringe
I rebuilt a car once. I totally replaced the body. Then I replaced the chassis and suspension components. I replaced the engine and interior and all related parts. But I used the original gas. It never did start again. HA! Seriously; this was a terrific feat, a wonderful accomplishment and a terrific video! KUDOS!
я угораю,чудо мастер особенно когда поршень обтачивал и карбюратор без прокладочек собирал)))ни оценки состояния деталей что заменить взял почистил да помыл и опять всё в кучу))
ещё и цепь задом наперёд одел, на 34:19 видно
Ha ha 😂😂
@@rafxrafixx4529❤
🙌🙌🙌🙌🙌🙌. From Brazil.
Looks like a medium used chain saw that just needed cleaning. I have several chinese saws that look very similar.
And he dipped the chain in some solution to make it look rusty.
I appreciate the cleaning efforts
Nearly all of the rusty restoration vids on RUclips have fake rust .
That definitely deserves a subscription
34:00 after all this work you put back in an old piston and put your chain backwards 😪
Yeah I was more intent watching him burn the end of the wood he was cutting.
Good eyes mate.
Right? Seized piston, original bearings, bar that was seized and a shot chain. I'm shocked it ran.
Weirdo here on this channel.
But he painted it!
Not only that but the risers look so tall I doubt the teeth would have any contact with the wood and it wouldn't cut haha
Awesome.
Excellent 👍
good thing you were filming when you happened to discover an abandoned chainsaw in the woods. what luck and it makes everything on the channel more trustworthy.
😂
He probably wasn’t, he just made it look like a coincidence.
@@samb4678 thanks for clearing that up. I am in your debt.
Yes people always leave $500 chainsaws in the woods that look like they were sprayed with gravel dust. I’ve found several
@@samb4678 thank you for clarifying things. That hadn't crossed my mind until you mentioned it.
Groovy....Restoration. Ash likes. Wish I had my Sthil 088. That thing was a beast.
Thanks for NOT putting annoying NCS music in the background! The mechanical sounds are WAYYYY better than music! Great restoration!👍👍👍
😅 3:24 fffxf😅😊😊😊😊😊😊😊😊😊😮😮😮😮😮😅😅😅deste de uma das principais características que não se deve fazer um curso superior e a www10w 88888
AweSome video !!! 😜 I loved watching 😁
настоящий профессионал! по реставрации. А то на заводах инженера никчемные микроны какие то подгоняют, да нафиг надо, болгаркой уебал со щеткой, в старые подшипники смазки пожирнее намазал да старую тупую цепь другой стороной поставить. Для демонстрации наверняка недели 2 еще перебирал, настраивал. а может вообще на авито в рабочем состоянии потом купил)
Имено, халтура. 👍👍👍
Good 👍👍
I had no idea you could just soak a scortched piston and scored cylinder in gasoline then just use a tooth brush and wire wheel to bring them back to life. This pro tip will save me thousands of dollars. Thanks for sharing 🥸
He didn’t even rebuild the carburetor. 😬
@@timmyjohnson2285 he must have!?
tell me how all the screws bolts ect came straight out when i work on a saw that was working the day before and they are all solid and break
Very good👍
you did a fine job of cleaning and restoring it i give you an a+-----take a good look at the chain
I was really hoping that i wasnt the only one that noticed that he originally put it on backwards. Too bad he didn’t film himself putting it on the correct way
I can't believe all of the people on here telling the guy what he did wrong. If you don't want to watch the video for its pure entertainment value, then don't. This was obviously a lot of time-consuming work that the guy did on video for others to watch. It was pretty cool seeing an old rusted piece of equipment being brought back to life. Nice job buddy.
Well it is all fake buts its entertaining
Looks almost like you through dirt on it and an oxidizer to make it look old and abandon because that clutch looked brand new if it was old in in the weather that would be completely rusted out
It was manufactured with a "Stay Shiny" clutch
@@swimrski I agree with the thought of the saw being artificially aged. I repair old saws and one with a bar "rusted" that bad would have a forever hold on the chain. The drive teeth would have rusted solid inside the bar. I just don't see clutches that clean in old saws, with old being 30 years or more old.
yah, the rust was all way too superficial. Actual rusted bolts/fastners don't just come free with a squirt of WD40. The ones around the exhaust & under the saw, those rust the worst. Can take ages to nurse each one out without stripping the fastner heads or breaking them & having to re-tap & thread. Takes a few special tricks... but they all came out like butter for him? Nah.
I have been working on small engines all my life especially lots of chainsaws and I had to laugh a little at the video.
Let me get this straight. You are complaining that ChainSaw is not "Dead Enough" Are you going to say, "I HAVE WORKED ON CHAINSAWS FOR YEARS AND YEARS". Really? Look at his "Likes and Dislikes".
Great movie thanks you have given me inspiration to get some of my own projects underway.
NICE DESIGN
Regardless of where this gentleman found this saw, he managed to disassemble it, clean off the mess and put it back together so it operates. That's the point and the only point. Outstanding job. Five Stars!!!!!!👍
Well done 👍🏻👍🏻 🇮🇳 || Kuki 22|02|2022
Вот как только вижу дико ржавую вещь , типа мопеда 100 лет пролежавшего в море, так сразу и сомнения берут, а не наебывают ли меня. Все так прекрасно реставрируется. Прям сразу как новое.
Те кто шарят в реставрации, поймут, что он херово реставрировал карбюратор. Снаружи то фуфло, он должен был во внутрь заглянуть. По мимо этого он кучу других ошибок сделал
Не, не наёбывают🤣🤣🤣
Great job, fun watching.
I'm pretty confident I could dismantle and deep clean a chainsaw like that.....but reassembly - that's a whole other skill!
Facts
not really
Just video it, then you'll know how to put it back together
Very. Very. Cool 😎. Nice 👍. Work. Love. It. Do. Not. Stop. Lee
I guess the carb doesn't get a look inside for dirt or debris, just clean the outside, it'll be fine.
thats what you get when it was likely a running saw that was planted by him ..lol he does good work but why the deception
@@lancemorgan7422 I didn't see him hone the cylinder or replace the piston rings or use a ring install tool.
Cause he knows it ain't dirty. Like the half of the chainsaw blade protected by the cover and the gearing, it was all perfect. 😂
Who TF he thinks he fooling?
the motor was stuck lock at the scratches on the piston and cylinderwall😩
Very skilled person goodjob,, greetings from philippines
It would start easier with fresh rings and not filling the crank bearings full of grease lol
Chain was backwards at first, and amazingly the clutch was mint.
Also if that bar was actually that rusty you would never be able to use it again. That was flash rust and was intentional.
Good👍👍👍❤️
Rusty Gasoline Chain Saw, very accurate restoration 👍
Chainsaw. My Favorite Power Tool!
The fact that they got it to working order and all it needed was a clean up is awesome
Когда ты гуляешь по лесу - за тобой всегда идёт кто-то следом и снимает?)))))
When you walk in the forest - is someone always following you and filming?))))))
What impresses me the most is that they don't randomly find these equipment, they simply put them there to produce images and then go get them
the magic off the fake
Stihl... Husqvarna...???🤔O.K. !!!👍🛠️💥
China pure chain saw
Это не реставрация а банальная чистка с полным разбором. Цепь установлена задом наперед. This is not a Restoration - just complete cleaning. The chain has a wrong install - it must work in other side of blades...
cada trabajo tuyo me sorprende mas... te felisito
Каким нужно быть ослом чтобы цепь поставить неправильно
Ещё и не заточенную после (типо долгого) хранения на улице
Надо быть им
Может это просто пиар, ты же комент написал)
I love you and these videos I hope you post more videos every day ]or week if so.
К доктору дью его надо! Но эта цепь в другую сторону😂😂и сколько надо было ей лежать, чтобы так херово выглядеть. А самый смак в том, что карбы такие не чинится, а просто меняются они одноразовые
Что он сделал, разобрал, помыл и собрал (заранее грязью облили, типо долго валялась, а опилки внутри новенькие )
@@ЕвгенийКомов-е2в даже подшипники не поменял, а поршень так и помыл так себе)))
Главное побрызгать на болт или гайку 🤣🤣🤣
@@ЕвгенийКомов-е2в Я думаю он ее просто рядом с водой и под пленку на недельку , предварительно заткнув где надо оставил и вуаля сверху слой "типо" злой ржавчины а на деле она и в таком бы состоянии завелась. Отмыл и пздц.
@@dimasina7837 Ага, в такой подшипник если вода попадает его сразу можно выбрасывать, хоть феном суши хоть в спирту купай, ему кранты
So satisfying to watch! No wonder they are so expensive. So much going on inside. Well done!
Yea never knew there was so much to a chainsaw
I would have positively changed the piston, rings, main bearings, bar, and chain.... otherwise... strong work!
Good work
I like the fact that you just happen to stumble upon a really old rusted chainsaw in the just infront of the bushes on the other side of the river
Its in Texas.....🧐 there are many chainsaws laying on the road....
I don't recall very well the movie....
Texas chainsaw...... something
massage i think 😂
@@panosvrionis8548 chainsaw massacre
@@allenwilson9656 😜
No no i think the hero of that movie was a heropract a little bit misunderstood
He wanted to make massage with chainsaw 😂
The funniest part is, is that the chainsaw isn’t even that old😂
@@panosvrionis8548 I live in texas and there aint chainsaws just laying around on the side of the road. LOLOLOL
Мастер сделал все что бы бензопила не запустилась. Оставил заданную поршневую. Смазал густой смазкой подшипники, запихал старые сальники. И непонятно как состыковал поршневую с карбюратор ом. И каким то чудом она запустилась. Наверное если после такого реставратора отнести эту пилу мастеру, он бы охренел.
I sat here and watched the video, and I was thinking that too bad we can't fix people that have been discarded at one time or another and given a new life like you gave to the chainsaw,what a wonderful world this would be if we could !!!!😎
Great Work!!
I have never seen a saw that looked that bad , come apart so easy. Does not seem to be any missing or broken screws, the the inside of the rope pull was bright white, I have broken and had to drill out many. Does not seem to be any damage to rubber parts, intake boot, fuel lines or motor mounts, Hmmm. Good looking finished product though.
Non credo che sei pratico di meccanica. Questo tizio. A massacrato ancor di piú questa motosega. In primis. Il gruppo termico va cambiato x che e tutto danneggiato, cuscinetti di banco para oli. Da schifo con il martello. Hahaha. Il grasso. Poi non ti dico. Sarebbe stato meglio buttare tutto che sprecare tempo li.
@@aygo73 Penso che la Sega sia stata preparata per il video.
The main thing is that you did a great job!
Good job making it rusty in the first place. NICE FAKE RESTORE JOB.
Wow! Glad you found my chainsaw!
what brand of chainsaw do you suppose that would be ?
Good Restoration
well done , man ! Brilliant work ... :) But chain is fitted in the wrong direction ... !
Definitely worth the time
Amazing job!! Loved the intro as well
Nice job
just out 4 a daily stroll happened to remember where you hid your chainsaw decided to make a youtube video on it how nice
Fine job young man 👨
шину специально краской желтой намазал типо ржавчина! пила новая! замарал обляпал краской!потом отмыл типо починил !видно что ты людей дуришь!!!
а мысли не возникло что полотно новое поставил он и цепь тоже
@@Santa-Ivanto 2:50 цепь внутри как новая даже в масле
И цепь наоборот поставил🙂🙂🙂
Chainsaws are mostly made of magnesium, aluminium, plastic and sometimes chinesium, none of which rust very much!
Brown poster paint and puddle water are fairly easy to remove, the black stuff looks a bit more believable though!
Piston is badly scored too, so I wouldn't expect a lot of compression.
Interesting video though!
Well done. Great restoration
Nice and FAKE.
I liked this restoration
Is this types of restoration is profitable than buying new one
I don’t know about in this case but often it’s much more expensive to do a restoration than buy new. Even more so when you consider some of the tools some of the top guys have, like lathes and powder paint ovens. It’s about the challenge of getting things as close to perfect as you can and improving one's own skills.
People like my mechanics don't sell what they’ve restored, they'll either use the restored tool or keep them on display.
There again, if you make your living off RUclips it’s a totally different story. Then spending £100 on restoring a £3 oil can can become very profitable.
Dude, spectacular video. It was excellent my friend. I'm already your subscriber. Like for everything.
Природа прекрасна! Только посмотрите что выросло на бензопильной плантации
Omg this video is like watching paint dry 🙋🏾♂️
No new bearings were harmed in the making of this video.
Grade work ❤️🤟
We all know it’s BS about finding it but let’s not forget he broke it down into a million pieces and put it back together, I always have at least two bolts or screws left, well done. 🏴🇬🇧
Mate if you think that was put together well...
@@NationalBoners where does it say it was put together well?
I have an Old McCulloch chainsaw my brother in law was throwing away. Not quite as nasty looking as your one. But you've inspired me to try and restore it.
Great channel.
Most of old saws just need carburator replacement to function again
Might cut a little better if the chain wasn't on backwards lol
P😊😊😊😊😊
Lucky find?
Wire Brushes do Amazing things..🧐
Искал закладку, случайно нашёл пилу, фантастика.
Все эти клипы начинаются одинаково. То игрушки находят в глухом лесу, то скутер на свалке, то бронзовый самовар прямо возле гаражей. Просто постановка, если не называть цирком.
Fantastic chainsaw now
Real rust on a steel bar wouldn't go away by just one pass with the wire wheel.
Looks like it was sprayed down with a corrosive solution
Most of these restorations where the item is covered in rust are fake anyway.
I still can’t understand how all these restaurateurs from RUclips walk around their land and find chainsaws, scooters, motorcycles and cars in the bushes, no matter how much I searched in the bushes on my land, I didn’t find anything!
Q555
Q
You have to go on the neighbors property lol
You installed that same cracked piston. Didn't even clean the carburetor. Lack of experience is clearly visible.
I agree, they even used the old bearings... Man that hurts so much😢
Probably because for a new piston it's s lot of fucking money for a fake restoration
He just wanted to make it look pretty. Junk saw even when new. Not worth the time to restore it. He's just doing this for RUclips clicks.
Just Me yeah he needs to get chainsaws abandoned in a scrap yard or some shit you know not destroy a piece of shit and restore it for views
If it ran before it won't run long. The bearings are not to be greased. They are open to the inside with seals on the outside. Inside lubrication is provided by the 2 cycle oil that he didn't put in the gas. The run time on the video is all he had to provide before the cylinder walls and rings were shot.
นายเก่งจริงวะสุดยอดเลย
Ох уж эти сказочники!
Нуу ..да еще и корбюратор не почистил
Доктора дью в студию
@@dmxumrrk332 Lo
@@ЕрмекСатов-м7з l
Very nice
I too keep stumbling over neglected old chainsaws on my forest walks. So I took to urban hikes. Where I kept slipping on neglected watches and tools. Its a curse I tell you.
Lol . It's amazing how many rusty items like hunting knives and bowies are piling up everywhere too. All these restorers seem to have piles of them lying around 😂
@@enochpowellslibrarian5595 bbbhibhhbbh BB bbbhibhhbbh BB bhbbhbhibbb BB b jj h in hhihhhh HH hhihhhh jjj HH j hhihhhh it ojjjj
Good result! Greetings from Germany!
Так непринуждённо в лесу пила валяется)
Мне токо интересно где Ана была
А ещё такая фишка. Поехал пацанчик на квадрике покататься. Отмахал км 15 по буеракам в самую что ни есть глухоманку. И тут ёёёбушки- воробушки, какая НЕОЖИДАННОСТЬ! Прямо в болотине электромотоцикл подростковый валяется. Ну ни дать, ни взять- леший на блятки у прошлым годе поехал, да по синьке его там и бросил. С этими находками уже так тему пообсосали, что клип смотреть в падлу.
Chúc mừng bạn thành công nhé ❤💗❤
What kind of chainsaw runs on straight gasoline?
What type of chainsaw runs on water? Figure that out and you have the answer. Portability gets to be an issue. A chainsaw needs to run upside down. BTW: a blown one.
none
Шикарно,браво золотым рукам
Nice restoration.....but I would have sharpened the chain, capiche?
capo lo felicito , la dejo impecable
Интересно сколько людей поверили что этот театр правда?
Ну инострацы почти все. Наши поржали.
WOW that turned out really good well worth it well done
RCTI DESEMBER 2009
GLEDEK
ROYAL CS5200 CHAINSAW
Sepatu Baru
De nuevo otra gran muestra de su habilidad para la restauracion esta ves con esta motosierra de gasolina oxidada y abandonada, resultado impecable mis respetos y saludos desde Venezuela.
Нет в лесу брошенных бензопил.