Worked like a charm! I bought a used 2017 Chevy Cruze LT with just one working fob and cut key. Bought another one (uncut) via Amazon and programmed both of them using your instructions and it worked seamlessly! Thanks for your help !!!
This procedure worked perfectly! I had one operational smart key and bought a genuine gm from ebay, did this procedure, making sure the blank smart key got programmed first, and both work fine...
Hi I want to tell you god bless you and your family as well you have explained every step very well no doubt about I programmed my new key with your clear xplanation. Thank you very much for making this video I hope other can see them and you get millions of views
THANK YOU SO MUCH! 2014 Chevy Cruze LT with push-to-start and a flip key fob. My only key randomly reprogrammed itself (still not sure how I accidentally made that happen) and the Chevy dealership was no help on the phone - they told me I'd have to tow it to them. My key fob had a live battery, was able to lock and unlock doors from a close distance, but was not turning the car on. Took about 40min of fumbling around but this video helped me fix it on my own and get un-stranded.
You can find the instructions. for a 2014 Chevy Cruse here www.ProgramYourRemote.com/classified/2014-chevrolet-cruze-keyless-entry-remote-key-fob-programming-instructions-listing-7475.aspx
I have a 2018 Chevy Cruz diesel and I’ve been trying to do your program system. I’ve lost all my keys I got a new key cut for my car and I’m trying to program it but it won’t come up on the screen where it says in program mode, am I doing something wrong, and yes, I turned the key five times to the left
Just programmed 2 remotes with no issue so I thought. I get error key fob left in car. I can turn that error off no problem. I use 1st fob no issue. Remote start everything. Use 2nd remote remote start no issue. Go back an hour later and remote start on both fobs no longer work and still got key left in car reminder when I open the car door. I have redone the process 3 times. Same issue all 3 times. 2017 Chey Cruze Premier keyless remote. Please help.
Dropped my keys while I was taking care of my girlfriend's car since she's in Alaska right now, lost the Fob, and she was ready to murder me. I ordered an unprogrammed fob and followed these steps with her spare key and hopefully this all works!
Tonight both original key fobs on my wife’s 2018 Cruze stopped working(tried new batteries and everything).I Can use the Chevy app to open the car and can start it with key fob in front cupholder. If I follow these instructions can you place both original fobs in the cupholder so it does both at the same time? Or can you only reprogram one at a time? My manual says it doesn’t apply for Canada. Is there any harm in trying?
You can only program one at a time. If you look at the steps in the description box for the video, you repeat steps 4-6 for each remote, after the first remote is programmed. However, the manual is correct that these are only for US market vehicles. I'm honestly not sure if there is any harm in trying, I think that you probably wont even be able to get the vehicle into programming mode.
Yes, you will just need to re-program your orignial fob during the procedure as it will be erased. If you look at the steps in the description box of the video, you need to repeat steps 4 - 6 for your original remote after the new remote is programmed.
You can use this procedure, you just need to reprogram in your working fob. If you look at the steps in the description box, or your owners manual, you will repeat steps 4-6 for each remote.
I have a 2017 Chevy Cruze RS with pushbutton start. Recently the key fobs randomly don't work. I have replaced both batteries in the 2 fobs and still have the problem randomly. I read on line that they might need reprogrammed. So will doing your instructions reprogram my fobs?
Hi there I really need your help with my dad's car..he had a daewoo lacetti 2010 diesel engine four cylinders and we don't have any oil element in our Napa Auto parts on our island..is there a way you know we can order directly to a dealer or a Auto parts store??help me out please..
I have a 2015 Chevy Cruze with a flip key but it's a push start, I've followed your steps but when I try to use the keys after programming, it says to insert key into transmitter to start, can you help me please?
So my original and only key fob had the circuit board fall out and drop on the ground when I was replacing the battery and now the key fob is damaged and doesn't work. The metal key still works in the door lock so my question is, if this procedure can work for me if I use the original working metal key with the new key fob that I want to program?
I have two fobs that are both programmed. I just want to reset them to test something. Will this work if it’s programmed already and I’m just resetting it?
Yes - this procedure will erase all fobs that are currently programmed so you will have to re-program them both. You will need to start the procedure with both fobs far enough away from the vehicle so they cannot be read. If you look at the steps in the description box of the video - you need to repeat steps 4-6 for the second remote after the first one is programmed.
friend This is Korea and it is a 2017 Chevrolet Cruise vehicle with a button start smart key. I already have 2 transmitters, but I followed the video to register 1 more But there is no response in the process below "driver door and turn the key to the unlock position five times within 10 seconds" Can you tell me why?
you don't technically have to get the new emergency key cut - you just need at least one to do the procedure. You will need to reprogram your current key fob during the procedure as it will be erased. If you look at the steps in the description box of the video - you need to repeat steps 4-6 for your original key fob after the new is programmed.
yes - you just need to reprogram your original as it will be erased during the procedure. If you look at the steps in the description box of the video, you need to repeat steps 4-6 for your original remote after the new one is programmed.
I have the spare cut key fob. The original with the key inside was lost. Do i need to order another keyless fob? Or can i just use the cut spare. If so means pulling the key out of the door will it still program so i can put it in the armrest lid.
It can but just changing the battery in your key should not require re-programming. Are you sure you installed the new battery correctly (Not upside down)?
So I haven't lost my keys, I have a working key/remote and just ordered a 2nd remote with blank key, does the blank key still need to be cut or can I use the key from my working remote to program the 2nd remote?
No, you can just use the emergency key from your original key fob. FYI - You will need to re-program your original remote during the procedure. If you look at the steps in the description box of the video - repeat steps 4-6 for your original remote after the new one.
If you look at the steps in the description box of the video - you need to repeat steps 4-6 for each additional remote after the first one is programmed.
Do I have to program two keys? I just did one key and I have a “service theft deterrent system” message when I start the car. Everything works besides the message. The car runs and drives fine but the theft light stays on
I ordered an extra fob as a spare. I noticed you said this only works if there is no original key/fob. Does this mean I cannot program the extra fob without erasing the original fob?
You just need to re-program your original fob during the procedure as it will be erased. If you look at the steps in the description box of the video - you need to repeat steps 4-6 for your original remote after the new one is programmed.
@PYR Automotive is correct...this happened to me as well, just one fob. So yes, his procedure works just remember to program the spare previously unprogrammed fob first, followed by the "known operational" fob, it will then remove it from memory and assign it to "remote 2#..both will work perfectly then..it did for me, and saved all those dealership fees..
I have a 2015 Cruze with no keyed ignition (button start only). Why do all instruction say to insert key in ignition? Your website says the same. Thanks!
It can be used but it needs to have been flashed/unlocked. These fobs lock to the vehicle after programming and need to be flashed before they can be used again.
Can I flash the fob or do I have to take it somewhere or is better to buy a new fob key? This is my situation: My only key fob is broken and the only thing that is not broken is the key in the fob, can I buy a new fob from ebay and this video you have should work with my situation? Or I need someone professional to program everything?
You will not be able to flash the fob yourself without the proper hardware and software. You can by a used fob but you need to make sure it specifically says "flashed" "unlocked" or "guaranteed programmable" or something along those lines. Yes, you can use the key out of your old fob in order to program a new one.
f you look at the steps in the description box of the video - you need to repeat steps 4-6 for each additional remote after the first one is programmed.
What if my the car just is no longer recognizing the key fob when you get into the car....note that this happened after the rear view mirror was snatched off the windshield and the wires broke.
Usually when the fob stops being recognized I would recommend replacing the battery in the fob but if it happened right when your mirror was ripped off I would guess that's the issue. Have you checked your fuses to see if any are blown?
honestly I don't know any of the fuse numbers off the top of my head but I just thought some of the wires that were left from the mirror may have ground out and popped a fuse. You may just want to take some time and just check them all. Other than that I'm not sure what to suggest.
I have 2016 Cruise with push button start. No instructions appear after first 10-minute step. Will go no further. Tried several times. What am I doing wrong.
you can use this procedure, you will just need to re-program your original remote as it will be erased during the procedure. If you look at the steps in the description box of the video, you need to repeat steps 4-6 for your original remotes after the new remote is programmed.
My car's (Chevey Cruze 2017 LT) key does work very well, whereas the remote start engine function does not work. How could I re-program it so I can start the car remotely? Thank you in advance.
That would not be something to do with programming. If you have the remote start option installed but it is not working, there is either an issue with the remote start button on your fob or an issue with actual remote start system in your Cruze.
Has the remote start ever worked? If not, your vehicle may just not have the remote start option installed. If it worked on your old remote but no the new remote, I would try replacing the "new" remote again.
This is a 2017 South Korean cruise car. There is no response to the instrument cluster after removing the key cap and turning the key 5 times to the left.
Yes. If you look at the steps in the description box of the video, you need to repeat steps 4-6 for each remote, after the first remote is programmed. A maximum of 8 can programmed at one time.
You can use this procedure to program multiple fobs. If you look at the steps in the description box of the video - you repeat steps 4-6 for each remote after the first one is programmed.
4yrs later and you’re still helping others!! Thank you so much for this video, I was a damsel in distress 😂
You're Welcome! Glad it helped
Worked like a charm! I bought a used 2017 Chevy Cruze LT with just one working fob and cut key. Bought another one (uncut) via Amazon and programmed both of them using your instructions and it worked seamlessly! Thanks for your help !!!
Nice! You're Welcome!
Hello, can you please provide the Amazon link for the keyfob? Thanks.
This procedure worked perfectly! I had one operational smart key and bought a genuine gm from ebay, did this procedure, making sure the blank smart key got programmed first, and both work fine...
Hi I want to tell you god bless you and your family as well you have explained every step very well no doubt about I programmed my new key with your clear xplanation. Thank you very much for making this video I hope other can see them and you get millions of views
Thank you for the kind words!
You have explained each and every step very well.... thanks
How would that work if no push start
THANK YOU SO MUCH! 2014 Chevy Cruze LT with push-to-start and a flip key fob. My only key randomly reprogrammed itself (still not sure how I accidentally made that happen) and the Chevy dealership was no help on the phone - they told me I'd have to tow it to them.
My key fob had a live battery, was able to lock and unlock doors from a close distance, but was not turning the car on.
Took about 40min of fumbling around but this video helped me fix it on my own and get un-stranded.
Glad you got it to work!
Where did you get your push to start?
@@gerardogarza6470 I got the car used at a Toyota dealership
Thanks so much for posting. Saved me service fee at dealership and 2hrs of my life they would have wasted! 2019 Chevy Cruze RS Premier
You're Welcome! Glad it helped
This helped me today. I wanted to thank you for this post!
You're Welcome! Glad it helped
Perfect! Works great !! Thanks 😊 🙏 I did it!
Great! You're Welcome!
great vid. Slow and very well explained, ty.
Thank you!
I got stranded at a gas station watch this whole video and my car started thank you so much. I was so pissed the car did not want to start.
sounds sketchy but I'm happy it helped!
Program Your Remote when u don’t wanna pay for a tow or pay the dealership you’ll try everything else first.
Bro u Are Tha Man! U got me rollin!
Glad it helped!
Nice looking Chevy Cruze
It’s not a Chevy cruze it is a Cadillac
Awesome video....thanks!!
You're welcome!
Works great cruze 2019
Great!
Hello, you’re tutorials are great ! what do I do if my 2014 Cruze LTZ doesn’t have a slot for the key, only a start button.? Thank you
You can find the instructions. for a 2014 Chevy Cruse here www.ProgramYourRemote.com/classified/2014-chevrolet-cruze-keyless-entry-remote-key-fob-programming-instructions-listing-7475.aspx
M from Ladakh n there is no such a workshop near by me . I can order a smrt new key but it will be program how I can do it plzz
I have a 2018 Chevy Cruz diesel and I’ve been trying to do your program system. I’ve lost all my keys I got a new key cut for my car and I’m trying to program it but it won’t come up on the screen where it says in program mode, am I doing something wrong, and yes, I turned the key five times to the left
Just programmed 2 remotes with no issue so I thought. I get error key fob left in car. I can turn that error off no problem. I use 1st fob no issue. Remote start everything. Use 2nd remote remote start no issue. Go back an hour later and remote start on both fobs no longer work and still got key left in car reminder when I open the car door. I have redone the process 3 times. Same issue all 3 times. 2017 Chey Cruze Premier keyless remote. Please help.
Dropped my keys while I was taking care of my girlfriend's car since she's in Alaska right now, lost the Fob, and she was ready to murder me. I ordered an unprogrammed fob and followed these steps with her spare key and hopefully this all works!
Did it?
@@newcodiscgolf worked like a charm. I bought a coffee and chilled out since it really does take forever though
Awesome! And yes, it certainly does take some time.
Tonight both original key fobs on my wife’s 2018 Cruze stopped working(tried new batteries and everything).I Can use the Chevy app to open the car and can start it with key fob in front cupholder. If I follow these instructions can you place both original fobs in the cupholder so it does both at the same time? Or can you only reprogram one at a time?
My manual says it doesn’t apply for Canada. Is there any harm in trying?
You can only program one at a time. If you look at the steps in the description box for the video, you repeat steps 4-6 for each remote, after the first remote is programmed. However, the manual is correct that these are only for US market vehicles. I'm honestly not sure if there is any harm in trying, I think that you probably wont even be able to get the vehicle into programming mode.
I still have my original fob but would like to have a back up. Is there any way you can have two fobs programmed for one car?
Yes, you will just need to re-program your orignial fob during the procedure as it will be erased. If you look at the steps in the description box of the video, you need to repeat steps 4 - 6 for your original remote after the new remote is programmed.
What is the procedure if have the flip key like you said 35 seconds into the video?
I have a 2017 Chevy Cruze with 1 fob w/ auto start, will this work if I just want an additional key?
You can use this procedure, you just need to reprogram in your working fob. If you look at the steps in the description box, or your owners manual, you will repeat steps 4-6 for each remote.
What do you do when your key fob won’t release your emergency key? Is there another way to get it out without breaking the fob?
I have a 2017 Chevy Cruze RS with pushbutton start. Recently the key fobs randomly don't work. I have replaced both batteries in the 2 fobs and still have the problem randomly. I read on line that they might need reprogrammed. So will doing your instructions reprogram my fobs?
This will re-program the fobs but I think you may have other issues as the fobs should not act that way and they do not typically un-program
Only step I don't understand is do I leave fob out of the vehicle until 3rd step
I have the chevy 2016 cruze ls without the push to start how do i do it
Hi there I really need your help with my dad's car..he had a daewoo lacetti 2010 diesel engine four cylinders and we don't have any oil element in our Napa Auto parts on our island..is there a way you know we can order directly to a dealer or a Auto parts store??help me out please..
I'm really not sure to honest, maybe try to get in touch with a Daewoo dealership?
Between steps one and two when I’m waiting the first 10 mins should I be in the car with the remote or stand out and wait
It doesn't matter, you don't need stay in the vehicle if you don't want to. I got out of the car each time to wait in the video.
After turn the key in the door do take the key and put key back in remote or do you leave it in the door
It doesn't matter either way
I have a 2015 Chevy Cruze with a flip key but it's a push start, I've followed your steps but when I try to use the keys after programming, it says to insert key into transmitter to start, can you help me please?
If you have followed the procedure closely with no success, there could be an issue with the key you are using.
I have a key used with the same frequency for a 2016 cruze, can the key be added to another cruze that already has a key?
The key will need to be "unlocked" by someone with the correct equipment before it can be programmed to a different vehicle.
So my original and only key fob had the circuit board fall out and drop on the ground when I was replacing the battery and now the key fob is damaged and doesn't work. The metal key still works in the door lock so my question is, if this procedure can work for me if I use the original working metal key with the new key fob that I want to program?
Yes, you can just use your old metal key in your new remote and for the procedure.
Dit it work brother?
this process also works on models in which the key and chip 4a?
Im not sure what you mean by chip 4a
I have two fobs that are both programmed. I just want to reset them to test something. Will this work if it’s programmed already and I’m just resetting it?
Yes - this procedure will erase all fobs that are currently programmed so you will have to re-program them both. You will need to start the procedure with both fobs far enough away from the vehicle so they cannot be read. If you look at the steps in the description box of the video - you need to repeat steps 4-6 for the second remote after the first one is programmed.
friend
This is Korea and it is a 2017 Chevrolet Cruise vehicle with a button start smart key.
I already have 2 transmitters, but I followed the video to register 1 more
But there is no response in the process below
"driver door and turn the key to the unlock position five times within 10 seconds"
Can you tell me why?
Was the vehicle built in the US? These instructions will only work on vehicles built for the US market
Hi, I lost my spare key but still have one remaining key. Once I get the new key I ordered, I still need to cut my key and re-program both keys?
you don't technically have to get the new emergency key cut - you just need at least one to do the procedure. You will need to reprogram your current key fob during the procedure as it will be erased. If you look at the steps in the description box of the video - you need to repeat steps 4-6 for your original key fob after the new is programmed.
Can I still do this if I’m trying to add another key? I have 1 fob and I bought a unprogramed on online and need to program it.
yes - you just need to reprogram your original as it will be erased during the procedure. If you look at the steps in the description box of the video, you need to repeat steps 4-6 for your original remote after the new one is programmed.
I used this video to program my car and it worked great! Now my car is saying service theft deterrent system. Do you know how to fix this?
Programming a second key should fix that
Do you press the brake pedal while doing the programming or not? Does it matter either way?
You don't press the brake pedal but not sure if it will have any effect if you do
@@PYR-Auto thank you.
I have the spare cut key fob. The original with the key inside was lost. Do i need to order another keyless fob? Or can i just use the cut spare. If so means pulling the key out of the door will it still program so i can put it in the armrest lid.
I'm not quite sure what you mean, are you trying to program your spare key fob? If it's a spare wouldn't it already be programmed?
I lost my keyless fob an havent program the backup all i have is a cut fob not program. Its a switchblade key fob.
Okay, yes you can use this to program your spare flip key - as long as your Cruze has push button start
Does this work if my original key for some reason isn’t working or being recognized after a battery change?
It can but just changing the battery in your key should not require re-programming. Are you sure you installed the new battery correctly (Not upside down)?
My 2016 chevy cruze remote start stop working do I use the same steps as shown in this video
Usually remotes do not randomly unprogram so you may have other issues. Have you tried replacing the battery in the remote?
@@PYR-Auto i had new batteries put in my fobs . And when I try to remote start my lights flash
So I haven't lost my keys, I have a working key/remote and just ordered a 2nd remote with blank key, does the blank key still need to be cut or can I use the key from my working remote to program the 2nd remote?
From what I understand, you don't need to cut the key for the fob to be programmed.
correct!
No, you can just use the emergency key from your original key fob. FYI - You will need to re-program your original remote during the procedure. If you look at the steps in the description box of the video - repeat steps 4-6 for your original remote after the new one.
@@PYR-Auto So it will say "Remote 1" (the new remote) then "Remote 2" (the original remote) during programming?
Yes
Can you verify if this method works for a 2018 Chevy Cruze built in Canada? I'm having trouble getting into remote learning.
this does not work on Canadian built vehicles
How do you program multiple key fob for a 2016 Cruze???
If you look at the steps in the description box of the video - you need to repeat steps 4-6 for each additional remote after the first one is programmed.
Do I have to program two keys? I just did one key and I have a “service theft deterrent system” message when I start the car. Everything works besides the message. The car runs and drives fine but the theft light stays on
Yes - Programming a second key should resolve that
I also have the theft light, but only have 1 key fab. What should I do?
Hi, this worked but, it insist on a second fob and gives Theft Deterrent message.. hope to I clear that out?
You will need to program a second fob in order to fully exit programming mode in that case
Can you put a link for adding a smart key please and thank you
www.programyourremote.com/classified/cruze-browse-166.aspx
I ordered an extra fob as a spare. I noticed you said this only works if there is no original key/fob. Does this mean I cannot program the extra fob without erasing the original fob?
You just need to re-program your original fob during the procedure as it will be erased. If you look at the steps in the description box of the video - you need to repeat steps 4-6 for your original remote after the new one is programmed.
@PYR Automotive is correct...this happened to me as well, just one fob. So yes, his procedure works just remember to program the spare previously unprogrammed fob first, followed by the "known operational" fob, it will then remove it from memory and assign it to "remote 2#..both will work perfectly then..it did for me, and saved all those dealership fees..
What if you need to program multiple key fobs
If you look at the steps in the description box of the video - you need to repeat steps 4-6 for the each remote after the first one is programmed
Can u explain plzzz it's very urgent
I have a 2015 Cruze with no keyed ignition (button start only). Why do all instruction say to insert key in ignition? Your website says the same. Thanks!
All the information we have, and I'm guessing everywhere else you have seen, shows the push button start wasn't available on the Cruze until 2016
Read the manual. It lists all the ways to program a Fob whether you have one or not. There is a hidden key slot under your small change holder.
Does this work for multiple remotes?
If you look at the steps in the description box of the video, you repeat steps 4-6 for each remote, after the first remote is programmed.
Hi, My only key is not working, I want to buy a used key fob, does it have to be a new key for the programming to work? Thanks
It can be used but it needs to have been flashed/unlocked. These fobs lock to the vehicle after programming and need to be flashed before they can be used again.
Can I flash the fob or do I have to take it somewhere or is better to buy a new fob key? This is my situation: My only key fob is broken and the only thing that is not broken is the key in the fob, can I buy a new fob from ebay and this video you have should work with my situation? Or I need someone professional to program everything?
??
You will not be able to flash the fob yourself without the proper hardware and software. You can by a used fob but you need to make sure it specifically says "flashed" "unlocked" or "guaranteed programmable" or something along those lines. Yes, you can use the key out of your old fob in order to program a new one.
How do you program multiple key fobs for a Cruze???
f you look at the steps in the description box of the video - you need to repeat steps 4-6 for each additional remote after the first one is programmed.
So if I buy a new key, I cant program it without being cut correct or can I use the cut key from my other fob?
You can use the cut key from another fob
What if my the car just is no longer recognizing the key fob when you get into the car....note that this happened after the rear view mirror was snatched off the windshield and the wires broke.
Usually when the fob stops being recognized I would recommend replacing the battery in the fob but if it happened right when your mirror was ripped off I would guess that's the issue. Have you checked your fuses to see if any are blown?
@@PYR-Auto I checked fuse 53 for the mirror but thats the only one I know.
honestly I don't know any of the fuse numbers off the top of my head but I just thought some of the wires that were left from the mirror may have ground out and popped a fuse. You may just want to take some time and just check them all. Other than that I'm not sure what to suggest.
Can I try this way to Cruze 2015?
A 2015 cruze should use a different procedure. You can find that video here ruclips.net/video/qrF_q_XX5Cg/видео.html
How to start 2009 model cruze with new smart key?
The 2009 Cruze was only built for use outside of the US market and unfortunately I don't have any programming information for that
I have 2016 Cruise with push button start. No instructions appear after first 10-minute step. Will go no further. Tried several times. What am I doing wrong.
try just going off of the time rather than the messages
What if I have an already working key and want to program another one?
you can use this procedure, you will just need to re-program your original remote as it will be erased during the procedure. If you look at the steps in the description box of the video, you need to repeat steps 4-6 for your original remotes after the new remote is programmed.
@@PYR-Auto THANK YOU!
Sir tried this steps still it is showing Code 91 anticipate answerplease thanks. Green Goa
I'm not familiar with code 91
I get a message saying service theft deterrent system after pairing my fob.
Programming a second remote can resolve that
My car's (Chevey Cruze 2017 LT) key does work very well, whereas the remote start engine function does not work. How could I re-program it so I can start the car remotely?
Thank you in advance.
That would not be something to do with programming. If you have the remote start option installed but it is not working, there is either an issue with the remote start button on your fob or an issue with actual remote start system in your Cruze.
Program Your Remote
So What do you recommend I have to do.
Has the remote start ever worked? If not, your vehicle may just not have the remote start option installed. If it worked on your old remote but no the new remote, I would try replacing the "new" remote again.
How does the second key program...
If you look at the steps in the description box of the video - you need to repeat steps 4-6 for each remote after the first one is programmed
How is this supposed to work Chevy Cruze if that is A Cadillac that your working on?
this procedure works on many different GM models
During the 10min wait does the door stay open
it can be open or closed
Are you to leave the key in the door the whole time?
it won't matter either way
Can I use a used key fob from a junk yard?
No, a used fob needs to be flashed/unlocked. These fobs lock to the vehicle after programming and need to be flashed before they can be used again.
This is a 2017 South Korean cruise car. There is no response to the instrument cluster after removing the key cap and turning the key 5 times to the left.
I don't believe this will work on vehicles for built for use outside of the US market
Can you program 2 Remotes
Yes. If you look at the steps in the description box of the video, you need to repeat steps 4-6 for each remote, after the first remote is programmed. A maximum of 8 can programmed at one time.
What happens if all the steps are followed and nothing happens?
If you're getting the vehicle into programming mode but the remote is not responding, there may be an issue with the remote you are using
how you program a key i mean a copy
You can use this procedure to program multiple fobs. If you look at the steps in the description box of the video - you repeat steps 4-6 for each remote after the first one is programmed.
Can Walmart cut the key?
Some can - it just depends on the key cutting machine they have
Does not work with keyed ignitions
correct
@@PYR-Autoso how do I program with keyed ignition fobs?
Who was the asshole engineer at Chevrolet that came up with a 30 minute process to reprogram a key? Damn thats insane.
Same guy that thought a push start was an extraordinary idea 💡
thats a Cadillac
Yeah its an XTS in the video - this proceudre works on many different GM models
Title says Chevy Cruze but the car is a Cadillac. Different procedure for a Cruze.
they’re both GM. they made them the same processes.