@@ironcladranchandforge7292 half a grand at least for the front seat, at least that much for the front clip.....dont worry, dan will come down from frostbackistan and scoop it up
The other day my wife said I can't believe you're still watching this guy I said this is several episodes later.... she's like why? I said it's kind of like hanging out in the shop with a buddy of yours and not feeling bad about not lending a hand to do anything lol and the barley pops are close by! Been home for a few weeks going through surgery recovery.thanks for helping me kill time keep them coming 😉👍
Mortske, you and DD speed shop should do a collaboration on a tri 5 project some time, since he is the expert. You could probably learn a lot from him. That wagon could be a two door in twelve minutes. LOL! Love your videos.
I owned one, same color, but BelAir. By the time I got it in the mid-90s, it had been through several owners and drivetrains. Everybody in town either knew of the car, or partied in it at one time or another. I knew it had a 327/4spd in it before I bought it because I knew the previous owner, he was my best friend. He passed of cancer at 25. His wife sold the car and I found it for sale with no engine/trans. I put a 283/Powerglide in it. My best bud and I were cruising in it one day, and the brake pedal went all the way to floor, heard a snap on the RF wheel. The pin that holds the top two brake shoe springs snapped off, this pin also holds the wheel cylinder, so in conjunction with the single reservoir master cylinder, we wound up running a stop sign at 40mph, and literally put her on two wheels making the hardest right turn I've ever ridden in. I replaced the MS with a dual from a 70s Camaro, along with its proportioning valve and new brake lines for the fronts. Highly recommend this mod if you plan on keeping her.
You could put a windshield and some patina oil on it. To bad you don't have an old small block to put in it with that 3 speed people like when they run. I almost dropped my beer when I saw the inside of that motor and the look on your face was priceless. Another fun video keep them coming.
I know right, man when Mortske lifted the intake off that thing I thought holy crap that things dirtier than Duff after finding a virgin mud pit to roll around in.
I can never get over how long the nose is on those, and how much room they have in front of the engine, and yet the back of the engine is still jammed into the firewall.
What a shame !! However , You did bring it around and make it into a very pretty piece of classic 1957 Chevrolet . You have a way with words as well as the tools to make this station wagon look like a diamond in a coal mine . Some times you have to go round the Sun to meet the Moon but its the outcome that's important , and you were very successful . Thank you for the work you do to bring these videos to us . Mortske , you are the man !! and I love your honest , and humorous approach to every situation , Stuart in Canada ..
Even in the late 60s and the 70s, 57 Chevys were popular. They still are. But for me, I love a 40s coupe. Still.. station wagons have always had a special place in my heart
I opened up a sbc oh a couple of years ago now. And when I popped the intake off the lifter valley was full of dog food!! Talk about a surprised guy when I seen that.
Morkske Repair Friend Always good watching your videos and Duff the dog !! And even though the 57 Chevrolet Station Wagon sbc 283 ci V8 engine was to for gone ,great job on you putting your work into the rest of the car too clean it up 🇺🇸🇺🇸🇺🇸😃😃💪💪👍👍👍👍
Your making it affordable for someone to start a project and just put money in it weekly as you get paid. That's how we all built our rods when I was young. Sides jobs are awesome for making extra project cars.
Just ordered my Duff bobble head and the orange squarebody decal that matches my squarebody !! Duff will go on the dash and the decal will proudly be displayed on the rear window. Thanks for the entertainment!!!
I've been eyeing this in the background as I have a hankering for a tri-five wagon, as soon as I saw it was $3000 I knew it wouldn't run! It's a good price, i've seen a ton of total junk for waay more and this one's now been on tv!! Thanks Mortske!
woohoo!! Another amazing Mortske Monday video! Thanks again for all your hard work to produce these sir. So many of us seriously enjoy your vast knowledge and amazing work ethic!
That engine is well done. The mouses made the best home of the engine. I have never seen anything like that. Great video learn something new every day. 😊
Hi Mortski and Duff and his Pop nice video 📹 and workmanship I love that car inside and out paint job from Earl Shibe Have a full size Duff Bobble in the back or around the vehicle Or Pudding 🍮 full also say do Duff do You want a Bisket or Pudding For looks for yard art 🎨 🤔
Totally agree with washing the crud off before working on a new project, especially the engine/bay, knock all the webs off and run off the critters and their stinky nests. But these guys who completely detail a car that's been in a barn 30+ years and they haven't even checked to see if it turns over, that's just bad luck.
ive been in the trade since 84. We had a car come with a seized motor no oil. We replaced the motor and got it running and found the gearbox was seized too. No you are not a hack mechanic Dr Mortske. You are an automotive surgeon of the first order. Do what most of us mechanics do . Have a sandwich or 3. The shakes stop after the first 6 sandwiches. You're giving up! Its only a couple of rusty pushrods LOL I knew it was going to be bad when you had to cut the distributor off. Love your channel.
The bigger disappointment in my younger life was buying 3 sets of factory Corvette valve covers and realizing they wouldnt work on later sbc , I had them for 20 yrs and a Corvette guy found out I had them and offered big money , I finally found justice after 20yrs
I spotted that in the back of your other vid & I'm not a big tri five guy either but something about that wagon just does it for me! Love that blue 2 tone, Bro! This made me happy when I woke up this morning! ✌️from Ohio
You are doing the Lord's work by instructing the youths on how to add value to the junk rusting away at pap-pap's farm. It takes skill to polish turds into project car gold.
Mortske i enjoy watching your videos i loke the one you did for your dad on the buick ls swap i thought you did a great job i have watched you before you got bigger i enjoy you videos more than vice grip i lost my dad 7 weeks ago and it has been rough i miss him alot i was also a mechanic welder and electrian 3 back surgerys ended that but i love your vidoes and that video was not to long i wished that you would do some more ls swaps detail for detail i could watch it even if it was 4 hours in segments to see what all needs done like in a sqaure body chevy pick up ill allways be partial to the 350 chevy or 454 but those are getting harder to find they have either been scrapped or used in drag cars everyone wants a ls engine now plus there are s bunch of them anyway i appreciate what all you do and i sure enjoy watching your videos thank you very much from Alabama
Those 57s are very simple cars to work on unless you are a whiner. I had 3 different ones back in the mid 60s when I was in high school. Had to put an engine in one of them. You might fall in love with it. It was easy to find parts for them back then. The 57s were the first year of the 283 so unless it was built in late 56 yours should be a 283.
Wesley’s is now Black Magic and I use it on my whitewalls and raised white letters with no issue. I’ll have to try the Magic Eraser trick. Massive improvement on the old 57. Looks like a different car now.
When I was growing up in Boulder Co. there was a Ledgen of hubcap Anny. She would go around picking up hubcaps off the side of roads and turn around and sell them.
Love the videos, and am glad you are not doing the 50 and 60 thousand dollar stuff that most of us cannot afford. Back in 1965 I think it was, my grandfather traded his 54 Chevy BelAir 2door and a shotgun and 25 bucks for a 1957 Chevy wagon with only 29 thousand miles on it. Six cylinder and standard trans and it had a radio and two rear view mirrors, and several options. He kept that car until he passed away in 1982 at the age of 92 years old. The wagon was still going strong when I sold it to an old codger that I knew would take care of it. Thanks again for the videos. They are entertaining while we can learn some things. Thank you.
as one of the fans who suggested the Ridgid shop vac I’m glad it’s living up to your expectations. Not that anyone in the comments wouldn’t be an expert of course.
51:19 I am pretty amazed at the Comet wash efforts, they turned the green fenders blue again. Definitely worth doing the whole car for wow factor in photos!
Sir Thomas demonstrates in almost every video the practically subliminal demonstration of hard work ethic and how it translates to goal achievement. It’s the example of the experienced engineer who does not suffer fools gladly; yet, even with a growl or cheese and rice - perseveres and gets up the next day knowing the rock is in front of his door, then proceeds to push it up the hill - again. Inherently, he’s setting an example for the next generation. You can tell he’s doing the right thing - because God gave him Duff!
Yeah 80s. Swap meets you could pick your parts and for couple hundred bucks you. Could assemble generic. SBC for projects..less if you waited til closing and scoured the. Piles of Chevy stuff left behind😅😅
that a pretty nice wagon, i bought my 57 210 wagon about a year ago with no engine or trans. on 57 the center bumper bar is wagon only. you can use a car bumper it will fit it just don't have the flat spot where the tags go at . i put a regular car bumper on mine that i had in stock. my wagon was sitting since 1972. it is running and driving now. i put a 350 & th350 in it and i got the brakes working.
Minute 37 - oh no, don't think this engine is ever going to run. Minute 43 - worst fears confirmed and then some. It has to be disheartening at times as you rip into these engines and discover how bad things really are. Props for hanging in there with them and doing your best to add some value for the next owner/s. I always enjoy your content, it's clear you enjoy what you're doing and you're educating/entertaining a large audience!
Really enjoyed this video! If you liked the way it looked when it was wet & shiney, you could get some of the VGG Shine Juice from Derek. It can be wiped on or sprayed on & it would make it look amazing with that paint!! Thanks for the video!!
If this RUclips thing doesn’t pan out, you could always do ‘Mortske’s Detail Shop’ with the Comet bucket? 😂😂 But seriously, that color is amazing. Just the right amount of semi flat, and patina. Also, I finally got the support to your channel fixed, so that’ll help too. Be blessed brother.
Good evening from Cape Cod ⛵ Wow! Surprise surprise when you lifted that intake, I've never seen anything quite that screwed up 😂 I wasn't sure where you were going to go with this car, man I'm quite surprised you dial that up to get rid of it. I agree with you, the more presentable you make a vehicle the more appealing it is. She looks pretty damn good sitting out there in front of the shop. Somebody will definitely buy it. Thanks for an enjoyable and different video ✌️🇺🇲
Looks "really nice"! I appreciate all the project flipping tips! I was excited when we found the engine was trash, first thing I thought of was that blower motor sitting around somewhere! I love a wagon with a blower! A blown Faux-mad! Let's do it! (and let's, I mean you... I'll watch from home!)
That's a great base to work off of for someone. There's so many long roof clubs forming out there they've become more desirable. Someone will snatch that up and go with it.
Mortske Monday with another piece of hot garbage....YEA!!!! And yes, those "Magic Erasers" are really pretty awesome and good for oh so many cleaning tasks!
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
$3000!!?, "I know what I got",
does that include the Meth Dakota crack yer smokin', too?,
Looks like we got ourselves this weeks winner! Come on down Shane!
@@shanefsr6609 -- There's easily 3k worth of parts on that car.
@@ironcladranchandforge7292 half a grand at least for the front seat, at least that much for the front clip.....dont worry, dan will come down from frostbackistan and scoop it up
I was just thinking he must not have gotten it running because he ONLY wants $3000 for it. haha
@@shanefsr6609 Obviously you're not a car guy, or a guy!
The other day my wife said I can't believe you're still watching this guy I said this is several episodes later.... she's like why? I said it's kind of like hanging out in the shop with a buddy of yours and not feeling bad about not lending a hand to do anything lol and the barley pops are close by! Been home for a few weeks going through surgery recovery.thanks for helping me kill time keep them coming 😉👍
Get well soon sir.
Speedy recovery fellow viewer
Get well soon!
Speedy recovery bud.
Get well soon I pray your life will be back to normal soon and you and your family can have hope and peace again. 🙏🇺🇸
Who doesn’t enjoy Mr. Mortske and his crew? Just the very greatest channel! 🙂♥️
57 same year as me. Always look forward to Mortske in the morning and Pudden in the afternoon for a good Monday.
PUDDDIN, PLEASE CHANGE YOUR NAME DEAL....
I'm sitting at work, in the middle of a hurricane, but now I have something good to watch. I appreciate you sir!
Pressure washing taken to another level!
@Archersgarageandwhatnot me in the hurricane too. Makes it hard to get much done in a day !
Hunker down brother stay safe.
I was watching this during the hurricane too lol.
Mortske, you and DD speed shop should do a collaboration on a tri 5 project some time, since he is the expert. You could probably learn a lot from him. That wagon could be a two door in twelve minutes. LOL! Love your videos.
Mortske can't finishing anything
With a grain of salt is a translation of Latin, cum grano salis, which pliny the elder used in describing an antidote for poison
@@stever983Neither can Dan, unless you consider his super low bar for ‘good enough’ to mean finished 😂
He’s gonna lose the shop!
Dear Mr. Mortske: You find the most amazing things to work on. Much appreciate your endeavours.
Glad to hear it
Always making Mondays better, thanks Mortske and Duff
I owned one, same color, but BelAir. By the time I got it in the mid-90s, it had been through several owners and drivetrains. Everybody in town either knew of the car, or partied in it at one time or another. I knew it had a 327/4spd in it before I bought it because I knew the previous owner, he was my best friend. He passed of cancer at 25. His wife sold the car and I found it for sale with no engine/trans. I put a 283/Powerglide in it.
My best bud and I were cruising in it one day, and the brake pedal went all the way to floor, heard a snap on the RF wheel. The pin that holds the top two brake shoe springs snapped off, this pin also holds the wheel cylinder, so in conjunction with the single reservoir master cylinder, we wound up running a stop sign at 40mph, and literally put her on two wheels making the hardest right turn I've ever ridden in. I replaced the MS with a dual from a 70s Camaro, along with its proportioning valve and new brake lines for the fronts. Highly recommend this mod if you plan on keeping her.
Thanks for sharing
You could put a windshield and some patina oil on it. To bad you don't have an old small block to put in it with that 3 speed people like when they run. I almost dropped my beer when I saw the inside of that motor and the look on your face was priceless. Another fun video keep them coming.
I know right, man when Mortske lifted the intake off that thing I thought holy crap that things dirtier than Duff after finding a virgin mud pit to roll around in.
I can never get over how long the nose is on those, and how much room they have in front of the engine, and yet the back of the engine is still jammed into the firewall.
What a shame !! However , You did bring it around and make it into a very pretty piece of classic 1957 Chevrolet . You have a way with words as well as the tools to make this station wagon look like a diamond in a coal mine . Some times you have to go round the Sun to meet the Moon but its the outcome that's important , and you were very successful . Thank you for the work you do to bring these videos to us . Mortske , you are the man !! and I love your honest , and humorous approach to every situation , Stuart in Canada ..
Our pleasure
Even in the late 60s and the 70s, 57 Chevys were popular. They still are. But for me, I love a 40s coupe. Still.. station wagons have always had a special place in my heart
Mortske's the Man. Cool Thanks
My name is Bernie, thanks for the love, bro! Not a tow truck though…lol
Got it!
Nice job sir Nice chevrolet 1957 Nice show sir 😃👏👏👏👏👍👍👍👍
Thanks 👍
I opened up a sbc oh a couple of years ago now. And when I popped the intake off the lifter valley was full of dog food!! Talk about a surprised guy when I seen that.
Mice love dog food.
Better than this!
Morkske Repair Friend Always good watching your videos and Duff the dog !! And even though the 57 Chevrolet Station Wagon sbc 283 ci V8 engine was to for gone ,great job on you putting your work into the rest of the car too clean it up 🇺🇸🇺🇸🇺🇸😃😃💪💪👍👍👍👍
Thanks 👍
Mortske Mondays are the ONLY reason to get out of bed. Well, that and work.
Your making it affordable for someone to start a project and just put money in it weekly as you get paid. That's how we all built our rods when I was young. Sides jobs are awesome for making extra project cars.
glad to watch your show. no place like home.
Just ordered my Duff bobble head and the orange squarebody decal that matches my squarebody !! Duff will go on the dash and the decal will proudly be displayed on the rear window. Thanks for the entertainment!!!
Thanks for your support!
Mo Jo looked like he was about to throw down a serious rap he kinda looks like Emimen just an older version. Utube gold that guy!!!!!!!
Mojo rocks.
Mc Mojo. 😂
I've been eyeing this in the background as I have a hankering for a tri-five wagon, as soon as I saw it was $3000 I knew it wouldn't run! It's a good price, i've seen a ton of total junk for waay more and this one's now been on tv!! Thanks Mortske!
Our pleasure
Yeah Duff get in there nice and deep 🤣🤣🤣🤣🤣
woohoo!! Another amazing Mortske Monday video! Thanks again for all your hard work to produce these sir. So many of us seriously enjoy your vast knowledge and amazing work ethic!
Glad you enjoyed it!
That engine is well done. The mouses made the best home of the engine. I have never seen anything like that. Great video learn something new every day. 😊
Thanks for the visit
@@MortskeRepairthat's why SBC called mouse motor
MORTSKE MONDAY!!! Right on schedule.
Cool color change.i wouldn't have thought of that..😊
Whammmmmyyyy😁
😊😊Very satisfying episode. My dad had a 57 wagon and it was the first car I drove. Wish I had the time to finish it off.
1st Monday after surgery!! Mortske Mondays rules!!
Get well soon brother.
Hi Mortski and Duff and his Pop nice video 📹 and workmanship I love that car inside and out paint job from Earl Shibe
Have a full size Duff Bobble in the back or around the vehicle
Or Pudding 🍮 full also say do Duff do You want a Bisket or Pudding For looks for yard art 🎨 🤔
Totally agree with washing the crud off before working on a new project, especially the engine/bay, knock all the webs off and run off the critters and their stinky nests. But these guys who completely detail a car that's been in a barn 30+ years and they haven't even checked to see if it turns over, that's just bad luck.
Thanks for another good one Mr. Mortske! Nice job on making that old heap look nice again!
Thanks for watching
ive been in the trade since 84. We had a car come with a seized motor no oil. We replaced the motor and got it running and found the gearbox was seized too. No you are not a hack mechanic Dr Mortske. You are an automotive surgeon of the first order. Do what most of us mechanics do . Have a sandwich or 3. The shakes stop after the first 6 sandwiches. You're giving up! Its only a couple of rusty pushrods LOL I knew it was going to be bad when you had to cut the distributor off. Love your channel.
I learned a lot on the paint cleaning and the hub cap restoration today. Thank you Sir.
Glad to help
The bigger disappointment in my younger life was buying 3 sets of factory Corvette valve covers and realizing they wouldnt work on later sbc , I had them for 20 yrs and a Corvette guy found out I had them and offered big money , I finally found justice after 20yrs
Very cool comment thanks for sharing.
Nice!
@@larrydixon-vi7ld schwiiiiiiinng😅
I’m subscribed to Dan I never miss a video and he always gets a thumbs up 👍
Mortske repair it looks awesome blue actually blue is my favorite color 🤩
Good choice!
@@MortskeRepair hopefully you get it running with a windshield in it so I can see you drive it before it's gone
Great revival, even if it didn't run , thanks for sharing 👍💨💨
You bet
I spotted that in the back of your other vid & I'm not a big tri five guy either but something about that wagon just does it for me! Love that blue 2 tone, Bro! This made me happy when I woke up this morning! ✌️from Ohio
Right on
Have fun with it, everyone has a first time choppin one up. Perfect candidate.
You are doing the Lord's work by instructing the youths on how to add value to the junk rusting away at pap-pap's farm. It takes skill to polish turds into project car gold.
Absolutely
@@MortskeRepairamen😮
Mortske i enjoy watching your videos i loke the one you did for your dad on the buick ls swap i thought you did a great job i have watched you before you got bigger i enjoy you videos more than vice grip i lost my dad 7 weeks ago and it has been rough i miss him alot i was also a mechanic welder and electrian 3 back surgerys ended that but i love your vidoes and that video was not to long i wished that you would do some more ls swaps detail for detail i could watch it even if it was 4 hours in segments to see what all needs done like in a sqaure body chevy pick up ill allways be partial to the 350 chevy or 454 but those are getting harder to find they have either been scrapped or used in drag cars everyone wants a ls engine now plus there are s bunch of them anyway i appreciate what all you do and i sure enjoy watching your videos thank you very much from Alabama
Sorry for your loss
Those 57s are very simple cars to work on unless you are a whiner. I had 3 different ones back in the mid 60s when I was in high school. Had to put an engine in one of them. You might fall in love with it. It was easy to find parts for them back then. The 57s were the first year of the 283 so unless it was built in late 56 yours should be a 283.
If the 57 Chevy's came with a 283 it would have had a gold "V" on the hood and tailgate, otherwise it would be a 265.
283 was stock engine in 58.
Wesley’s is now Black Magic and I use it on my whitewalls and raised white letters with no issue. I’ll have to try the Magic Eraser trick. Massive improvement on the old 57. Looks like a different car now.
Good to know!
Sassy old wagon👌👍👍👌
When I was growing up in Boulder Co. there was a Ledgen of hubcap Anny. She would go around picking up hubcaps off the side of roads and turn around and sell them.
Nice
Another Sir Mortske Video 🙀🙀🙀🙀 ‘Great’
Good Great Grand Wonderful!!
@@chicagovasko😂😂😂😂
Thanks again!
@@MortskeRepair no problem hey taker easy bud.
Love the videos, and am glad you are not doing the 50 and 60 thousand dollar stuff that most of us cannot afford. Back
in 1965 I think it was, my grandfather traded his 54 Chevy BelAir 2door and a shotgun and 25 bucks for a 1957 Chevy
wagon with only 29 thousand miles on it. Six cylinder and standard trans and it had a radio and two rear view mirrors,
and several options. He kept that car until he passed away in 1982 at the age of 92 years old. The wagon was still going
strong when I sold it to an old codger that I knew would take care of it. Thanks again for the videos. They are entertaining
while we can learn some things. Thank you.
Thanks for sharing
DD Speedhack could have that baby back on the road in a weekend..he should own that gem😊
Likely
@@MortskeRepair wood switch to baby moons for a qwiker sale though
that wagon sure is a cool looking car...too bad it needs so much but it has a lot of good parts and could be a great donor...thanks mortske!!🍺
Right on
A Real Chevy 😊
@@rickreese5794 TRI fives rule 2057
Another fantastic monday with Mortske, thanks for doing what you do.
Tip of the hat to Mojo and Chin.
Duff rocked it as usual too.
Thanks for that!
Yes Sir!!!
Awesome.
Thanks!
Wagons are cool. Even rusty ones. @@MortskeRepair
Ive been a viewer for a few yrs now mister mortikie and they jus keep getn better and duff is the king ❤😂
Much appreciated
The body was made by fisher and primed in red. The front clip was pre assembled by gm and primed in black. The more u know ?
Interesting
How they get the colors matched???
Cool find on the Alsport Tracker brochure and letter. I always wanted to play with. So many fun off road toys existed in that era.
Thank you 🤗
I am sure you know a guy that hoard tri-five parts that probably has a windshield for you .
I'd love tosee you put this one back on the road even as a four door! Pretty cool looking car. I have become fond of 50s and 60s wagons lately!
Right on!
I tried watching DD speed shop just couldn’t do it. That guy is a hot mess
Never finish anything right... just a hot mess as you said...
@@VintageTexas59naw crude but effective
as one of the fans who suggested the Ridgid shop vac I’m glad it’s living up to your expectations. Not that anyone in the comments wouldn’t be an expert of course.
Mortske your awesome brother I always learn stuff and you don't waste nothing you always save stuff which is smart. Have a good day.
51:19 I am pretty amazed at the Comet wash efforts, they turned the green fenders blue again. Definitely worth doing the whole car for wow factor in photos!
dang right!
The transformation of the front of this car was really something ......sure looks good....hope your doing well... wishing you the best!
Thanks, you too!
Thanks Mortske and Duff for all the videos.really Enjoy them.after work on Monday's and also more Mortske repair.later on. WHATA DEAL! 👍
Our pleasure!
Love it. Beautiful car 👍💯
Pudding Fab shop Blue 💙😊
Sir Thomas demonstrates in almost every video the practically subliminal demonstration of hard work ethic and how it translates to goal achievement. It’s the example of the experienced engineer who does not suffer fools gladly; yet, even with a growl or cheese and rice - perseveres and gets up the next day knowing the rock is in front of his door, then proceeds to push it up the hill - again. Inherently, he’s setting an example for the next generation. You can tell he’s doing the right thing - because God gave him Duff!
Thank you kindly
Dan, of DD, is so jealous right now. Sweet car.
I wish I could.... love that car....
Yeah 80s. Swap meets you could pick your parts and for couple hundred bucks you. Could assemble generic. SBC for projects..less if you waited til closing and scoured the. Piles of Chevy stuff left behind😅😅
that a pretty nice wagon, i bought my 57 210 wagon about a year ago with no engine or trans.
on 57 the center bumper bar is wagon only. you can use a car bumper it will fit it just don't have the flat spot where the tags go at . i put a regular car bumper on mine that i had in stock.
my wagon was sitting since 1972. it is running and driving now. i put a 350 & th350 in it and i got the brakes working.
Minute 37 - oh no, don't think this engine is ever going to run. Minute 43 - worst fears confirmed and then some. It has to be disheartening at times as you rip into these engines and discover how bad things really are. Props for hanging in there with them and doing your best to add some value for the next owner/s. I always enjoy your content, it's clear you enjoy what you're doing and you're educating/entertaining a large audience!
Thank you
1:08:46 "The Wall'The Ceiling'The Floor'The plumbing'The electrical" Sometimes I forget how fun Mortske's language can be
It was inspirational watching you adjust that rear cross member with that precision tool.
Precision work
Good show !! It's always fun and informative. See you next week
Thanks for coming
You're making me want that car even more now with those tires and white walls and hubcaps
Could be yours!
That's a 15k. Car
Hi sweetie. MamaCard sending love & encouragement.
Really enjoyed this video! If you liked the way it looked when it was wet & shiney, you could get some of the VGG Shine Juice from Derek. It can be wiped on or sprayed on & it would make it look amazing with that paint!! Thanks for the video!!
I did the Comet and steel wool on my Dodge truck. Looks amazing!! Thanks for the tip!!!
Right on!
Dude!!! Hard wood!!! Make any shape you need, and a wood or plastic mallet!!! The stump or sand bag for pounding on!!? Fun video!!!✌️
Thanks for the tips!
Another great Mortske Monday! Always nice to see Duff Dog Mojo and Chin
Glad you enjoyed it!
What a SCORE Mortske! Watchin from Alberta Kanada.
Another great Monday with Mortske and Duff and cool old 57 wagon. Thanks for another great video. Have good week.
Thanks, you too!
I was thinkin maybe a ratchet wrench on the sparkplug socket would work...eventually you got it . Good deal dude ! Keep up the good work brother✌️💯
Thanks for the tip
Been watching for years now, so I should know better, but the spider jump scare gets me every time 😂
My bad
@@MortskeRepair I know that's false 🤣
Great video. Thing turned out nice !
Thanks 👍
You made it pretty. I love it.
Thank you! 😊
If this RUclips thing doesn’t pan out, you could always do ‘Mortske’s Detail Shop’ with the Comet bucket? 😂😂 But seriously, that color is amazing. Just the right amount of semi flat, and patina. Also, I finally got the support to your channel fixed, so that’ll help too. Be blessed brother.
Great idea!!
Good evening from Cape Cod ⛵ Wow! Surprise surprise when you lifted that intake, I've never seen anything quite that screwed up 😂 I wasn't sure where you were going to go with this car, man I'm quite surprised you dial that up to get rid of it. I agree with you, the more presentable you make a vehicle the more appealing it is. She looks pretty damn good sitting out there in front of the shop. Somebody will definitely buy it. Thanks for an enjoyable and different video ✌️🇺🇲
Our pleasure
Just love seeing what car you have next because I know we are going to get a history lesson as well as a good watch watch
Looks "really nice"! I appreciate all the project flipping tips!
I was excited when we found the engine was trash, first thing I thought of was that blower motor sitting around somewhere! I love a wagon with a blower!
A blown Faux-mad! Let's do it! (and let's, I mean you... I'll watch from home!)
Brilliant
Good video Mortske thanks for sharing as far as looks the car looks nice just setting there l agree with you on that
You bet
Great video man your awesome love the whole wheel and tire set up
Thanks 👍
Very interesting 🧐 an enjoyable content 😀. 57 is my year so I always enjoy anything with a 57 Chevy in the video. Thanks for sharing 😊.
Glad you enjoyed it
thank you, that was fun to watch. and night mares of sliding up on that divider.
"Briggs and scrap iron" should have been the name of that company from the start 😂
Agreed
That's a great base to work off of for someone. There's so many long roof clubs forming out there they've become more desirable. Someone will snatch that up and go with it.
Good stuff...yeah I agree summers are hard to beat....thanks...🔧🔧👍
You got that right!
Love it as usual. One of the best car shows on RUclips. Just wish you gave shout outs, especially to people that have sent you tools.😅
My bad
@MortskeRepair was just kidding, my friend. You are a busy man. Thank you for all you do. ❤️
Mortske Monday with another piece of hot garbage....YEA!!!!
And yes, those "Magic Erasers" are really pretty awesome and good for oh so many cleaning tasks!
Yes they are!