Contact area dosen't change friction in physics laws, but it's extra "spring" too. But oil should handle that. You could meter this, how much it takes when starting it without spark plugs, before extra parts and after it. Then you know how much those make more friction when power is metered in watts. If plugs are in place, then there is pressure adding force activity making change too, so that isn't right way.. This is indeed very very interesting topic so many way. In rally and usage cars.. and testing..
I'm thinking this gives more newton's than hp's prosentually, but I'm not sure. This could drop fast when revs go up few thousand and over, that's normal too. Thanks for the testing.
one thing I really like about Vlad's approach is he doesn't try to over-analyze/theorize things. He basically says "OK, this is what we are shooting for. so, let's just put the pieces together and see if it works" very hands-on way of inventing. see what works and what doesn't. then change things around accordingly.
It won't work on that compression, Diesels need 20:1 compression. Plus you would destroy everything else in that engine. Gas engines are not made to withstand Diesel pressures.
I watched your video for adding a extra piston ring for each piston . It is actually a very good idea for making a engine last much longer and having better compression. There used to be a company called Wisconsin Engines.. that made and sold industrial engines to places all over the world, and a lot of the engines that they built were made with the extra compression ring. Those engines were very well built and lasted a very long time.
I watched this video and did the same thing with a 4g63 NA. It did increase the compression and the engine is very powerful. the down side is the engine is very hot, so I upgraded my radiator from 10mm to 16mm and added an auxiliary fan. I drove the car for about 400km and with a powerful engine, it was able the to increase the fuel efficiency aswell. I definitely would recommend this mod.
no matter how old these videos get, i continue to watch them over and over again. I find much comfort in these videos, and i even have some saved for the end of the world. Definitely great experiments to have knowledge of for when we must go back to the older styles in the future
Hello! I'm Brazilian and a mechanic, a few years ago I did the same experiment of putting a second compression ring on my 100 cc motorcycle. It worked almost 95% well, but because the piston was loose in the cylinder! Your experience with this engine was better, congratulations!
In the antique engines I've had a pleasure to restore I've always noticed older engines with three and sometimes four rings one on the bottom and three on the top made the Piston to where it didn't move around or slap.
They got higher compression merely because they machined piston ring in free space above default ones. This decreased volume in cylinder. Lada has low compression ratio because it is designed to run on crap russian fuel - 73 to 78 octane . Modern, high efficient engines have compression ratios like 13:1 and at the same time piston rings are made thinner - to reduce drag on high rpm region. It would be interesting now to take the middle or bottom ring away and repeat the compression test. Also nothing about what gasoline they did use. Given it is carburator engine, and modern fuel, even in Russia, got better recently, increasing compression is just making old lada motor one step closer to modern engines.
It would be cool to not just add a 3rd compression ring to a set of high compression pistons and do a compression test, but then shave the head to add even more compression and see what those small single cam Lada engines can really do with some high compression.
@Karl with a K when you disassemble a engine with a “dizzy” and have to pull it from it’s original orientation you have to adjust the ignition timing by rotating the distributor. They also do some insane modifications to engines that they have to not only play with ignition timing they also need to adjust fuel too.
@Karl with a K you forgot to mention the giant hole in the floor where they put their legs thru, peddle power. More holes in the floor with four people equals more power.
If I remember correctly, Dodge had a problem with their 2006ish era Hemi's they were breaking pistons because the upper ring land was too close to the top. Love these videos and they are always very fun to see👍
@@lamarzimmermanmennonitefar5269 I was excited to see that video. But, his methods of measuring mpg are sloppy at best. I have spent a lot of time and effort to get 31 mpg out of just 2000cc and 2k lbs, I don't believe his results at all. 1.5g is gone in less than 45 min runtime in my 420cc carbureted snow thrower using the smallest main jet for my altitude, I don't see how the same type and size carburetor would magically become hyper efficient when mated to 4000cc of v8. If he wanted to be honest, he would have fitted a temporary fuel container on the hood for all to see, using a single line returnless system. But he won't do that.
All that work for the extra piston ring!!! ...I have a ton of respect for you guys....thank you for the video and the gentleman is right....there might be more cylinder wear....but it is worth it to try... again thank you..!!!
The extra ring being placed at the top of the piston reduces the distance of the (former) top ring, now new top ring, to the cylinder head. This may attribute to increase in compression. You could test for this by making the new top ring grove the same as the former top ring grove, and then using the old rings move the former top ring up to the new top grove, leaving the remaining rings in old positions. Good test, you guys are great.
Not twin carburetor dual fuel injection (dfi) one injector will spray fuel in the intake valve and the other one will inject fuel direco at high pressure then see the results. The result will be mind blowing
@@ayannasir6653 They already have diesel pump injection on a Lada Direct injection is unreliable for gas engines and a twin or triple or quad carb follows old school hot rodding
@@ayannasir6653 Gasoline engine with diesel injection (not direct but on intake ports) You would be having a hard time trying to convert a regular carb or EFI engine into GDI with not much gains to have
Some old engines came with three compression rings, and some industrial/stationary engines still do. I don't think it would be a wear problem - IF - RPM was kept low.
Also tall deck big block chevy's. May be some info there being as they were mass produced. To add to their strangeness, those engines only used centrifugal (engine speed) advance too; no vacuum advance.
Seems to me by adding a small amount of 2 smoke oil to the fuel should take care of the cylinder bore wear. Been doing that in my PT for years, and even after almost 21 years, they still look almost new with the crosshatch.
Interesting thing in regards to piston rings. If you know you're going to abuse the crap out of a motor, like in a demolition derby, you file the rings open a bit so when it starts to overheat and the rings expand, the piston don't seize.
A lot of work to get an extra few minutes from a car your destroying🤔🤷. Why would you fully tear down an engine prior to entering a derby???. Ya can run it on 2 stroke and delete the radiator altogether so it just circulates thru the pipe and run the interior heater on full blast. One smack in the front and all your waters gone with a radiator in there.
My friends have been running dozens of derbies a year for decades, like 4 generations. They drive all over the country to get cars. They typically use the same built up 4 bolt main 4 barrel small block chev for years. Once they go through the engine, it can handle an entire event with no coolant and then do it again next weekend. They also know where to reinforce and where to cut to get the car to fold the way they want. It's actually quite involved, way more involved than I realized
I would be curious how much the power would increase if you use a 200 hp 3.0 V6 and add another piston ring to it. I assume it would be at least be 250 to 300 hp.
Awesome Idea, the only thing I would be worried about is if the engine ever gets overheated the compression may bend the top of the piston around that ring without the extra 5-10 mm of structure above it. Obviously it wasn’t a problem in normal operation though. I’m going to install an extra set of rings on my Prius right now! 👏🏻👏🏻👏🏻😂
An interesting result! I find myself wondering, though, whether the compression comes from the third ring being extra, or from it being new. What would the expected compression be with the standard two rings per cylinder, if all the rings were brand new?
imo I think a good portion of the compression increase is because the 3rd ring is above the original 2 thus reducing the clearance volume of the cylinder
Likely because it's new and cylinder wall are not worn at the top of the sleeves Number of ring really does not matter most high performance dirt bike engine use only 1 compression ring for less friction and more power really important for a one cylinder 250cc or 450cc
@@buttadog5073 I'd thought of that too, but it seems like the volume in question (distance above the second ring times the annular area between piston and cylinder) would be small compared to the volume between piston and head at TDC, at least for a relatively low compression engine such as this one. Just spitballin'; I don't know much about the geometry of a Lada engine....
By putting a ring on the top, you basically decreased the volume in the cylinder, that's why you have higher compression. If you want to see the effect only for the ring, this should be put somewhere below the original ones. This experiment is somehow equivalent with rectifying the cylinder head or mounting a thinner cylinder gasket.
Agreed, I was going to mention that same thing! Also if the added ring is brand new it will skew the results since the old two rings are presumably worn to a degree.
lmao when I saw this one😂😂 I love how Vlad and the team actually make it happen. Salute✊ This is my all time favourite channel and just an awesome group of guys. would love to meet one day. appreciate what you guys do👍 All the way from South Africa
sniff,sniff, I miss my Lada , mostly miss that knob on the dash that allowed you to adjust the headlights , lots of deer around here , that extra night vision range saved more than one of them .
This was very interesting. I can see two things that could be interesting to test and that is to just swap out one piston ring to see what that does for compression. Then try enlarging the groove for the first piston ring and add a second ring in that. I've seen that arrangement on an engine, I think it was a motorcycle engine but can't be sure. That would minimize the problem with weakening the piston, or at least I think it would... Question is if it would be as effective and if there would be some other side effect such as a shorter life span for the piston rings. Finally it might be enlightening to replace the old piston rings on the piston version that works best and hone the cylinders so they can wear in properly and see if that improves the compression even more or if it's as good as it gets. Heck even just swapping in two new piston rings and hone the cylinder may give interesting results as it would show the best possible compression with the standard two piston rings. And now I've read through this and realize just how much work all of this would take. Perhaps just replacing the two original piston rings and honing the cylinders just to see if there is still something to gain there. Not ever having worked on one of these engines I have no idea what the standard compression is supposed to be. If it's close to the original values then swapping the rings and honing the cylinder is not likely to improve things much, right? Edit: Oh and a lot of people ask for dyno testing. If that's not easily done then perhaps just some acceleration tests before and after might give some idea of if the effect changed. Given that this is a rather small engine and car even small changes in engine power should be easy to measure that way.
When you first mentioned another ring, I was worried that you had forgotten that the previous top ring had already created a step that the new ring might object to. Then you showed that you had recently rebored and honed it, so I quit worrying.
This together with skimming the head by like 1.5 mm, change gasket for a metal one that handles higher compression could be interesting too see together with maybe a fuel injection system added in with a higher pressure fuel pump & a more aggressive cam. Kind of test the limits of the stock cylinders, crank etc a bit further.
Great idea, in an old engine the rings would be worn anyway so I wouldn't worry that much about extra wear. This would help an engine last a really long time before a rebuild. I wonder if this would help with people who have vintage cars and worn cylinders since boring can be so expensive.
So great! How about welding up bigger lobes on a Lada Cam for more lift and duration if you haven't done that already? combine with high compression to equal a fun machine!
Hey there how you doing I hope everything's well on everybody doing okay I had to get my garage 54 fix now I'm going to be doing real good I get to watch another awesome 107% videos success you make stuff happen you're awesome thank you again you and your team
Oh Yes!! I saw a lada in South Africa. Johannesburg to be exact. I smiled so much and instantly thought of the Garage 54 team💪 legends...and one tough car I'll tell u that. Russian Engineering 👌
That 3rd comp. ring is helping the pistons to stay in line with the cylnders better, along with the increased compression, if you add some racing fuel it's going to perform like it never has before. If the top of the pistons don't pop off it will likely go for a lot longer and be more efficient as well (less fuel consumption). 👏👏👍👍😎😎🏁🏁💯 I WANT A LADA NOW !!!
@@GunMetalEngineerANSWER: Because it makes the engines last longer, more powerful & wastes less fuel and oil. The US Auto industry went to 💩 in 1974 thanks to the EPA. After that 💩 remember the 80s' when the US Automotive industry said Electronic Fuel Injection was Brand New? They lied, Their version (Brand) was New but wasn't really a true EFI it was a throttle body system, which is essentially a throttle plate with 1 or 2 injectors spraying down into the TB. Mercedes Benz had EFI in the 1960s, they stopped using it because it was too much trouble to keep it maintained to proper working order. They MB, went with a newer better Fuel injection system in 1977 if I remember correctly, called C.S.I. which stands for Continuous Injection System no computer was needed to make it work more efficient. Check what I've said if you don't believe me.
You are smart guys. The reality is that increased compression helps, but, you also need to take into account the extra friction. If you can overcome the extra friction then extra compression does help.
I've been following your channel for a while all respect 😉. In my opinion you can make Lada go fast , but the general issue is when you gain speed ..... Bolt joints! As we all know that's weak place , crack me on I've seen someone going 160 and after they walk out of the vehicle the result was having a sweat and full trousers . lots of love and admiration for your hard work ! Btw the lada was fitted with fiat gear box ....
When I was rebuilding John deere diesels they moved the top ring to just about 1/8" from the top compared to 1/2". They claimed higher HP and better starting, they were right! It eliminated the volume of air above the ring, thus increasing compression but also eliminated a large area of cold metal that the air could touch. Starting in about half the time.
Alot of british sports cars had three rings plus the oil control ring, that was 50 years ago, some new stuff comes and goes like those racing pistons that only use a special top ring and the three piece oil control ring, adding more rings is a band aide for piston rock plus more friction
You can always regrind a stock camshaft core with a smaller base circle. It's limited how much you can grind but it's done often and is a cheaper option
I am totally nit surprised. The 366/427 Chevrolet tall block motors use 3 compression rings and an oil control ring. They do it in order to cool the pistons better. Actually the cylinders wear less with the extra ring.
Damn that is impressive. How about next you get custom made forged pistons and modify design a bit to have 4 rings but their combined surface area against the cylinder wall is same as of 3 originals? That should prevent excessive wear. Also after that start looking into making LSD rear axles using parts around the garage. One that is easy to build your self and gives best perfomance and price. Welding the diff will cause wear on both axle well as tires so might not want to do that, but LSD would give best of two worlds. Saw one guy make one from two plates and i believe those were valve springs he put in there. If i recall right it was 4 springs. To install he put springs into vise, tied them closed with some wire, made two plates that had locating pins and holes for the springs, put it in place assembled and cut the wires.
6 cylinder Lada, with the 3 rings pistons and diesel pump, even better if you take a compressor, either from an AC or any other thing, and add it as a force induction.
That ring at the bottom is an oil control ring, meant to control or minimize excessive oil consumption ( a type of reverse blow-by situation) and promote a cleaner burn.
I’m not surprised you guys saw an increase! Remember that car uses an old inefficient carburetor, and by increasing compression logically you helped efficiency and fuel burn. I wouldn’t be surprised if you guys picked up 3-5 horsepower if not more from the 20+ pound increase in compression. I can’t see the extra rings being too bad of a problem. Knowing about how old the car is, this is probably an old cast iron engine with cast iron cylinders/liners. They’re the best durability wise. I say put this engine in a street legal non trashed Lada or a car you guys actually use and put this engine to work. See how long it lasts, as that’s what I’d do. Well done again!
im here from the rubber ring video. and the electric turbo video. you need the put the turbo button and gas button under the gas pedal so both get pressed when you push to the floor. BOOM problem solved
These guys are just fantastic. I love this channel. question: did they install new bearing surfaces on the crank side ? .. if so that might have been the reason for some of the increased compression PSI.
Maybe keep going with that engine, port out the heads and fabricate some performance parts and fit them to the engine. See how much power you can make with this engine. You guys are good at making parts
I am one of the flowers to your channel and super like your experiments. I have seen many videos on RUclips on how separate hydrogen from water and make is as an official green fuel to vehicle, so i am Waiting for another and new experiment that showed in simple way how to separate hydrogen from water and make it as fuel to the vehicle by injecting the hydrogen to the intake or any other part in the vehicle and make it as kind of hybrid vehicle and get a good gas mileage.
That would be like using that cylinder to work like a turbo, because the AFM would not get ignited as there is no spark and the compressed mixture will be pushed back into the intake manifold to be supplied to the the other three cylinders in the next cycles. Only worry would be to avoid any blowback reaching/crossing the throttle.. Great idea though!! 👌👍
The problem that the turbo only blows instead the piston is suck and blow. you can control with valve wich would be open only when blow, but then you miss one clycle.
Wow, nice results, test to drive it long time. Don't just try to kill it. It sounds even better than original. Use something over 90 octane bensin.. or even alcohol.
As the English language G54 videos are usually released months (Or occasionally years) After the Russian ones, I'm now curious if they ever did a follow up video on this? It would have been interesting if they'd dropped the engine in a daily drive and popped it back open to double check everything a year or so later (Assuming nothing went catastrophically wrong with it during this testing phase). I can't work out if the edges of the crown would start breaking off, if the edges would bowl down and trap the top ring, or if the edge of the crown would be SUPPORTED by the extra ring and the engine would still be fine after 12 months use. I can't be the only one who'd be really interested to see a long term test follow up video, can I?
@@henninghoefer Jesus, Well spotted. It didn't click in my head that the bit you mentioned WAS from a security camera (Bloody obvious now I've rewatched it) ! :D Until I actually clicked on the time stamp in your comment I couldn't even have said what footage you were talking about.
Now combine this with the alternator driven supercharger, diesel pump injection and some E85.
Yes do this!
Yessssss
Now its need to fit that diesel high pressure pump and put on dyno 💪
That
yep, then Dyno it
I wish you guys had a dyno for this experiment it would be nice to see the hp gains on paper !!
It had 115 psi then it went to 135 psi. It would of only picked up a few hp at most
@@k3bigwink1escambourn5 agreed.
But 5 extra horses in a 60 horse engine is a big gain.... especially with only 18 rubles worth of parts.
Extra compression making more horsepower versus extra friction taking it away. I wonder which would win?
Contact area dosen't change friction in physics laws, but it's extra "spring" too. But oil should handle that. You could meter this, how much it takes when starting it without spark plugs, before extra parts and after it. Then you know how much those make more friction when power is metered in watts. If plugs are in place, then there is pressure adding force activity making change too, so that isn't right way..
This is indeed very very interesting topic so many way. In rally and usage cars.. and testing..
I'm thinking this gives more newton's than hp's prosentually, but I'm not sure. This could drop fast when revs go up few thousand and over, that's normal too.
Thanks for the testing.
one thing I really like about Vlad's approach is he doesn't try to over-analyze/theorize things. He basically says "OK, this is what we are shooting for. so, let's just put the pieces together and see if it works"
very hands-on way of inventing. see what works and what doesn't. then change things around accordingly.
yeah and hes thorough enough to go over all the variables, like a great scientist
You guys should put the high pressure diesel pump on the three compression rings engine and see what happens. That would be awesome !
Do that!
Lada race setup?
It won't work on that compression, Diesels need 20:1 compression.
Plus you would destroy everything else in that engine.
Gas engines are not made to withstand Diesel pressures.
@@VeggiePower303 watch their last video, they run it with two stroke mix
Ahh yeah, i dig that, that would be a good successful experiment
Garage 54 is the Most underrated RUclips channel ever
I watched your video for adding a extra piston ring for each piston .
It is actually a very good idea for making a engine last much longer and having better compression.
There used to be a company called
Wisconsin Engines.. that made and sold industrial engines to places all over the world, and a lot of the engines that they built were made with the extra compression ring.
Those engines were very well built and lasted a very long time.
I watched this video and did the same thing with a 4g63 NA. It did increase the compression and the engine is very powerful. the down side is the engine is very hot, so I upgraded my radiator from 10mm to 16mm and added an auxiliary fan. I drove the car for about 400km and with a powerful engine, it was able the to increase the fuel efficiency aswell.
I definitely would recommend this mod.
You need to dyno some of your experiments and also do testing such as mpg. See if it increases or decreases.
I like it better how it is. Keep it moving. It either sorta works or works or doesn't.
Dyno is too much. Plus those ladas will probably break it
Russia is a civilized country, they use liters/100km lol
Dyno is useless excect for measuring large gains and if can't feel them without the dyno saying different then it wasn't worth it anyway 🤷♂️
This channel is just translation and I doubt the actual channel even comes here.
This channel always makes me want a Lada
no matter how old these videos get, i continue to watch them over and over again. I find much comfort in these videos, and i even have some saved for the end of the world. Definitely great experiments to have knowledge of for when we must go back to the older styles in the future
I have never thought of this and i think it's amazing that you guys get so much experience and actual usable results.
hey guys lets try experimenting with a lawn mower motor🤣
Hello! I'm Brazilian and a mechanic, a few years ago I did the same experiment of putting a second compression ring on my 100 cc motorcycle. It worked almost 95% well, but because the piston was loose in the cylinder!
Your experience with this engine was better, congratulations!
In the antique engines I've had a pleasure to restore I've always noticed older engines with three and sometimes four rings one on the bottom and three on the top made the Piston to where it didn't move around or slap.
There is a downside to this, like faster cylinder wear. I remember people taking out 1 compression ring from some Perkins engines.
The downside is decreased efficiency and increased drag. And also increased cylinder wear. The cross-hatching would wear away much faster
They got higher compression merely because they machined piston ring in free space above default ones. This decreased volume in cylinder.
Lada has low compression ratio because it is designed to run on crap russian fuel - 73 to 78 octane .
Modern, high efficient engines have compression ratios like 13:1 and at the same time piston rings are made thinner - to reduce drag on high rpm region.
It would be interesting now to take the middle or bottom ring away and repeat the compression test. Also nothing about what gasoline they did use.
Given it is carburator engine, and modern fuel, even in Russia, got better recently, increasing compression is just making old lada motor one step closer to modern engines.
It would be cool to not just add a 3rd compression ring to a set of high compression pistons and do a compression test, but then shave the head to add even more compression and see what those small single cam Lada engines can really do with some high compression.
Most standard way of increasing compression.. but this garage does nothing like anything standard..
@Karl with a K when you disassemble a engine with a “dizzy” and have to pull it from it’s original orientation you have to adjust the ignition timing by rotating the distributor. They also do some insane modifications to engines that they have to not only play with ignition timing they also need to adjust fuel too.
twin carb twin carb
@Karl with a K you forgot to mention the giant hole in the floor where they put their legs thru, peddle power.
More holes in the floor with four people equals more power.
@@South_0f_Heaven_ Jabbadabadooo!
Im almost certain these guys have a warehouse of lada gaskets, they use them in every single video
A warehouse full of Lada cars..😄
@@raybin6873 garbage of full lada cars. That car in condition like on video in Russia costs about 400-600 dollars
If I remember correctly, Dodge had a problem with their 2006ish era Hemi's they were breaking pistons because the upper ring land was too close to the top. Love these videos and they are always very fun to see👍
Some of the boosted Subaru engines are notorious for this as well.
Do some mpg modification testing. Lawn mower carb, skinny tires, whatever.
Check out Thunderhead289. He has a mower carb on a muscle car
@@lamarzimmermanmennonitefar5269 I was excited to see that video. But, his methods of measuring mpg are sloppy at best. I have spent a lot of time and effort to get 31 mpg out of just 2000cc and 2k lbs, I don't believe his results at all.
1.5g is gone in less than 45 min runtime in my 420cc carbureted snow thrower using the smallest main jet for my altitude, I don't see how the same type and size carburetor would magically become hyper efficient when mated to 4000cc of v8.
If he wanted to be honest, he would have fitted a temporary fuel container on the hood for all to see, using a single line returnless system. But he won't do that.
All that work for the extra piston ring!!! ...I have a ton of respect for you guys....thank you for the video and the gentleman is right....there might be more cylinder wear....but it is worth it to try...
again thank you..!!!
The extra ring being placed at the top of the piston reduces the distance of the (former) top ring, now new top ring, to the cylinder head. This may attribute to increase in compression. You could test for this by making the new top ring grove the same as the former top ring grove, and then using the old rings move the former top ring up to the new top grove, leaving the remaining rings in old positions. Good test, you guys are great.
Dyno before and after would be brilliant 😇😇😇
Now make domed billet pistons (or mill the head) to see how much more compression can be had. Lada NA with twin carburetor! Max torque!
Not twin carburetor dual fuel injection (dfi) one injector will spray fuel in the intake valve and the other one will inject fuel direco at high pressure then see the results. The result will be mind blowing
@@ayannasir6653 They already have diesel pump injection on a Lada
Direct injection is unreliable for gas engines and a twin or triple or quad carb follows old school hot rodding
@@ruikazane5123 oh i think that this is a gasoline engine but this is diesel engine
@@ayannasir6653 Gasoline engine with diesel injection (not direct but on intake ports)
You would be having a hard time trying to convert a regular carb or EFI engine into GDI with not much gains to have
Nice. Now I would like to see 2 rings in 1 groove with the gaps 180 degrees apart
Yes please
I always thought that the ring gaps would migrate. I guess I thought wrong.
They'll end up with the gaps in the same place
Oiling to that top ring may be an issue. Interesting idea tho.
you can always put a small pin in the gap to keep the rings from rotating.
Medium duty & Heavy duty
GM 366 & 427 V8 gas has 4 rings.
1950’s-1970’s GMC
Big Block 478 V6 gas or diesel
has 4 rings.
Big block V6?
I was about to post this lol
@@applepoop10 yes V6. Gmc also made a 637 cui V8 and a 702 V12
Some old engines came with three compression rings, and some industrial/stationary engines still do. I don't think it would be a wear problem - IF - RPM was kept low.
Also tall deck big block chevy's. May be some info there being as they were mass produced. To add to their strangeness, those engines only used centrifugal (engine speed) advance too; no vacuum advance.
Seems to me by adding a small amount of 2 smoke oil to the fuel should take care of the cylinder bore wear.
Been doing that in my PT for years, and even after almost 21 years, they still look almost new with the crosshatch.
Bravo team. Well thought out and 10/10 for Vlad’s presentation methods.
Always a pleasure to view this channel.
I love this channel. 😀
Could sleeve the cylinders so it's easy to repair when it gets worn out.
Interesting thing in regards to piston rings. If you know you're going to abuse the crap out of a motor, like in a demolition derby, you file the rings open a bit so when it starts to overheat and the rings expand, the piston don't seize.
Maybe even put some 2 cycle oil in the gas to help with lubricating that top ring.
Good idea 💡👍
A lot of work to get an extra few minutes from a car your destroying🤔🤷. Why would you fully tear down an engine prior to entering a derby???. Ya can run it on 2 stroke and delete the radiator altogether so it just circulates thru the pipe and run the interior heater on full blast. One smack in the front and all your waters gone with a radiator in there.
@@brotang2953 do they even allow radiators in demo derbys?
My friends have been running dozens of derbies a year for decades, like 4 generations. They drive all over the country to get cars. They typically use the same built up 4 bolt main 4 barrel small block chev for years. Once they go through the engine, it can handle an entire event with no coolant and then do it again next weekend. They also know where to reinforce and where to cut to get the car to fold the way they want. It's actually quite involved, way more involved than I realized
The translator "SwapBlogRU" has the perfect voice for his job 😂
Your shop has a new business , adding piston rings to,engines.
I would be curious how much the power would increase if you use a 200 hp 3.0 V6 and add another piston ring to it. I assume it would be at least be 250 to 300 hp.
Awesome Idea, the only thing I would be worried about is if the engine ever gets overheated the compression may bend the top of the piston around that ring without the extra 5-10 mm of structure above it. Obviously it wasn’t a problem in normal operation though. I’m going to install an extra set of rings on my Prius right now! 👏🏻👏🏻👏🏻😂
An interesting result!
I find myself wondering, though, whether the compression comes from the third ring being extra, or from it being new.
What would the expected compression be with the standard two rings per cylinder, if all the rings were brand new?
imo I think a good portion of the compression increase is because the 3rd ring is above the original 2 thus reducing the clearance volume of the cylinder
Likely because it's new and cylinder wall are not worn at the top of the sleeves
Number of ring really does not matter most high performance dirt bike engine use only 1 compression ring for less friction and more power really important for a one cylinder 250cc or 450cc
@@buttadog5073 likely probable
@@buttadog5073 I'd thought of that too, but it seems like the volume in question (distance above the second ring times the annular area between piston and cylinder) would be small compared to the volume between piston and head at TDC, at least for a relatively low compression engine such as this one. Just spitballin'; I don't know much about the geometry of a Lada engine....
@@ericwilner1403 Some of that, plus maybe some reduction in blowby.
I love how you answer questions that I never had.
Amazing content. Keep up the good work...
What a channel! These guys doing the things most men in the world think about on a daily basis
By putting a ring on the top, you basically decreased the volume in the cylinder, that's why you have higher compression. If you want to see the effect only for the ring, this should be put somewhere below the original ones. This experiment is somehow equivalent with rectifying the cylinder head or mounting a thinner cylinder gasket.
Agreed, I was going to mention that same thing! Also if the added ring is brand new it will skew the results since the old two rings are presumably worn to a degree.
Exactly right.
Third One to type that i was just about type in desame message.
lmao when I saw this one😂😂 I love how Vlad and the team actually make it happen. Salute✊
This is my all time favourite channel and just an awesome group of guys. would love to meet one day.
appreciate what you guys do👍
All the way from South Africa
Same here bro, From SA
Top Gear was the only show that compares. Good work Vlad!!
@@Trevor24 Fede✊
So this time you guys actually made an inprovement on a Lada. Good work!
They did it when adding the diesel injection pump as well
you guys should really have a dyno by now !
👋😂👍I’m convinced!! Lada’s are indestructible!! That was awesome!
The suggestions on this channel are amazing.
sniff,sniff, I miss my Lada , mostly miss that knob on the dash that allowed you to adjust the headlights , lots of deer around here , that extra night vision range saved more than one of them .
great test!!
Many newer cars put the rings closer to the top the way you did. It is better for pollution, but you also increased compression.
you add two more rings and magically your engine has 50 times more torque and explodes yay
Do another but with two rings in a wider top groove.
Loved the experiment.
This was very interesting. I can see two things that could be interesting to test and that is to just swap out one piston ring to see what that does for compression. Then try enlarging the groove for the first piston ring and add a second ring in that. I've seen that arrangement on an engine, I think it was a motorcycle engine but can't be sure. That would minimize the problem with weakening the piston, or at least I think it would...
Question is if it would be as effective and if there would be some other side effect such as a shorter life span for the piston rings.
Finally it might be enlightening to replace the old piston rings on the piston version that works best and hone the cylinders so they can wear in properly and see if that improves the compression even more or if it's as good as it gets.
Heck even just swapping in two new piston rings and hone the cylinder may give interesting results as it would show the best possible compression with the standard two piston rings.
And now I've read through this and realize just how much work all of this would take. Perhaps just replacing the two original piston rings and honing the cylinders just to see if there is still something to gain there. Not ever having worked on one of these engines I have no idea what the standard compression is supposed to be. If it's close to the original values then swapping the rings and honing the cylinder is not likely to improve things much, right?
Edit: Oh and a lot of people ask for dyno testing. If that's not easily done then perhaps just some acceleration tests before and after might give some idea of if the effect changed. Given that this is a rather small engine and car even small changes in engine power should be easy to measure that way.
The whole engine and its internals looks so fresh!
When you first mentioned another ring, I was worried that you had forgotten that the previous top ring had already created a step that the new ring might object to. Then you showed that you had recently rebored and honed it, so I quit worrying.
There was a noticeable change. Good one!
This together with skimming the head by like 1.5 mm, change gasket for a metal one that handles higher compression could be interesting too see together with maybe a fuel injection system added in with a higher pressure fuel pump & a more aggressive cam.
Kind of test the limits of the stock cylinders, crank etc a bit further.
I love you guys because you are FEARLESS when it comes to redesigning or trying new things.. :)
Great idea, in an old engine the rings would be worn anyway so I wouldn't worry that much about extra wear. This would help an engine last a really long time before a rebuild. I wonder if this would help with people who have vintage cars and worn cylinders since boring can be so expensive.
Before and after on a dyno would be great. Thanks for the video
Just what I thought of when I was younger. Excellent!
So great! How about welding up bigger lobes on a Lada Cam for more lift and duration if you haven't done that already? combine with high compression to equal a fun machine!
I doubt it, because it's just another of the same ring. That's my prediction, now to watch the video!
Seems I was wrong. Nice work on this one!
You guys make me want a lada more and more. Not for daily use, but rather an end of the world vehicle
Hey there how you doing I hope everything's well on everybody doing okay I had to get my garage 54 fix now I'm going to be doing real good I get to watch another awesome 107% videos success you make stuff happen you're awesome thank you again you and your team
Oh Yes!! I saw a lada in South Africa. Johannesburg to be exact. I smiled so much and instantly thought of the Garage 54 team💪
legends...and one tough car I'll tell u that. Russian Engineering 👌
That 3rd comp. ring is helping the pistons to stay in line with the cylnders better, along with the increased compression, if you add some racing fuel it's going to perform like it never has before. If the top of the pistons don't pop off it will likely go for a lot longer and be more efficient as well (less fuel consumption). 👏👏👍👍😎😎🏁🏁💯 I WANT A LADA NOW !!!
@@GunMetalEngineer because they would last longer than needed.
@@GunMetalEngineerANSWER: Because it makes the engines last longer, more powerful & wastes less fuel and oil.
The US Auto industry went to 💩 in 1974 thanks to the EPA. After that 💩 remember the 80s' when the US Automotive industry said Electronic Fuel Injection was Brand New? They lied, Their version (Brand) was New but wasn't really a true EFI it was a throttle body system, which is essentially a throttle plate with 1 or 2 injectors spraying down into the TB. Mercedes Benz had EFI in the 1960s, they stopped using it because it was too much trouble to keep it maintained to proper working order.
They MB, went with a newer better Fuel injection system in 1977 if I remember correctly, called C.S.I. which stands for Continuous Injection System no computer was needed to make it work more efficient. Check what I've said if you don't believe me.
You are smart guys. The reality is that increased compression helps, but, you also need to take into account the extra friction. If you can overcome the extra friction then extra compression does help.
I love this channel, I'd love to have these guys at my shop so they could play with some American big block motors in some muscle cars
the lada is the better engine with fiat roots
Build two stroke lada engine.
That's a trabant
@@gytax01 no, from four stroke to two stroke water cooled engine.
@@blazodelic359 yeah, it was a joke.
I've been following your channel for a while all respect 😉. In my opinion you can make Lada go fast , but the general issue is when you gain speed ..... Bolt joints! As we all know that's weak place , crack me on I've seen someone going 160 and after they walk out of the vehicle the result was having a sweat and full trousers . lots of love and admiration for your hard work ! Btw the lada was fitted with fiat gear box ....
Why do you guys work so HARD-another vrry good show
When I was rebuilding John deere diesels they moved the top ring to just about 1/8" from the top compared to 1/2". They claimed higher HP and better starting, they were right! It eliminated the volume of air above the ring, thus increasing compression but also eliminated a large area of cold metal that the air could touch. Starting in about half the time.
Now You can mount a turbo and set it on a dyno🤩 just love the way how you works on cars
Alot of british sports cars had three rings plus the oil control ring, that was 50 years ago, some new stuff comes and goes like those racing pistons that only use a special top ring and the three piece oil control ring, adding more rings is a band aide for piston rock plus more friction
Now please measure the horse power with this modification. I’m so curious to see the before and after.
can you make a performance camshaft from a standard camshaft..is it possible?😮..awesome videos!
regrinding stock cams is pretty common. Lots of racers busted for cheating in stock engine classes for doing it
make a ridiculous degree cam😂😂push the valves to the limit and see what the outcome is👍...power Gains that is.
Yes, it's possible. Watch Le Dan channel from Indonesia, that guy is another gem when it comes to engine mods..
Also do watch "Restoration of Everything" channel, you'll be amused for sure
You can always regrind a stock camshaft core with a smaller base circle. It's limited how much you can grind but it's done often and is a cheaper option
Garage54 should do a toolbox tour, I bet there's some really cool stuff in there!
I am totally nit surprised. The 366/427 Chevrolet tall block motors use 3 compression rings and an oil control ring. They do it in order to cool the pistons better. Actually the cylinders wear less with the extra ring.
I would love to see them weld up that dish on the piston then do a before and after dyno test!
I really want to see a follow up to this video after some months of hard driving on it.... this is pretty cool.
Love your channel, you are missing something. The compression is higher as their is less piston crown decreasing the cc in the chamber volume.
Personally, I'm hoping for at least a 107% success rate! :)
Gotta have a 107% success rate!
This was a good one... I want to see you try this with different cars.
this is definetly one I'm going to consider for my sx3 aerio
Great experiment
Damn that is impressive. How about next you get custom made forged pistons and modify design a bit to have 4 rings but their combined surface area against the cylinder wall is same as of 3 originals? That should prevent excessive wear. Also after that start looking into making LSD rear axles using parts around the garage. One that is easy to build your self and gives best perfomance and price. Welding the diff will cause wear on both axle well as tires so might not want to do that, but LSD would give best of two worlds. Saw one guy make one from two plates and i believe those were valve springs he put in there. If i recall right it was 4 springs. To install he put springs into vise, tied them closed with some wire, made two plates that had locating pins and holes for the springs, put it in place assembled and cut the wires.
Holly cow what a unit! This is so good
Good job guys! Very good work and interesting video as always! Cheers from Jackson Mississippi, USA 🇺🇸
I never would have guessed you would be working with a Lada!
6 cylinder Lada, with the 3 rings pistons and diesel pump, even better if you take a compressor, either from an AC or any other thing, and add it as a force induction.
That ring at the bottom is an oil control ring, meant to control or minimize excessive oil consumption ( a type of reverse blow-by situation) and promote a cleaner burn.
I’m not surprised you guys saw an increase! Remember that car uses an old inefficient carburetor, and by increasing compression logically you helped efficiency and fuel burn. I wouldn’t be surprised if you guys picked up 3-5 horsepower if not more from the 20+ pound increase in compression. I can’t see the extra rings being too bad of a problem. Knowing about how old the car is, this is probably an old cast iron engine with cast iron cylinders/liners. They’re the best durability wise.
I say put this engine in a street legal non trashed Lada or a car you guys actually use and put this engine to work. See how long it lasts, as that’s what I’d do.
Well done again!
im here from the rubber ring video. and the electric turbo video. you need the put the turbo button and gas button under the gas pedal so both get pressed when you push to the floor. BOOM problem solved
Wow who would have thought 💭🤔! Great job guys, thank you for your GREAT CONTENT!!
So my question is will it last? Will the top ring get enough oil? Great test!
Cleanest Lada engine I've ever seen on this channel
I recon this would make a lot of sense in a diesel since the fuel is basically oil and you can need any bit of compression you can get
These guys are just fantastic. I love this channel. question: did they install new bearing surfaces on the crank side ? .. if so that might have been the reason for some of the increased compression PSI.
Maybe keep going with that engine, port out the heads and fabricate some performance parts and fit them to the engine. See how much power you can make with this engine. You guys are good at making parts
I am one of the flowers to your channel and super like your experiments. I have seen many videos on RUclips on how separate hydrogen from water and make is as an official green fuel to vehicle, so i am Waiting for another and new experiment that showed in simple way how to separate hydrogen from water and make it as fuel to the vehicle by injecting the hydrogen to the intake or any other part in the vehicle and make it as kind of hybrid vehicle and get a good gas mileage.
Remove a spark plug and an injector for one cylinder then modify the header for that cylinder to redirect the air it pushes out back into the intake
And to make it pump air not just internally pressurize it
It would still work, with a little bit of carb tuning, even the efficiency might improve
That would be like using that cylinder to work like a turbo, because the AFM would not get ignited as there is no spark and the compressed mixture will be pushed back into the intake manifold to be supplied to the the other three cylinders in the next cycles. Only worry would be to avoid any blowback reaching/crossing the throttle.. Great idea though!! 👌👍
The problem that the turbo only blows instead the piston is suck and blow. you can control with valve wich would be open only when blow, but then you miss one clycle.
You should tune a Lada to run 95% Vodka(ethanol) with both ignition timing and air/fuel ratio adjustment.
Yes 👍
Wow, nice results, test to drive it long time. Don't just try to kill it. It sounds even better than original. Use something over 90 octane bensin.. or even alcohol.
In Scotland, I try ordering a timing chain tensioner for Lada engine, the guy in shop thought I had a pedalo car
As the English language G54 videos are usually released months (Or occasionally years) After the Russian ones, I'm now curious if they ever did a follow up video on this?
It would have been interesting if they'd dropped the engine in a daily drive and popped it back open to double check everything a year or so later (Assuming nothing went catastrophically wrong with it during this testing phase). I can't work out if the edges of the crown would start breaking off, if the edges would bowl down and trap the top ring, or if the edge of the crown would be SUPPORTED by the extra ring and the engine would still be fine after 12 months use.
I can't be the only one who'd be really interested to see a long term test follow up video, can I?
just checked it. russian version of this video was released 2 weeks ago.
@@lordmmx1303 Damn. There goes any chance of finding an update some time soon then. :(
You can see in the security camera footage at 12:36 that this was filmed less than a month ago.
@@henninghoefer Jesus, Well spotted. It didn't click in my head that the bit you mentioned WAS from a security camera (Bloody obvious now I've rewatched it) ! :D
Until I actually clicked on the time stamp in your comment I couldn't even have said what footage you were talking about.
Vehicle that can also be used as a boat. Let's see it done this summer!
Great video, as always. So now I need a four ringed Lada. I am not sure if I can find one in Florida.
A Florida man in a Lada is such a Florida man thing to do ngl😂
You can probably add timing and higher octane fuel for even MORE power!