It is very nice to see you review a tinywhoop. This betafpv is awesome! Sometime back I had a custom built meteor 65 pro exactly like this. Lighter frame and higher kv motors and it flies so precise and I'm glad that they decided to actually do a version like this. Very cool!
Nice review and flying. You mention that the camera is a little washed out, but I think part of that might have to do with the DJI goggles + analog module. I have an Air65 that I absolutely love and I fly it with HDZero goggles and a SpeedyBee analogue module. For me the video is very saturated with loads of contrast, so just something to consider. Again, great review, love all the animals 😂
I've really enjoyed my Air 75 ELRS. Its held up much better than my 2024 mobula 6 for a considerably cheaper price. Just check your UFL connection and props after crash before taking off again. Using Tattu 300 HV'S and I usually land at 3.4/3.5v. But when I plug them into my whoopstor, they always read 3.8v. Might need to change a setting in BetaFlight to account for the 4.35v charge.
I see you're using DJI Goggles V2 and was thinking to get a similar set up for my analog drones. Checking out for the AV-in I saw you need to change FPV mode to the FPV Digital system. But then when I switched back to O3 Air Unit I had to re-pair all my Air unit drones. Is it the same for you? If not, how do you do? Thank you.
@@Tonifilmmaker 2.4Ghz is the frequency of the radio. It will need to be capable of elrs version 3, as that's what the Air65 flightcontroller requires to bind to. The Cetus goggle will work
@@Rimzler Yes but the meteor 65 pro has triple or more power, beyond proximity you cannot sacrifice too much power in the vtx since you should also be able to fly behind walls and rooms
I build whoops with motor plugs for convenience and still got whoops down in weight to 17.4 grams and could use peek screws to get it even lighter, good drone but the soldiering is a headache on whoops , if a motor ever goes bad , this drone is definitely not for a newbie 🎉
They did it to save weight and space on the PCB. For the most part, once you have it set up, you don't really need to access Betaflight much anymore. I get your point, but I think any weight savings on a tiny whoop are worth it.
and the reason why your camera view is "washed out" is your very bad reciver on your mask and the poor capacity of dji mask to display annalog, you should try something like orqa or hdo2 with a true D or rapidfire rx
Tried different receivers and goggles, the image is washed out still, it's the camera, with a good camera i see perfect! But you are totally right, DJI goggles are not the best, will put pirx on the pro58, I already did a few years ago ahahah but this one I'm using is stock
Awesome home/back yard
Thank you!☺️
And you saved the crash a lot of times! With a big drone this is impossible, this drone is amazing😍
Ahhaha yes small drones bounce around no problem most times!
It is very nice to see you review a tinywhoop. This betafpv is awesome! Sometime back I had a custom built meteor 65 pro exactly like this. Lighter frame and higher kv motors and it flies so precise and I'm glad that they decided to actually do a version like this. Very cool!
Can it bind to radiomaster pocket elrs please im new to this fpv
Yes elrs 2.4
Looks awesome fun flight. Much fun
I ordered mine a couple days ago im so excited 😍
Gonna have a ton of fun especially during the winter
Fantastic little beast!!! So awesome😂👍🔥!!!
bro is having the time of his life
I'm lucky I can have fun with this stuff hahahah
Yes, this is true, i confirm this, is flying great. Cant wait for the day when we are going to such thing with digital.
I think we are getting something from hdz on sep 10
What analog adaptor you using ?
Can I use 450mah 1s bt2.0 batteries with this?
the smile on your frace :D
After all this years it's still fun!
Want this to be my first drone it looks so nice
😂😂 This drone is really nice and powerful to recover crashes, I like the dog side 😂 it nearly grabbed the drone 🤣
I love Italians!
Ahaha thanks!🤌🍕
That thing is 🔥Amazing🔥Chris Rosser made a Tune for it, it fly’s even beter with it.🔥
Crazy even better than stock😍
@@Rimzler Yeah! amazing this little quad, I can’t get enough of it! 🤣👻
Nice review and flying. You mention that the camera is a little washed out, but I think part of that might have to do with the DJI goggles + analog module. I have an Air65 that I absolutely love and I fly it with HDZero goggles and a SpeedyBee analogue module. For me the video is very saturated with loads of contrast, so just something to consider. Again, great review, love all the animals 😂
Which analog adapter are you using for the V2 goggles?
Wow!!! How did you configure the crash flip!!!??? I am in shock, I have the drone but I didn't know it has turtle mode
Check out the modes tab in betaflight, you can assign a switch to turtle mode!
still confuse between air75 and these, helppp! need to fly outdoor and indoor too haha
9:51 Is the antenna ufl connector is disconnected or broken due to crash ?
It got only disconnected, but not because of crash, but because I was trying to fold the assembly to get lower angle camera
you can fly 3 minutes only?
I've really enjoyed my Air 75 ELRS. Its held up much better than my 2024 mobula 6 for a considerably cheaper price. Just check your UFL connection and props after crash before taking off again.
Using Tattu 300 HV'S and I usually land at 3.4/3.5v. But when I plug them into my whoopstor, they always read 3.8v. Might need to change a setting in BetaFlight to account for the 4.35v charge.
I see you're using DJI Goggles V2 and was thinking to get a similar set up for my analog drones. Checking out for the AV-in I saw you need to change FPV mode to the FPV Digital system. But then when I switched back to O3 Air Unit I had to re-pair all my Air unit drones. Is it the same for you? If not, how do you do? Thank you.
I think I might buy! lol
Analog still the king of Whoops!!!
or at least until HDZ release their new AIO 🤞🤞
Can’t wait for lightweight digital!!
Grazie mille per la recensione! Come fai a bilanciare le batterie? non riesco a trovare un adattatore che mi permetta di collegarle al mio skyrc
Can i bind it with my Stuff from the Cetus Fpv combo?
Is the radio elrs 2.4 compatible?
@@Rimzler Yes on Amazon it says elrs. But not 2.4. I think it should work
@@Tonifilmmaker 2.4Ghz is the frequency of the radio. It will need to be capable of elrs version 3, as that's what the Air65 flightcontroller requires to bind to. The Cetus goggle will work
How i can set up the 400 mw on it , ???
You can access the secret menu by pushing the left stick left and right stick up, from there go into vtx settings and select power level max
If you unscrew the back of the canopy and just let the canopy 'hang', you get a flatter camera angle, I do this and don't notice jello
how are u doing analog on dji xd wat, i dont feel in control.
DJI goggles V2 can use aftermarket patch antennas for analog. I don't think you can do this with the newer Goggles 2 or 3 though.
@@brandon9689 ty bb
Chase chicken!
Always! 🐔🐔🐔🐔🐔
Nice chicken chasing, just don't review any more e-bikes, LOL.
Hahahahahahhahahah thank you☺️ what about chasing chickens with the ebike😅
why is the video tearing so much
Se comporta increible este drone, realmente vuela excelente... lo unico malo es el el vtx, realmente se queda pobre de potencia 😢
Well small drones have always limited vtx power, but they also are for proximity flying
@@Rimzler Yes but the meteor 65 pro has triple or more power, beyond proximity you cannot sacrifice too much power in the vtx since you should also be able to fly behind walls and rooms
Will it work with my goggles 3 and rc3?
Absolutely not
I build whoops with motor plugs for convenience and still got whoops down in weight to 17.4 grams and could use peek screws to get it even lighter, good drone but the soldiering is a headache on whoops , if a motor ever goes bad , this drone is definitely not for a newbie 🎉
I wish Beta FPV would just put the USB C connector directly on their boards and STOP with the dongle!!!
They did it to save weight and space on the PCB. For the most part, once you have it set up, you don't really need to access Betaflight much anymore. I get your point, but I think any weight savings on a tiny whoop are worth it.
and the reason why your camera view is "washed out" is your very bad reciver on your mask and the poor capacity of dji mask to display annalog, you should try something like orqa or hdo2 with a true D or rapidfire rx
you can also just flash your pro58 with a beter firmware like pirx becose it make the image quality a lot beter
Tried different receivers and goggles, the image is washed out still, it's the camera, with a good camera i see perfect!
But you are totally right, DJI goggles are not the best, will put pirx on the pro58, I already did a few years ago ahahah but this one I'm using is stock
@@Rimzler i've try it with hdo2 and image was realy PERFECT
I’m getting the 75. May get the 65 later
Yes probably fly even better for not much size and weight difference 🚀
You don’t like your batteries?
Loool gotta rip them💥💥💥
@@Rimzler lol🤣