Love watching and learning from you sir. I also admire all ur tools 🛠! Not cheap is it? Thank you for the talented demos...wish I could sit and learn from you. Take care and be safe and stay healthy!
Your videos are so amazing never in my life have I seen such amazing talent,🤯🤯🤯 thank you so very much for sharing your amazing talent🤩🤩🤩, I love all your videos i hope someday i have at least one tenth of talent as you have! Keep shining 💖😊🤩 God bless😊😊😊
Awesome! Don’t you just love it when you’re all finished and it comes out of the tumbler all shiny like that!!!? Gorgeous! May I ask… how much would you charge for this piece? Just curious…
Hey thanks. Love hammered items. wanted to mention that I learned to polish the inside of rings with the conical piece which u used to hold ring to polish the outside. Perhaps you know this. it seems a bit faster with this tool as opposed to the tiny polishing tool...
Is that a silver weld? I just started and I’m using a syringe with flux and solder combined but my joints are weak and I’m thinking this stuff doesn’t work well or I’m not doing it right!
@@DynamiSJewelry I've got a question, have you ever used silver from sterling silverware before to make jewelry? Have you melted it down and made your our plate, sheets or wire from it?
@@roverman985 hi! Good question! No, never... Because silverware has plate-mark 800. So, this plate is very fragile! It impossible to make something without cracks... And we can not use this plate for Sterling silver jewelry. Also, it's really very hard to make 925 from 800, you never know what components are in that 800... The best way and very easy is to take 999 silver and make 925!
@@DynamiSJewelry thanks for reply. I was just wondering because I've seen another person melting down sterling silver handles off of silverware and he is making bars of sterling silver. So are you buying sheet silver from a supplier then to make jewelry?
What's the name of the attachment yo used to roll up the sandpaper? And also the name of the attachment you used to polish the inside of the ring? Or, is there a part number, etc? to help identify either of them?
I did some thin bands but when I put them on the ring tool to hammer to add some character, they came apart!!!! any tips? Thank you very much. I am learning a lot.
Tu tienes d joyero loq yo d licenciado. Oye nooo porque la plata el oro se trabajan se.cortan a mano no con esas maqinotas le qitas lo artesanal d el oficio lo q le da valor a nuestro trabajo
Получається просто дуже гарно. Сталь згладжує все дуже гарно, получається абсолютно інший результат. Дуже приємне на дотик. Ну, але не всі так роблять, тому розумію чому ви читаєте. По пробував кілька разів і побачив різницю.
Wow! It's wonderful to get to watch a professional at work. He didn't have the say a word to hold my attention. Love the ring.
I literally made this same ring today. Came on RUclips looking for other ideas, and saw this video. Our rings look the same. Way cool!!!!!!
That is a stunning piece of jewellery…love your hammer work…a pleasure to watch as ever…thank you 😊
i love that natural looks
Fascinating and a lovely ring. Wish it was on my finger.
Awesome!! What solution did you put into the tumbler?
Beautiful ring
thank you very much
Beautiful create...
Beautiful hammered look.
Thanks for watching
Beautiful end result ring!!
Beautiful piece
One hobby really cool
Love watching and learning from you sir. I also admire all ur tools 🛠! Not cheap is it? Thank you for the talented demos...wish I could sit and learn from you. Take care and be safe and stay healthy!
Thank you very much!
Do you need to certain kind of silver wire to solder?
At last step what you used in black jar for more shining and cleaning ring?
Your videos are so amazing never in my life have I seen such amazing talent,🤯🤯🤯 thank you so very much for sharing your amazing talent🤩🤩🤩, I love all your videos i hope someday i have at least one tenth of talent as you have! Keep shining 💖😊🤩 God bless😊😊😊
Beautiful! Thank you!
Gorgeous, may I ask, what else do you have in your tumbler besides soapy water?
Me too
amazing, I love it, I want one of these rings 🥰🤗💍💎📿
Thanks
Just follow the link in discription
Awesome! Don’t you just love it when you’re all finished and it comes out of the tumbler all shiny like that!!!? Gorgeous! May I ask… how much would you charge for this piece? Just curious…
Bellísimo, saludos desde Chile Concepción,✨🌞✨😘
Where do I buy the material and how thick should it be? Where did you get the ring size chart??
What kind of hammer do you use to create that hammered effect please? Thanks ☺️
Absolutely beautiful!! I am now following your Etsy page😍😍
thanks!
please, visit our website:
dynamisjewelry.com
What type of bench shear is that you have, can it cut 2mm 3mm silver sheets? I'm looking for good shear Thanks for the videos
Hey thanks. Love hammered items. wanted to mention that I learned to polish the inside of rings with the conical piece which u used to hold ring to polish the outside. Perhaps you know this. it seems a bit faster with this tool as opposed to the tiny polishing tool...
Nice
Thanks
I believe that ring blank sizing table is out by a half size. Try a half size smaller and it will be perfect.
au top comme d'habitude
Nice...
Is that a silver weld?
I just started and I’m using a syringe with flux and solder combined but my joints are weak and I’m thinking this stuff doesn’t work well or I’m not doing it right!
Quisten how thick is your silver plate
Hi what was that at the end of work ?
Very nice! I'd love to learn! What are you using to polish the ring? Is it some kind of sponge? Cheers
Pretty nice
Thanks
@@DynamiSJewelry I've got a question, have you ever used silver from sterling silverware before to make jewelry? Have you melted it down and made your our plate, sheets or wire from it?
@@roverman985 hi! Good question! No, never... Because silverware has plate-mark 800. So, this plate is very fragile! It impossible to make something without cracks... And we can not use this plate for Sterling silver jewelry.
Also, it's really very hard to make 925 from 800, you never know what components are in that 800... The best way and very easy is to take 999 silver and make 925!
@@DynamiSJewelry thanks for reply. I was just wondering because I've seen another person melting down sterling silver handles off of silverware and he is making bars of sterling silver. So are you buying sheet silver from a supplier then to make jewelry?
@@roverman985 I buy 999 silver, usually in coins, than make 925
And start making my jewelry 🔥
Thankyou Enjoyed
Is that just a bulk piece of silver and u cut it down to some?
would you be able to do one with pure 999 silver ?
What's the name of the attachment yo used to roll up the sandpaper? And also the name of the attachment you used to polish the inside of the ring? Or, is there a part number, etc? to help identify either of them?
Wow wow 🤩👍👍👍💜
Thank you for this video super helpful! I am about to make a similar ring- when you hammer the ring does it make it go up a few sizes?
What's the width of this band? Did you use flat silver for this or a large piece of sheet metal and just cut it to the width you wanted?
Is there a reason why people hammer texture while the ring is on the mandrel? Why not hammer texture onto the ring when it's not on the mandrel?
🤣🤣🤣🤣
Try
@@DynamiSJewelry I mean hammer it BEFORE you shape it into a ring shape. Wouldn't hammering it while it's flat make more sense? Idk, just asking.
@@bskilla4892 probably can be done in both ways
@@DynamiSJewelry cool, ty
@@bskilla4892 will try next time👍
What is the 10:01 can?
What bit are you using with the sand paper
220, 400, 800, 1000 and polishing
Magnifique beautiful
I did some thin bands but when I put them on the ring tool to hammer to add some character, they came apart!!!! any tips? Thank you very much. I am learning a lot.
Make thicker - 1.3/1.5 mm
And soldering quality should be good!
Thanks for watching
Sir y wash machin chahiye
Τελιο το κανατε ☺
this type silver u make the ring 925 or 990?
925
may i request u make review video diffrent between 925 silver and 990 silver, what kind of the diffrent, thnk u..😃
@@douyifang3368 the number represents the silver content, .925 would be 92.5% silver and the other 7.5% would be another metal.
Have you ever made a convex or a concave ring? I’ve been searching all over RUclips for a convex and cannot find a single video! You?
Could you please tool details
Sizes pls. How thick is it ?
1.5-2 mm
Tu tienes d joyero loq yo d licenciado. Oye nooo porque la plata el oro se trabajan se.cortan a mano no con esas maqinotas le qitas lo artesanal d el oficio lo q le da valor a nuestro trabajo
احسنت هذا عمل رائع
1:05 you are scratching a beautiful table
i want...😘😍
Зачем галтовать,после полировки?
Получається просто дуже гарно.
Сталь згладжує все дуже гарно, получається абсолютно інший результат. Дуже приємне на дотик.
Ну, але не всі так роблять, тому розумію чому ви читаєте.
По пробував кілька разів і побачив різницю.
Жаль ригель😟
disaster, files only cut in one direction.
Thank you for watching ❤️❤️❤️
Werbung ohne Ende...
the broken record playing in the background is SO BAD ...you should eliminate that crap & vid would be perfect
Nice work - music sucks!