I've been working on my own ten drive-wheel engine. And this is a relatively interesting technique for a 10 wheel engine. Apart from the use of unofficial Lego parts.
@Beregorn88 not condoning it, but I think it's funny they get rich off this whilst Lego sits there with all those ideas and end up seeming to do nothing with them.
@@Switchblade-sh3kx oh no, they steal fan ideas too: for example 3 out of four sets of the new botanical line were proposal on lego ideas that reached 10'000 supporters, but never got accepted; then a year later they appeared on the shelves...
I had the misfortune of buying this set. Even getting it delivered was a huge pain as while they charged my card they did not provide any sort of invoice until I went to contact paypal to get it reversed. Only then did they decide to actually send the product. The quality of the set itself was dire. The USB with the instructions had multiple pages that were corrupt and unreadable. The parts poorly fit together, most bricks were warped or would have gaps when fit together. Rods would barely fit into wheels and were almost impossible to remove after. Wheels turned poorly, with the flanges rubbing against the clips to hold the brake caliper detail, motors were non-functional etc. A large number of parts were flat missing like the upside down 1x1 clips that are supposed to be used to hold red piping under the main body. The connecting rod assembly on the wheels is flimsy as hell and is extremely unlikely to handle actual operation. The entire rear cab and coal bunker is supported by a mere 4 jumper plates meaning even looking at it funny will have the entire thing detach and come loose as there's just nothing holding it together. Do yourself a favour and never waste money buying from this knockoff site. If you want a classic steam train you're better off looking for a set of plans on rebrickable and then sourcing the parts from brick-link or lego themselves.
Hi there, please if possible can you let me know how obtain pdf copy of this MOC. I have ordered and received shipment of this MOC but building instructions missing even though it mentioned on Letbricks website shipment will contain building instructions pdf pen drive. I don’t know who’s did the mistake desinger or Letbricks but I am stuck in the middle. I ordered 3 MOCs but unfortunately they arrived without building instructions and it is struggled to contact Letbricks due to poor customer services.
Been having gear problems with this model, and I have no idea how to fix it. The motors work well, but hey gears are too hard for the motors to turn, I have tried moving the axels so the gears are more lose but it still doesnt seem to work. Any help is appreciated
Hello, i've got a question: When I buy the MOC, will I geht all the pieces, which I need for the whole locomotive (inclueded the motor and remote control)? Or will I have to buy some pieces myself? Thank you very much!
From seeing another RUclipsr (can’t remember his name) review another lego steam train from this company, it seems that when you buy the MOC, you get all the pieces needed and the PDF instructions Edit: Found him, name’s ToledoRail and he did a review on the Big Boy MOC from LetBricks
Ahhhh I would be so anxious if I had this, the build looks so unstable. Like if it fell off a shelf or got fumbled around in a box, I feel like it would crumble. So many details held by one stud and a prayer just has me cringing. Over all the model is great though. And I like the gear system, it's a fun mechanic and I like spinny bits.
Why you've skipped the most interesting part in the model? Like all this inverted parts that you need to attach to the model from the bottom without studs, using some "special" stud that should connect them? I've used glue to make them hold, how about you? At 11.17 I see you also used glue. But for some reason have shown assembly of different part first.
What is the effect of the Differential (mechanical device) connecting the 2 motors? If one motor dies does the other still work? Another subject: from my experience, it´s better to use technical pins to fix the motor(s) to the train chassis.
That puzzled me, as well. By putting both motors on the same side of the receiver, there are only 8 possible speeds for the motor. By putting one motor on each side, there are 16 possible speeds. Running the motors in opposite directions is a bad idea. The important aspect of the differential is that both motors are not forced to run at the same speed, so the slower motor does not drag on the faster motor.
hi I realy like your videos and instead of only doing German and USA engines i have an idea why dont you have a playlist building 1 engine from every country. p.s. I don't mind if you don't also i' ve liked and subscribed
![Gucci Mane & Sexyy Red - You Don't Love Me [Official Music Video]](http://i.ytimg.com/vi/j7IBqyFKT4c/mqdefault.jpg)
please do more of these letbricks train builds, they're my absolute favourite!
I've been working on my own ten drive-wheel engine. And this is a relatively interesting technique for a 10 wheel engine. Apart from the use of unofficial Lego parts.
Although this is not a LEGO part, the quality is not bad. If you are willing to try.
@@Tinaviya That's not a problem. As long as the instructions are compatible, I can recreate these knockoff builds with official Lego parts.
Remember to credit the MOCs creator when you do.
@@afoxwithahat7846 Well, this MOC is of my own design. And it's also a GER Decapod.
@@joeleboeuf Nice
Looks like I will be adding this to my collection of bricks! Some of these sets are better than LEGO
Wow my liebe Dampflok von der Harzer Schmalspurbahn
ITS beautiful!
BUT WE WANT SUPER SHIPS TOO!!!!
Impressive maybe i like this set
Sometimes, unofficial Lego sets are better than official Lego sets
It's not an unofficial lego set, it's a crappy chinese counterfeit, and most often than not the design is stolen from Lego fans
A non-LEGO MOC might be prettier. But Lego is great too!
In most of the cases!! 😂
@Beregorn88 not condoning it, but I think it's funny they get rich off this whilst Lego sits there with all those ideas and end up seeming to do nothing with them.
@@Switchblade-sh3kx oh no, they steal fan ideas too: for example 3 out of four sets of the new botanical line were proposal on lego ideas that reached 10'000 supporters, but never got accepted; then a year later they appeared on the shelves...
Eine echte Schönheit
Thank you 😀
the wonders of german technolagy
it looks like a longer BR80 so i think ots german
@@frenchperformer5401 like the Swiss they are pretty good at making things that'll last a long time
Me before I see the title: uh this is a German locomotive
Me after doing that: oh I’m dumb it’s in the title
And uh that must be heavy
Gorgeous
I see you have done the titanic yet can you do that set please
Titanic? You'll see a boat in the following video.
I had the misfortune of buying this set. Even getting it delivered was a huge pain as while they charged my card they did not provide any sort of invoice until I went to contact paypal to get it reversed. Only then did they decide to actually send the product.
The quality of the set itself was dire.
The USB with the instructions had multiple pages that were corrupt and unreadable.
The parts poorly fit together, most bricks were warped or would have gaps when fit together. Rods would barely fit into wheels and were almost impossible to remove after. Wheels turned poorly, with the flanges rubbing against the clips to hold the brake caliper detail, motors were non-functional etc.
A large number of parts were flat missing like the upside down 1x1 clips that are supposed to be used to hold red piping under the main body.
The connecting rod assembly on the wheels is flimsy as hell and is extremely unlikely to handle actual operation.
The entire rear cab and coal bunker is supported by a mere 4 jumper plates meaning even looking at it funny will have the entire thing detach and come loose as there's just nothing holding it together.
Do yourself a favour and never waste money buying from this knockoff site. If you want a classic steam train you're better off looking for a set of plans on rebrickable and then sourcing the parts from brick-link or lego themselves.
Bought 3 trains from there. Everything was (apart from minor errors) fine.
This train was crap to buy, wish I saw this comment sooner
Can You build a Union Pacific ES44AC.
I will literally praise you!
sure
@@Tinaviya Bro THANK YOU!!!
@@Tinaviya ehh is it done yet?
Hi there, please if possible can you let me know how obtain pdf copy of this MOC. I have ordered and received shipment of this MOC but building instructions missing even though it mentioned on Letbricks website shipment will contain building instructions pdf pen drive. I don’t know who’s did the mistake desinger or Letbricks but I am stuck in the middle. I ordered 3 MOCs but unfortunately they arrived without building instructions and it is struggled to contact Letbricks due to poor customer services.
Can you show how it runs on tracks?
Yes show running
My doesn't
Beautiful, I would love to do something similar on my channel as well
Been having gear problems with this model, and I have no idea how to fix it. The motors work well, but hey gears are too hard for the motors to turn, I have tried moving the axels so the gears are more lose but it still doesnt seem to work. Any help is appreciated
Hello, i've got a question:
When I buy the MOC, will I geht all the pieces, which I need for the whole locomotive (inclueded the motor and remote control)? Or will I have to buy some pieces myself?
Thank you very much!
From seeing another RUclipsr (can’t remember his name) review another lego steam train from this company, it seems that when you buy the MOC, you get all the pieces needed and the PDF instructions
Edit: Found him, name’s ToledoRail and he did a review on the Big Boy MOC from LetBricks
Okay, thank's a lot!
man i like it nedd to buy one but its in USA
I’ve actually been looking at this set for a while now, I’m guessing the instructions are on that usb stick or pdf files?
Ahhhh I would be so anxious if I had this, the build looks so unstable. Like if it fell off a shelf or got fumbled around in a box, I feel like it would crumble. So many details held by one stud and a prayer just has me cringing. Over all the model is great though. And I like the gear system, it's a fun mechanic and I like spinny bits.
I wish those people would do DR 80 013
True
It was necessary to glue all these details at once.
Why you've skipped the most interesting part in the model? Like all this inverted parts that you need to attach to the model from the bottom without studs, using some "special" stud that should connect them? I've used glue to make them hold, how about you? At 11.17 I see you also used glue. But for some reason have shown assembly of different part first.
it is a good model.... but is it playable? is it solid enough?
Of course, the bricks are of good quality.
@@Tinaviya i was not reffering to the quality of the plastic... i was asking about the reinforcing of the internal structures.is it strong enough?
It is falling apart when you try moving it. For example when you rise it, from and back wheels detach.
Why do German steam engines always have red wheels?
WAIT CAN I BUY LA GRENOUILLE ON YOUR WEBSITE PLEASE
And I wanna build so can you put this on your website
where can i buy this set?
sure, pls check link.
What is the effect of the Differential (mechanical device) connecting the 2 motors? If one motor dies does the other still work? Another subject: from my experience, it´s better to use technical pins to fix the motor(s) to the train chassis.
That puzzled me, as well. By putting both motors on the same side of the receiver, there are only 8 possible speeds for the motor. By putting one motor on each side, there are 16 possible speeds. Running the motors in opposite directions is a bad idea. The important aspect of the differential is that both motors are not forced to run at the same speed, so the slower motor does not drag on the faster motor.
hi I realy like your videos and instead of only doing German and USA engines i have an idea why dont you have a playlist building 1 engine from every country. p.s. I don't mind if you don't also i'
ve liked and subscribed
will u make the C62 from japan?
Где купил?
Этот MOC взят с сайта letbricks.
A shame that it isn’t real Lego.
Where are the ships you create? 😴
they're allowed to branch off and cover other things
Do you want him to create his own boat or review a boat?
Dat valve gear tho…..
wonder how long until the Lego purists get here
You only like Lego right?
@@Tinaviya there's one. Took about a day
EU NAO QUOTEI
This increase h
Kvetch difference between my daughter-in-law kids with my life
Ukulele has
,light R😅
Me you’re Audi melody
H,bhr😮
P
😅
Ugju
The quality and the sound of the bricks being placed together sounds very poor, lol.